可聚合型光引发剂4-丙烯酰氧基二苯甲酮的光聚合性能研究

以实时红外光谱(RT-IR)法研究了合成的4-丙烯酰氧基二苯甲酮(4-ABP)的光聚合动力学性质,考察了不同单体、不同引发剂和助引发剂浓度、不同光强对聚合性能的影响.以萃取法对比研究了4-ABP和二苯甲酮(BP)在固化膜中的的残留量.结果表明,4-ABP是一种非常有效的光引发剂.随着引发剂浓度和光强的增大,单体转化率、最大反应速率都增大,诱导期缩短.萃取实验表明4-ABP在固化膜中的残留量远低于BP.     

Stabilization of low density polyethylene with sterically hindered derivatives of 4-hydroxybenzoic acid

In comparison with other commercial light stabilizers, sterically hindered 4-hydroxybenzoates are found to possess only a weak power, if they are used for low density polyethylene (LDPE). It is known that these benzoates exhibit significant synergistic effects together with 2-hydroxybenzophenones and hindered amine light stabilizers in light stabilization of high-density and linear low-density polyethylene. The light stabilizing efficiencies of the above mentioned stabilizers and mixtures of them in different weight ratios are determined by weathering in a Xenotest 150 unit. Only small synergistic effects of about 15 −30% are found for light stabilizing LDPE. The effects can be explained by the stabilizing efficiency of sterically hindered 4-hydroxybenzoates during processing. Combining of light stabilizing structure components like 2-hydroxy-benzophenone resp. 2, 2, 6, 6-tetramethylpiperidine with sterically hindered 4-hydroxybenzoates in one stabilizer molecule only, from the first mentioned combination, results a powerful light stabilizer. Its efficiency is the sum of the powers of the single structure components.     

Manganese carbonyls bearing tripodal polypyridine ligands as photoactive carbon monoxide-releasing molecules

The recently discovered cytoprotective action of CO has raised interest in exogenous CO-releasing materials (CORMs) such as metal carbonyls (CO complexes of transition metals). To achieve control on CO delivery with metal carbonyls, we synthesized and characterized three Mn(I) carbonyls, namely, [Mn(tpa)(CO)(3)]ClO(4) [1, where tpa = tris(2-pyridyl)amine], [Mn(dpa)(CO)(3)]Br [2, where dpa = N,N-bis(2-pyridylmethyl)amine], and [Mn(pqa)(CO)(3)]ClO(4) [3, where pqa = (2-pyridylmethyl)(2-quinolylmethyl)amine], by crystallography and various spectroscopic techniques. All three carbonyls are sensitive to light and release CO when illuminated with low-power UV (5-10 mW) and visible (λ > 350 nm, ~100 mW) light. The sensitivity of 1-3 to light has been assessed with respect to the number of pyridine groups in their ligand frames. When a pyridine ring is replaced with quinoline, extended conjugation in the ligand frame increases the absorptivity and makes the resulting carbonyl 3 more sensitive to visible light. These photosensitive CORMs (photoCORMs) have been employed to deliver CO to myoglobin under the control of light. The superior stability of 3 in aqueous media makes it a photoCORM suitable for inducing vasorelaxation in mouse aortic muscle rings.     

Conformation and Aggregation Behavior of Polyelectrolyte with Primary Amino Pendant Groups in Water or THF/Water Binary Solvent Mixture and Their Effect on the Morphology of AOT Vesicles in Aqueous Media

Cationic polyelectrolyte with primary amine pendant groups, poly (4-vinyl benzyl amine hydrochloride salt) (poly (4-VBAHS)), was characterized by static light scattering. Using light scattering measurement, the conformation transition of poly (4-VBAHS) chains in pure water, and THF/H₂O (v/v: 1/3) binary solvent mixture was discussed. Concentration-dependent multiple morphologies including interpenetrating networks, tubular micelles, branched micelles, hexagonal phases, vesicles, and needle crystals were observed by TEM. In addition, effect of poly (4-VBAHS) on the morphology, stability, and critical vesicle/micelle concentration of anionic surfactant sodium bis (2-ethylhexyl) sulfosucciante vesicles were detected using dynamic light scattering, zeta potential, surface tension, and transmission measurements.     

