A simple, efficient and green approach to the synthesis of 1H-pyrazolo[1,2-b]phthalazine-5,10-diones has been developed via one-pot three-component reaction of aromatic aldehyde, malononitrile and phthalhydrazide catalyzed by zinc–proline complex (Zn[L-proline]2) using H2O: PEG400?=?6: 4 as solvent. Atom economy, good to excellent yield, operational simplicity and easy workup are important features of this method.
Graphical abstractThe AHA coupling of amines, haloalkane and alkynes under UV visible light was achieved with a higher yield in the presence of Au/Fe2O3. The catalyst was prepared by two methods using different gold content and then characterized by XRD, UV–vis, BET, TEM, ICP-OES and TPR spectroscopies. A comparative study of the ordinary and photocatalytic conditions, showed that the UV visible light could activate the gold nanoparticles and lead to the formation of CH2Cl? and Cl? radicals through CH2Cl2 fragmentation. The propargylamine was afforded at low temperature and a short time using 2% Au/Fe2O3. The catalyst was stable for five cycles with good photoactivity.
Graphical abstractToday, plant extracts based on synthetic procedures have drawn consideration over conventional methods like physical and chemical procedures to synthesize nanomaterials. Green synthesis of nanomaterials has become an area of interest because of numerous advantages such as non-hazardous, economical, and feasible methods with a variety of applications in biomedicine, nanotechnology and nano-optoelectronics and as catalysts for various organic transformations. In this research, silver nanoparticles were deposited on the surface of nano-silica spheres by an in-situ reduction of Ag+ ions using an aqueous extract of Thymus kotschyanus aerial parts as a natural reducing and a capping agent. The result recorded from ultraviolet–visible (UV–Vis) spectrometer, Fourier transform infrared spectroscopy (FT-IR), thermal gravimetric analysis, scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM–EDS) and X-ray powder diffraction supports the biosynthesis and characterization of Ag/SiO2 nanoparticles. The results indicated that the average size of Ag/SiO2 nanoparticles is 25–60 nm. The Ag/SiO2 nanoparticles act as an environmentally friendly heterogeneous catalyst in the synthesis of spirooxindoles via the three-component condensation reaction of isatins, activated methylene reagents, and 1,3-dicarbonyl compounds in aqueous media, and the desired products were obtained with yields ranging from 90 to 98%. The catalyst can be recovered easily and used repetitively without significant loss of catalytic activity.
Graphical abstractThe one-pot catalytic conversion of cellulose into ethylene glycol (EG) is an attractive way of biomass utilization. However, low-cost, efficient, and stable catalysts are the premise and research challenges of industrial application. Herein, the magnetic recyclable W–Ni@C catalyst was synthesized by in-situ pyrolysis of Ni-MOFs impregnated with ammonium metatungstate. Compared with the Ni-W bimetallic catalysts prepared by the impregnation method and the sol–gel method, the W–Ni@C catalyst for cellulose hydrogenolysis reaction can achieve a higher ethylene glycol yield (67.1% vs 43.3% and 42.6%) and 100% of cellulose conversion rate. The uniformly dispersed Ni nanoparticles and abundant defective WOx were formed in a reductive atmosphere generated in pyrolysis of Ni-MOFs, which was indispensable for the hydrogenolysis of cellulose into EG. Besides, the hierarchical porous carbon derived from organic ligands in Ni-MOFs reduces the mass transfer resistance while confining Ni nanoparticles and WOx to prevent their leaching, effectively enhancing the stability of the W–Ni@C catalyst. Therefore, the remarkable catalytic performance, the simple and effective recovery method as well as satisfying stability would make W–Ni@C become a promising catalyst for the conversion of cellulose to EG.
Graphical abstractN-Methylpyrrolidine catalyzed, concise and attractive synthesis of a new class of 3-hydroxy-3,5/6-di-aryl-1H-imidazo[1,2-a]imidazol-2(3H)-ones was attained with impressive yields, in the presence of EtOH as a solvent, by means of a convenient and elegant condensation reaction between different aryl glyoxal monohydrates and guanidine hydrochloride under reflux conditions. Some specific merits of the current procedure, including encompasses low operating cost, availability of the starting substrates, reasonable reaction times, high reaction yield, operational simplicity, cleaner reaction profile, no harmful by-products, and the isolated product is in pure form. Structures of all the freshly synthesized products have been deduced by their FT-IR, 1H-NMR, 13C-NMR, Mass spectrometry data and microanalysis.
