Preparation of porous polyimide/in‐situ reduced graphene oxide composite films for electromagnetic interference shielding

Herein we report an easy and efficient approach to prepare lightweight porous polyimide (PI)/reduced graphene oxide (RGO) composite films. First, porous poly (amic acid) (PAA)/graphene oxide (GO) composite films were prepared via non‐solvent induced phase separation (NIPS) process. Afterwards PAA was converted into PI through thermal imidization and simultaneously GO dispersed in PAA matrix was in situ thermally reduced to RGO. The GO undergoing the same thermal treatment process as thermal imidization was characterized with thermogravimetric analysis, Raman spectra, X‐ray photoelectron spectroscopy and X‐ray diffraction to demonstrate that GO was in situ reduced during thermal imidization process. The resultant porous PI/RGO composite film (500‐µm thickness), which was prepared from pristine PAA/GO composite with 8 wt% GO, exhibited effective electrical conductivity of 0.015 S m^?1 and excellent specific shielding efficiency value of 693 dB cm² g^?1. In addition, the thermal stability of the porous PI/RGO composite films was also dramatically enhanced. Compared with that of porous PI film, the 5% weight loss temperature of the composite film mentioned above was improved from 525°C to 538°C. Moreover, tensile test showed that the composite film mentioned above possessed a tensile strength of 6.97 MPa and Young's modulus of 545 MPa, respectively. Copyright © 2016 John Wiley & Sons, Ltd.     

Conducting film from graphite oxide nanoplatelets and poly(acrylic acid) by layer-by-layer self-assembly

A [poly(acrylic acid)/graphite oxide]n [(PAA/GO)(n)] film with a conductivity of 60 S.cm(-1) was grown layer-by-layer (LbL) using Langmuir-Blodgett self-assembly techniques. GO nanoplatelets were prepared from natural graphite by oxidizing, ball milling, exfoliating, and modifying with cationic surfactant cetyltrimethylammonium bromide (CTAB). The X-ray diffraction pattern reveals that PAA and GO stack orderly LbL and repeatedly in the (PAA/GO)(n) films, and about three carbon molecular layers are superposed on each GO sheet. Fourier transform infrared spectra offer evidence for the interaction between the carboxylic groups on PAA and the CTAB on the surface of the GO nanoplatelets. Electrochemistry measurements show that the conductivity of the (PAA/GO)(n) film depends on the carbon-carbon interlayer height of the GO sheet, and the (PAA/GO)(n) film has a typical positive temperature coefficient effect above the PAA melting temperature. The atomic force microscopy images reveal that CTAB molecules stack in a well-ordered head-to-head structure on both surfaces of the GO nanoplatelets and the GO nanoplatelets are embeded between PAA layers.     

Synthesis and characterization nanocomposite of the graphene oxide/polyacrylic acid modified with 2-mercaptoethanol

In this research, synthesis and characterization of the nano-graphene oxide (GO) based on the modified polyacrylic acid (PAA) have been carried out. Formation of esteric bonds between the carboxyl functional groups of the GO surface and the hydroxyl groups of PAA was confirmed by FTIR spectroscopy. The result of this synthesis is covalent modification of graphene oxide during the polymerization process and this modification has caused improvement and change in some properties of graphene oxide including solubility of nanocomposite. Additionally, structure and stability of composite were studied by SEM, XRD and TGA.     

Formation of thin calcium carbonate films with aragonite and vaterite forms coexisting with polyacrylic acids and chitosan membranes

