茂基钌化合物的合成与结构研究:双核钌氢合物的合成与晶体结构研究

三氢钌化物[(C~5H~5)Ru(PPh~3)H~3](1)经光解反应生成了一个双核钌氢化合物[(C~5H~5)Ru.(PPh~3)(μ-H)]~2(2).用X射线重原子法及Fourier迭代解出了2的晶体结构,其分子呈二聚形式,Ru-Ru键处在对称中心,两个钌原子间还通过两个桥氢原子相联,该二聚体的单体为16电子物种,与推测的碳氢键活化反应的中间体类似,为金属有机氢化物活化碳氢键的反应历程提供了证据.文中还给出了2的可能形成过程.     

Thermochemical studies of benzoylnitrene radical anion: the N-H bond dissociation energy in benzamide in the gas phase

The thermochemical properties of benzoylnitrene radical anion, C6H5CON-, were determined by using a combination of energy-resolved collision-induced dissociation (CID) and proton affinity bracketing. Benzoylnitrene radical anion dissociates upon CID to give NCO- and phenyl radical with a dissociation enthalpy of 0.85 +/- 0.09 eV, which is used to derive an enthalpy of formation of 33 +/- 9 kJ/mol for the nitrene radical anion. Bracketing studies with the anion indicate a proton affinity of 1453 +/- 10 kJ/mol, indicating that the acidity of benzamidyl radical, C6H5CONH, is between those of benzamide and benzoic acid. Combining the measurements gives an enthalpy of formation for benzamidyl radical of 110 +/- 14 kJ/mol and a homolytic N-H bond dissociation energy in benzamide of 429 +/- 14 kJ/mol. Additional thermochemical properties obtained include the electron affinity of benzamidyl radical, the hydrogen atom affinity of benzoylnitrene radical anion, and the oxygen anion affinity of benzonitrile.     

Organophotoredox-Mediated Amide Synthesis by Coupling Alcohol and Amine through Aerobic Oxidation of Alcohol

The combination of an organic photocatalyst [4CzIPN (1,2,3,5-tetrakis(carbazol-9-yl)-4,6 dicyanobenzene) or 5MeOCzBN (2,3,4,5,6-pentakis(3,6-dimethoxy-9 H-carbazol-9-yl)benzonitrile)], quinuclidine, and tetra-n-butylammonium phosphate (hydrogen-bonding catalyst) was employed for amide bond formations. The hydrogen-bonded OH group activated the adjacent C−H bond of alcohols towards hydrogen atom transfer (HAT) by a radical species. The quinuclidinium radical cation, generated through single-electron oxidation of quinuclidine by the photocatalyst, employed to abstract a hydrogen atom from the α-C−H bond of alcohols selectively due to a polarity effect-produced α-hydroxyalkyl radical, which subsequently converted to the corresponding aldehyde under aerobic conditions. Then the coupling of the aldehyde and an amine formed a hemiaminal intermediate that upon photocatalytic oxidation produced the amide.     

硅杂四元环化合物的合成和反应

硅杂四元环化合物在有机硅化学中是一类非常重要的小分子环系化合物, 广泛应用于有机化学、金属有机化学以及材料化学. 环上只含有一个硅原子的硅杂环丁烷可以通过γ-卤代丙基硅烷的Grignard反应、Si＝C键与烯烃的 [2＋2]环加成反应以及硅杂环丙烷的扩环反应合成, 环上只含有一个硅原子的硅杂环丁烯可以通过格氏试剂或锂试剂参与的Si—C键的关环反应、硅杂环丁烷的转化反应、硅卡宾对C—H键的插入反应、Si＝C键与炔烃的[2＋2]环加成反应以及二炔基硅烷的分子内成环反应等途径合成. 硅杂环丁烷和硅杂环丁烯由于存在环张力和具有一定的Lewis酸性, 能够通过扩环反应生成五元和六元含硅杂环化合物, 也能够通过开环反应生成不同结构的有机硅分子和聚合物, 抑或实现有机反应在温和条件下的转化.     

