g-C3N4-BiOBr复合材料制备及可见光催化性能

利用原位沉积法将Bi OBr纳米片生长到g-C_3N_4表面,制得g-C_3N_4-Bi OBr p-n型异质结复合光催化剂。采用X射线衍射(XRD)、红外光谱(FTIR)、场发射扫描电子显微镜(FE-SEM)、透射电子显微镜(TEM)、紫外可见漫反射(UV-Vis-DRS)和荧光光谱(PL)等测试对光催化剂结构和性能进行表征。通过可见光辐照降解甲基橙水溶液检测评估复合光催化剂光催化活性。研究结果表明:复合光催化剂由Bi OBr和g-C_3N_4两相组成,Bi OBr纳米片在片状g-C_3N_4表面快速形核生长形成面-面复合结构。相比于纯相g-C_3N_4和Bi OBr,g-C_3N_4-Bi OBr复合材料具有更强可见光吸收能力,吸收带边红移。在可见光辐照100 min后,性能最佳的2:8 gC_3N_4-Bi OBr复合光催化剂光催化活性分别是纯相g-C_3N_4和Bi OBr的1.8和1.2倍,经过4次循环实验后,其降解率仍达84%,说明复合结构光催化剂催化性能和稳定性增强。复合光催化剂的荧光强度显著降低,说明光生载流子复合得到了有效抑制。复合光催化剂催化性能的提高归因于p-n型异质结促进电荷有效分离、抑制电子-空穴复合和吸收光波长范围的扩展,相比单一成分材料具有更好的催化活性和稳定性。自由基捕获实验证明,可见光降解甲基橙光催化过程中的主要活性成分为空穴,并据此提出了可能的光催化机理。     

Two-dimensional g-C3N4 nanosheets-based photo-catalysts for typical sustainable processes

Graphitic carbon nitride (g-C₃N₄) has been widely studied as a visible light responsive photocatalyst in recent years, due to its facile synthesis, low cost, high stability, and appropriate bandgap/band positions. In this review, we firstly introduce and compare various exfoliation approaches of bulk g-C₃N₄ into ultrathin g-C₃N₄ nanosheets. Then, many modification strategies of g-C₃N₄ nanosheets are also reviewed, including heterojunction construction, doping, defect control, and structure design. Thereafter, the charge transfer mechanism in g-C₃N₄ nanosheets based heterojunctions is present, e.g., Z-scheme, S-scheme and other forms. Besides, the photocatalytic applications of g-C₃N₄ nanosheets based photocatalysts are summarized including environmental remediation, energy generation and storage, organic synthesis, and disinfection. This review ends with a summary and some perspectives on the challenges and new directions in exploring g-C₃N₄ nanosheets-based photocatalysts.     

g-C3N4-BiOBr复合材料制备及可见光催化性能

利用原位沉积法将BiOBr纳米片生长到g-C₃N₄表面,制得g-C₃N₄-BiOBr p-n型异质结复合光催化剂。采用X射线衍射(XRD)、红外光谱(FTIR)、场发射扫描电子显微镜(FE-SEM)、透射电子显微镜(TEM)、紫外可见漫反射(UV-Vis-DRS)和荧光光谱(PL)等测试对光催化剂结构和性能进行表征。通过可见光辐照降解甲基橙水溶液检测评估复合光催化剂光催化活性。研究结果表明:复合光催化剂由BiOBr和g-C₃N₄两相组成,BiOBr纳米片在片状g-C₃N₄表面快速形核生长形成面-面复合结构。相比于纯相g-C₃N₄和BiOBr,g-C₃N₄-BiOBr复合材料具有更强可见光吸收能力,吸收带边红移。在可见光辐照100 min后,性能最佳的2:8 g-C₃N₄-BiOBr复合光催化剂光催化活性分别是纯相g-C₃N₄和BiOBr的1.8和1.2倍,经过4次循环实验后,其降解率仍达84%,说明复合结构光催化剂催化性能和稳定性增强。复合光催化剂的荧光强度显著降低,说明光生载流子复合得到了有效抑制。复合光催化剂催化性能的提高归因于p-n型异质结促进电荷有效分离、抑制电子-空穴复合和吸收光波长范围的扩展,相比单一成分材料具有更好的催化活性和稳定性。自由基捕获实验证明,可见光降解甲基橙光催化过程中的主要活性成分为空穴,并据此提出了可能的光催化机理。     

