Visible-light-induced degradation of rhodamine B by nanosized Bi2WO6

Visible-light-induced photodegradation of rhodamine B over nanosized Bi2WO6 has been observed. Bi2WO6 exhibited a high photoactivity to photodegrade rhodamine B in the central pH solution under visible irradiation (lambda > 420 nm). After five recycles for the photodegradation of rhodamine B, the catalyst did not exhibit any significant loss of activity, confirming the photocatalyst is essentially stable. The total organic carbon measurement displayed that a high degree of mineralization was achieved in the present photochemical system. The results of density functional theory calculation illuminated that the visible-light absorption band in the Bi2WO6 catalyst is attributed to the band transition from the hybrid orbitals of Bi6s and O2p to the W5d orbitals. The Bi2WO6-assisted photocatalytic degradation of rhodamine occurs via two competitive processes: a photocatalytic process and a photosensitized process. The transformation of rhodamine is mainly via the photocatalytic process. Kinetic studies by using electron spin resonance and the radical scavenger technologies suggest that *OH is not the dominant photooxidant. Direct hole transfers and O2*- could take part in Bi2WO6 photocatalysis. This study provided a possible treatment approach for organic pollutants by using visible light in aqueous ecosystems.     

TiO_2/Bi_2WO_6纳米异质结的制备及其可见光光催化性能

采用共沉淀法制备了不同Ti/Bi摩尔比的TiO_2/Bi_2WO_6纳米异质结可见光光催化剂.采用XRD、HR-TEM、XPS及UV-vis DRS测试技术对样品的晶相结构、微观形貌、组成及吸光性能等进行了表征分析.以MB模拟环境污染物,考察了TiO_2/Bi_2WO_6纳米异质结的可见光光催化活性.结果表明,当热处理温度为700℃,n(Ti)∶n(Bi)的比值为1∶5.4,可见光照射180 min时,TiO_2/Bi_2WO_6纳米异质结对MB的降解率达80.0%,是纯Bi_2WO_6的12倍.光催化活性的提高可归因于TiO_2与Bi_2WO_6复合后可以产生能带交叠效应,从而促进光生电子-空穴对的有效分离.     

Z-机制磷酸银/钨酸铋复合物的构建及其可见光催化降解有机污染物(英文)

环境危害不仅对人类健康构成巨大威胁,而且也阻碍了经济社会的快速发展.光催化剂通过利用太阳能来降解污染物为环境问题提供一条理想的途径.光催化剂的制备应该考虑以下几点:(1)对可见光响应;(2)高量子效率和稳定性;(3)安全、廉价、无毒的原材料.早期的一些催化剂如二氧化钛、氧化锌、硫化锌、锗酸锌和磷酸铋等在紫外线照射下表现出优秀的光催化活性.但是紫外光是稀有的,而且对人体健康有害.近年来,对宽带隙半导体的改性如掺杂、贵金属沉积、构建异质结或固溶体催化剂取得了有效进展.遗憾的是,受限于材料的固有属性,有限的改进仍然不能满足实际应用的需求.因此,探索高效稳定的可见光驱动的光催化剂依然是十分有意义的.磷酸银在可见光下表现出超强的光催化降解有机污染物和产氧的能力,但是磷酸银容易受到光腐蚀,光催化活性和稳定性很难维持.另外,磷酸银导带上的电子电势较正,这将导致其很难在光催化过程中被利用.而磷酸银导带上电子的积累会抑制其内部电子空穴对的分离,从而对磷酸银的光催化活性和稳定性造成不利影响.本文选择钨酸铋纳米片与磷酸银复合去抑制电子空穴对的复合和进一步提高磷酸银的活性和稳定性.样品的粉末X射线衍射、能谱和X光电子能谱的分析证实了磷酸银/钨酸铋复合物已经被成功合成.稳态荧光光谱证实了磷酸银/钨酸铋复合物的构建可以作为一种有效抑制电子和空穴对复合的手段.通过对样品进行光催化降解次甲基蓝的实验,我们发现磷酸银/钨酸铋复合材料展现出比磷酸银和钨酸铋更强的光催化活性.其中,磷酸银/钨酸铋光催化降解次甲基蓝的速率为0.61385 min~(-1),这是磷酸银(0.47179 min~(-1))和钨酸铋(0.10270 min~(-1))活性的1.3和6.0倍.同时,磷酸银/钨酸铋表现出耐久的稳定性,在连续五次光降解过程中几乎没有明显的活性损失.进一步通过对磷酸银/钨酸铋复合材料进行光催化活性成分的捕获实验,我们发现空穴、超氧负离子自由基和羟基自由基都发挥了一定的作用.最后,我们讨论了光催化机制,Z-机制光催化机制被认为是合理的.     

