Unexpected intermediate 1-phenyl-2-(4-pyridyl)ethanol isolated from benz-aldehyde and 4-picoline condensation reaction

The unexpected intermediate 1-phenyl-2-(4-pyridyl)ethanol or 4-[2-(1-hydroxy-1-phenyl)ethyl]pyridine was isolated from the condensation reaction of 4-methylpyridine with benzaldehyde to form the model compound 4-styrylpyridine in the absence of a condensing agent. Spectroscopic data (NMR, IR and UV-VIS) gave evidence that the isolated compound is actually the alcohol just before the dehydration which yields the double bond of the 4-styrylpyridine and the structure was confirmed by single-crystal x-ray analysis. The isolation method from the reaction mixture was difficult at first, but now a 10% yield has been obtained, not only in powder form but as crystals good enough for R-X structural analysis.     

1-( p -Fluorophenyl)-2-(2′-pyridyl)ethanol and 1-( p -fluorophenyl)-2-(2′-pyridyl)ethene obtained from the condensation reaction of 2-picoline and p -fluorophenylaldehyde under catalyst-and solvent-free conditions

The novel intermediate 1-(p-fluorophenyl)-2-(2′-pyridyl)ethanol or 2-[2′-(1-hydroxy-1-(p-fluorophenyl)ethyl]pyridine and the corresponding novel dehydration compound 1-(p-fluorophenyl)-2-(2′-pyridyl)ethene or 2-[p-fluorophenylvinyl]pyridine were obtained from the condensation reaction of p-fluorophenylaldehyde and 2-picoline under catalyst-and solvent-free conditions. The intermediate 1-(p-fluorophenyl)-2-(2′-pyridyl)ethanol was obtained at 42 h reaction time and temperature of 120°C, respectively. ¹H-NMR, IR spectroscopic data of the 1-(p-fluorophenyl)-2-(2-pyridyl)ethanol clearly showed the presence of the-CH₂-CHOH-group. The compound was obtained as a white powder with m.p. 121–122°C and a yield of 8%. For 1-(p-fluorophenyl)-2-(2-pyridyl)ethene, the reaction conditions were similar, but the reaction temperature was increased to yield the double bond in the 1-(p-fluorophenyl)-2-(2′-pyridyl)ethene. At the reaction temperature of 140°C, the compound was a slightly brown powder with a m.p. of 78°C and yield of 18%. ¹H-NMR, IR spectroscopic data for the 1-(p-fluorophenyl)-2-(2′-pyridyl)ethene showed the presence of a double bond in trans configuration (-CH=CH-), characteristic of a styrylpyridine.     

3-Amino-5-phenyl-1-(2-pyridyl)pyrrolidines. Synthesis and stereochemistry

Stereoselective syntheses of trans- and cis-3-amino-5-phenyl-1-(2-pyridyl)pyrrolidine ( 21 and 24 ) are reported. Evidence for the relative stereochemistries of 21 and 24 was obtained by preparation of the bicyclic lactams exo- and endo-7-phenyl-1,4-diazabicyclo[3.2.1.]octan-3-one ( 16 and 19 ) from precursors of 21 and 24 .     

Structure and properties of 1-(2-pyridyl)-3-phenyl-5-arylformazans

A series of 1-(2-pyridyl)-3-phenyl-5-arylformazans, which form deeply colored complexes with Zn²⁺, Cu²⁺, Co²⁺, and Ni²⁺ salts, were obtained by coupling of arenediazonium salts, containing various substituants in the phenyl ring, with benzaldehyde 2-pyridylhydrazone. The presence of a nitro group causes deepening of the color and leads to the appearance of negative solvatochromism.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1379–1381, October, 1972.     

Synthesis and thermal reaction of 2-perfluoropropyl or (2-pyridyl)-5-phenyl-6-[4-(4-ethynylphenoxy) phenyl] -as-triazine

4-(4-Ethynylphenoxy) benzil was separately reacted with two amidrazones to provide acetylene-containing phenyl-as-triazine products. Each product consisted of two isomers which were separated by high pressure liquid chromatography and analyzed by mass spectroscopy. Differential scanning calorimetry was employed to study the thermal reaction of the acetylene-containing phenyl-as-triazine products. The principal component from the thermally induced reaction of the acetylene-containing phenyl-as-triazine was identified by mass spectroscopy as a dimer.     