Graphical abstractA green, highly efficient, and eco-friendly protocol for Knoevenagel–Michael addition reaction is reported in Chickpea leaf exudates (CLE) as a naturally sourced biosurfactant. The reactions between dimedone/4-hydroxycoumarins and a variety of aryl aldehydes were carried out in presence of CLE to afford diketodiols/biscoumarins. The synthetic pathway complies with several key requirements of green chemistry principles such as the employment of natural feedstock as green reaction media, ambient temperature, atom economy along with natural biosurfactant type Bronsted acids, and recyclable and biodegradable catalyst which led to a 28-fold increase in molar efficiency versus industrial standard protocols. Its dynamic phase is confirmed by the optical microscopy technique and critical micelle concentration measurement. The notable advantages of the present protocol were simple work-up procedure, high yield within short reaction time, easy separation of products, avoiding tedious column chromatography thus making the protocol environmentally friendly, sustainable, and economical.
Graphical abstractIn the present research, magnesium aluminate spinel was prepared as catalyst support using a novel, facile, and efficient mechanochemical method. The Co-promoted catalysts with 20 wt.% of Ni were fabricated using an impregnation route and the samples were analyzed by the X-ray diffraction (XRD), N2 adsorption/desorption (BET), temperature-programmed reduction and desorption (H2-TPR and O2-TPD), and field emission scanning electron microscopy (FESEM) tests. The results confirmed that all samples have a mesoporous structure with a high specific surface area and the presence of cobalt caused complete CH4 oxidation at low temperatures, and no side reactions were observed. The results indicated that the 3%Co-20%Ni/MgAl2O4 catalyst was the optimal sample among the prepared catalysts, owing to the improvement of reduction features and oxygen mobility. The 50 and 90% of methane conversion was obtained at 530 and 600 °C, respectively. Also, the influence of calcination temperature, GHSV, and feed ratio was determined on the catalytic activity. The obtained outcomes revealed that the calcination temperature has a significant effect on the textural properties and catalytic efficiency. The sample calcined at 700 °C showed the weakest performance, which was related to the sintering of particles at high temperatures. The catalytic stability showed that the 3%Co-20%Ni/MgAl2O4 has acceptable stability during 600 min time of reaction.
Graphical abstractThe triethylamine-based nanomagnetic ionic liquid, [(Et)3 N-H]FeCl4, was synthesized, and its structural and chemical characteristics were detected. The thermogravimetric analysis indicated its high thermal stability with a decomposition temperature higher than 300 °C. Additionally, [(Et)3 N-H]FeCl4 was used to efficiently catalyze the synthesis of xanthene derivatives under solvent-free conditions at 120 °C. [(Et)3 N-H]FeCl4 was recycled and reused at least five times.
Graphical abstractHere, iron, sulfur and poly(ethylene glycol) doping to TiO2 nanoparticles toward the effect on photodegradation of the methylene blue (MB) and Evans blue (EB) was investigated. The present nanostructured photocatalysts displayed notable catalytic activity for the decomposition of colorants in water under visible light irradiation. The photocatalytic reaction constants of different samples were determined for EB and MB to be 0.007, 0.008, 0.009 and 0.01, 0.026, 0.021 1/min, respectively. The values of optical band gap for pure TiO2, Fe–S/TiO2, and Fe–S/TiO2@PEG were estimated to be 3.21, 2.75, and 2.81, respectively. X-ray analysis was performed and correlated with BET, Fe–SEM, and TEM results. The lattice structure was studied by W–H (Williamson–Hall) and H–W (Halder–Wagner) methods with a different assumption in the isotropic and homogenous nature. The results revealed that the SSP model shows the most accuracy and adaption to determine the lattice structure.
Graphic abstractHerein, a green and efficient heterogeneous and photocatalytic system for the oxidation of bisnaphthols in acetonitrile under light-emitting diode will be presented. In this reaction, aerial oxygen and H2O2 have been used as oxidant in the presence of copper ferrite nanoparticles and N-hydroxyphthalimide as an organic co-catalyst. Copper ferrite nanoparticles were magnetically separated, the efficiency of which remained nearly unchanged up to five cycles. Magnetic copper ferrite nanoparticles were synthesized by sol–gel method and characterized by XRD, FT-IR, SEM, TEM, VSM and DRS analysis. In this project, both sets of diastereomers were formed.
Graphical abstractCatalytic system for the oxidation of bisnaphthols.