CaCO3 crystallization on a chitosan membrane was studied using diffusion of (NH4)2CO3 vapors into a CaCl2 solution containing differing added amounts of two polyacrylic acids (PAAs) with molecular weights of ca. 2.0 x 10(3) and ca. 4.5 x 10(4). The coexistence of PAA and the chitosan membranes produced thin CaCO3 island crystals, which developed into a continuous CaCO3 film on the membranes. Continuous CaCO3 films consisting of only aragonite formed on the chitosan membranes at the optimum amount of PAA. When the amount of PAA is not optimum, the polymorph of CaCO3 switches from aragonite to vaterite, and the morphology has a tendency to become an isolated island structure. The formation of the aragonite and vaterite island crystals and the appearance of a range of added PAA suitable for their formation are explained by the action of two parallel phenomena: (a) the high concentration of Ca2+ ions in the chitosan membrane vicinity is achieved by the interaction between the -COO- groups of PAA adsorbed by the -NH3+ groups of the chitosan membrane through an electrostatic force and free Ca2+ ions in the CaCl2 solution, which produces the high supersaturation with CaCO3 in the membrane vicinity during CO2 diffusion; (b) PAA, remaining as mobile carboxylic anions in the CaCO3 solution, inhibits the growth of the CaCO3 island crystals by its adsorption. The CaCO3 supersaturation in the membrane vicinity is controlled by regulating the balance of these phenomena, which leads to the formation of the desired CaCO3 polymorph.     

借助聚丙烯酸制备铜粒子修饰电极并用于双氧水的电催化性能研究

利用羧基对金属离子的络合作用在电极表面原位制备金属粒子用于电催化过氧化氢(H2O2). 首先在电极表面电沉积聚丙烯酸, 然后化学吸附铜离子, 再用水合肼将其还原成零价铜. 铜粒子簇均匀分散在聚丙烯酸网络中, 其尺寸可通过吸附铜离子的数量和吸附-还原次数来控制. 由于铜微粒的电催化作用, 该修饰电极对H2O2表现出了良好的电流响应. 运用该方法可以在电极表面制备多种金属微粒, 并且聚丙烯酸的自由羧基可以与氨基反应, 从而可共价固定带氨基的酶和抗体, 有望构建多种新型的化学和生物传感器.     

Synthesis and properties of low‐dielectric‐constant polyimides with introduced reactive fluorine polyhedral oligomeric silsesquioxanes

A high‐performance, low‐dielectric‐constant polyimide (PI) nanocomposite from poly(amic acid) (PAA) cured with a reactive fluorine polyhedral oligomeric silsesquioxane (POSS) isomer was successfully synthesized. The features of this reactive fluorine POSS isomer [octakis(dimethylsiloxyhexafluoropropylglycidyl ether)silsesquioxane (OFG)] provided two important approaches (containing fluorine or being porous in the polymer matrix) of reducing the dielectric constant of PI. This reactive POSS isomer had an average of four epoxy groups and four fluorine groups on the POSS cage, and the epoxy groups could be cured with PAA to form a network framework of a PI/POSS nanocomposite. The PI/OFG nanocomposite had a high crosslinking density, high porosity (24.3%), high hydrophobicity, and low polarizability. These properties enhanced the thermal (glass‐transition temperature ～ 362 °C) and dielectric (dielectric constant ～2.30) properties of PI more than other POSS derivatives introduced into the PI backbone. A large number of small POSS particles (<10 nm) were embedded inside the PI matrix when the OFG content was low, whereas interconnected POSS aggregation domains were observed when the OFG content was high. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5391–5402, 2006     

Miscibility of polyimide with polymeric primer and its influence on adhesion of polyimide to the primed copper metal: Effect of precursor origin

Poly(amic acid) (PAA) and poly(amic diethyl ester) (PAE) precursors of poly(4,4′-oxydiphenylene biphenyltetracarboximide) (BPDA-ODA PI) were synthesized. Miscibility behaviors of these precursors with poly(arylene ether benzimidazole) (PAEBI), which is a good adhesion primer for copper metal, were investigated in N-methyl-2-pyrrolidone (NMP) as well as the condensed state and the imidized state. For the PAA/PAEBI blend over the whole range of compositions, no cloud point was measured either in the NMP solution, the condensed state, or the imidized state. Furthermore, no aggregation of PI chains in the blend films was detected by X-ray diffraction. These results indicate that the PAA and PAEBI are completely miscible at the molecular level, consequently leading to the miscible PI/PAEBI blend. This miscibility might result from the strong interaction via the complex formation of imidazole groups of the PAEBI and carboxylic acid groups of the PAA precursor. In contrast, the miscibility of PAE/PAEBI blend in NMP was limited up to a concentration of 13.5–36.3 wt %, leading to a phase separation in the soft-baked and imidized blend. The blend films rich with one component were optically transparent, which might be due to the phase-separated domains much smaller than 1 μm. The immiscibility might result from the relatively weak interactions of imidazole groups of PAEBI with both the ester and amide linkages in the PAE precursor. The difference in the miscibilities of PAEBI with the PAA and PAE precursors was reflected in the adhesion of PI/PAEBI/copper joints: higher miscibility gave higher adhesion strength. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2806–2814, 1999     

