Fabrication of novel thermo-responsive electrospun nanofibrous mats and their application in bioseparation

To fulfill the development of biotechnology and biomedicine, environmental-responsive polymer materials are wanted for isolation and purification of biomolecules. Herein, a novel thermo-responsive poly(methyl methacrylate) (PMMA)/poly(N-isopropylacrylamide) (PNIPAM) blend nanofibrous mat was developed, which can adsorb and release a model solute, bovine serum albumin (BSA), through the way of hydrophilicity–hydrophobicity transition behavior of PNIPAM. The uniform bead-free electrospun nanofibers were obtained from the homogeneous PMMA solution in the presence of different amount of PNIPAM. Scanning electron microscopy (SEM) analysis showed that the electrospinnability of PMMA was improved by the addition of PNIPAM, and the diameter of resultant nanofibers could be modulated by controlling the amount of PNIPAM. The thermo-responsive swelling behavior of the blend nanofibrous mats was reversible and reproducible by changing environmental temperature across the lower critical solution temperature (LCST) of PNIPAM. Moreover, the separation property of the blend nanofibrous mats was found to be related to the amount of PNIPAM as well as the concentration of BSA. As for a better separation effect, the nanofibers with higher content of PNIPAM were favorable.     

Synthesis and characterization of well‐defined diblock and triblock copolymers of poly(N‐isopropylacrylamide) and poly(ethylene oxide)

Well‐defined diblock and triblock copolymers composed of poly(N‐isopropylacrylamide) (PNIPAM) and poly(ethylene oxide) (PEO) were successfully synthesized through the reversible addition–fragmentation chain transfer polymerization of N‐isopropylacrylamide (NIPAM) with PEO capped with one or two dithiobenzoyl groups as a macrotransfer agent. ¹H NMR, Fourier transform infrared, and gel permeation chromatography instruments were used to characterize the block copolymers obtained. The results showed that the diblock and triblock copolymers had well‐defined structures and narrow molecular weight distributions (weight‐average molecular weight/number‐average molecular weight < 1.2), and the molecular weight of the PNIPAM block in the diblock and triblock copolymers could be controlled by the initial molar ratio of NIPAM to dithiobenzoate‐terminated PEO and the NIPAM conversion. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4873–4881, 2004     

Preparation of a thermo- and pH-sensitive nanofibrous scaffold with embedded chitosan-based nanoparticles and its evaluation as a drug carrier

Environmentally sensitive poly(N-isopropylacrylamide) (PNIPAAm) nanofibrous scaffolds loaded with a hydrophilic drug were fabricated via an electrospinning process. First, thermally crosslinkable poly(NIPAAm-co-N-methylolacrylamide) (PNN) was synthesized by redox polymerization below the phase transition temperature of PNIPAAm. The phase transition temperature of the PNN copolymer could be altered from 34 to 40 °C by changing the ratio of N-methylolacrylamide (NMA) to NIPAAm. Subsequently, PNN/chitosan nanofibers were electrospun using ethanol/acetic acid/water as a cosolvent. The PNN/chitosan nanofibers were sensitive to both pH and temperature. The fibrous structure of the soaked PNN/chitosan nanofibers was successfully preserved by the crosslinking of NMA. Furthermore, the chitosan-based nanoparticles (NPs) were introduced into the PNN nanofibers (PNN/NPs) to achieve prolonged drug release. The nanoparticles were observed in the PNN nanofibers by transmission electron microscopy. All of the scaffolds examined had high tensile strengths (1.45 MPa or above) and exhibited no significant cytotoxicity toward human fetal skin fibroblasts. Finally, doxycycline hyclate was used as a model drug. The results illustrated that PNN/NPs nanofibrous scaffolds exhibited continuous drug release behavior for up to 1 week, depending on the pH and temperature.     

Multilayered electrospun nanofibrous scaffolds for tailored controlled release of embelin

Polymeric electrospun meshes are highly attractive as versatile platforms for numerous biomedical applications, tissue engineering, biosensors, and controlled release of bioactive agents. Herein, we describe the preparation and characterization of multilayered nanofibrous poly(ε-caprolactone) scaffolds with different embelin content by electrospinning technique. In vitro release in physiological and acidic pH and kinetic analysis were performed. The results show that it is possible to modulate the release profile depending on the number and thickness of layers added to drug-loaded scaffold that acts as an embelin reservoir. Electrospun multilayered scaffolds present characteristics, morphology and release profiles that could be very attractive for use as embelin controlled release systems.     

