The AHA coupling of amines, haloalkane and alkynes under UV visible light was achieved with a higher yield in the presence of Au/Fe2O3. The catalyst was prepared by two methods using different gold content and then characterized by XRD, UV–vis, BET, TEM, ICP-OES and TPR spectroscopies. A comparative study of the ordinary and photocatalytic conditions, showed that the UV visible light could activate the gold nanoparticles and lead to the formation of CH2Cl? and Cl? radicals through CH2Cl2 fragmentation. The propargylamine was afforded at low temperature and a short time using 2% Au/Fe2O3. The catalyst was stable for five cycles with good photoactivity.
Graphical abstractA simple, efficient and green approach to the synthesis of 1H-pyrazolo[1,2-b]phthalazine-5,10-diones has been developed via one-pot three-component reaction of aromatic aldehyde, malononitrile and phthalhydrazide catalyzed by zinc–proline complex (Zn[L-proline]2) using H2O: PEG400?=?6: 4 as solvent. Atom economy, good to excellent yield, operational simplicity and easy workup are important features of this method.
Graphical abstractA green, highly efficient, and eco-friendly protocol for Knoevenagel–Michael addition reaction is reported in Chickpea leaf exudates (CLE) as a naturally sourced biosurfactant. The reactions between dimedone/4-hydroxycoumarins and a variety of aryl aldehydes were carried out in presence of CLE to afford diketodiols/biscoumarins. The synthetic pathway complies with several key requirements of green chemistry principles such as the employment of natural feedstock as green reaction media, ambient temperature, atom economy along with natural biosurfactant type Bronsted acids, and recyclable and biodegradable catalyst which led to a 28-fold increase in molar efficiency versus industrial standard protocols. Its dynamic phase is confirmed by the optical microscopy technique and critical micelle concentration measurement. The notable advantages of the present protocol were simple work-up procedure, high yield within short reaction time, easy separation of products, avoiding tedious column chromatography thus making the protocol environmentally friendly, sustainable, and economical.
Graphical abstractAn efficient and convenient procedure for the synthesis of novel 6-hydroxy-14-aryl-8H-dibenzo[a,i]xanthene-8,13(14H)-dione derivatives has been developed by one-pot, three-component condensation reaction between 2-hydroxynaphthalene-1,4-dione, aromatic aldehydes and 2,3-naphthalenediol in glacial acetic acid under reflux conditions. This domino reaction implies Knoevenagel condensation, Michael addition, intramolecular cyclization and dehydration. The reaction avoids tedious workup procedure due to the direct precipitation of products from the reaction medium. The notable features of this domino transformation are operational simplicity, clean reaction, easy handling, easy purification process and high yields of the products.
Graphical abstractThe triethylamine-based nanomagnetic ionic liquid, [(Et)3 N-H]FeCl4, was synthesized, and its structural and chemical characteristics were detected. The thermogravimetric analysis indicated its high thermal stability with a decomposition temperature higher than 300 °C. Additionally, [(Et)3 N-H]FeCl4 was used to efficiently catalyze the synthesis of xanthene derivatives under solvent-free conditions at 120 °C. [(Et)3 N-H]FeCl4 was recycled and reused at least five times.
Graphical abstractThe one-pot catalytic conversion of cellulose into ethylene glycol (EG) is an attractive way of biomass utilization. However, low-cost, efficient, and stable catalysts are the premise and research challenges of industrial application. Herein, the magnetic recyclable W–Ni@C catalyst was synthesized by in-situ pyrolysis of Ni-MOFs impregnated with ammonium metatungstate. Compared with the Ni-W bimetallic catalysts prepared by the impregnation method and the sol–gel method, the W–Ni@C catalyst for cellulose hydrogenolysis reaction can achieve a higher ethylene glycol yield (67.1% vs 43.3% and 42.6%) and 100% of cellulose conversion rate. The uniformly dispersed Ni nanoparticles and abundant defective WOx were formed in a reductive atmosphere generated in pyrolysis of Ni-MOFs, which was indispensable for the hydrogenolysis of cellulose into EG. Besides, the hierarchical porous carbon derived from organic ligands in Ni-MOFs reduces the mass transfer resistance while confining Ni nanoparticles and WOx to prevent their leaching, effectively enhancing the stability of the W–Ni@C catalyst. Therefore, the remarkable catalytic performance, the simple and effective recovery method as well as satisfying stability would make W–Ni@C become a promising catalyst for the conversion of cellulose to EG.