Thermally modulated multilayered graphene oxide for hydrogen storage

We have obtained high pressure H(2) isotherms with respect to the interlayer distance of multilayered graphene oxide (GO) modulated by thermal annealing. The maximum storage capacity is 4.8 (0.5) wt% at 77 K (298 K) and at 9.0 MPa pressure. We found the optimum GO interlayer distance for maximum H(2) uptake at 6.5 ?, similar to the predicted distances from first-principles calculations for graphite materials. Our results reveal that multilayered GO can be a practical material of choice to allow the use of graphene as a hydrogen storage material, provided that only small amounts of O and OH functional groups exist as spacers on GO sheets.     

Bioinspired crystallization of CaCO3 coatings on electrospun cellulose acetate fiber scaffolds and corresponding CaCO3 microtube networks

This article describes the mineralization behavior of CaCO(3) crystals on electrospun cellulose acetate (CA) fibers by using poly(acrylic acid) (PAA) as a crystal growth modifier and further templating synthesis of CaCO(3) microtubes. Calcite film coatings composed of nanoneedles can form on the surfaces of CA fibers while maintaining the fibrous and macroporous structures if the concentration of PAA is in a suitable range. In the presence of a suitable concentration of PAA, the acidic PAA molecules will first adsorb onto the surface of CA fibers by the interaction between the OH moieties of CA and the carboxylic groups of PAA, and then the redundant carboxylic groups of PAA can ionically bind Ca(2+) ions on the surfaces of CA fibers, resulting in the local supersaturation of Ca(2+) ions on and near the fiber surface, which can induce the nucleation of CaCO(3) on the CA fibers instead of in bulk solution. Calcite microtube networks on the macroscale can be prepared by the removal of CA fibers after the CA@CaCO(3) composite is treated with acetone. When the CA fiber scaffold is immersed in CaCl(2) solution with an extended incubation time, the first deposited calcite coatings can act as secondary substrate, leading to the formation of smaller calcite mesocrystal fibers. The present work proves that inorganic crystal growth can occur even at an organic interface without the need for commensurability between the lattices of the organic and inorganic counterparts.     

Unique fluorescence behavior of perylenetetracarboxydiimides in polyimide systems

Perylenetetracarboxydiimide (PEDI) molecularly dispersed in polyamic acid (PAA) and polyimide (PI) films has unique fluorescence properties. An originally strong fluorescence of PEDI is efficiently quenched in the PAA films. The systematic variation of the chain structure of the PAA matrices revealed that the aromatic amide groups in the PAA chains function as a quencher. When a PAA derived from 3,4,3′4′-biphenyltetracarboxylic dianhydride (BPDA) and p-phenylenediamine (PDA), BPDA/PDA, was used as a matrix polymer, the fluorescence of the dye dispersed in the film increased abruptly as imidization of the matrix proceeds. But annealing at temperatures higher than 320°C in the step-heating process caused a gradual decrease in the fluorescence intensity. The decreased intensity results from the dye–PDA units interactions intensified by the denser molecular packing of the matrix polymer chains. PEDI shows significant dependence of the fluorescence intensity on the chain structure of the PI matrices. In the various PI films containing a fixed diamine component, the dye fluorescence intensity reduces linearly with an increase in the intramolecular charge transfer ability of the PI matrices. From the result, we propose a fluorescence quenching mechanism through multistep electron transfer processes. The BPDA/PDA polyimide matrix leads to a strong PEDI fluorescence whereas the pyromellitic dianhydride (PMDA)-based PI matrices do not. For the blends composed of these PIs, the fluorescence of PEDI bound into the main chains provides a valuable indicator of the miscibility on the molecular level. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 827–840, 1998     