Cellulose Acetate–Poly(N‐isopropylacrylamide)‐Based Functional Surfaces with Temperature‐Triggered Switchable Wettability

Temperature‐triggered switchable nanofibrous membranes are successfully fabricated from a mixture of cellulose acetate (CA) and poly(N‐isopropylacrylamide) (PNIPAM) by employing a single‐step direct electrospinning process. These hybrid CA‐PNIPAM membranes demonstrate the ability to switch between two wetting states viz. superhydrophilic to highly hydrophobic states upon increasing the temperature. At room temperature (23 °C) CA‐PNIPAM nanofibrous membranes exhibit superhydrophilicity, while at elevated temperature (40 °C) the membranes demonstrate hydrophobicity with a static water contact angle greater than 130°. Furthermore, the results here demonstrate that the degree of hydrophobicity of the membranes can be controlled by adjusting the ratio of PNIPAM in the CA‐PNIPAM mixture.

     

Dual-syringe reactive electrospinning of cross-linked hyaluronic acid hydrogel nanofibers for tissue engineering applications

A facile fabrication of a cross-linked hyaluronic acid (HA) hydrogel nanofibers by a reactive electrospinning method is described. A thiolated HA derivative, 3,3'-dithiobis(propanoic dihydrazide)-modified HA (HA-DTPH), and poly(ethylene glycol) diacrylate (PEGDA) are selected as the cross-linking system. The cross-linking reaction occurs simultaneously during the electrospinning process using a dual-syringe mixing technique. Poly(ethylene oxide) (PEO) is added into the spinning solution as a viscosity modifier to facilitate the fiber formation and is selectively removed with water after the electrospinning process. The nanofibrous structure of the electrospun HA scaffold is well preserved after hydration with an average fiber diameter of 110 nm. A cell morphology study on fibronectin (FN)-adsorbed HA nanofibrous scaffolds shows that the NIH 3T3 fibroblasts migrate into the scaffold through the nanofibrous network, and demonstrate an elaborate three-dimensional dendritic morphology within the scaffold, which reflects the dimensions of the electrospun HA nanofibers. These results suggest the application of electrospun HA nanofibrous scaffolds as a potential material for wound healing and tissue regeneration. [image: see text] Laser scanning confocal microscopy demonstrates that the NIH3T3 fibroblast develops an extended 3D dendritic morphology within the fibronectin-adsorbed electrospun HA nanofibrous scaffold.     

A bioinspired 4D printed hydrogel capsule for smart controlled drug release

With the ever-increasing demands for personalized drugs, disease-specific and condition-dependent drug delivery systems, four-dimensional (4D) printing can be used as a new approach to develop drug capsules that display unique advantages of self-changing drug release behavior according to the actual physiological circumstances. Herein, a plant stomata-inspired smart hydrogel capsule was developed using an extrusion-based 4D printing method, which featured with UV cross-linked poly(N-isopropylacrylamide) (PNIPAM) hydrogel as the capsule shell. The lower critical solution temperature (LCST) of the PNIPAM hydrogels was approximately 34.9 °C and macroporous PNIPAM hydrogels were prepared with higher molecular weight polyethylene glycols (PEGs) as the pore-forming agents. Owing to the LCST-induced shrinking/swelling properties, the prepared PNIPAM hydrogel capsules exhibited temperature-responsive drug release along with the microstructure changes in the PNIPAM hydrogels. The in vitro drug release test confirmed that the PNIPAM hydrogel capsules can autonomously control their drug release behaviors on the basis of ambient temperature changes. Moreover, the increased PEG molecular weights in the macroporous PNIPAM hydrogel capsules caused an obvious improvement of drug release rate, distinctly indicating that the drug release profiles can be well programmed by adjusting the internal pore size of the hydrogel capsules. In vitro biocompatibility studies confirmed that the PNIPAM hydrogel capsules have great potential for biomedical applications. The bioinspired 4D printed hydrogel capsules pioneer the paradigm of smart controlled drug release.     