Pd nanoparticle-modified Bi2WO6 nanoplates used for visible-light-driven photocatalyst

Pd nanoparticles supported on Bi₂WO₆ nanoplates used for visible-light-driven photocatalyst were successfully synthesized by photoreduction deposition method under visible-light irradiation. Different analytical techniques including X-ray diffraction, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy and photoluminescence spectroscopy revealed that face-centered cubic metallic Pd nanoparticles were uniformly loaded on top of orthorhombic Bi₂WO₆ nanoplates to form heterostructure Pd/Bi₂WO₆ nanocomposites. Photocatalytic activities of pure Bi₂WO₆ sample and heterostructure Pd/Bi₂WO₆ nanocomposites were studied through the photodegradation of rhodamine B (RhB) under visible-light irradiation. The photocatalytic efficiency of Bi₂WO₆ was increased to the highest by being loaded with 5 wt% Pd and then decreased by being loaded with 10 wt% Pd. The improved photocatalytic efficiency caused by high-efficiency diffusion and separation of photo-generated charge carriers was explained and can lead to superior photodegradation of RhB under visible-light irradiation.

     

Growth mechanism and photocatalytic properties of flower-like Bi2WO6 powders synthesized by a microwave hydrothermal method

Pure orthorhombic phase Bi₂WO₆ powders were synthesized by a microwave hydrothermal method in the absence of surfactants and templates, using Bi(NO₃)₃·5H₂O and Na₂WO₄·2H₂O as raw materials. Photocatalytic properties of the samples prepared at different reaction temperatures were also studied with Rhodamine B (RhB) solution as the target catabolite under visible light. The results indicate that flower-like Bi₂WO₆ powders can be obtained by controlling the microwave reaction temperatures in the absence of any additives. The growth of flower-like Bi₂WO₆ powders is a multistage layer assembly process, in which the flower-like Bi₂WO₆ self-assembling with the uniform size about 2 μm is synthesized at 180 °C. At the same time, the photocatalytic reaction rate constant (k) gets up to 0.04167/min and the degradation rate of RhB solution is more than 96 % after being irradiated under visible light for 70 min.     

Novel hydrostable Z-scheme Ag/CsPbBr3/Bi2WO6 photocatalyst for effective degradation of Rhodamine B in aqueous solution

In this study, a hydrostable Z-scheme Ag/CsPbBr₃/Bi₂WO₆ photocatalyst was designed and fabricated for the degradation of Rhodamine B (RhB). The structural instability of CsPbX₃ perovskites in water is one of the main obstacles that restrict their practical application in photocatalytic wastewater treatment. The photocatalyst was prepared in three steps: passivation of CsPbBr₃ nanocrystals (NCs) with 3-mercaptopropionic acid (MPA), construction of a heterojunction between MPA-passivated CsPbBr₃ NCs and Bi₂WO₆ ultrathin nanosheets, and doping Ag nanoparticles as charge mediators in the heterojunction. The as-obtained 5%Ag/20%CsPbBr₃/Bi₂WO₆ exhibits good stability and excellent photocatalytic activity. The degradation rate is 93.9% in 120 min, which is 4.41 times than that of Bi₂WO₆.     

Microwave-assisted hydrothermal synthesis of BiOCl/Bi2WO6 nanocomposites for the enhancement of photocatalytic efficiency

Research on Chemical Intermediates - In this research, BiOCl/Bi2WO6 nanocomposites were successfully synthesized by a microwave-assisted hydrothermal method. Phase, morphology and optical...     

Visible-light-driven photocatalysis of heterostructure Ag/Bi<Subscript>2</Subscript>WO<Subscript>6</Subscript> nanocomposites and their photocatalytic degradation of dye under visible light irradiation

Ag/Bi₂WO₆ nanocomposites were successfully synthesized by a combination of hydrothermal method and ultrasonic vibration. The phases, vibration modes, constituents and morphologies were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, field emission scanning electron microscopy, transmission electron microscopy and X-ray photoelectron spectroscopy. The visible-light-driven photocatalytic activitiy of 0–10 wt% Ag/Bi₂WO₆ samples was studied by determining the photodegradation of rhodamine B under xenon lamp. In this research, 10 wt% Ag/Bi₂WO₆ nanocomposites exhibit the highest efficiency and have the promising photocatalytic properties for waste water treatment.     

