In vitro permeation of gold nanoparticles through rat skin and rat intestine: effect of particle size

Purpose of the present work was to study in vitro permeation of gold nanoparticles (NPs) through isolated rat skin and intestine. Another objective was to see the effect of particle size on permeation of the gold NP. Gold NP of 15 nm, 102 nm and 198 nm were synthesized and used for study. Franz diffusion cells were used to evaluate permeation of gold NP from rat skin whereas 'intestinal sac' method was used for assessing intestinal permeation. Number density of gold NP was analyzed by UV-vis spectroscopy whereas amount of gold permeated was measured by ICP mass spectrometry. The absorption and localization of gold NP through rat skin was studied by TEM. Qualitative analysis of gold inside of the rat skin was performed by energy dispersive X-ray spectroscopy (EDS). Gold NP showed negative zeta potential. UV-vis absorption spectra of 15 nm, 102 nm and 198 nm gold NP showed lambda(max) at 520 nm, 535 nm and 577 nm, respectively. SEM study revealed spherical morphology of NP. Gold NP showed size dependent permeation through rat skin and intestine. 15 nm gold NP showed higher permeation compared to 102 nm and 198 nm gold NP. Interestingly, 102 nm and 198 nm gold NP showed lag time of 3h and 6h in case of rat skin only. As the size of the gold NP increased, permeability coefficient and diffusion coefficient was found to be decreased. The permeation of gold NP through intestine was higher than that of skin. TEM study of rat skin revealed accumulation of smaller size gold NP in deeper region of skin whereas larger particles were observed mainly in epidermis and dermis. Presence of gold inside of rat skin was confirmed by EDS. Gold NP would be an interesting carrier for transdermal as well as for oral delivery. The study demonstrated initial proof of concept of percutaneous permeation of smaller size gold particles.     

Size-dependent electrocatalytic activity of gold nanoparticles on HOPG and highly boron-doped diamond surfaces

Gold nanoparticles were prepared by electrochemical deposition on highly oriented pyrolytic graphite (HOPG) and boron-doped, epitaxial 100-oriented diamond layers. Using a potentiostatic double pulse technique, the average particle size was varied in the range from 5 nm to 30 nm in the case of HOPG as a support and between < 1 nm and 15 nm on diamond surfaces, while keeping the particle density constant. The distribution of particle sizes was very narrow, with standard deviations of around 20% on HOPG and around 30% on diamond. The electrocatalytic activity towards hydrogen evolution and oxygen reduction of these carbon supported gold nanoparticles in dependence of the particle sizes was investigated using cyclic voltammetry. For oxygen reduction the current density normalized to the gold surface (specific current density) increased for decreasing particle size. In contrast, the specific current density of hydrogen evolution showed no dependence on particle size. For both reactions, no effect of the different carbon supports on electrocatalytic activity was observed.     

Size dependent catalysis with CTAB-stabilized gold nanoparticles

CTAB-stabilized gold nanoparticles were synthesized by applying the seeding-growth approach in order to gain information about the size dependence of the catalytic reduction of p-nitrophenol to p-aminophenol with sodium borohydride. Five different colloidal solutions of stabilized gold nanoparticles have been characterized by TEM, AFM, UV-Vis, SAXS, and DLS for their particle size distributions. Gold nanoparticles (mean sizes: 3.5, 10, 13, 28, 56 nm diameter) were tested for their catalytic efficiency. Kinetic data were acquired by UV-Vis spectroscopy at different temperatures between 25 and 45 °C. By studying the p-nitrophenol to p-aminophenol reaction kinetics we determined the nanoparticle size which is needed to gain the fastest conversion under ambient conditions in the liquid phase. Unexpectedly, CTAB-stabilized gold nanoparticles with a diameter of 13 nm are most efficient.     