一种受阻胺封端的聚芴蓝光材料的合成及其稳定性研究

以五甲基哌啶醇、对溴苯酰氯为原料合成了一种受阻胺抗氧稳定剂,通过Suzuki反应将其封端到聚(9,9-二辛基)芴上.通过核磁共振谱、凝胶渗透色谱对合成材料的分子结构进行了表征;并利用荧光发射光谱和退火方法,对其光谱热稳定性进行了细致研究.实验结果表明,当在聚芴分子链上引入受阻胺五甲基哌啶醇后,其荧光发射光谱的稳定性显著提高,绿光区发射现象明显减弱.     

Photophysical properties of borondipyrromethene analogues in solution

The photophysical properties of seven new 8-(p-substituted)phenyl analogues of 4,4-difluoro-3,5-dimethyl-8-(aryl)-4-bora-3a,4a-diaza-s-indacene (derivatives of the well-known fluorophore BODIPY) in several solvents have been studied by means of absorption and steady-state and time-resolved fluorimetry. For each compound, the fluorescence quantum yield and lifetime are lower in solvents with higher polarity owing to an increase in the rate of nonradiative deactivation. Increasing the electron withdrawing strength of the p-substituent on the phenyl group in position 8 also leads to lower fluorescence quantum yields and lifetimes. When the p-substituent on the phenyl group in position 8 is a tertiary amine [8-(4-piperidinophenyl), 8-(4-N,N-dimethylaminophenyl), and 8-(4-morpholinophenyl)], the low quantum yields of these compounds in more polar solvents can be rationalized by the inversion of the energy levels of an apolar, highly fluorescent and a polar, nonfluorescent excited state, where charge transfer from the tertiary amine to the BODIPY unit occurs. These amine analogues can be protonated at low pH in aqueous solution. Fluorescence titrations yielded pK(a) values of their conjugate ammonium salts which are in agreement with the electron donating tendency of the amine group: piperidino (4.15) > dimethylamino (2.37) > morpholino (1.47), with the pK(a) values in parentheses. The rate constant of radiative deactivation (k(f)) is the same for all compounds in all solvents studied (k(f) = 1.4 x 10(8) s(-1)).     

Study on the application of the narrow distribution and controlled molecular weight hindered amine lighter stabilizers in poly(butylene succinate)

A series of hindered amine light stabilizer (HALS) with controlled molecular weight and narrow distribution was synthesized by reversible addition-fragmentation chain transfer(RAFT) polymerization, and its application in poly (butylene succinate) (PBS) was studied through accelerated aging experiments. The effects of different molecular weight light stabilizers on the degradation of PBS were studied. The aging degree and mechanism of PBS were characterized by attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), differential scanning calorimetry (DSC), scanning electron microscope (SEM) and mechanical properties testing. The extraction experiment was also carried out to study the migration of light stabilizers in PBS. Finally, the biodegradability test was conducted to study the effect of light stabilizers on biodegradation capability. The results showed that the hindered amine light stabilizer with high molecular weight can protect the PBS material to a great extent and reduce the photodegradation degree compared with the one with low molecular weight.     

Spectrophotometric determination of aliphatic primary and secondary amines by reaction with p-benzoquinone

A simple, sensitive and selective spectrophotometric method has been developed for determination of aliphatic primary and secondary amines. It is based on a reaction with excess of p-benzoquinone in ethanol whereby 1:1 (amine:quinone) coloured products are obtained, which have maximum absorption at 510 nm and E(1cm)(1%) in the range 400-650. The effect of solvent, temperature, concentration of quinone and the presence of water have been kinetically investigated by the initial rate method. The conditions for monitoring amine concentrations as low as 0.1 microg/ml are optimized in the light of the kinetic data. Results with an average recovery of 98.5% and mean standard deviation of 1.9% are obtained with 9 different amines without interference from tertiary amines, ammonia, amides, imides, anilides, hydrazines and alpha-amino-acids.     