C59Si on the monohydride Si(100):H-(2 x 1) surface

We propose the use of the Si atom in the experimentally observed C59Si molecule as a possible way to controllably anchor fullerene molecules on a Si surface, due to the formation of a strong bond to one of the Si surface atoms. All our results are based on ab initio total energy density functional theory, and we obtain that the binding energy is on the order of 2.1 eV, approximately 1.4 eV more stable than a C60 bonded in a similar situation. A possible route to obtain such adsorption via a (C59Si)2 dimer is examined, and we find the whole process to be exothermic by approximately 0.2 eV.     

Direct Observation of Atomic Dynamics and Silicon Doping at a Topological Defect in Graphene

Chemical decoration of defects is an effective way to functionalize graphene and to study mechanisms of their interaction with environment. We monitored dynamic atomic processes during the formation of a rotary Si trimer in monolayer graphene using an aberration‐corrected scanning‐transmission electron microscope. An incoming Si atom competed with and replaced a metastable C dimer next to a pair of Si substitutional atoms at a topological defect in graphene, producing a Si trimer. Other atomic events including removal of single C atoms, incorporation and relocation of a C dimer, reversible C? C bond rotation, and vibration of Si atoms occurred before the final formation of the Si trimer. Theoretical calculations indicate that it requires 2.0 eV to rotate the Si trimer. Our real‐time results provide insight with atomic precision for reaction dynamics during chemical doping at defects in graphene, which have implications for defect nanoengineering of graphene.     

Indications of field-directing and self-templating effects on the formation of organic lines on silicon

It has previously been shown that multimolecular organic nanostructures form on H-Si(100)-2×1 via a radical mediated growth process. In this mechanism, growth begins through the addition of a molecule to a silicon surface dangling bond, followed by the abstraction of a neighboring H atom and generation of a new dangling bond on the neighboring site. Nanostructures formed by this mechanism grow along one edge of a dimer row. Here, we explored the possibility of using lithographically prepared, biased metal contacts on the silicon surface to generate an electric field that orients molecules during the growth process to achieve growth in the perpendicular-to-row direction. The formation of some nanostructures in a direction that was nearly perpendicular to the dimer rows was achieved, whereas such features were not formed in the absence of the field. Analysis of the scanning tunneling microscopy images suggests that the formation of these nanostructures may involve self-templating effects in addition to dangling bond diffusion rather than a straightforward addition∕abstraction mechanism. These initial results offer some indication that a molecular pattern writer can be achieved.     

Site‐Selective Remote Radical C−H Functionalization of Unactivated C−H Bonds in Amides Using Sulfone Reagents

A general and practical strategy for remote site‐selective functionalization of unactivated aliphatic C?H bonds in various amides by radical chemistry is introduced. C?H bond functionalization is achieved by using the readily installed N‐allylsulfonyl moiety as an N‐radical precursor. The in situ generated N‐radical engages in intramolecular 1,5‐hydrogen atom transfer to generate a translocated C radical which is subsequently trapped with various sulfone reagents to afford the corresponding C?H functionalized amides. The generality of the approach is documented by the successful remote C?N₃, C?Cl, C?Br, C?SCF₃, C?SPh, and C?C bond formation. Unactivated tertiary and secondary C?H bonds, as well as activated primary C?H bonds, can be readily functionalized by this method.     

Quantum-Chemical Study of Structural and Energy Characteristics of Benzonitrile Dimers

Ab initio MP2 calculations with several basis sets proved the existence of a stable benzonitrile dimer with a planar structure and a short contact between the H atom of one molecule and the N atom of another. The structure is greatly stabilized by attraction between the neighboring oppositely directed dipoles and donor-acceptor interaction between the orbital of the lone electron pair of the N′ atom and the vacant antibonding orbital localized on the C-H bond.Original Russian Text Copyright © 2004 by O. V. Sizova, E. P. Sokolova, V. I. Baranovskii, D. A. Rozmanov, and O. A. Tomashenko__________Translated from Zhurnal Strukturnoi Khimii, Vol. 45, No. 5, pp. 807–815, September–October, 2004.     