Deposition of gold nanoparticles onto thiol-functionalized multiwalled carbon nanotubes

Gold nanoparticles were deposited on the surface of multiwalled carbon nanotubes (MWNTs) functionalized with aliphatic bifunctional thiols (1,4-butanedithiol, 1,6-hexanedithiol, 1,8-octanedithiol, and 2-aminoethanethiol) through a direct solvent-free procedure. Small gold particles, with a narrow particle size distribution around 1.7 nm, were obtained on 1,6-hexanedithiol-functionalized MWNTs. For MWNTs functionalized with the aminothiol, the average Au particle size was larger, 5.5 nm, apparently due to a coalescence phenomenon. Gatan image filter (GIF) observations show that sulfur is at the nanotube surface with a non-homogeneous distribution. A higher sulfur concentration was observed around the gold nanoparticles' location.     

A combinatorial approach to the study of particle size effects on supported electrocatalysts: oxygen reduction on gold

A novel high-throughput technique has been developed for the investigation of the influence of supported metal particle size and the support on electrocatalytic activity. Arrays with a gradation of catalyst particle sizes are fabricated in a physical vapor deposition system that also allows selection of the support material. Simultaneous electrochemical measurements at all electrodes in the array, together with determination of the actual particle size distribution on each of the electrodes by transmission electron microscopy (TEM), then allows rapid determination of the activity as a function of catalyst center size. The procedure is illustrated using data for the reduction of oxygen on gold nanoparticles supported on both substoichiometric titanium dioxide (TiO(x)()) and carbon and the conclusions are verified using voltammetry at rotating disk electrodes. Gold centers with diameters in the range 1.4-6.3 nm were investigated and it is demonstrated that, with both supports, the catalytic activity for oxygen reduction decays rapidly for particle sizes below 3.0 nm. This may be observed as a decrease in current at constant potential or an increase in the overpotential for oxygen reduction.     

Separation of gold nanoparticles with a monolithic silica capillary column in liquid chromatography

A separation system for gold nanoparticles was developed using monolithic silica capillary columns with 50 μm i.d., which were prepared via in-situ sol-gel processes. Gold nanoparticles with five different average sizes were synthesized via reduction of tetrachloroauric acid (HAuCl(4)) under different synthesis conditions, and were evaluated by UV-visible spectrophotometry, dynamic light scattering as well as transmission electron microscopy before they were separated using the developed system. The results showed that all of the gold nanoparticles had a certain size distribution, and the mean sizes obtained were 13, 17, 33, 43 and 61 nm, with σ = 2.5, 2.7, 5.2, 5.1 and 5.6 nm, respectively. Transmission electron microscopy showed that the samples with mean sizes of 13 and 17 nm were almost spherical, while larger samples were slightly non-uniform. The agglomeration of gold nanoparticles as the sample could be prevented by using a sodium dodecyl sulfate aqueous solution as the mobile phase, and gold nanoparticles were retained by adsorption on the silica surface. Separation with 8 mM sodium dodecyl sulfate as the eluent and a 1000-mm column was successful, and the separation of gold nanoparticles with 61 and 17 nm or 61 and 13 nm was demonstrated. The separation results obtained using a nonporous silica packed column as well as monolithic silica columns with or without mesopore growth were compared. It was found that separation using the mesopore-less monolithic column achieved better resolution. Through the use of a 2000-mm separation column, the mixtures of 61, 43, 17 nm and 61, 33, 13 nm could be separated.     

Rapid green synthesis of gold nanoparticles using Rosa hybrida petal extract at room temperature

This study reports a green method for the synthesis of gold nanoparticles using the aqueous extract of rose petals. The effects of gold salt concentration, extract concentration and extract quantity were investigated on nanoparticles synthesis. Gold nanoparticles were characterized with different techniques such as UV-vis spectroscopy, FT-IR spectroscopy, X-ray diffraction, energy dispersive X-ray spectroscopy, dynamic light scattering and transmission electron microscopy. Transmission electron microscopy experiments showed that these nanoparticles are formed with various shapes. FT-IR spectroscopy revealed that gold nanoparticles were functionalized with biomolecules that have primary amine group (-NH2), carbonyl group, -OH groups and other stabilizing functional groups. X-ray diffraction pattern showed high purity and face centered cubic structure of gold nanoparticles. Dynamic light scattering technique was used for particle size measurement, and it was found to be about 10nm. The rate of the reaction was high and it was completed within 5 min.     