Facile synthesis of GO as middle carrier modified flower-like BiOBr and C3N4 nanosheets for simultaneous treatment of chromium(VI) and tetracycline

A novel GO modified g-C₃N₄ nanosheets/flower-like BiOBr hybrid photocatalyst is fabricated by a facile method. The characterization results reveal that wrinkled GO is deposited between g-C₃N₄ nanosheets and flower-like BiOBr forming a Z-scheme heterojunction. As a mediator, plicate GO plays a positive role in prompting photogenerated electrons transferring through its sizeable 2D/2D contact surface area. The g-C₃N₄/GO/BiOBr hybrid displays a superior photocatalytic ability to g-C₃N₄ and BiOBr in photodegrading tetracycline (TC), whose removal efficiency could reach 96% within 2 h. Besides, g-C₃N₄/GO/BiOBr composite can reduce Cr(VI), and simultaneously treat TC and Cr(VI) combination contaminant under the visible light. The g-C₃N₄/GO/BiOBr ternary composite also exhibits satisfactory stability and reusability after four cycling experiments. Further, a feasible mechanism related to the photocatalytic process of g-C₃N₄/GO/BiOBr is put forward. This study offers a ternary hybrid photocatalyst with eco-friendliness and hopeful application in water pollution.     

Tuning of graphitic carbon nitride (g-C3N4) for photocatalysis: A critical review

Graphitic carbon nitride (g-C₃N₄) is a remarkable semiconductor catalyst that has attracted widespread attention as a visible light photo-responsive, metal-free, low-cost photocatalytic material. Pristine g-C₃N₄ suffers fast recombination of photogenerated electron-hole pairs, low surface area, and insufficient visible light absorption, resulting in low photocatalytic efficiency. This review presents the recent progress, perspectives, and persistent challenges in the development of g-C₃N₄-based photocatalytic materials. Several approaches employed to improve the visible light absorption of the materials including metal and non-metal doping, co-doping, and heterojunction engineering have been extensively discussed. These approaches, in general, were found to decrease the material’s bandgap, increase the surface area, reduce charge carrier recombination, and promote visible light absorption, thereby enhancing the overall photocatalytic performance. The material has been widely used for different applications such as photocatalytic hydrogen production, water splitting, CO₂ conversion, and water purification. The work has also identified various limitations and weaknesses associated with the material that hinders its maximum utilization under visible illumination and presented state-of-the-art solutions that have been reported recently. The summary presented in this review would add an invaluable contribution to photocatalysis research and facilitate the development of efficient visible light-responsive semiconducting materials.     

Ag/Ag3PO4/g-C3N4三元复合光催化剂的制备及其可见光驱动下的光催化活性增强

报道了一种新型Ag/Ag₃PO₄/g-C₃N₄三元复合光催化剂的制备及其半导体界面处的快速载流子分离所引起的光催化活性的显著增强效应。通过X射线衍射,扫描电子显微镜,紫外-可见吸收光谱以及光致发光光谱等就其晶体结构、形貌、组分、光学吸收以及载流子的快速分离行为进行了表征与分析。以罗丹明B作为模型化合物分子,研究发现,所制备的Ag/Ag₃PO₄/g-C₃N₄三元复合光催化剂在可见光照射下表现出比Ag₃PO₄以及Ag₃PO₄/g-C₃N₄二元催化剂更为优异的光催化活性。研究认为,Ag₃PO₄表面尺寸约为40 nm的Ag纳米粒子在可见光下受激所产生的等离子表面共振效应以及Ag₃PO₄与g-C₃N₄界面处所形成的类似异质结结构对所制备的Ag/Ag₃PO₄/g-C₃N₄三元复合光催化剂光催化活性的显著增强起到重要作用。     