A templated method to Bi2WO6 hollow microspheres and their conversion to double-shell Bi2O3/Bi2WO6 hollow microspheres with improved photocatalytic performance

Bi(2)WO(6) hollow microspheres with dimension of ca. 1.5 μm were synthesized via a hydrothermal method using polystyrene particles as the template. The as-prepared Bi(2)WO(6) hollow microspheres can be further transformed to double-shell Bi(2)O(3)/Bi(2)WO(6) hollow microspheres. The samples were fully characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy (TEM), high-resolution TEM, N(2)-sorption Brunauer-Emmett-Teller surface area, UV-vis diffuse-reflectance spectroscopy, and X-ray photoelectron spectroscopy. The as-formed double-shell Bi(2)O(3)/Bi(2)WO(6) hollow microspheres exhibit enhanced photocatalytic activity due to the hollow nature and formation of the p-n junction between p-type Bi(2)O(3) and n-type Bi(2)WO(6). The study provides a general and effective method in the fabrication of composition and dimension-tunable composite hollow microspheres with sound heterojunctions that may show a variety of applications.     

A three-way synergy of triple-modified Bi2WO6/Ag/N-TiO2 nanojunction film for enhanced photogenerated charges utilization

We demonstrate a general strategy to prepare Bi(2)WO(6)/Ag/N-TiO(2) film with double visible-light-active components bridged by Ag nanoparticles as an electron shuttle, which exhibits enhanced photocatalytic activity and photoelectrochemical performance under visible light.     

Co3O4-Bi2O3 heterojunction: An effective photocatalyst for photodegradation of rhodamine B dye

Recently, the research on the remediation of aqueous organic pollutants over visible-light-active photocatalysts has got much attention. Therefore, this study reports the fabrication of visible-light-active Co₃O₄-Bi₂O₃ heterojunction photocatalyst for the photodegradation of rhodamine B dye. The Co₃O₄-Bi₂O₃ heterojunction was synthesized by the coprecipitation method and characterized by XRD, EDS, SEM, TEM, TGA, and FTIR. The as-prepared Co₃O₄-Bi₂O₃ heterojunction was utilized as a photocatalyst for the abatement of rhodamine B dye. It was observed that Co₃O₄-Bi₂O₃ showed the best catalytic performance with ～92% degradation of rhodamine B dye than Co₃O₄ and Bi₂O₃ with 14 and 34% removal of rhodamine B dye, respectively. The rate constant for Co₃O₄-Bi₂O₃ catalyzed photodegradation of rhodamine B was 6 times and 3 times higher than the rate constant for Co₃O₄ catalyzed and Bi₂O₃ catalyzed photodegradation of rhodamine B, respectively. The as-prepared Co₃O₄-Bi₂O₃ exhibited the highest catalytic performance at pH 8.     

Photogenic MnO2/Ag metal nanocomposites and their dye adsorbing activities

• Manganese dioxide/silver (MnO₂/Ag) nanoparticles were fabricated by using KMnO₄-NaBH₄ redox reaction at room temperature. The optical and structural properties of MnO₂/Ag were determined using UV–visible and Fourier transform infrared spectroscopies. The morphology was established with scanning and transmission electron microcopies, and X-ray diffraction. MnO₂/Ag showed excellent adsorbing activity to the removal of Congo red. The various kinetic models were used to determine the rate of dye removal. Congo red adsorption onto MnO₂Ag proceeds through the pseudo-second-order kinetic model. Langmuir adsorption capacity (Q⁰_max = 97.1 mg/g), and sorption intensity (n = 1.6) were estimated with Langmuir and Freundlich adsorption isotherm models for 250 mg/L Congo red. Elovich model suggest the adsorption of Congo red with the MnO₂Ag proceeds through the film diffusion. The positive values of enthalpy changes (ΔH⁰), entropy changes (ΔS⁰), and negative Gibbs free energy changes (ΔG⁰) showed that the Congo red adsorption process was endothermic, spontaneous, and chemisorption process followed with physical mechanism. The results showed that the removal efficiency decreases from 98% to 89% after the six consecutive experiments.