CONDUCTING BLENDS OF POLY (2-VINYL PYRIDINE) AND POLYETHYLENE OXIDE WITH HIGH MOLECULAR WEIGHT

Ionic, electronic and mixed (ionic-electronic) conductivities of blends of poly(2-vinylpyridine) (P2VP) and poly(ethylene oxide) (PEO) with high molecular weight after dopedwith LiClO_4, TCNQ or LiClO_4 and TCNQ were investigated. Effects of LiClO_4 and TCNQconcentrations on the conductivity of PEO/P2VP/LiClO_4 or TCNQ blend were studied.The ionic conductivity of PEO/P2VP/LiClO_4 blend increases with increasing PEO content.At a Li/ethylene oxide molar ratio of 0.10 and a TCNQ/2-vinyl pyridine molar ratio of 0.5,the mixed conductivity of PEO / P2VP / LiClO_4 / TCNQ is higher than the total of ionicconductivity of PEO/P2VP/LiClO_4 and electronic conductivity of PEO/P2VP/TCNQwhen the weight ratio of PEO and P2VP is 6/4 or 5/5. Scanning electron microscopy(SEM) on the broken cross-section of the PEO/P2VP/LiClO_4 blend and differential scan-ning calorimetry (DSC) results show that LiClO_4 could act as a compatibilizer in the blend.     

Degradation of electrospun SF/P(LLA-CL) blended nanofibrous scaffolds in vitro

Nanofibrous scaffolds of silk fibroin (SF) and poly(l-lactic acid-co-?-caprolactone) (P(LLA-CL)) blends fabricated via electrospinning possessed good mechanical property and biocompatibility, as demonstrated by a previous study in vitro. However, the degradation behavior of the scaffolds, which may significantly influence tissue repair and regeneration, needs further exploration. In this study, in vitro degradation of pure SF, P(LLA-CL) and SF/P(LLA-CL) blended nanofibrous scaffolds were performed in phosphate-buffered saline (PBS, pH 7.4 ± 0.1) at 37 °C for 6 months. A series of analyses and characterizations (including morphologic changes, loss weight, pH changes of PBS solutions, DSC, XRD and FTIR-ATR) were conducted to the nanofibrous scaffolds after degradation and the results showed that the pure SF nanofibrous scaffolds were not completely degradable in PBS while pure P(LLA-CL) nanofibrous scaffolds had the fastest degradation rate. Moreover, the addition of SF reduced the degradation rate of P(LLA-CL) in SF/P(LLA-CL) blended nanofibrous scaffolds. This was probably caused by the intermolecular interactions between SF and P(LLA-CL), which hindered the movement of P(LLA-CL) molecular chains.     

Controlled release of doxorubicin from electrospun MWCNTs/PLGA hybrid nanofibers

In this study, multiwalled carbon nanotubes (MWCNTs) were used to encapsulate a model anticancer drug, doxorubicin (Dox). Then, the drug-loaded MWCNTs (Dox/MWCNTs) with an optimized drug encapsulation percentage were mixed with poly(lactide-co-glycolide) (PLGA) polymer solution for subsequent electrospinning to form drug-loaded composite nanofibrous mats. The structure, morphology, and mechanical properties of the formed electrospun Dox/PLGA, MWCNTs/PLGA, and Dox/MWCNTs/PLGA composite nanofibrous mats were characterized using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy, and tensile testing. In vitro viability assay and SEM morphology observation of mouse fibroblast cells cultured onto the MWCNTs/PLGA fibrous scaffolds demonstrate that the developed MWCNTs/PLGA composite nanofibers are cytocompatible. The incorporation of Dox-loaded MWCNTs within the PLGA nanofibers is able to improve the mechanical durability and maintain the three-dimensional structure of the nanofibrous mats. More importantly, our results indicate that this double-container drug delivery system (both PLGA polymer and MWCNTs are drug carriers) is beneficial to avoid the burst release of the drug and able to release the antitumor drug Dox in a sustained manner for 42 days. The developed composite electrospun nanofibrous drug delivery system may be used as therapeutic scaffold materials for post-operative local chemotherapy.     

Fabrication,characterization, and drug release study of vitamin C–loaded alginate/polyethylene oxide nanofibers for the treatment of a skin disorder

Pigmented purpuric dermatosis (PPD) is a skin disorder mainly seen in the lower limbs. The nanofibrous web has been shown to be an appropriate alternative for the treatment of skin diseases as a drug delivery vehicle. In this study, sodium alginate (SA)/polyethylene oxide (PEO) nanofibers containing vitamin C (VC) were fabricated using both blended electrospinning and core/shell electrospinning. The resultant nanofibers were characterized using Fourier transform infrared spectroscopy and scanning electron microscopy. Enhancing the VC content resulted in increasing the nanofibers diameter. Also, the degradation rate and drug release were investigated. Drug release was evaluated using the in vitro dissolution and permeation method. The degradation rate and the drug release of the core/shell nanofibers were found to be lower than those of the blended nanofibers. The drug release of the extended nanofibers followed a different pattern, indicating that the extension of the nanofibers could be a promising way to control the drug release.     