A mild photoactivated hydrophilic/hydrophobic switch

Surface modification using light is one of the most powerful methods for controlling the physical and chemical properties offunctionalized surfaces. In this paper, we report on systems where soft UV irradiation (lambda = 365 nm) converts a "low" activity fluorocarbon to a "high" activity amine-functionalized surface. An amine-functionalized SAM (self-assembled monolayer) is first masked using a tertiary amine catalyzed reaction with an N-hydroxysuccinimidyl carbonyl reagent. This mild, room-temperature reaction introduces a hydrophobic photocleavable nitrobenzyl "protecting group" terminated with a fluorocarbon end-chain. UV irradiation (lambda = 365 nm) of this hydrophobic/fluorocarbon surface cleaves the nitrobenzyl residue, returning the surface to the original hydrophilic/amine-functionalized state. This provides a mild, generic method of producing surfaces with hydrophilic/hydrophobic patterns or patterned with amine functional residues. Two different protecting groups, one terminated with a single and the other with three fluorocarbon end chains, are compared. In the case of the more bulky protecting group, only a small proportion of the amine residues react, but the surface is equally hydrophobic and the amine residues equally well shielded from further reaction. Surfaces are characterized by X-ray photoelectron spectroscopy, ellipsometry, surface potential, and contact angle measurements. Images of the photopatterned SAMs were obtained using scanning electron microscopy.     

Mechanistic study of hydrogen transfer to imines from a hydroxycyclopentadienyl ruthenium hydride. Experimental support for a mechanism involving coordination of imine to ruthenium prior to hydrogen transfer

Reaction of [2,3,4,5-Ph(4)(eta(5)-C(4)COH)Ru(CO)(2)H] (2) with different imines afforded ruthenium amine complexes at low temperatures. At higher temperatures in the presence of 2, the complexes decomposed to give [Ru(2)(CO)(4)(mu-H)(C(4)Ph(4)COHOCC(4)Ph(4))] (1) and free amine. Electron-rich imines gave ruthenium amine complexes with 2 at a lower temperature than did electron-deficient imines. The negligible deuterium isotope effect (k(RuHOH)/k(RuDOD) = 1.05) observed in the reaction of 2 with N-phenyl[1-(4-methoxyphenyl)ethylidene]amine (12) shows that neither hydride (RuH) nor proton (OH) is transferred to the imine in the rate-determining step. In the dehydrogenation of N-phenyl-1-phenylethylamine (4) to the corresponding imine 8 by [2,3,4,5-Ph(4)(eta(4)-C(4)CO)Ru(CO)(2)] (A), the kinetic isotope effects observed support a stepwise hydrogen transfer where the isotope effect for C-H cleavage (k(CHNH)/k(CDNH) = 3.24) is equal to the combined (C-H, N-H) isotope effect (k(CHNH)/k(CDND) = 3.26). Hydrogenation of N-methyl(1-phenylethylidene)amine (14) by 2 in the presence of the external amine trap N-methyl-1-(4-methoxyphenyl)ethylamine (16) afforded 90-100% of complex [2,3,4,5-Ph(4)(eta(4)-C(4)CO)]Ru(CO)(2)NH(CH(3))(CHPhCH(3)) (15), which is the complex between ruthenium and the amine newly generated from the imine. At -80 degrees C the reaction of hydride 2 with 4-BnNH-C(6)H(9)=NPh (18), with an internal amine trap, only afforded [2,3,4,5-Ph(4)(eta(4)-C(4)CO)](CO)(2)RuNH(Ph)(C(6)H(10)-4-NHBn) (19), where the ruthenium binds to the amine originating from the imine, showing that neither complex A nor the diamine is formed. Above -8 degrees C complex 19 rearranged to the thermodynamically more stable [Ph(4)(eta(4)-C(4)CO)](CO)(2)RuNH(Bn)(C(6)H(10)-4-NHPh) (20). These results are consistent with an inner sphere mechanism in which the substrate coordinates to ruthenium prior to hydrogen transfer and are difficult to explain with the outer sphere pathway previously proposed.     

Spectrophotometric and densitometric determination of some amines and hydrazines

A method for spectrophotometric and densitometric determination of amines and hydrazines after oxidation by bis(trifluoracetoxy)iodobenzene is described. Results of the determination of pure amine and hydrazine samples as well as of their ternary mixtures are presented. For densitometric determinations a silica gel layer is used with a solvent system of toluene-pentane-ethanol (2:4:0.5). The colored spots are scanned for light absorption and reflection or emission and the amount of each compound is evaluated.     