Amperometric titration of calcium,strontium and barium and their mixtures in presence of large amounts of alkali metal salts

Trace amounts of alkaline earth metals are titrated with triethylenetetraaminehexaacetic acid; lead(II) is added as indicator and the current is measured by square-wave polarography. At pH 13.3, calcium, strontium and barium give a common end-point corresponding to the total content of alkaline earth ions. Copper and cadmium interfere but small concentrations of Ni, Al, Mg, Zn, Mn(II) and Fe(III) are tolerated. The alkaline earth metals can be determined in the presence of 1000-fold amounts of lithium and 10⁵- fold amounts of sodium or potassium ions.     

炭黑的“impurity-free”改性及其在聚酰亚胺薄膜中的分散特性研究

利用聚酰胺酸(PAA)在研磨过程形成炭黑(CB)的"impurity-free"分散剂制备纳米CB填充聚酰亚胺(PI)高性能复合薄膜.球磨CB和PAA/N-甲基-2-吡咯烷酮(NMP)溶液的混合液,PAA在研磨过程中降解形成活性分子,原位生成与CB表面具有反应活性和强烈物理吸附能力的"impurity-free"分散剂.拉曼、红外以及紫外-可见光吸收光谱证实了降解PAA分子对CB的改性作用.经改性的CB与PAA溶液共混,涂覆固化制备PI/CB复合薄膜.TEM照片表明该分散剂可以显著促进CB粒子在PI基体中的均匀分散,分散粒径约为200nm.力学性能测试和导电性能测试表明PI/CB复合薄膜的断裂伸长率大幅提高,电阻率(ρ)重复性浮动范围从2个数量级降到1个数量级.进一步研究发现,研磨过程中添加高分子量PAA更有利于CB在PI基体中的均匀分散.     

Heavy metal ions removal by nano-sized spherical polymer brushes

Nano-sized spherical polymer brushes(SPBs) consisting of both a polystyrene(PS) core and a brush shell of poly(acrylic acid)(PAA), poly(N-acrylcysteamine)(PSH), or poly(N-acrylcysteamine-co-acrylic acid)(P(SH-co-AA)), were prepared by photo-emulsion polymerization. The core-shell structure was observed by dynamic light scattering and transmission electron microscopy. Due to the strengthened Donnan effect, the PAA brush can adsorb heavy metal ions. Effects of the contact time, thickness of PAA brush and pH value on the adsorption results were investigated. Due to the coordination between the mercapto groups and heavy metal ions as well as the electrostatic interactions, SPBs with mercapto groups are capable to remove heavy metal ions selectively from aqueous solutions. The order of adsorption capacity of the heavy metal ions by SPBs with mercapto groups is: Hg2+ ≈ Au3+ Pb2+ Cu2+ Ni2+. The adsorbed heavy metal ions can be eluted from SPB by aqueous HCl solution, and the SPBs can be recovered. After three regenerations the recovered SPBs still maintain their adsorption capacity.     

Graphene Oxides Prepared by Hummers’, Hofmann’s,and Staudenmaier’s Methods: Dramatic Influences on Heavy‐Metal‐Ion Adsorption