Synthesis of 1,2-dihydroxyindolizidines from 1-(2-pyridyl)-2-propen-1-ol

1-(2-Pyridyl)-2-propen-1-ol, obtained by vinylation of commercially available picolinaldehyde, resulted a good starting material for the synthesis of the indolizidine skeleton. In particular, a simple process involving bromination, reduction, and nucleophilic substitution (via elimination and addition) allowed an easy conversion of the starting material into (±)-lentiginosine in ~27% overall yield.     

2-(5-甲基-2-苯基-噁唑基)乙醇的合成

2-(5-甲基-2-苯基-噁唑基)乙醇的合成;Dakin-West反应;还原     

Synthesis and properties of 2-(2-pyridyl)-1-azaazulene

The title azaazulene 3 was synthesized either by reaction of tropone with N-{(2-pyridyl)acetyl}pyridinium iodide in the presence of ammonium acetate or by palladium-catalyzed cross-coupling between 2-halo-1-azaazulene and 2-substituted pyridine. The compound shows relatively stronger basicity compared with 2,2′-bipyridyl. While 3 showed no emission from the S₁ state but from the S₂ state like azulene does, the protonated species of 3 exhibited emission from the S₁ state. Cationic metal-dependent absorption and emission relating to complexation were also studied.     

Synthesis and dehydration reaction of 1-(4-benzyloxyphenyl)-6-methoxy-2-phenyl-1,2,3,4-tetrahydronaphth-2-ol: possible intermediate of Lasofoxifene

The paper deals with a simple and sufficient synthesis of key precursor of Lasofoxifene. The 1-(4-benzyloxyphenyl)-6-methoxy-2-phenyl-3,4-dihydronaphthalene was prepared by a sequence of five reactions steps: first 1-(4-benzyloxyphenyl)-6-methoxy-3,4-dihydronaphthalene was prepared (70%), and this was quantitatively epoxidized to 7b-[4-(benzyloxy)phenyl]-5-methoxy-1a,2,3,7b-tetrahydronaphtho[1,2-b]oxirene. Catalytic (ZnI₂) isomerization of the epoxide gave 1-(4-benzyloxyphenyl)-6-methoxy-1,2,3,4-tetrahydronaphthalen-2-one (75%). Its subsequent reaction with phenylmagnesium bromide gave 1-(4-benzyloxyphenyl)-6-methoxy-2-phenyl-1,2,3,4-tetrahydro-2-naphthol (87%). Acid-catalysed dehydration of this alcohol by polyphosphoric acid (25°C) provides 1-(4-benzyloxyphenyl)-6-methoxy-2-phenyl-1,4-dihydronaphthalene (80%). Dehydration in the system of acetic anhydride/polyphosphoric acid gives 1-(4-benzyloxyphenyl)-6-methoxy-2-phenyl-3,4-dihydronaphthalene (66%).     

新型1-吡啶基-3,5-二甲基-1-氢吡唑类化合物的合成及晶体结构

以卤代吡啶为起始原料与水合肼反应合成肼基吡啶衍生物中间体,该中间体进一步与2,4-戊二酮关环合成了一类新型1-吡啶基-3,5-二甲基吡唑衍生物。对合成目标化合物进行了质谱、核磁表征。并且采用X射线单晶衍射分析方法进一步测定了目标化合物1-(3,5,6-三氯吡啶-2-基)-3,5-二甲基-1氢吡唑(3f)的晶体结构。     

Synthesis and molecular structure of 1-(2-pyridyloxy)silatrane

1-(2-Pyridyloxy)silatrane was synthesized by trans-etherification of 1-ethoxysilatrane with 2-hydroxypyridine as well as by the reaction of the latter with tetraethoxysilane and triethanolamine. Its structure was established by the XRD analysis of a single crystal, and in solution using the methods of ¹H, ¹³C, ²⁹Si NMR and IR spectroscopy.     