Separation and Determination of bis (2,2,6,6- Tetramethyl-4-Piperidyl) Maleate and Its Reaction Solution with Ion Suppression Chromatography

Bis (2,2,6,6-tetramethyl-4-piperidyl) maleate (BPM) is a kind of intermediate for newer hindered amine light stabilizer, being of high value for study and application. However, the report about the analysis of BPM and its reaction solution has not been seen till now. In the synthesis reaction solution of BPM, besides great quantity of solvent,xylene mixture, ethyl benzene, there are a little unreacted dimethyl maleate (DMM), 2,2,6,6,-tetramethyl-4-piperdinol (TMP) and BPM. BPM is weekly alkaline polyfunctional organic compound, dissociating easily in aqueous solution. When analyzing it with common liquid chromatography,some problems such as trailing peaks, asymmetric peaks, low resolution, unstable retention time will appear. In this paper,the ion suppression chromatography (ISC) technique was successfully used in BPM synthesis process to separate and analyze,quantitatively the raw material, reaction solution and product. The experimental result is of a certain value in guiding the study on BPM synthesis.     

Mass spectrometry of 4-amino-4′-nitroazobenzene compounds

The mass spectra of 32 substituted 4-amino-4′-nitroazobenzene compounds have been recorded and the most intense peaks have been used to characterize these spectra. It was found that the spectra of 4-amino-4′-nitroazobenzene compounds are characterized by peaks due to: (1) molecular ions, (2) fragment ions formed by cleavage of one of the carbon-nitrogen bonds adjacent to the azo linkage with the positive charge remaining with the amine fragment, (3) ions formed by cleavage alpha to the amine nitrogen with the charge remaining with the amine substituent, (4) ions formed by cleavage beta to the amine nitrogen with the loss of the amine substituent fragment, (5) secondary ions formed by cleavage beta to the amine nitrogen with the loss of the amine substituent fragment from the primary amine fragment (2), and (6) ions formed by loss of NO from the molecular ion. This work shows that 4-amino-4′-nitroazobenzene compounds exhibit fragmentation which is dependent in a consistent manner on the types of substituents. This work provides a basis for a systematic approach to the identification of 4-amino-4′-nitroazobenzene compounds.     

新型电致发光材料1,5-萘二胺衍生物的合成和性质研究

合成了一种新型的有机电致发光材料:N,N'-二苯基-N,N'-二(1-萘基)-1,5-萘二胺(NPN),测定了其吸收光谱和荧光发射光谱.该材料具有很好的热稳定性,DSC测定其玻璃化温度(T_g)高达127℃,循环伏安法(CV)测定其电离势(I_p)为5.30eV,可望用作有机电致发光空穴传输或蓝色发光材料.     

双功能受阻胺与紫外线吸收剂并用的协同效应研究

本文用IR、UV、ESR、TLC等方法研究了新型的双功能受阻胺光稳定剂,Tinuvin-144 [2-(4′-羟基-3′,5′-二叔丁基)苄基-2-正丁基丙二酸五甲基哌啶醇酯]与紫外线吸收剂,UV-531(2-羟基-4-正辛氧基二苯甲酮)和UV-327(2-[2′-羟基-3′,5′-二叔丁基]-5-氯 代苯并三唑)并用体系对聚丙烯光稳定化的并用效应。结果表明,Tinuvin-144与UV-531,UV-327并用时均具有良好的协同效应,144对531,327或531,327对144的光分解均具有相互的保护作用。结果还表明,144与531或327无论在模拟体系或聚丙烯中,在诱导期内均不存在促使他们消耗的化学反应,提出了协同作用的机理。     

Oxidation of 4-substituted TEMPO derivatives reveals modifications at the 1- and 4-positions