Graphene oxide (GO), an up‐and‐coming material rich in oxygenated groups, shows much promise in pollution management. GO is synthesised using several synthetic routes, and the adsorption behaviour of GO is investigated to establish its ability to remove the heavy‐metal pollutants of lead and cadmium ions. The GO is synthesised by Hummers’ (HU), Hofmann’s (HO) and Staudenmaier’s (ST) methodologies. Characterisation of GO is performed before and after adsorption experiments to investigate the structure–function relationship by using Fourier‐transform infrared spectroscopy and X‐ray photoelectron spectroscopy. Scanning electron microscopy coupled with elemental detection spectroscopy is used to investigate morphological changes and heavy‐metal content in the adsorbed GO. The filtrate, collected after adsorption, is analysed by inductively coupled plasma mass spectrometry, through which the efficiency and adsorption capacity of each GO for heavy‐metal‐ion removal is obtained. Spectroscopic analysis and characterisation reveal that the three types of GO have different compositions of oxygenated carbon functionalities. The trend in the affinity towards both Pb^II and Cd^II is HU GO>HO GO>ST GO. A direct correlation between the number of carboxyl groups present and the amount of heavy‐metal ions adsorbed is established. The highest efficiency and highest adsorption capacity of heavy‐metal ions is achieved with HU, in which the relative abundance of carboxyl groups is highest. The embedded systematic study reveals that carboxyl groups are the principal functionality responsible for heavy‐metal‐ion removal in GO. The choice of synthesis methodology for GO has a profound influence on heavy‐metal‐ion adsorption. A further enrichment of the carboxyl groups in GO will serve to enhance the role of GO as an adsorbent for environmental clean‐up.     

Dynamic dispersion stability of graphene oxide with metal ions

Graphene oxide(GO),an important chemical precursor of graphene,can stably disperse in aqueous surrounding and undergo aggregation as metal cations introduced.The usual instability of GO with ions is caused by the shielding effect of ions and crosslinking between GO and ions.However,the dynamic stability of GO under ions exchange still remains unclear.Here,we investigated the dynamic dispersion stability of GO with metal ions and observed a redispersion behavior in concentrated Fe~(3+) solution,other than permanent aggregation.The exchange with Fe~(3+) ions drives the reversion of zeta(ζ) potential and enables the redispersion to individual GO-Fe~(3+) complex sheets,following a dynamic electric double layer(EDL) mechanism.It is found that the specifically strong electrostatic shielding effect and coordination attraction between Fe~(3+) and functional oxygen groups allows the selective redispersion of GO in concentrated Fe~(3+) solution.The revealed dynamic dispersion stability complements our understanding on the dispersive stability of GO and can be utilized to fabricate graphene-metal hybrids for rich applications.     

Non‐surfactant template‐directed synthesis of SiO2‐polyimide hybrid self‐standing films with ordered mesoporous structure

The silica‐PI hybrid self‐standing films with ordered mesoporous structure have been prepared by using dibenzoyl‐L ‐tartaric acid (L ‐DBTA) as non‐surfactant template under mild sol–gel route. Polyimide matrix was obtained from polyamic acid (PAA) via thermal imidization process and the template was removed in this process. The PI‐based hybrid film with 20 wt% SiO₂ obtained from DBTA presented the ordered mesoporous channels with average pore size of about 2.0 nm and BET surface area of 1167 m²/g. FTIR and SEM studies indicated that the hydrogen bond interaction between the carboxylic groups of DBTA and benzamide bonds of PAA made the PAA possibly participate in the assembly process of the aggregates of the non‐surfactant template molecules. The mechanical, thermal and some physical properties of these hybrid films materials were also characterized. Copyright © 2010 John Wiley & Sons, Ltd.     

氧化石墨烯/聚电解质层层自组装制备单价离子选择性膜

采用层层自组装法在改性聚丙烯腈(PAN)膜表面交替沉积聚乙烯亚胺(PEI)和聚丙烯酸-氧化石墨烯(PAA-GO)混合液,制得了单价离子选择性复合膜。X射线衍射(XRD)测试结果表明成功合成了氧化石墨烯(GO)并在复合膜中均匀分散。扫描电镜(SEM)观察结果证实了多层聚电解质PEI/PAA-GO成功地组装在基膜上,并用紫外-可见(UV-Vis)光谱进一步证实了组装过程的均匀性和连续性。接触角和性能测试表明加入GO后,复合膜的亲水性和单价阳离子的选择性明显增大。这种高通量、高选择性的防污复合膜在分离和水的软化方面有很好的应用前景。     

Preparation of mixed matrix membranes based on polyimide and aminated graphene oxide for CO2 separation