     

鳞状BiOBr/Bi2WO6的合成及其吸附性能

采用一步水热法成功制备鳞状形貌的BiOBr/Bi₂WO₆复合物,通过X射线衍射（XRD）仪、扫描电子显微镜（SEM）、N2吸附/解吸附比表面测定仪（BET）、傅里叶变换红外（FT-IR）光谱等对复合物进行了表征。对比Bi₂WO₆与BiOBr的SEM照片,结合KBr的浓度实验,提出了BiOBr/Bi₂WO₆的鳞状形貌的形成机理。选取有机染料为吸附质,BiOBr/Bi₂WO₆为吸附剂进行了复合物吸附性能测试。结果表明,BiOBr/Bi₂WO₆对阳离子染料表现出优越的吸附性能,10 min对次甲基蓝（MB）的吸附率高达99%,优于常规的活性炭吸附剂。此外,BiOBr/Bi₂WO₆对有机染料的吸附行为符合准二级反应速率方程和Freundlich等温吸附模型。     

A facile green approach to the synthesis of Bi2WO6@V2O5 heterostructure and their photocatalytic activity evaluation under visible light irradiation for RhB dye removal

Bismuth tungsten oxide and vanadium pentoxide (Bi₂WO₆/V₂O₅) heterostructures are produced by a green synthesis approach using Azadirachta indica extract for photocatalytic performance. The hydrothermal method at temperatures between 120 °C and 140 °C is used to synthesize Bi₂WO₆. Bi₂WO₆ and V₂O₅ phases are formed in pure orthorhombic wells according to the XRD pattern. The SEM displays V₂O₅ nanorods, Bi₂WO₆ hierarchical microspheres that resemble flowers at 120 °C, and particles with a particle-like character at 140 °C. In V₂O₅, the asymmetric stretching vibrations of the triplely coordinated oxygen (chain oxygen) bonds and the vibration of the doubly coordinated oxygen (bridge oxygen) bonds are responsible for a peak at 611 cm^?1. In FTIR spectra between 600 and 1600 cm^?1, the major absorption bands in Bi₂WO₆ are attributed to the W-O stretching, Bi-O stretching, and W-O-W bridging stretching modes. Bi₂WO₆@V₂O₅ at 120 °C has the lowest bandgap energy (2.32 eV) and optical electronegativity (0.62), as well as the highest refractive index (2.57), extinction coefficient (2.21), and dielectric constant (ε_r = 0.72 and ε_i = 11.4) among all samples, making it a suitable material for photocatalysis. Rhodamine blue (RhB) dye degradation is used to measure the photocatalytic activity (PCA) of certain materials. The results showed that heterostructure V₂O₅@Bi₂WO₆ synthesized at 120 °C is more attractive among all samples due to high degradation of RhB dye under sunlight irradiation in 90 min.     

Green synthesis and characterization of Ag and Ag/Fe3O4 nanocomposites for antimicrobial effect and rhodamine- B dye degradation

We used a simple two-stage tactic to design and synthesize a magnetically separable catalyst (MSC) Ag/Fe₃O₄ by combining independently synthesized Fe₃O₄ and Jatropha curcas root functionalized Ag nanoparticles (NPs) at room temperature. The phase composition of Ag/Fe₃O₄ NCs was revealed by morphological and structural assessment. The derived Ag/Fe₃O₄ nanocomposites demonstrated outstanding antimicrobial activity against Gram-negative Pseudomonas aeruginosa comparing to Gram-positive Bacillus subtilis which was determined by the agar well diffusion method. This is due to positively charged surface of metal oxide NPs that may bind to cell membrane. Interestingly, Ag–Fe₃O₄ NCs demonstrated good photocatalytic activity for organic dye degradation. According to a kinetic study, Ag/Fe₃O₄ MSC removed 99% of Rhodamine B at a rate constant of 1.89 min^?1. The photoelectron could perhaps ultimately collide only with dissolved solids in the substrate to form superoxides, which can damage the dye. Notably, the MSCs reusability was tested using magnetic detachment without sacrificing photocatalytic efficiency. This finding represents a significant breakthrough in the domain of wastewater treatment and biomedicine.     