Synthesis of eco-friendly porous g-C3N4/SiO2/SnO2 composite with excellent visible-light responsive photocatalysis

Forming eco-friendly heterojunction photocatalysts is excellent method to accelerate the separation rate of photogenerated charge carriers, which is attracting more and more attention. In this study, a novel and stable disordered porous g-C₃N₄/SiO₂/SnO₂ (DOP-CSiSn) heterojunction composites was fabricated by a sol-gel hard template method, and the optimal g-C₃N₄ doped ratio was adjusted in DOP-CSiSn. The DOP-CSiSn photocatalyst had the much larger specific surface area and disordered porous structure, which exhibited strong photocatalytic effect to degrade Rhodamine B (RhB), Methylene blue (MB) and Methyl orange (MO) under visible light. When the g-C₃N₄ doping content was 30 wt%, the highest photocatalytic activities were obtained, and the degradation rate of MB and MO were 99.73% and 95.58% after 50 min, respectively. Degradation rate of RhB was 95.10% after 90 min. Photocatalytic degradation rate of organic pollutants were still more than 90% after six time consecutive cycles, the composite had wonderful stability and potential value in environmental purification.     

Constructing a coplanar heterojunction through enhanced π-π conjugation in g-C3N4 for efficient solar-driven water splitting

Adjusting the electronic structure of graphitic carbon nitride（g-C₃N₄） photocatalyst through π-π conjugation is an effective method to achieve efficient photogenerated carrier separation. One key challenge ofπ-π conjugation control is to tune the degree of such conjugation without destroying the g-C₃N₄structure. Herein we report a conceptual design that achieves a coplanar heterojunction by enhancing theπ-π conjugation via the doping of crystalline g-C...     

g-C3N4/SnS2 Heterostructure: a Promising Water Splitting Photocatalyst

Graphite-like carbon nitride (g-C₃N₄) based heterostrutures has attracted intensive attention due to their prominent photocatalytic performance. Here, we explore the g-C₃N₄/SnS₂ coupling effect on the electronic structures and optical absorption of the proposed g-C₃N₄/SnS₂ heterostructure through performing extensive hybrid functional calculations. The obtained geometric structure, band structures, band edge positions and optical absorptions clearly reveal that the g-C₃N₄ monolayer weakly couples to SnS₂ sheet, and forms a typical van der Waals heterojunction. The g-C₃N₄/SnS₂ heterostructure can effectively harvest visible light, and its valence band maximum and conduction band minimum locate in energetically favorable positions for both water oxidation and reduction reactions. Remarkably, the charge transfer from the g-C₃N₄ monolayer to SnS₂ sheet leads to the built-in interface polarized electric field, which is desirable for the photogenerated carrier separation. The built-in interface polarized electric field as well as the nice band edge alignment implys that the g-C₃N₄/SnS₂ heterostructure is a promising g-C₃N₄ based water splitting photocatalyst with good performance.     

Dual cocatalysts decorated three dimensionally ordered mesoporous g-C3N4 with homogeneous wall thickness for enhanced photocatalytic performance

Making several components be more intimate interfacial contacts in the photocatalyst is an efficient strategy to improve the separation and transfer of photogenerated charge carries and enhance the photocatalytic performance in the visible light region. In this work, a promising photocatalyst was fabricated by loading of Au nanoparticles and Cd_(0.58)Zn_(0.42)S nanoparticles onto the three dimensionally ordered mesoporous g-C₃N₄ material (Au/3DOM CN/Cd_(0.58)Zn_(0.42)S) via two-step synthesis method to significantly intensify the transfer capability of charge. The results of characterization demonstrate that Au/3DOM CN/Cd_(0.58)Zn_(0.42)S photocatalyst possesses the intimate interfacial contacts of three components and homogeneous wall thickness of 3DOM g-C₃N₄ framework, and these properties give Au/3DOM CN/Cd_(0.58)Zn_(0.42)S photocatalyst an ability that it can harvest a wider range of visible light and endow it superior photocatalytic activities for hydrogen evolution from water splitting and RhB degradation. Finally, a possible mechanism was proposed based on the photoelectrochemical measurement. This work would provide a new strategy to design and fabricate g-C₃N₄-based with 3DOM architecture materials with superior photocatalytic activity.     