In CO2 transformation catalysis, the synthesis of cyclic carbonates using two classes of MOF catalysts viz., zeolitic imidazolate frameworks (ZIF) and MOFs with carboxylate-capped SBUs have gained large attention. Herein we propose the strategy of employing a unified multifunctional framework formed in the metal-centered assembly of imidazole and amino-carboxylates for CO2 transformation, such as propylene carbonate (PC) by the cycloaddition of CO2 with propylene oxide. The framework {[Cu(L-asp)(1,4-bix)0.5]·3H2O}n (CuAspBix) comprises of the amino acid building units, L-aspartic acid (L-Asp) and the flexible ligand, 1,4-bis(imidazole-1-yl methyl)benzene [1,4-Bix]. The 1,4-Bix ligand with imidazole terminals renders elongated M-M distances and flexibility in comparison with pristine ZIF materials. The cumbersome synthesis procedure poor phase purity of the bulk catalyst in solvothermal conditions were improved by a microwave-assisted synthesis, preserving the structural and physicochemical properties. Minimal energy input or room temperatures for the catalysis occurred via the synergistic participation of CuAspBix and quaternary ammonium bromide salt, demonstrated by density-functional theory computational studies to propose mechanistic pathway of the reaction. Reaction conditions were optimized by altering the parameters. The heterogeneous catalyst was reused four times without a significant change in activity.
Graphic abstractd-Sorbitol-cored PAMAM dendrimer (SOR-G1) was effectively synthesized by the ring opening polymerization of epichlorohydrin. The dendrimer was characterized using different spectroscopic and analytical techniques including IR and NMR spectroscopy, TG–DTA, and GPC. Dihydropyrano[3,2-c]chromene derivatives were synthesized using SOR-G1 as a catalyst, and it was synthesized within 30 min in ethanol/water medium and excellent yield was obtained. SOR-G1 acted as a good base catalyst on the basis of amine capacity and good thermal stability. The prepared dihydropyrano[3,2-c]chromene derivatives were characterized using GCMS, LCMS, IR, 1H NMR, and 13C NMR spectra. The catalyst could be reused up to three reaction cycles without losing its catalytic activity.
Graphic abstractA facile green synthesis of platinum nanoparticles (PtNPs) using chlorogenic acid (CGA) as a reducing agent and stabilizing agent has been reported here for the first time to the knowledge of the authors. Well-dispersed PtNPs are synthesized in spherical shapes and are tuned in size by simply changing the molar ratio of H2PtCl6 to CGA, with the same salt, temperature and solvent. The average sizes of the particles were 16.9 ± 4.7, 13.3 ± 4.0, 10.8 ± 3.4, and 7.5 ± 2.3 nm, respectively, corresponding to molar ratios of the initial H2PtCl6/CGA of 1:1, 1:2, 1:3 and 1:4 and decreased with an increase in CGA concentration. Transmission electron microscope; energy-dispersive spectrometer; UV–visible absorption spectra (UV–Vis); and Fourier transmission infrared spectra were used to characterize the PtNPs. Additionally, the advantage of CGA for possible synergistic biological activity was studied through the in vitro antioxidant activity of PtNPs by CGA for capture of free radicals. Our results indicate that CGA is an excellent reducing and stabilizing agent in green synthesis of PtNPs, and these size-tunable PtNPs can provide potential applications in the field of biomedicines.
Graphic abstractIn this research, a new heterogeneous catalyst is fabricated through covalent modification of iron-based metal–organic framework with ionic liquid. In more detail, using 2-aminoterephthalic acid and iron (III) chloride hexahydrate, amino-functionalized metal–organic framework has been synthesized and then reacted with 2,4,6-trichloro-1,3,5-triazine and 1,4-diazabicyclo[2.2.2]octane successively to furnish ionic liquid on metal–organic framework. The as-prepared catalyst was characterized by FTIR, TGA, BET, SEM/EDS, XRD and elemental mapping analysis and then employed for catalyzing synthesis of pyrano [2,3‐d]pyrimidines (with yields of 80–100%) from one-pot three-component reaction of aldehydes, barbituric acid and malononitrile in aqueous media. The catalytic test inferred high catalytic activity of the catalyst, superior to that of IL and metal–organic framework. Furthermore, the catalyst could be recovered and recycled for five reaction runs with preserving its morphology.
Graphic abstractTiO2 nanorods (NRs) have been successfully synthesized via simple hydrothermal technique utilizing TiCl4 as precursor at varied temperature of 160 °C, 200 °C and 250 °C, respectively. Further, thermal treatment was done in the close system at calcinations temperature thrice of the synthesis temperature. The prepared NRs were well characterized for the various physio-chemical natures of the materials. Crystallographic and morphological investigations showed that the samples exhibited high crystallinity with diameter ranges from 300 to 400 nm and length in several micrometers. XPS analysis proved the existence of oxygen defects that were created during the synthesis. The solar photocatalysis showed 81.27%, 92.20% and 58.79% removal of color by NR1, NR2 and NR3, respectively, within 300 min of direct sun irradiation time. The first-order kinetic model fits the better curve with the correlation coefficients of 0.97509, 0.97608 and 0.98417, respectively. Trapping experiments shows the dominant of holes and superoxide as the primary reactive oxygen species.
