Conjugated microporous poly(phenylene butadiynylene)s

High surface area porous poly(phenylene butadiynylene) networks were obtained (BET surface area up to 842 m(2) g(-1)) by the palladium-catalyzed homocoupling of 1,3,5-triethynylbenzene and 1,4-diethynylbenzene.     

The study of controlling pore size on electrospun carbon nanofibers for hydrogen adsorption

Polyacrylonitrile (PAN)-based carbon nanofibers (CNFs) were prepared by using electrospinning method and heat treatment to get the media for hydrogen adsorption storage. Potassium hydroxide and zinc chloride activations were conducted to increase specific surface area and pore volume of CNFs. To investigate the relation between pore structure and the capacity of hydrogen adsorption, textural properties of activated CNFs were studied with micropore size distribution, specific surface area, and total pore volume by using BET (Brunauer-Emmett-Teller) surface analyzer apparatus and the capacity of hydrogen adsorption was evaluated by PCT (pressure-composition-temperature) hydrogen adsorption analyzer apparatus with volumetric method. The surface morphology of activated CNFs was observed by SEM (scanning electron microscope) images to investigate the surface change through activation. Even though specific surface area and total pore volume were important factors for increasing the capacity of hydrogen adsorption, the pore volume which has pore width (0.6-0.7 nm) was a much more effective factor than specific surface area and pore volume in PAN-based electrospun activated CNFs.     

Influence of surface treatments on micropore structure and hydrogen adsorption behavior of nanoporous carbons

The scope of this work was to control the pore sizes of porous carbons by various surface treatments and to investigate the relation between pore structures and hydrogen adsorption capacity. The effects of various surface treatments (i.e., gas-phase ozone, anodic oxidation, fluorination, and oxygen plasma) on the micropore structures of porous carbons were investigated by N(2)/77 K isothermal adsorption. The hydrogen adsorption capacity was measured by H(2) isothermal adsorption at 77 K. In the result, the specific surface area and micropore volume of all of the treated samples were slightly decreased due to the micropore filling or pore collapsing behaviors. It was also found that in F(2)-treated carbons the center of the pore size distribution was shifted to left side, meaning that the average size of the micropores decreased. The F(2)- and plasma-treated samples showed higher hydrogen storage capacities than did the other samples, the F(2)-treated one being the best, indicating that the micropore size of the porous carbons played a key role in the hydrogen adsorption at 77 K.     

Template-free sol–gel synthesis of microporous NiO–SiO2 composite with high surface area and narrow pore size distribution

Microporous NiO–SiO₂ composites were synthesized by a new sol–gel chemistry strategy using propylene oxide as gelation agent. Simple procedure, using of cheap precursor and high quality of the synthesized target materials were recognized as the advantages of the process. The obtained maximum pore surface area of the composites is about 718 m² g^?1 with narrow pore size distribution around 9 Å and micropore volume of 0.31 cm³ g^?1. It was found that the surface area of the samples decreases with the increase of Ni/Si molar ratio. However, the micropore size distributions of the samples were not altered with the increase of Ni/Si molar ratio. The unique chemistry of this sol–gel route assures the effectivity, simplicity and low cost of the whole process, showing the characteristics for the potential large scale preparation of microporous mixed oxide composites with very high pore area and very narrow pore size distribution.     

Low-temperature adsorption of hydrogen on nanoporous aluminophosphates: effect of pore size

Several nanoporous aluminophosphates (AlPOs) have been used to analyze the effect of pore diameter on the hydrogen adsorption characteristics. The heat of adsorption and adsorption capacity per unit micropore volume increase with decreasing pore size. AlPOs with smaller micropores favorably adsorb hydrogen at relatively low pressures. This work demonstrates that small pore size and large micropore volume are beneficial for high hydrogen uptake.     