Reactivity of Cr(III) μ-oxo compounds: catalyst regeneration and atom transfer processes

Oxidation of CpCr[(XylNCMe)(2)CH] (Xyl = 2,6-Me(2)C(6)H(3)) with pyridine N-oxide or air generated the μ-oxo dimer, {CpCr[(XylNCMe)(2)CH]}(2)(μ-O). The μ-oxo dimer was converted to paramagnetic Cr(III) CpCr[(XylNCMe)(2)CH](X) complexes (X = OH, O(2)CPh, Cl, OTs) via protonolysis reactions. The related Cr(III) alkoxide complexes (X = OCMe(3), OCMe(2)Ph) were prepared by salt metathesis and characterized by single crystal X-ray diffraction. The interconversion of the Cr(III) complexes and their reduction back to Cr(II) with Mn powder were monitored using UV-vis spectroscopy. The related CpCr[(DepNCMe)(2)CH] (Dep = 2,6-Et(2)C(6)H(3)) Cr(II) complex was studied for catalytic oxygen atom transfer reactions with PPh(3) using O(2) or air. Both Cr(II) complexes reacted with pyridine N-oxide and γ-terpinene to give the corresponding Cr(III) hydroxide complexes. When CpCr[(DepNCMe)(2)CH] was treated with pyridine N-oxide in benzene in the absence of hydrogen atom donors, a dimeric Cr(III) hydroxide product was isolated and structurally characterized, apparently resulting from intramolecular hydrogen atom abstraction of a secondary benzylic ligand C-H bond followed by intermolecular C-C bond formation. The use of very bulky hexaisopropylterphenyl ligand substituents did not preclude the formation of the analogous μ-oxo dimer, which was characterized by X-ray diffraction. Attempts to develop a chromium-catalyzed intermolecular hydrogen atom transfer process based on these reactions were unsuccessful. The protonolysis and reduction reactions of the μ-oxo dimer were used to improve the previously reported Cr-catalyzed radical cyclization of a bromoacetal.     

自由基C59N及双体(C59N)2的理论研究

用INDO系列方法对自由基C59N及双体(C59N)2进行了理论研究,结果表明: N的掺入使C60笼发生畸变, N向笼外突出, 碳氮6-6键上的C自旋密度较大, 两C59N自由基在这个碳上以C-C单键连接形成双体为C2h, C2v对称性。其中C2v构型更稳定, 且N与附近的三个碳均以单键连接。理论计算的电子光谱与实验吻合较好。(C59N)2易分解为单体C59N。     

C77Si电子结构和光谱的量子化学研究

用INDO系列方法对C77Si的21种可能异构体进行了理论研究,表明最稳定异构体是由C78(C2v)椭球长轴所穿过的六元环上原子C35被Si取代所形成的,椭球短轴附近的原子不宜被取代;C77Si光谱吸收峰与C78相比发生红移,讨论了吸收峰红移的原因.     

Density functional study of the sigma and pi bond activation at the Pd=X (X = Sn, Si, C) bonds of the (H2PC2H4PH2)Pd=XH2 complexes. Is the bond cleavage homolytic or heterolytic?

The mechanism for the activation of the sigma bonds, the O-H of H2O, C-H of CH4, and the H-H of H2, and the pi bonds, the C[triple bond]C of C2H2, C=C of C2H4, and the C=O of HCHO, at the Pd=X (X = Sn, Si, C) bonds of the model complexes (H2PC2H4PH2)Pd=XH2 5 has been theoretically investigated using a density functional method (B3LYP). The reaction is significantly affected by the electronic nature of the Pd=X bond, and the mechanism is changed depending on the atom X. The activation of the O-H bond with the lone pair electron is heterolytic at the Pd=X (X = Sn, Si) bonds, while it is homolytic at the Pd=C bond. The C-H and H-H bonds without the lone pair electron are also heterolytically activated at the Pd=X bonds independent of the atom X, where the hydrogen is extracted as a proton by the Pd atom in the case of X = Sn, Si and by the C atom in the case of X=C because the nucleophile is switched between the Pd and X atoms depending on the atom X. In contrast, the pi bond activation of C[triple bond]C and C=C at the Pd=Sn bond proceeds homolytically, and is accompanied by the rotation of the (H2PC2H4PH2)Pd group around the Pd-Sn axis to successfully complete the reaction by both the electron donation from the pi orbital to Sn p orbital and the back-donation from the Pd dpi orbital to the pi orbital. On the other hand, the activation of the C=O pi bond with the lone pair electron at the Pd=Sn bond has two reaction pathways: one is homolytic with the rotation of the (H2PC2H4PH2)Pd group and the other is heterolytic without the rotation. The role of the ligands controlling the activation mechanism, which is heterolytic or homolytic, is discussed.     