Analytical performance of molecular beacons on surface immobilized gold nanoparticles of varying size and density

The high quenching efficiency of metal nanoparticles has facilitated its use as quenchers in molecular beacons. To optimize this system, a good understanding of the many factors that influence molecular beacon performance is required. In this study, molecular beacon performance was evaluated as a function of gold nanoparticle size and its immobilization characteristics. Gold nanoparticles of 4 nm, 15 nm and 87 nm diameter, were immobilized onto glass slides. Each size regime offered distinctive optical properties for fluorescence quenching of molecular dyes that were conjugated to oligonucleotides that were immobilized to the gold nanoparticles. Rigid double stranded DNA was used as a model to place fluorophores at different distances from the gold nanoparticles. The effect of particle size and also the immobilization density of nanoparticles was evaluated. The 4 nm and 87 nm gold nanoparticles offered the highest sensitivity in terms of the change in fluorescence intensity as a function of distance (3-fold improvement for Cy5). The optical properties of the molecular fluorophore was of significance, with Cy5 offering higher contrast ratios than Cy3 due to the red-shifted emission spectrum relative to the plasmon peak. A high density of gold nanoparticles reduced contrast ratios, indicating preference for a monolayer of immobilized nanoparticles when considering analytical performance. Molecular beacon probes were then used in place of the double stranded oligonucleotides. There was a strong dependence of molecular beacon performance on the length of a linker used for attachment to the nanoparticle surface. The optimal optical performance was obtained with 4 nm gold nanoparticles that were immobilized as monolayers of low density (5.7 × 10¹¹ particles cm⁻²) on glass surfaces. These nanoparticle surfaces offered a 2-fold improvement in analytical performance of the molecular beacons when compared to other nanoparticle sizes investigated. The principles developed in this study would assist in the design of solid phase molecular beacons using gold nanoparticles.     

Kinetically controlled seeded growth synthesis of citrate-stabilized gold nanoparticles of up to 200 nm: size focusing versus Ostwald ripening

Monodisperse citrate-stabilized gold nanoparticles with a uniform quasi-spherical shape of up to ～200 nm and a narrow size distribution were synthesized following a kinetically controlled seeded growth strategy via the reduction of HAuCl(4) by sodium citrate. The inhibition of any secondary nucleation during homogeneous growth was controlled by adjusting the reaction conditions: temperature, gold precursor to seed particle concentration, and pH. This method presents improved results regarding the traditional Frens method in several aspects: (i) it produces particles of higher monodispersity; (ii) it allows better control of the gold nanoparticle size and size distribution; and (iii) it leads to higher concentrations. Gold nanoparticles synthesized following this method can be further functionalized with a wide variety of molecules, hence this method appears to be a promising candidate for application in the fields of biomedicine, photonics, and electronics, among others.     