Enhanced photoelectrochemical performance of Bi2S3/Ag2S/ZnO novel ternary heterostructure nanorods

The current work investigates the morphology, crystallinity and photoelectrochemical (PEC) performance of bismuth sulfide/silver sulfide/zinc oxide nanorods (Bi₂S₃/Ag₂S/ZnO NRAs) photoelectrodes as prepared at different annealing temperature. ZnO NRAs was initially grown hydrothermally, deposited in sequence with Ag₂S and Bi₂S₃ via successive ionic layer adsorption and reaction (SILAR) method before undergoing the annealing treatment. The optimised photoelectrode (Bi₂S₃/Ag₂S/ZnO NRAs-400 °C) possesses an optical bandgap of 1.60 eV extending the absorption edge of ZnO to visible light spectrum. The current-voltage characterization of Bi₂S₃/Ag₂S/ZnO NRAs photoelectrodes revealed that the photocurrent density and photoconversion efficiency were strongly dependent on the annealing temperature. The PEC study shows that the photoelectrode annealed at 400 °C achieved impressive photocurrent density of 12.95 mA/cm² at +0.5 V (vs Ag/AgCl/saturated KCl) under 100 mW/cm² illumination with superior photoconversion efficiency of 12.63%. This improvement is due to the cascade-designed band structure alignment of Bi₂S₃/Ag₂S/ZnO/ITO and to the brilliant role of Ag₂S as an intermediate layer that reduced random chance of electron-hole (e⁻_-h⁺) pairs recombination and improved the electrons collection efficiency. This work is highly anticipated to give contribution on further utilisation of Bi₂S₃/Ag₂S/ZnO NRAs as a promising semiconductor material in PEC related applications.     

Apatite-coated Ag/AgBr/Bi2WO6 nanocomposite: synthesis,characterization, and application as an efficient visible-light-driven photocatalyst

Research on Chemical Intermediates - A deposition method was applied to synthesize a multicomponent photocatalyst based on apatite (HaP)-coated Ag/AgBr/Bi2WO6 (denoted as HaP/Ag/AgBr/Bi2WO6)....     

One-step hydrothermal synthesis of hierarchical Ag/Bi2WO6 composites: In situ growth monitoring and photocatalytic activity studies

Hierarchical Ag/Bi₂WO₆ nanomaterials were prepared by a facile one-step hydrothermal method in mixed acetic acid and ethylene glycol (EG) medium. EG is employed as mild reducing agent for the formation of metallic Ag from Ag⁺ precursors. In situ energy dispersive X-ray diffraction (EDXRD) monitoring showed that the hydrothermal formation kinetics of Bi₂WO₆ in the presence of EG was significantly slowed down due to its very high viscosity. The photocatalytic activities of Ag/Bi₂WO₆ composites were evaluated by the photodegradation of methylene blue (MB) under visible light irradiation. The photocatalytic activity of Bi₂WO₆ is strongly influenced by the Ag loading. The enhanced catalytic activity of the composites is based on the cooperative effects of plasmon absorption band and separation of photogenerated electron-hole pairs.     

Preparation of highly uniform Ag/TiO2 and Au/TiO2 supported nanoparticle catalysts by photodeposition

Photodeposition of Ag nanoparticles on commercial TiO2 particles and nanoparticles was performed in order to provide direct visualization of the spatial distribution of photoactive sites on sub-micrometer-scale and nanoscale TiO2 particle surfaces and to create materials for potential catalytic applications. HRTEM (high-resolution transmission electron microscopy) and HAADF-STEM (high-angle annular dark-field scanning transmission electron microscopy) were used to characterize these materials. The size and spatial distributions of the Ag nanoparticles on the commercial TiO2 were not uniform; the concentration of Ag was higher on grain boundaries and at the edges of these submicrometer particles. In the case of TiO2 nanoparticles, the size distribution of the Ag nanoparticles deposited was relatively uniform and independent of irradiation time and photon energy. The amount of Ag deposited on TiO2 nanoparticles was at least 6 times higher than that on the commercial samples for comparable irradiation conditions. Compared to the case of Ag photodeposition, the difference in the amount of Au photodeposited on TiO2 particles and nanoparticles was even greater, especially at low precursor concentrations. Photodeposition on TiO2 nanoparticles is suggested as a potential method for the preparation of Au/TiO2 catalysts, as loadings in excess of 10 wt % of uniform 1 nm metal particles were achieved in this work.     

Synthesis of bulk g-C3N4/Bi2WO6 nanocomposite for effective photocatalytic reaction and for antimicrobial activity by hydrothermal method

Research on Chemical Intermediates - Bi2WO6 was modified by adding metallic-free polymer graphitic carbon nitrite-g-C3N4 for efficient photocatalytic performance and also for antimicrobial...