Electrospinning of cyclodextrin functionalized chitosan/PVA nanofibers as a drug delivery system

A new type of nanofibrous structure from chitosan bearing carboxymethyl-β-cyclodextrin (CS-g-β-CD) as a novel drug delivery system was synthesized by grafting carboxymethyl-β-cyclodextrin (CM β-CD) onto chitosan (CS) in the presence of water soluble 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) as the condensing agent and N-hydroxysuccinimide (NHS). Defect free mats containing CS-g-β-CD have been fabricated using electrospinning of an aqueous solution of poly(vinyl alcohol) (PVA)/CS-g-β-CD blends. The morphology and diameter of the electrospun nanofibers were examined by scanning electron microscopy (SEM). The average fiber diameter was in the range of 130–210 nm. SEM images showed that the morphology and diameter of the nanofibers were mainly affected by weight ratio of the blend at constant applied voltage. The results revealed that increasing CS-g-β-CD content in the blends decreases the average fiber diameter. It was observed that the PVA/CS-g-β-CD nanofibrous mat provided a slower release of the entrapped drug in compare to PVA/CS nanofibrous mat.     

聚乙二醇-b-聚乳酸的合成及其电纺形成超细纤维研究

为了提高聚乳酸的亲水性,以辛酸亚锡为催化剂、聚乙二醇单甲醚(mPEG)为大分子引发剂进行丙交酯(LLA)开环聚合,合成聚乙二醇-b-聚乳酸两嵌段共聚物(PELA).以红外光谱1、H核磁共振谱、接触角测试、差热扫描量热分析等方法对PELA的结构及性能进行表征.结果表明,通过调控mPEG与LLA的投料比可以控制PELA的相对分子质量,而随着mPEG组分含量或链长增加,共聚物亲水性增强,但其Tg、Tcc、Tm有所降低.由普通电纺制备PELA超细纤维,并分别由乳液电纺和同轴电纺得到以水溶性聚氧化乙烯(PEO)为芯、PELA为壳的芯/壳结构复合超细纤维(E-PEO/PELA和C-PEO/PELA).扫描电镜和透射电镜结果表明,PELA、E-PEO/PELA和C-PEO/PELA超细纤维形貌良好.随着PELA中mPEG含量的增加,电纺PELA纤维膜的吸水率增强,而由乳液电纺和同轴电纺制备的PEO/PELA芯/壳结构超细纤维膜,亲水性均好于PELA超细纤维膜.     

Electrospun composite nanofibrous membrane as wound dressing with good adhesion

A photopolymerizationable mimic mussel protein structure monomer, dopamine methacrylamide (DMA), was synthesized. The photopolymerization of DMA was analysed by series real time near infrared spectroscopy (SRTIR). Dopamine methacrylamide/poly (ethylene oxide) (DMA/PEO) nanofibers were successfully prepared by electrospinning of aqueous DMA/PEO solution. Biocompatible nanofibrous membrane with good adhesion was produced by photocuring from the DMA/PEO nanofibers. The surface characterization and structure of the composite nanofibrous membrane were characterized by a scanning electron microscopy (SEM) and contact angle measurements. For identifying the potential crystalline of curing, a XRD method was used through comparing diffraction data. In the cell adhesion test we utilized the mouse fibroblast (L929) to exam the various use of the nanofibrous membrane as scaffolding materials for skin regeneration.     

Controlled release of dual drugs from emulsion electrospun nanofibrous mats

The purpose of this work is to develop a novel type of tissue engineering scaffold or drugs delivery carrier with the capability of encapsulation and controlled release drugs. In this study, Rhodamine B and Bovine Serum Albumin (BSA) were successfully incorporated into nanofibers by means of emulsion electrospinning. The morphology of composite nanofibers was studied by Scanning Electron Microscopy (SEM). The composite nanofibrous mats made from emulsion electrospinning were characterized by water contact angle measurement and X-ray diffraction. In vitro dual drugs release behaviors from composite nanofibrous mats were investigated. The results indicated that the incorporated drug and/or proteins in composite fibrous mats made from electrospinning could be control released by adjusting the processes of emulsions preparation.     