Binding of chloroquine-conjugated gold nanoparticles with bovine serum albumin

We have conjugated chloroquine, an anti-malarial, antiviral and anti-tumor drug, with thiol-functionalized gold nanoparticles and studied their binding interaction with bovine serum albumin (BSA) protein. Gold nanoparticles have been synthesized using sodium borohydride as reducing agent and 11-mercaptoundecanoic acid as thiol functionalizing ligand in aqueous medium. The formation of gold nanoparticles was confirmed from the characteristic surface plasmon absorption band at 522 nm and transmission electron microscopy revealed the average particle size to be ~7 nm. Chloroquine was conjugated to thiolated gold nanoparticles by using EDC/NHS chemistry and the binding was analyzed using optical density measurement and Fourier transform infrared spectroscopy. The chloroquine-conjugated gold nanoparticles (GNP-Chl) were found to interact efficiently with BSA. Thermodynamic parameters suggest that the binding is driven by both enthalpy and entropy, accompanied with only a minor alteration in protein's structure. Competitive drug binding assay revealed that the GNP-Chl bind at warfarin binding site I in subdomain IIA of BSA and was further supported by Trp212 fluorescence quenching measurements. Unraveling the nature of interactions of GNP-Chl with BSA would pave the way for the design of nanotherapeutic agents with improved functionality, enriching the field of nanomedicine.     

Synthesis and Characterization of Gold Nanoparticle‐Functionalized Ordered Mesoporous Materials

We report the synthesis and characterization of three different ordered mesoporous materials, labeled MCM‐48, SBA‐155, and SBA‐16 type materials, which were functionalized with gold nanoparticles using three different strategies. The functionalization strategies can be categorized as (i) in situ growth of gold nanoparticles, (ii) template loading, and (iii) diffusion loading of prefabricated gold nanoparticles. Two different particle sizes were employed in the latter two strategies, 5 nm and 10 nm. For all mesoporous structures, functionalization strategies, and particle sizes attempted, the materials retained their long‐range order upon incorporation of nanoparticles. From the adsorption isotherms, incorporation of gold nanoparticles altered the pore structure of the mesoporous support of some of the SBA‐15 and SBA‐16 type materials, with the effect on incorporation on the pore structure being particle size dependent in most cases. The majority of gold nanoparticles were found to reside on the external surface of the materials regardless of substrate and functionalization strategy; however, for the in situ synthesis and the template loading strategies, a significant fraction of the particles was determined to reside within the pore system of the material. In situ growth resulted in the highest content of gold nanoparticles in the solid phase. The relative effectiveness in retaining gold nanoparticles in the solid phase for each functionalization strategy was determined to be, in descending order, in situ synthesis, template loading, and diffusion loading.     

Continuous Electroformation of Gold Nanoparticles in Nanoliter Droplet Reactors

Gold nanoparticles (AuNPs) are employed in numerous applications, including optics, biosensing and catalysis. Here, we demonstrate the stabilizer-free electrochemical synthesis of AuNPs inside nanoliter-sized reactors. Droplets encapsulating a gold precursor are formed on a microfluidic device and exposed to an electrical current by guiding them through a pair of electrodes. We exploit the naturally occurring recirculation flows inside confined droplets (moving in rectangular microchannels) to prevent the aggregation of nanoparticles after nucleation. Therefore, AuNPs with sizes in the range of 30 to 100 nm were produced without the need of additional capping agents. The average particle size is defined by the precursor concentration and droplet velocity, while the charge dose given by the electric field strength has a minor effect. This method opens the way to fine-tune the electrochemical production of gold nanoparticles, and we believe it is a versatile method for the formation of other metal nanoparticles.     

Extinction coefficient of gold nanoparticles with different sizes and different capping ligands

Extinction coefficients of gold nanoparticles with core size ranging from approximately 4 to 40 nm were determined by high resolution transmission electron microscopy analysis and UV-vis absorption spectroscopic measurement. Three different types of gold nanoparticles were prepared and studied: citrate-stabilized nanoparticles in five different sizes; oleylamide-protected gold nanoparticles with a core diameter of 8 nm, and a decanethiol-protected nanoparticle with a diameter of around 4 nm. A linear relationship between the logarithms of extinction coefficients and core diameters of gold particles was found independent of the capping ligands on the particle surface and the solvents used to dissolve the nanoparticles. This linear relation may be used as a calibration curve to determine the concentration or average size of an unknown nanoparticle or nanoparticle-biomolecule conjugate sample.     