Hydrogen adsorption in transition metal carbon nano-structures

Templated microporous carbons were synthesized from metal impregnated zeolite Y templates. Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM) were employed to characterize morphology and structure of the generated carbon materials. The surface area, micro- and meso-pore volumes, as well as the pore size distribution of all the carbon materials were determined by N₂ adsorption at 77 K and correlated to their hydrogen storage capacity. All the hydrogen adsorption isotherms were Type 1 and reversible, indicating physisorption at 77 K. Most templated carbons show good hydrogen storage with the best sample Rh-C having surface area 1817 m²/g and micropore volume 1.04 cm³/g, achieving the highest as 8.8 mmol/g hydrogen storage capacity at 77 K, 1 bar. Comparison between activated carbons and synthesized templated carbons revealed that the hydrogen adsorption in the latter carbon samples occurs mainly by pore filling and smaller pores of sizes around 6 Å to 8 Å are filled initially, followed by larger micropores. Overall, hydrogen adsorption was found to be dependent on the micropore volume as well as the pore-size, larger micropore volumes showing higher hydrogen adsorption capacity.     

BET specific surface area and pore structure of MOFs determined by hydrogen adsorption at 20 K

Low-pressure high-resolution hydrogen adsorption for the metal-organic framework MIL-101 are measured at 19.5 K and pressures below 57 kPa. The BET specific surface area and micropore volume are determined and compared to results from nitrogen adsorption at 77 K. Steps in the hydrogen adsorption isotherm are correlated to the pore structure of MIL-101.     

汉麻杆基活性炭表面织构与储氢性能的研究

以天然汉麻杆为原料,采用KOH化学活化的方法改变活化时间制备出了高比表面积活性炭,并且对其表面进行硝酸氧化处理,研究活性炭表面化学状态对其吸附性能的影响。采用77 K低温氮气吸附和FTIR对样品进行了表征,并在77 K、100 kPa的条件下测定样品的氢气吸附等温线。结果表明,所有样品具有较高的比表面积(2 435.93～3 240.95 m²·g^-1)和总孔容(1.3～1.98 cm³·g^-1),且随活化时间的延长而增加,3.5 h达到最大值,之后由于骨架坍塌有所减小。所有样品的孔径分布较为一致呈多峰型分布,主要以小于2 nm的微孔为主,同时含有少量的中孔和大孔。活化3.5 h样品的吸氢量最大,达到3.28wt%。研究发现,吸氢量受比表面积和孔容等参数影响较大,77 K下不仅小于2 nm的微孔对活性炭吸氢行为贡献较大,中孔也有十分重要的影响。样品经硝酸氧化处理后,BET比表面积和总孔容均在一定程度上减小,而氢气吸附量也有所降低。     

Synthesis of zeolite-casted microporous carbons and their hydrogen storage capacity

Zeolite-casted microporous carbons (ZMiPCs) were synthesized using the replica casting method. The ZMiPC were also treated chemically by H(3)PO(4) (A-ZMiPC) or KOH (B-ZMiPC) impregnation, to investigate the effect of the acceptor-donor interaction on the hydrogen storage behaviors. The presence of functional groups of the modified ZMiPC surfaces was confirmed by X-ray photoelectron spectroscopy. The total acidity of the carbon surfaces was determined using the Boehm titration method. The microstructure was characterized by X-ray diffraction. The N(2)/77K adsorption/desorption isotherms were analyzed to characterize specific surface area, pore volume, and pore size distribution of the samples. The capacity of hydrogen adsorption was evaluated using a pressure-composition-temperature apparatus at 298K/100bar. From these results, the specific surface areas and micropore volume of ZMiPC increased more than two fold compared to the zeolite template. Meanwhile, the textural properties of A-ZMiPC and B-ZMiPC were decreased by the chemical treatments. Consequently, the largest hydrogen storage was obtained on A-ZMiPC, even though their textural properties had decreased, due to a charge induced dipole interaction between the modified carbon surface and hydrogen molecules.     