Potenital pathways for the deactivation of hindered amine light stabilisers (HALS) have been investigated by observing reactions of model compounds--based on 4-substituted derivatives of 2,2,6,6-tetramethylpiperidine-N-oxyl (TEMPO)--with hydroxyl radicals. In these reactions, dilute aqueous suspensions of photocatalytic nanoparticulate titanium dioxide were irradiated with UV light in the presence of water-soluble TEMPO derivatives. Electron spin resonance (ESR) and electrospray ionisation mass-spectrometry (ESI-MS) data were acquired to provide complementary structural elucidation of the odd- and even-electron products of these reactions and both techniques show evidence for the formation of 4-oxo-TEMPO (TEMPONE). TEMPONE formation from the 4-substituted TEMPO compounds is proposed to be initiated by hydrogen abstraction at the 4-position by hydroxyl radical. High-level ab initio calculations reveal a thermodynamic preference for abstraction of this hydrogen but computed activation barriers indicate that, although viable, it is less favoured than hydrogen abstraction from elsewhere on the TEMPO scaffold. If a radical is formed at the 4-position however, calculations elucidate two reaction pathways leading to TEMPONE following combination with either a second hydroxyl radical or dioxygen. An alternate mechanism for conversion of TEMPOL to TEMPONE via an alkoxyl radical intermediate is also considered and found to be competitive with the other pathways. ESI-MS analysis also shows an increased abundance of analogous 4-substituted piperidines during the course of irradiation, suggesting competitive modification at the 1-position to produce a secondary amine. This modification is confirmed by characteristic fragmentation patterns of the ionised piperidines obtained by tandem mass spectrometry. The conclusions describe how reaction at the 4-position could be responsible for the gradual depletion of HALS in pigmented surface coatings and secondly, that modification at nitrogen to form the corresponding secondary amine species may play a greater role in the stabilisation mechanisms of HALS than previously considered.     

四个香豆素磺酰氯衍生物的合成及其荧光性能的研究

四个香豆素磺酰氯衍生物的合成及其荧光性能的研究曹秋娥,徐其亨（云南大学化学系,昆明,６５００９１）关键词香豆素磺酰氯衍生物,荧光试剂,荧光性能香豆素衍生物是一类较好的荧光试剂,本文以香豆素为母体,合成了４个香豆素磺酰氯衍生物：４－甲基－７－羟基香豆素...     

Three component ketocoumarin, amine, maleimide photoinitiator II

Three component photoinitiator systems containing N-substituted maleimide/ketocoumarin/tertiary amine have been used for the visible light photopolymerization of acrylate and thiol-ene monomers. Thin-film calorimetry studies were conducted. The polymerization exotherms of these systems with the blue (470 nm) and cyan (505 nm) LED light sources show that the multicomponent initiator package is an effective system for visible light polymerization of acrylate and thiol-ene monomers. Exotherms of a visible light initiator combination of camphorquinone/amine were recorded for comparison purposes.     

丙烯-马来酸哌啶酯共聚物的合成与表征

<正> 以2,2,6,6-四甲基哌啶为母体的衍生物作为受阻胺光稳定剂,其效率约为镍-螯合物光稳定剂的2—6倍,已引起人们的注意,但是小分子受阻胺易于挥发,从而使其光稳定作用较差。为了克服上述缺点,使受阻胺稳定剂高分子化是近年来展的趋势,本文合成了含有“丙烯”单元的高分子受阻胺光稳定剂——丙烯-马来酸哌啶酯共聚物,力求改进它与丙烯的相容性,提高光稳定效率,本文还对共聚物进行表征。     

Rapid determination of oligomeric hindered amine light stabilizers in polymeric materials

Hindered amine light stabilizers are essential for the stabilization of synthetic polymers, particularly for materials used for outdoor applications. Although up to now a considerable number of studies dealing with the analytics of this class of stabilizers had been published, especially the determination of oligomeric hindered amine light stabilizers is still an analytical challenge. In the current work, a fast and simple liquid chromatographic method for the quantitative determination of oligomeric hindered amine light stabilizers is presented. A key aspect of this method is their completely different retention behavior depending on the pH, enabling a single peak elution approach by a pH gradient run. This allows a quantitation with simple UV detection independent of the actual oligomeric composition. Calibration curves within the concentration range relevant for the analysis of real polymer samples (LOQ = 70 mg/L) were constructed with R ² values above 0.99. Spiked extracts from polyolefin samples showed recovery rates between 97.3 and 102.9% for five different commercial hindered amine light stabilizers. Relative standard deviations were between 2.0 and 3.9%. Furthermore, it was demonstrated that the employed approach can be easily adapted for mass spectrometry detection.