Microwave-induced synthesis of highly dispersed gold nanoparticles within the pore channels of mesoporous silica

Highly dispersed gold nanoparticles have been incorporated into the pore channels of SBA-15 mesoporous silica through a newly developed strategy assisted by microwave radiation (MR). The sizes of gold are effectively controlled attributed to the rapid and homogeneous nucleation, simultaneous propagation and termination of gold precursor by MR. Diol moieties with high dielectric and dielectric loss constants, and hence a high microwave activation, were firstly introduced to the pore channels of SBA-15 by a simple addition reaction between amino group and glycidiol and subsequently served as the reduction centers for gold nanoparticles. Extraction of the entrapped gold from the nanocomposite resulted in milligram quantities of gold nanoparticles with low dispersity. The successful assembly process of diol groups and formation of gold nanoparticles were monitored and tracked by solid-state NMR and UV-vis measurements. Characterization by small angle X-ray diffraction (XRD) and transmission electron microscopy (TEM) indicated that the incorporation of gold nanoparticles would not breakup the structural integrity and long-range periodicity of SBA-15. The gold nanoparticles had a narrow size distribution with diameters in the size range of 5-10 nm through TEM observation. The average particles size is 7.9 nm via calculation by the Scherrer formula and TEM measurements. Nitrogen adsorption and desorption isotherms gave further evidence that the employed method was efficient and gold nanoparticles were successfully incorporated into the pore channels of SBA-15.     

Colloid stability of thymine-functionalized gold nanoparticles

Gold nanoparticles surface-coated with thyminethiol derivatives containing long hydrocarbon chains have been prepared. The diameter of the particles is 2.2 and 7.0 nm, respectively, with a relatively narrow size distribution. Thyminethiol derivatives are attached to the gold particle surfaces with thymine moieties as the end groups. The colloid stability of the gold nanoparticles as a function of the type and concentration of monovalent salt, pH, and particle size was investigated in alkaline, aqueous solutions. The gold particles are stable in concentrated NaCl and KCl solutions, but are unstable in concentrated LiCl and CsCl solutions. The larger gold particles are more sensitive to salt concentration and aggregate at lower salt concentrations. The reversible aggregation and dispersion of the gold particles can be controlled by changing the solution pH. The larger gold particles can be dispersed at higher pH and aggregate faster than the smaller particles, due to stronger van der Waals forces between the larger particles. Hydration forces play an important role in stabilizing the particles under conditions where electrostatic forces are negligible. The coagulation of the gold nanoparticles is attributed to van der Waals attraction and reduced hydration repulsion in the presence of LiCl and CsCl.     

Flow field-flow fractionation: a versatile approach for size characterization of α-tocopherol-induced enlargement of gold nanoparticles

Flow field-flow fractionation (FlFFF) was used for size characterization of gold nanoparticles. The measured particle sizes obtained from FlFFF for the commercial 10 nm gold nanoparticle standard and the gold nanoparticles synthesized in the laboratory were in good agreement with those measured by transmission electron microscopy (TEM). Further, the capability of α-tocopherol to induce enlargement of gold nanoparticles by catalysis of the reduction of AuCl₄⁻ by citrate was observed by monitoring the changes in particle size of gold nanoparticles using FlFFF. The effects of α-tocopherol and incubation time on enlargement of the gold nanoparticles were examined. Higher concentrations of α-tocopherol resulted in larger nanoparticles. At fixed α-tocopherol concentration, larger nanoparticles were formed at longer incubation times.     