Synthesis and structure of hydrazones obtained from hydrazides of [5-(4-pyridyl)-1,3,4-oxadiazol-2-ylthio]acetic or 2-[5-(4-pyridyl)-1,3,4-oxadiazol-2-ylthio]propionic acids

It has been shown by¹H NMR spectroscopy that hydrazones obtained by the condensation of hydrazides of [5-4-pyridyl)-1,3,4-oxadiazol-2-ylthio] acetic or 2-[5-(2-pyridyl)-1,3,4-oxadiazol-2-ylthio]propionic acids with aldehydes, ketones, and -dicarbonyl compounds exist in DMSO solution as a mixture of stereoisomeric forms.Institute of Chemistry, Vilnius LT-2600, Lithuania. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 7, pp. 966–971, July, 2000.     

相转移催化合成4-{2-[N-甲基-N-(2-吡啶基)]氨基乙氧基}苯甲醛

以2-氯吡啶(1)、2-甲氨基乙醇(2)和4-氟苯甲醛(4)为主要原料,经2步反应合成了4-{2-[N-甲基-N-(2-吡啶基)氨基乙氧基]}苯甲醛(5).第1步反应n(2)∶n(1)=4∶1,反应温度160℃,反应时间约6h,采用减压蒸馏进行后处理,2-[N-甲基-N-(2-吡啶基)氨基]乙醇(3)的收率在93％以上,过量2的回收率在97％以上,回收的2可以重复使用.第2步反应用氢氧化钠做碱性试剂,用甲苯和水分别做为两相的溶剂,在相转移催化剂CTAB作用下进行,经优化后5的收率可达90％以上.2步反应总收率达83％以上.     

Coordination compounds of ambidentate 1-(H)alkyl-2-(2-pyridyl)benzimidazoles. Synthesis and crystal structure

Mono- and binuclear complexes of 2-(2-pyridyl)benzimidazole and its 1-alkyl-substituted derivatives with zinc dichloride were synthesized and structurally characterized. In terms of the competitive coordination problem, it was shown that pyridylbenzimidazole is an N,N-chelating ligand. The binuclear complex is formed through a dichloride bridge.     

Synthesis and properties of 1-methyl-2-phenyl-5-(2-furyl)- and 1-methyl-2-phenyl-5-(2-thienyl)imidazoles

2-Phenyl-5-(2-furyl)- and 2-phenyl-5-(2-thienyl)imidazoles were synthesized by condensation of 2-furoylmethyl and 2-thenoylmethyl acetates with benzaldehyde under the conditions of Weidenhagen reaction. The products were converted to N-methyl derivatives in the KOH-acetone system. The electrophilic substitution reactions of the products (acylation, bromination, nitration, sulfonation, hydroxymethylation) were studied.     

Synthesis and structure of the complex of 2-(2-pyridyl)-2-oxazoline with PdCl2

The reaction ofN-2-nitroxyethylpicolinamide with PdCl₂ afforded the new complexcis-[2-(2-pyridyl)-2-oxazoline-N,N′]dichloropalladium(u). The structure of this complex was established by X-ray diffraction analysis. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 561–563, March, 2000.     

Synthesis and IR spectra of 5-phenyl-2-(1-phenyl-2-trichloroacetylethenyl)pyrrole

5-Phenyl-2-(1-phenyl-2-trichloroacetylethenyl)pyrrole was synthesized by the reaction of 2-phenylpyrrole with 1-phenyl-2-trichloroacetylacetylene on silicon oxide. The structure of an intramolecular proton-transfer H-complex was assigned to the title compound based on analysis of its IR spectra in solutions in the temperature range of 165–298 K. Published inIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 11, pp. 1945–1947, November, 2000.     

1-(2-氯-4-吡啶基)-3-苯基脲的合成

氯氨基吡啶;氯吡啶基苯基脲;1-(2-氯-4-吡啶基)-3-苯基脲的合成     

Synthesis of 2-phenyl-1,3-di(4-pyridyl)naphthvalene by photoinduced reversible valence isomerization of 2-phenyl-1,3-di(4-pyridyl)naphthalene

2-Phenyl-1,3-di(4-pyridyl)naphthvalene 3a was synthesized by the photoinduced reversible valence isomerization of 2-phenyl-1,3-di(4-pyridyl)naphthalene 2a. Then, 3a was converted into 3-phenyl-1,2-di(4-pyridyl)naphthalene 4a and 2a simultaneously. The t_1/2 of 3a in DMSO-d₆ at 90 °C was 2 h, while that at 110 °C was approximately 10 min.