The aminated graphene oxide (GO) was prepared by the functionalization of pristine GO with ethylenediamine and then dispersed into the poly(amic acid) (the precursor of polyimide [PI]) solution followed by the chemical imidization to successfully fabricate the PI/amine‐functionalized GO mixed matrix membranes (MMMs) using in‐situ polymerization method. Chemical structure and morphology of the GO before and after amine modification were characterized by scanning electron microscopy, Raman spectrum, Fourier transform infrared, and X‐ray photoelectron spectroscopy. Scanning electron microscopy indicated that fine dispersion of GO throughout PI matrix was achieved, which indicates that the in‐situ polymerization approach can enhance the interfacial interaction between the GO and the PI matrix, and then improve the dispersion of carbon material in the polymer matrix. Compared with the conventional solution mixture method, the MMMs prepared with in‐situ polymerization method showed excellent CO₂ permeability and CO₂/N₂ selectivity. The MMMs doped with 3 wt.% aminated GO exhibited maximum gas separation performance with a CO₂ permeability of 12.34 Barrer and a CO₂/N₂ selectivity of 38.56. These results suggest that the amino groups on GO have strong interaction with the CO₂ molecules, which can significantly increase the solubility of polar gas. Our results provide an easy and efficient way to prepare MMMs with good mechanical behavior and excellent gas separation performance.     

Stabilization of gamma alumina slurry for chemical-mechanical polishing of copper

Stabilization of gamma-alumina suspension for chemical-mechanical polishing (CMP) of copper was investigated. Citric acid and poly(acrylic acid) (PAA) (M(w)=5000) were used as dispersant. The stability of suspension was evaluated from the changes in viscosity, particle size and zeta potential. It appears that metastable gamma-alumina mainly due to its high specific surface area and to the presence of aluminol groups on its surface is progressively transformed to bayerite (beta-Al(OH)(3)) by hydration procedure. Citric acid molecules were adsorbed onto gamma-alumina surface effectively and exhibited the excellent hydration inhibition effect. Although citrate-alumina surface complexes give barrier to the flocculation, the repulsion potential is based mainly on the electrostatic repulsion, thereby steric hindrance caused by the adsorption of these small molecules is very weak. The electrosteric repulsion, which provides more effective dispersion stability than electrostatic repulsion force, can be expected by using polyelectrolyte such as PAA; however, adsorbed layers of PAA onto solid/liquid interface are loosely formed. Therefore, a large amount of PAA was required to inhibit the surface hydration of gamma-alumina suspension, thereby the excess addition of PAA decreased the electrosteric repulsion and re-bridging of the dispersant between particles caused an increase in suspension viscosity. Therefore, synergistic effect can be expected in mixed dispersant system of citric acid and PAA, since small citric acid molecules are adsorbed faster than PAA, inhibiting the progress of surface hydration, and then adsorbed PAA layers exhibit the effective electrosteric repulsion interaction between particles with a small amount compared with PAA alone. It was revealed that the gamma-alumina slurry dispersed by mixed dispersant exhibited the improved removal rate of Cu layer by CMP polishing test.     

Preparation, structure and properties of porous polyimide films via PAA/PU alloy

A new route to porous polyimide (PI) films with pore sizes in the nanometer regime was developed. A polyamic acid (PAA)/polyurethane (PU) blend with PU as the disperse phase was first prepared via in situ polymerization of pyromellitic dianhydride and 4,4-oxydianiline in PU solutions. Porous PI films were obtained from PAA/PU films by thermolysis of PU at 360°C and imidization of PAA at 300°C, respectively. Fourier transform infrared spectroscopy and thermal gravimetric analysis were used to detect the imidization and thermolysis processes of PAA/PU blends under thermal treatment. The microporous structure of the PI films was observed by transmission electron microscopy. It was found that the size and content of pores increased with an increase in the PU mass fraction in the PAA/PU blend up to 20%. Because of the existence of nanopores, the dielectric constant of PI films decreased by a wide margin and was less than 2.0 at a PU mass fraction of 20%. It implies that this is an effective means to reduce the dielectric constant of PI, but it also causes the decrease of tensile strength and the rise of water absorption. Translated from Chemistry Journal of Chinese Universities 2006, 27(1): (in Chinese)