Influence of intense pulsed laser irradiation on optical and morphological properties of gold nanoparticle aggregates produced by surface acid-base reactions

Gold nanoparticles were surface modified with an ionizable and pH-sensitive monolayer of thiobarbituric acid (TBA). By variation of the pH value of the solution, nanoparticle aggregates can be produced in a controlled way. The aggregates thus prepared were irradiated with an intense pulsed laser at 532 nm. The products in solution were examined by transmission electron microscopy (TEM) and optical absorption spectroscopy. The TEM images of the products revealed that the nanoparticle aggregates dissociate upon laser irradiation and form much smaller gold nanoparticles. The optical absorption spectra measured simultaneously show the gradual disappearance of the absorbance band of the aggregates at around 680 nm. Additionally, a blue shift (from 534 to 524 nm) of the resonance absorbance corresponding to isolated nanoparticles has been observed. All the observations suggest that the colloidal solution becomes more stable after laser irradiation. Both the reduced nanoparticle size and the stabilizing TBA ligands present on the particle surface contribute to the acquired stability of the colloidal solutions.     

Chemiluminescence from the decomposition of peroxymonocarbonate catalyzed by gold nanoparticles

In this work, an online preparation of peroxymonocarbonate was formed innovatively, which offered the reliable intermediate for further investigation. Gold colloids with nanoparticles of different sizes were found to enhance the chemiluminescence (CL) of the peroxymonocarbonate-eosin Y system, and the most intensive CL signals were obtained with 50 +/- 1 nm diameter gold nanoparticles. UV-visible adsorption spectra, fluorescence spectra, transmission electron microscopy images, electron paramagnetic resonance spin-trapping spectra, and mass spectra were obtained in order to study the CL enhancement mechanism. Peroxymonocarbonate, a reactive oxygen species, can be decomposed to singlet oxygen which transfers its energy to eosin Y. The CL can be induced by excited eosin Y. Gold nanoparticles facilitated the radical generation and singlet oxygen molecular formation on the surface of the gold nanoparticles. Thus, the CL emission enhanced greatly by adding gold nanoparticles into the system.     

Size and surface effects on the magnetic properties of NiO nanoparticles

NiO nanoparticles (NPs) were prepared by a sol-gel process using the citrate route. The sol-gel parameters were tuned to obtain samples with different average particle sizes, ranging from 12 to 70 nm. Magnetic characterization revealed an increase in the blocking temperature with the diameter of the NPs and an increase in the effective magnetic anisotropy (K(eff)) with decreasing particle size. The magnetic moment per particle was calculated for all samples using the susceptibility value at T = 300 K. The number of uncompensated spins per NP was found to be proportional to n (n(S)≡ total number of spins), indicating that they are randomly distributed on the NP surface. For small diameters (<30 nm) the surface anisotropy constant was estimated, using, for NiO NPs, a recent model describing the evolution of K(eff) with particle size. Hysteretic loops performed at low temperatures after field cooling displayed loop shifts (～6.5 kOe in the field axis and ～0.18 emu g(-1) vertically), coercive field enhancement (H(C)≈ 4.8 kOe) and training effects for the smaller NPs. The sample with NPs of larger diameters presented magnetic properties close to those of bulk NiO.     

On the measurement of gold nanoparticle sizes by the dynamic light scattering method

The application of the dynamic light scattering (DLS) method for determining the size distribution of colloidal gold nanoparticles in a range of 1–100 nm is discussed. It is shown that rotational diffusion of nonspherical strongly scattering particles with sizes of larger than 30–40 nm results in the appearance of a false peak in a size range of about 5–10 nm. In this case, the uncritical application of the DLS method may yield particle volume or number size distributions different from those obtained by transmission electron microscopy. For weakly scattering particles with diameters of smaller that 20 nm, the DLS method demonstrates an additional peak of intensity distribution in the region of large sizes that is related to particle aggregates or byproduct particles rather than individual nanoparticles. Practical methods for solving the problem of false peaks are discussed. It is established that the width of the DLS distribution does not correspond to transmission electron microscopy data and is overestimated. The advantages and drawbacks of the methods are compared and it is noted that, at present, the DLS method is the only instrument suitable for nonperturbative and sensitive diagnostics of relatively slow aggregation processes with characteristic times on the order of 1 min. In particular, this method can be used to diagnose gold nanoparticle conjugate aggregation initiated by biospecific interactions on their surface.