Structural and sorption properties of carbon replicas obtained by matrix carbonization of organic precursors in SBA-15 and KIT-6

We have carried out a comparative study of matrix carbonization of some organic precursors (sucrose, polydivinylbenzene, polyphenol-formaldehyde, polyacrylonitrile, acetonitrile) in SBA-15 and KIT-6 silica mesoporous molecular sieves. We have shown that carbon mesoporous molecular sieves of the CMK-8 type, obtained in KIT-6 mesopores, have better adsorption characteristics due to the features of the three-dimensional cubic structure, the larger pore volume and thickness of the walls of the framework. The maximum micropore volume is observed in CMK-3 and CMK-8, obtained by carbonization of polyphenol-formaldehyde and polydivinylbenzene, while the greatest specific surface area is observed on carbonization of sucrose, where the maximum hydrogen adsorption capacity is achieved at a level of ∼1.4 wt.% (77 K, 1 atm). We show that the mesopore surface coverage by hydrogen in carbon mesoporous molecular sieves increases as the degree of graphitization increases.     

Synthesis of linear and tripoidal oligo(phenylene ethynylene)-based building blocks for application in modular DNA-programmed assembly

Rigid linear and tripoidal organic modules based on the oligo(phenylene ethynylene) backbone having salicylaldehyde-derived termini are synthesized. A highly functionalized 5-iodosalicyl aldehyde was prepared and coupled to each ethynyl group of 1,4-diethynylbenzene or 1,3,5-triethynylbenzene in Sonogashira couplings. The two or three termini of the compounds are functionalized for incorporation in linear and branched oligonucleotide strands. For the linear module (LM), the two termini are equipped with amide spacers, and one of these was functionalized with a DMTr (dimethoxytrityl)-protected hydroxy group and the other with a phosphoramidite. One of the tripoidal modules is prepared with DMTr groups in two of its three termini. A tripoidal module is also synthesized with three different groups on its hydroxy termini: a phosphoramidite, a DMTr group, and an Fmoc group. Extended studies have shown that these rigid linear and tripoidal organic modules can be incorporated into short oligonucleotides. Several of these modules can be applied for DNA-directed assembly and covalent coupling into structures of predetermined connectivity. Such structures have potential application for molecular electronics and nanotechnology.     

Effect of 3-glycidoxypropyltrimethoxysilane precursor on the properties of ambient pressure dried silica aerogels

The effect of an organically modified precursor, 3-glycidoxypropyltrimethoxysilane in an ambient pressure process involving aging in silane solution for silica aerogels is presented. The effect of increasing trialkoxysilane/tetraalkoxysilane precursor ratio and the influence of water to Si molar ratio on the gelation and adsorption properties were investigated. An optimum water to Si molar ratio (8) gave the fastest gelation for all precursor ratios indicating a balance between the increase in rate of hydrolysis and a decrease in concentration of the monomers. Surface area analysis proved that in the dried gel, the organic groups are largely present on the pore walls and prevent the condensation of the silanol groups during drying. This in turn prevents pore collapse and further increases the total pore volume. The inclusion of the organically functionalised silane in the process further enhances the ambient pressure drying through this effect.     

Porous properties of silylated mesoporous silica and its hydrogen adsorption

Porous properties of mesoporous silica silylated with various organic silanes were examined and their hydrogen adsorption properties were measured at 77 K. By silylation of the mesoporous silica, the specific surface area, pore radius and pore volume steeply decreased depending on both the size of the silane and the amount actually incorporated into the mesoporous framework. The pores reduced in size depending on the amount of modifying silane and vanished completely in the samples silylated with 3-aminopropyltriethoxysilane and phenyltrichlorosilane. Hydrogen adsorption isotherms of the silylated samples were measured at 77 K. With the exception of the sample with phenyltrichlorosilane, hydrogen adsorption volumes were proportional to the surface area with a slope of around 1.1 molecules/nm². On the other hand, for the sample treated with phenyltrichlorosilane, a large hydrogen adsorption volume of around 38.1 molecules/nm² was obtained. On heating the silylated compounds at 500 °C, micropores formed and the hydrogen adsorption volume increased by 1.5 times or more due to the development of micropores.     