Different adsorption structures of pyridine on Si(001) and Ge(001) surfaces

The adsorption and reaction of pyridine on the Si(001) and Ge(001) surfaces are investigated by first-principles density-functional calculations within the generalized gradient approximation. On both surfaces the N atom of pyridine initially reacts with the down atom of the dimer, forming a single bond between the N atom and the down atom. On Ge(001) such an adsorption configuration is most favorable, but on Si(001) a further reaction with a neighboring dimer occurs, resulting in formation of a bridge-type configuration. Especially we find that on Ge(001) the bridge-type configuration is less stable than the gas phase. Our results provide an explanation for a subtle difference in the adsorption structures of pyridine on Si(001) and Ge(001), which was observed from recent scanning tunneling microscopy experiments.     

A crossed beam and ab initio investigation on the formation of vinyl boron monoxide (C2H3BO; X1A') via reaction of boron monoxide (11BO; X2Σ+) with ethylene (C2H4; X1A(g))

The reaction dynamics of the boron monoxide radical ((11)BO; X(2)Σ(+)) with ethylene (C(2)H(4); X(1)A(g)) were investigated at a nominal collision energy of 12.2 kJ mol(-1) employing the crossed molecular beam technique and supported by ab initio and statistical (RRKM) calculations. The reaction is governed by indirect scattering dynamics with the boron monoxide radical attacking the carbon-carbon double bond of the ethylene molecule without entrance barrier with the boron atom. This addition leads to a doublet radical intermediate (O(11)BH(2)CCH(2)), which either undergoes unimolecular decomposition through hydrogen atom emission from the C1 atom via a tight transition state located about 13 kJ mol(-1) above the separated products or isomerizes via a hydrogen shift to the O(11)BHCCH(3) radical, which also can lose a hydrogen atom from the C1 atom. Both processes lead eventually to the formation of the vinyl boron monoxide molecule (C(2)H(3)BO; X(1)A'). The overall reaction was determined to be exoergic by about 40 kJ mol(-1). The reaction dynamics are also compared to the isoelectronic ethylene (C(2)H(4); X(1)A(g)) - cyano radical (CN; X(2)Σ(+)) system studied earlier.     

C（sp3）-H bond functionalization of oximes derivatives via 1,5-hydrogen atom transfer induced by iminyl radical

Oximes derivatives have been vastly used in organic synthesis. In this review, C（sp³）-H bond functionalization of oximes derivatives via iminyl radical induced 1,5-hydrogen atom transfer was discussed. According to the different type of products, this review was divided into three parts:（1） C（sp³）-H bond functionalization for C-C bond formation.（2） C（sp³）-H bond functionalization for C-N bond formation.（3） C（sp³）-H bond functionalization for C-S, C-F b...     

Polymerization of Acetonitrile via a Hydrogen Transfer Reaction from CH3 to CN under Extreme Conditions

Acetonitrile (CH₃CN) is the simplest and one of the most stable nitriles. Reactions usually occur on the C≡N triple bond, while the C?H bond is very inert and can only be activated by a very strong base or a metal catalyst. It is demonstrated that C?H bonds can be activated by the cyano group under high pressure, but at room temperature. The hydrogen atom transfers from the CH₃ to CN along the CH???N hydrogen bond, which produces an amino group and initiates polymerization to form a dimer, 1D chain, and 2D nanoribbon with mixed sp² and sp³ bonded carbon. Finally, it transforms into a graphitic polymer by eliminating ammonia. This study shows that applying pressure can induce a distinctive reaction which is guided by the structure of the molecular crystal. It highlights the fact that very inert C?H can be activated by high pressure, even at room temperature and without a catalyst.     