Graphical abstractA simple and efficient method for the synthesis of pyrazolopyranopyrimidines under solvent-free has been developed. The one-pot multicomponent condensation of arylaldehydes with hydrazine hydrate, ethyl acetoacetate and barbituric acid in the vicinity of a mesoporous basic nanomagnetic catalyst, namely DBU immobilized on Fe3O4@nSiO2@mSiO2 was synthesized in remarkably high yields and in short reaction times. Significantly, this catalyst can be easily separated from the reaction media by applying an external magnet, and can be reused for several cycles.
Graphical abstractIn this work, an environmentally friendly and cost-effective synthetic method of silver nanoparticles (AgNPs) and gold nanoparticles (AuNPs) was successfully performed using aqueous extract of Phlogacanthus turgidus (PT) leaves. The biosynthesis of nanoparticles was optimized for reaction conditions including concentration of metallic ions, temperature, and time using the measurement of UV–Vis spectroscopy. The nanoparticles were well characterized by analytic techniques such as Fourier-transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), high-resolution transmission electron microscope (HR-TEM), and selected area electron diffraction (SAED). The morphological data showed that PT-AgNPs possessed the spherical shape with the size distribution ranging from 5 to 15 nm with a mean size of 10 nm while PT-AuNPs existed in the multiple shape with the size distribution ranging from 5 to 20 nm with a mean size of 12 nm. The antibacterial behavior showed that PT-AgNPs possessed high bioactivity against four bacterial strains including Bacillus subtilis, Staphylococcus aureus, Salmonella typhi, and Escherichia coli. Moreover, the catalytic activity of the biogenic nanoparticles was investigated for catalytic reduction of 2-nitrophenol, 3-nitrophenol, and rhodamine B. The kinetic data showed that the nanoparticles were excellent catalysts with potential applications for environmental treatment.
Graphical abstractIncreasing electromagnetic pollution calls for electromagnetic interference (EMI) shielding materials, especially sustainable, lightweight, and environmentally stable, biomass-based materials. MXene-coated wood (M/wood) is prepared by simply spraying MXene sheets on the wood surface. Varying this spray coating manipulates the shielding performance and its application to different wood species. The M/wood exhibits high electrical conductivity (sheet resistance is only 0.65 Ω/sq) with an excellent EMI shielding effectiveness of 31.1 dB at 8.2?~?12.4 GHz and is also fire retardant. Furthermore, waterborne acrylic resin (WA) is coated on M/wood to enhance environmental stability. The WA coating improves EMI shielding performance stability after water-soaking and drying testing and prevents the peeling of MXene from wood. These satisfactory properties of WA-M/wood and the facile manufacturing approach promote the feasibility of wood-based EMI shielding materials.
Graphical abstractSeveral new derivatives of thiazolidine-2,4-dione and 1-H-imidazole were prepared using imidazole aldehydes 6a–6f in ethanol as a solvent. Products 7a–7f were obtained in reasonable yields and great purity. The antioxidant activity for finish products was evaluated by DPPH radical scavenging activity and showed relatively good activity against ascorbic acid. Compounds 7d, 7e, and 7f had the highest antioxidant activity. Compound 7c showed the lowest amount of IC50 versus ascorbic acid. The antimicrobial activity of these compounds against gram-positive bacteria including Bacillus anthracis (B. anthracis) and Staphylococcus aureus (S. aureus) and gram-negative bacteria including Escherichia coli (E. coli) and Pseudomonas aeruginosa (P. aeruginosa) bacteria was evaluated by the inhibition zone diameter assay method, and the compounds showed moderate to low antibacterial activity. The toxicity properties of all synthesized compounds against cisplatin were investigated. Most of the compounds showed good activity against the positive control group, and the toxicity of compound 7b was higher than that of other compounds.
Graphic abstractAn eco-friendly method for diversity-oriented synthesis of substituted dihydropyrano[2,3-c]pyrazole and benzylpyrazolyl coumarin derivatives has been achieved via one-pot and multicomponent reaction in the presence of PdO/Al-SBA-15 as an efficient and recyclable catalyst in H2O/EtOH under reflux conditions. The significant merits of this method are wide scope, high yields of the desired products, short reaction times and simple workup procedure. In addition, this nanocatalyst was simply recovered and reused five times without significant loss in catalytic activity and also performance.
Graphical abstract