One-step fabrication and high photocatalytic activity of porous graphitic carbon nitride/graphene oxide hybrid by direct polymerization of cyanamide without templates

Graphene oxide modified porous g-C₃N₄ (porous g-C₃N₄/GO) had been synthesized by means of one-step calcination of cyanamide for efficient photocatalysis under visible light irradiation (λ > 400 nm). We expect that the photocatalytic activity of this hybrid photocatalyst could be enhanced by the efficient visible light absorption due to the porous structure and efficient photo generated charge separation at the heterojunction formed between porous g-C₃N₄ and GO. Scanning electron microscopy (SEM) images demonstrated that the as prepared photocatalyst is composed of GO and porous g-C₃N₄. The UV-vis diffuse reflectance spectrum shows that optical absorption of porous g-C₃N₄/GO is more intensive than for pristine g-C₃N₄. The enhanced generation of photocurrent under visible light irradiation (λ > 400 nm) is observed for the porous g-C₃N₄/GO. The results of photocatalytic experiments reveal that the pseudofirst-order kinetic constant of photocatalytic degradation of methylene blue (MB) using the porous g-C₃N₄/GO is 6 times higher than that of pristine g-C₃N₄.     

Novel synthesis of Z-scheme α-Bi2O3/g-C3N4 composite photocatalyst and its enhanced visible light photocatalytic performance: Influence of calcination temperature

In this study, α-Bi₂O₃/g-C₃N₄ nanocomposite with direct Z-scheme was successfully prepared through calcination of BiOCOOH/g-C₃N₄ precursor at different temperature. Meanwhile, the effect of calcination temperature on the physicochemical properties of α-Bi₂O₃/g-C₃N₄ was studied. All results confirmed that calcination temperature greatly influences structural, morphology, surface states, photoelectrochemical property and photocatalytic (PC) performance of α-Bi₂O₃/g-C₃N₄ composite. Furthermore, the α-Bi₂O₃/g-C₃N₄ composite was applied as photocatalyst to degrade amido black 10B dye under visible light irradiation. It was found that the composite synthesized at 400 °C exhibited the highest PC performance due to the intense visible light absorbance and high separation efficiency of electron and hole pairs. Besides, the possible PC mechanism was proposed that the photo-generated charge carrier migration in α-Bi₂O₃/g-C₃N₄ photocatalyst followed a Z-scheme structure. Finally, the stability test also manifest that the α-Bi₂O₃/g-C₃N₄ composite photocatalyst has good stability and reusability, which was a promising candidate for wastewater treatment.     

Interfacial engineering of graphitic carbon nitride (g-C3N4)-based metal sulfide heterojunction photocatalysts for energy conversion: A review