The effect of small micropores on methane adsorption of coals from Northern China

In this study, the effect of coal micropores on the adsorption properties, especially the Langmuir pressure (P _L ), was investigated by testing 11 coal samples from Northern China. The adsorption of CO₂ at 273 K was utilized to analyze the pore size distribution. The results of these coals show that micropore volume and micropore surface area are the major factors affecting the Langmuir volume (V _L ) but have weaker effects on P _L . Micropore filling theory considers that some smaller micropores with an obvious overlapping adsorption force cause volume filling adsorption. These micropores firstly reach saturated adsorption, controlling the adsorption volume at the low-pressure stage and thus have a great effect on P _L . Four times the methane molecular diameter, 1.5 nm, was assumed as the critical pore size with obvious overlapping adsorption force. The relationship between P _L and the proportion of the pore volume below 1.5 nm to the micropore volume was investigated, and it was found that the higher the volume proportion of these small micropores was, the smaller the P _L was, though two data points deviated from this trend. The reason for the anomalous coal samples could be the deviation from the assumed critical pore size of 1.5 nm for volume filling and the effects of the various micropore surface properties, which await further study. The micropore surface increases with increasing coal rank, as does V _L . The proportion of pore volume below 1.5 nm increases with coal rank, and P _L reverses. However, these relationships are discrete.     

Low-temperature adsorption/storage of hydrogen on FAU, MFI, and MOR zeolites with various Si/Al ratios: effect of electrostatic fields and pore structures

Several zeolites, such as faujasite, mordenite, and ZSM-5, with various aluminum contents have been used to analyze the effect of aluminum or cation concentration (strength of electrostatic field) on hydrogen adsorption at low temperature. Irrespective of the zeolite structure, the adsorption capacity, isosteric heat of adsorption (-DeltaHads), surface coverage, and micropore occupancy increase with increasing aluminum content of a zeolite. Zeolites with a higher amount of aluminum favorably adsorb hydrogen at relatively low pressures. For zeolites with similar aluminum contents, the adsorption capacity, isosteric heat of adsorption, surface coverage, and micropore occupancy are in the order of mordenite>ZSM-5>faujasite, probably due to differing pore sizes and the presence or absence of pore intersections. This work demonstrates that zeolites with strong electrostatic fields and narrow pores without intersections are beneficial for high hydrogen uptake.     

Effect of thermal treatment of rice husk ash on the surface properties of hydrated lime-rice husk ash binders

Rice husk ash fired at different temperatures, 450, 700 and 1000°C, was mixed with different concentrations of lime (molar lime/silica ash ratio of 0.2, 0.5 and 1.0). Each dry mixture was first ground and hydrated in the suspension form (water/solid ratio = 10) for various time intervals within the range of 1 to 365 days. The surface properties of the unhydrated and hydrated samples were studied by means of nitrogen adsorption measurements. The results indicated that the surface areas and total pore volumes of unhydrated solid mixtures and hydrated lime-rice husk ash samples, prepared with lime/silica ash ratio of 1.0, decrease with increasing firing temperature of rice husk ash. The effect of varying the lime/silica ash ratio of the solid mixture on the surface area and pore structure was fully discussed. The results of surface area and pore volume measurements could also be related to the crystal structure of silica produced from rice husk ash.     