Surface‐treated and multilayered poly(ε‐caprolactone) nanofiber webs exhibiting enhanced hydrophilicity

To improve the hydrophilic properties of poly(ε‐caprolactone) (PCL) nano/microfiber webs for tissue engineering scaffolds, PCL webs of various structures were fabricated by electrospinning with single or double nozzles connected to an auxiliary electrode. Surface‐modified and layered PCL fiber webs were made by including water‐soluble poly(ethylene oxide) (PEO) in the PCL electrospinning solution (single‐nozzle method) or by electrospinning of alternating PCL and PEO solutions using two nozzles (double‐nozzle method), respectively. When the PEO component within the resulting webs was removed by dissolution with distilled water, the remnant PCL webs exhibited two distinct structures. Those made by the single‐nozzle method consisted of nanofibers with high surface roughness, whereas those made by the double‐nozzle method consisted of stacked layers of PCL nanofibers. Both types of structured PCL web showed improved hydrophilicity characteristics compared with those of nanofiber webs generated from a pure PCL solution using a typical electrospinning process. Cell culturing and scanning electron microscopy showed that the interactions between human dermal fibroblasts and the structured PCL scaffolds were very favorable. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2038–2045, 2007     

聚环氧乙烷与聚2-乙烯基吡啶混物的导电率及高氯酸锂的增容作用

研究了聚环氧乙烷(PEO)/聚2-乙烯基吡啶(P2VP)的共混物分别经LiCLO₄、四氰基代苯醌二甲烷(TCNQ)及两者共同掺杂后其共混物的离子、电子及混合导电率。当PEO与P2VP的重量比分别为6/4、5/5及4/6时,共混物的混合导电率大于相应的离子及电子导电率的总和,呈现协同效应。从共混物外观的研究发现LiCLO₄能作为PEO/P2VP共混体系的增容剂。     

聚左旋乳酸/聚氧化乙烯共混物的拉伸行为及结构转变

采用熔融共混方法制备了聚左旋乳酸(PLLA)和超高分子量聚氧化乙烯(PEO)共混物, 通过差示扫描量热(DSC)、 扫描电子显微镜(SEM)和二维广角X射线散射(2D-WAXS)等方法系统研究了PEO的加入对不同温度下PLLA拉伸行为及拉伸过程中微观结构变化的影响. 结果表明, PLLA/PEO共混物为非均相体系, PEO粒子均匀分布在PLLA中形成两相结构. PEO的加入能够显著降低PLLA的玻璃化转变温度(T_g), 在25～60 ℃范围内显著提高PLLA的拉伸性能. 在60 ℃拉伸时, PEO的加入提高了PLLA在拉伸过程中的结晶和形变能力. 在80 ℃拉伸时, 共混物的拉伸断裂伸长率下降, 但共混物的结晶速度仍高于纯PLLA样品.     

Microfluidic synthesis of tunable poly-(N-isopropylacrylamide) microparticles via PEG adjustment

We present a microfluidic droplet method to synthesize a series of tunable poly(N-isopropylacrylamide) (PNIPAM) microparticles by the addition of polyethylene glycols (PEGs). The PEGs are used as porogens and could be removed simply by washing step. By varying molecular weights and concentrations of the PEGs, morphologies and temperature-sensitive properties of the formed PNIPAM microparticles are flexibly tuned. It is found that PEG of lower molecular weight induces smaller micropore sizes, and results in faster response rate. The volume changes prior to and after shrinkage can also be regulated by the addition of PEGs due to tuned homogeneities of micropores. The microparticles tuned by PEG1000 with ratio of added PEGs to NIPAM of 2:1 respond the fastest (120 s), whereas with ratio of added PEGs to NIPAM of 1:1 display largest volume change (1/γ=12.12). This simplicity and controllability of tunable microparticles synthesis are appealing for various applications ranging from chemical delivery, drug release control, to optical applications.     

环氧树脂/聚氧化乙烯共混物及其与硫氰化钠络合物的结构研究(Ⅰ)

对不同分子量聚氧乙烯(PEO)以不同比例与双酚A二缩水甘油醚型环氧树脂(ER)制得的交联共混物ER/PEO,以及再与NaSCN络合后的产物用WAXD,SAXS,DSC和SEM等方法进行了研究,结果表明:随着ER含量的增加,ER/PEO共混物由晶态转为非晶态。ER/PEO属单斜晶系;与NaSCN络合后,体系结晶性变差。ER/PEO-NaSCN属三斜晶系,其长周期比相应ER/PEO交联共混物的长周期值大。EP的加入使非晶层增厚,结晶片层变薄,长周期值增加。