As one of the most appealing and attractive technologies, photocatalysis is widely used as a promising method to circumvent the environmental and energy problems. Due to its chemical stability and unique physicochemical, graphitic carbon nitride (g-C₃N₄) has become research hotspots in the community. However, g-C₃N₄ photocatalyst still suffers from many problems, resulting in unsatisfactory photocatalytic activity such as low specific surface area, high charge recombination and insufficient visible light utilization. Since 2009, g-C₃N₄-based heterostructures have attracted the attention of scientists worldwide for their greatly enhanced photocatalytic performance. Overall, this review summarizes the recent advances of g-C₃N₄-based nanocomposites modified with transition metal sulfide (TMS), including (1) preparation of pristine g-C₃N₄, (2) modification strategies of g-C₃N₄, (3) design principles of TMS-modified g-C₃N₄ heterostructured photocatalysts, and (4) applications in energy conversion. What is more, the characteristics and transfer mechanisms of each classification of the metal sulfide heterojunction system will be critically reviewed, spanning from the following categories: (1) Type I heterojunction, (2) Type II heterojunction, (3) p-n heterojunction, (4) Schottky junction and (5) Z-scheme heterojunction. Apart from that, the application of g-C₃N₄-based heterostructured photocatalysts in H₂ evolution, CO₂ reduction, N₂ fixation and pollutant degradation will also be systematically presented. Last but not least, this review will conclude with invigorating perspectives, limitations and prospects for further advancing g-C₃N₄-based heterostructured photocatalysts toward practical benefits for a sustainable future.     

碳纳米管改性g-C3N4提升可见光催化降解性能

以尿素为原料,引入少量的多壁碳纳米管(CNT)改性,采用简便方法制备CNT/g-C_3N_4催化剂。利用扫描电镜(SEM)、透射电镜(TEM)、傅里叶红外光谱仪(FT-IR)、X射线衍射(XRD)、X射线光电子能谱(XPS)、紫外-可见-近红外分光光度计(UV-Vis-NIR Spectrophotometer)、荧光光谱(PL)等手段对CNT/g-C_3N_4催化剂进行表征。结果表明,g-C_3N_4与CNT之间的协同作用,影响了gC_3N_4的能带结构,增强了其对可见光的吸收,改善了光生载流子的分布,提高了电子-空穴对的分离效率。并以罗丹明B(RhB)水溶液模拟废水,在可见光下考察催化剂的光催化降解性能,发现当CNT掺杂量为0.1%(w/w)时效果最佳,降解速率常数是体相g-C_3N_4的3.1倍,且研究发现超氧自由基是该体系下的主要活性物种。     

In Situ Synthesis of Cu3P/P-Doped g-C3N4 Tight 2D/2D Heterojunction Boosting Photocatalytic H2 Evolution†

Heterojunction design in a two-dimensional (2D) fashion has been deemed beneficial for improving the photocatalytic activity of g-C₃N₄ because of the promoted interfacial charge transfer, yet still facing challenges. Herein, we construct a novel 2D/2D Cu₃P nanosheet/P-doped g-C₃N₄ (PCN) nanosheet heterojunction photocatalyst (PCN/Cu₃P) through a simple in-situ phosphorization treatment of 2D/2D CuS/g-C₃N₄ composite for photocatalytic H₂ evolution. We demonstrate that the 2D lamellar structure of both CuS and g-C₃N₄ could be well reserved in the phosphorization process, while CuS and g-C₃N₄ in-situ transformed into Cu₃P and PCN, respectively, leading to the formation of PCN/Cu₃P tight 2D/2D heterojunction. Owing to the large contact area provided by intimate face-to-face 2D/2D structure, the PCN/Cu₃P photocatalyst exhibits significantly enhanced charge separation efficiency, thus achieving a boosted visible-light-driven photocatalytic behavior. The highest rate for H₂ evolution reaches 5.12 μmol·h^–1, nearly 24 times and 368 times higher than that of pristine PCN and g-C₃N₄, respectively. This work represents an excellent example in elaborately constructing g-C₃N₄-based 2D/2D heterostructure and could be extended to other photocatalyst/co-catalyst system.      