酚醛基活性炭纤维孔结构及其电化学性能研究

利用水蒸汽活化法制备了酚醛基活性炭纤维(ACF-H2O), 对其比表面积、孔结构与在LiClO4/PC(聚碳酸丙烯酯)有机电解液中的电容性能之间的关系进行了探讨. 用N2(77 K)吸附法测定活性炭纤维的孔结构和比表面积, 用恒流充放电法和交流阻抗技术测量双电层电容器(EDLC)的电容量及内部阻抗. 研究表明, 在LiClO4/PC有机电解液中, ACF-H2O电极的可用孔径(d)应在0.7 nm以上. 随着活化时间的延长, ACF-H2O的孔容和比表面不断增大, 但微孔(0.7 nm ＜ d ＜ 2.0 nm)和中孔(d ＞ 2.0 nm)率变化很小, 活化过程中孔的延伸和拓宽同步进行, 但过度活化则造成孔壁塌陷, 孔容和比表面迅速下降. 因此, 除活化过度的样品外, 电容量随比表面积呈线性增长, 最高达到109. 6 F•g-1. 但中孔和微孔的孔表面对电容的贡献不同, 其单位面积电容分别为8.44 μF•cm-2和4.29 μF•cm-2, 中孔具有更高的表面利用率. ACF-H2O电极的电容量、阻抗特性和孔结构密切相关. 随着孔径的增大, 时间常数减小, 电解液离子更易于向孔内快速迁移, 阻抗降低, 电极具有更好的充放电倍率特性. 因此, 提高孔径和比表面积, 减少超微孔(d ＜ 0.7 nm), 是提高 EDLC能量密度和功率密度的重要途径. 然而仅采用水蒸汽活化, 只能在小中孔以下的孔径范围内进行调孔, ACF-H2O电极电容性能的提高受限.     

Adsorbents from Waste materials

The possibility of using pyrolyzed wastes produced in already working incineration plants, as adsorbents for waste water treatment, was studied. Showing very poor adsorption properties, they were improved by steam activation technique used in the conventional activated carbon manufacturing. It is concluded that various organic waste materials can be converted to carbonaceous final products with a character similar to activated carbon. Their adsorption properties and pore size distribution are determined by the structure of the starting material. Although most of these samples have a low specific surface area, their pore volume is not negligible in the meso-and micropore range. Adsorption tests with model waste waters confirmed that adsorption properties are strongly influenced by the character of the suface. The adsorption capacity of these samples can be utilized for the treatment of strongly polluted industrial waste waters. Considering that the raw material ‘needed’ to manufacture these adsorbent is produced permanently and the adsorbents do not have to be regenerated, it might be worthwhile using these kinds of adsorbents in the primary treatment of industrial waste waters.     

沥青基球状活性炭气相吸脱附行为研究

本文利用热重法研究了一系列沥青基球状活性炭对蒸汽及正已烷蒸汽的动态吸脱附曲线。结果表明,PSAC对苯蒸汽的吸附及再生性能优良。随吸附温度的降低、比表面积的增大、总孔容及微孔容的增大,PSAC对苯蒸汽的吸附容量增大。PSAC对正已烷的吸附速度大于对苯蒸汽的吸附速度,但其对正已烷的平衡吸附容量小于对苯蒸汽的平衡吸附容量。     

Adsorption of Carbon Dioxide on Activated Carbon

The adsorption of CO2 on a raw activated carbon A and three modified activated carbon samples B, C, and D at temperatures ranging from 303 to 333 K and the thermodynamics of adsorption have been investigated using a vacuum adsorption apparatus in order to obtain more information about the effect of CO2 on removal of organic sulfur-containing compounds in industrial gases. The active ingredients impregnated in the carbon samples show significant influence on the adsorption for CO2 and its volumes adsorbed on modified carbon samples B, C, and D are all larger than that on the raw carbon sample A. On the other hand, the physical parameters such as surface area, pore volume, and micropore volume of carbon samples show no influence on the adsorbed amount of CO2. The Dubinin-Radushkevich (D-R) equation was the best model for fitting the adsorption data on carbon samples A and B, while the Preundlich equation was the best fit for the adsorption on carbon samples C and D. The isosteric heats of adsorption on carbon samples A, B, C, and D derived from the adsorption isotherms using the Clapeyron equation decreased slightly increasing surface loading. The heat of adsorption lay between 10.5 and 28.4 kJ/mol, with the carbon sample D having the highest value at all surface coverages that were studied. The observed entropy change associated with the adsorption for the carbon samples A, B, and C (above the surface coverage of 7 ml/g) was lower than the theoretical value for mobile adsorption. However, it was higher than the theoretical value for mobile adsorption but lower than the theoretical value for localized adsorption for carbon sample D.