Synthese von Magnesium-bis[N,N′-bis(trimethylsilyl)benzamidinat] als Bis(THF)- und Benzonitril-Addukt

Synthesis of Magnesium Bis[N,N′ -bis(trimethylsilyl)benzamidinate] as both Bis(THF) and Benzonitrile Adduct Magnesium bis[bis(trimethylsilyl)amide] 1 , reacts with benzonitrile in toluene at room temperature to yield magnesium bis[N,N′-bis(trimethylsilyl)benzamidinate]-benzonitrile(1/1) 2 . Addition of THF leads to a quantitative substitution of the benzonitrile ligand by two THF molecules. The performance of the addition reaction in THF yields magnesium bis[N,N′-bis(trimethylsilyl)benzamidinate] · THF(1/2) 3 . The upper benzonitrile complex 2 , crystallizes in the orthorhombic space group Pbcn with {a = 1383.2(2); b = 2589.1(4); c = 1133.7(1) pm; Z = 4}. The magnesium atom is coordinated distorted trigonal-bipyramidal, where the benzonitrile ligand lies within the equatorial plane. The axial bound nitrogen atom of the benzamidinate substitution shows with a value of 213 pm a slightly longer bond distance to the metal center than the one in the equatorial plane (210 pm). The steric strain within the benzamidinate ligand leads to an elongation of the silicon atoms out of the 1,3-diazaallylic moiety under an enlargement of the C? N? Si angle to 131°.     

Density functional theory study of one-dimensional growth of styrene on the hydrogen-terminated Si(001)-(3 x 1) surface

Recent experimental work has shown that the addition of styrene molecules to hydrogen-terminated Si(001) surfaces leads to the formation of one-dimensional molecular structures through a radical-initiated surface chain reaction mechanism. These nanometric structures are observed to be directed parallel to the dimer rows on the H-Si(001)-(2 x 1) surface and perpendicular to the same rows on H-Si(001)-(3 x 1). Using periodic density functional theory (DFT) calculations, we have studied the initial steps of the radical chain mechanism on the H-Si(001)-(3 x 1) surface and compared them to analogous results for H-Si(001)-(2 x 1). On the H-Si(001)-(3 x 1) surface, one of the crucial steps of the surface chain reaction, namely, the abstraction of a H atom from a nearby surface hydride unit, is found to have a somewhat smaller activation energy in the direction perpendicular to the dimer rows (H abstraction from the nearest dihydride site) than along the rows (H abstraction from a neighboring dimer). Additionally, due to the steric repulsion between the styrene molecules and the SiH2 subunits, growth along the dimer rows is not thermodynamically favorable on the (3 x 1) surface. On the other hand, due to the absence of the SiH2 subunits, growth parallel to the Si dimer rows becomes favored on the H-Si(001)-(2 x 1) surface.     

Geometry of the transition state of radical abstraction reactions involving Si-H, Ge-H, and Sn-H Bonds

Transition-state interatomic distances in the reactions C˙H₃+SiH₄, Si˙H₃+SiH₄, C˙H₃+GeH₄, and C˙H₃+SnH₄ are calculated by the B3LYP density functional and intersecting parabolas methods. A semiempirical algorithm is developed for the calculation of the Y...H and C...H distances in the transition state of the radical abstraction reactions R˙+YH involving silanes, germanes, and stannanes and the reverse reactions of silyl, germanyl, and stannyl radicals with hydrocarbons. This algorithm is used to calculate interatomic distances in these reactions. An analysis of the calculated data shows that the Y...H and C...H distances in these reactions depend on the following factors: the enthalpy of reaction, the radius of the Y atom (Y = C, Si, Ge, Sn), and four-electron repulsion during the attack of a radical on the C-H bond adjacent to the double bond. Empirical equations relating the interatomic distances to the enthalpy of reaction and to the Y-R bond length are set up.