凹凸棒土/g-C3N4-Pt/聚苯胺复合材料的制备及其可见光催化性能

石墨氮化碳(g-C₃N₄)是一种窄带隙的n型半导体材料,具有可见光降解有机污染物能力;凹凸棒土(ATP)具有很强的表面活性和吸附能力,可作为催化剂的载体。我们以g-C₃N₄和ATP杂化材料(ATP/g-C₃N₄)为基础,通过简单的化学还原法将纳米Pt颗粒沉积到ATP/g-C₃N₄表面,随后利用纳米金属Pt颗粒催化苯胺无电聚合,促使聚苯胺(PANI)在ATP/g-C₃N₄表面或孔道中原位生成,获得ATP/g-C₃N₄-Pt/PANI复合材料。以阴离子染料甲基橙(MO)为模型体系,考察了复合材料的可见光催化性能。研究表明,共轭结构的PANI和g-C₃N₄在复合材料中保持完好,说明其具有良好的兼容性。由于多组分材料之间的协同效应,使得ATP/g-C₃N₄     

一锅法制备Co3O4/g-C3N4复合光催化剂及其光催化性能

以三聚氰胺和六水合氯化钴为原料,一锅法制备Co_3O_4负载的多孔石墨相氮化碳(Co_3O_4/g-C_3N_4)复合光催化材料。采用X射线衍射(XRD)、傅里叶变换红外(FT-IR)光谱、X射线光电子能谱(XPS)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、紫外-可见漫反射光谱(UV-Vis DRS)、光致发光光谱(PL)等手段对其结构和光学特性进行表征。以盐酸四环素(TC)为目标污染物,评价了不同负载量Co_3O_4/g-C_3N_4复合光催化剂的可见光催化性能。结果表明,所制备的Co_3O_4/g-C_3N_4复合光催化剂为多孔结构,其比表面积较大,并在可见光区域具有显著的吸收。利用原位生成的Co_3O_4纳米粒子在氮化碳表面形成异质结构,可有效转移光生载流子,降低光生电子-空穴的再结合率,从而提高光催化活性。并且存在最佳Co_3O_4复合量,当六水合氯化钴加入量为三聚氰胺的8%(w/w)时,所制备的复合光催化剂CoCN-8具有最佳的光催化性能。在可见光的照射下,60 min内可降解85%的TC,而同样条件下,纯g-C_3N_4仅降解23%的TC。     

Bi2Fe4O9/g-C3N4/UiO-66三元复合材料的协同光催化作用

通过水热法合成具有协同机制的三元复合材料Bi₂Fe₄O₉/g-C₃N₄/UiO-66,研究表明三元复合光催化剂的催化活性要高于二元材料和纯材料。这主要是由于Bi₂Fe₄O₉更易于和g-C₃N₄结合形成稳定的Z-scheme异质结结构,使三元复合材料增强了可见光响应能力,提高了电子-空穴分离能力,增强了空穴和电子的氧化还原能力。     

Bi2Fe4O9/g-C3N4/UiO-66三元复合材料的协同光催化作用

通过水热法合成具有协同机制的三元复合材料Bi₂Fe₄O₉/g-C₃N₄/UiO-66,研究表明三元复合光催化剂的催化活性要高于二元材料和纯材料。这主要是由于Bi₂Fe₄O₉更易于和g-C₃N₄结合形成稳定的Z-scheme异质结结构,使三元复合材料增强了可见光响应能力,提高了电子-空穴分离能力,增强了空穴和电子的氧化还原能力。     

Synergistic improvement of Cr(VI) reduction and RhB degradation using RP/g-C3N4 photocatalyst under visible light irradiation

The RP/g-C₃N₄ heterojunction photocatalyst was fabricated by a facile heat treatment strategy. The obtained composite has excellent light harvesting ability and charge separation performance. Compared to single RP and g-C₃N₄, the 50%-RP/g-C₃N₄ exhibited enhanced photocatalytic activity for simultaneously removing Cr(VI) and RhB, and the removal rates can reach 92% and 99% in 25 min, respectively. The enhanced mechanism was revealed by active species capturing experiments, showing that electrons can reduce Cr(VI) and produce O₂^– in air and that holes can directly oxidize the dyes. The coexistence of Cr(VI) and RhB will lead to a synergistic improvement of Cr(VI) reduction and RhB degradation due to rapid surface reactions. This further improves the charge separation except for the heterojunction effect. In addition, the COD analysis demonstrates that organic dyes are mainly degraded into CO₂, H₂O and some intermediates.