Graphical abstractAn eco-friendly method for diversity-oriented synthesis of substituted dihydropyrano[2,3-c]pyrazole and benzylpyrazolyl coumarin derivatives has been achieved via one-pot and multicomponent reaction in the presence of PdO/Al-SBA-15 as an efficient and recyclable catalyst in H2O/EtOH under reflux conditions. The significant merits of this method are wide scope, high yields of the desired products, short reaction times and simple workup procedure. In addition, this nanocatalyst was simply recovered and reused five times without significant loss in catalytic activity and also performance.
Graphical abstractA simple and efficient method for the synthesis of pyrazolopyranopyrimidines under solvent-free has been developed. The one-pot multicomponent condensation of arylaldehydes with hydrazine hydrate, ethyl acetoacetate and barbituric acid in the vicinity of a mesoporous basic nanomagnetic catalyst, namely DBU immobilized on Fe3O4@nSiO2@mSiO2 was synthesized in remarkably high yields and in short reaction times. Significantly, this catalyst can be easily separated from the reaction media by applying an external magnet, and can be reused for several cycles.
Graphical abstractHerein, a green and efficient heterogeneous and photocatalytic system for the oxidation of bisnaphthols in acetonitrile under light-emitting diode will be presented. In this reaction, aerial oxygen and H2O2 have been used as oxidant in the presence of copper ferrite nanoparticles and N-hydroxyphthalimide as an organic co-catalyst. Copper ferrite nanoparticles were magnetically separated, the efficiency of which remained nearly unchanged up to five cycles. Magnetic copper ferrite nanoparticles were synthesized by sol–gel method and characterized by XRD, FT-IR, SEM, TEM, VSM and DRS analysis. In this project, both sets of diastereomers were formed.
Graphical abstractCatalytic system for the oxidation of bisnaphthols.
In this research, a new heterogeneous catalyst is fabricated through covalent modification of iron-based metal–organic framework with ionic liquid. In more detail, using 2-aminoterephthalic acid and iron (III) chloride hexahydrate, amino-functionalized metal–organic framework has been synthesized and then reacted with 2,4,6-trichloro-1,3,5-triazine and 1,4-diazabicyclo[2.2.2]octane successively to furnish ionic liquid on metal–organic framework. The as-prepared catalyst was characterized by FTIR, TGA, BET, SEM/EDS, XRD and elemental mapping analysis and then employed for catalyzing synthesis of pyrano [2,3‐d]pyrimidines (with yields of 80–100%) from one-pot three-component reaction of aldehydes, barbituric acid and malononitrile in aqueous media. The catalytic test inferred high catalytic activity of the catalyst, superior to that of IL and metal–organic framework. Furthermore, the catalyst could be recovered and recycled for five reaction runs with preserving its morphology.
Graphic abstractd-Sorbitol-cored PAMAM dendrimer (SOR-G1) was effectively synthesized by the ring opening polymerization of epichlorohydrin. The dendrimer was characterized using different spectroscopic and analytical techniques including IR and NMR spectroscopy, TG–DTA, and GPC. Dihydropyrano[3,2-c]chromene derivatives were synthesized using SOR-G1 as a catalyst, and it was synthesized within 30 min in ethanol/water medium and excellent yield was obtained. SOR-G1 acted as a good base catalyst on the basis of amine capacity and good thermal stability. The prepared dihydropyrano[3,2-c]chromene derivatives were characterized using GCMS, LCMS, IR, 1H NMR, and 13C NMR spectra. The catalyst could be reused up to three reaction cycles without losing its catalytic activity.
Graphic abstractIn this study, the Co-based catalyst was prepared by cobalt immobilization on the surface of functionalized silica-coated magnetic NPs (Fe3O4@SiO2-CT-Co) as a magnetically core–shell nanocatalyst and characterized by FT-IR, TGA, XRD, VSM, SEM, TEM, EDX, EDX mapping, and ICP techniques and appraised in the Suzuki–Miyaura cross-coupling reaction under mild reaction conditions. The results displayed the superparamagnetic behavior of the Fe3O4 NPs core encapsulated by SiO2 shell, and the size of the particles was estimated about 30 nm. Compared with the previously reported catalysts, the engineered Fe3O4@SiO2-CT-Co catalyst provided perfect catalytic performance for the Suzuki–Miyaura cross-coupling reaction in water as a green solvent and it was much cheaper in the comparison with the traditional Pd-based catalysts. Importantly, the durability of magnetic nanocatalyst was studied and observed that it is stable under the reaction conditions and could be easily reused for at least six successive cycles without any significant decrease in its catalytic activity.
Graphic abstractIn this work, an environmentally friendly and cost-effective synthetic method of silver nanoparticles (AgNPs) and gold nanoparticles (AuNPs) was successfully performed using aqueous extract of Phlogacanthus turgidus (PT) leaves. The biosynthesis of nanoparticles was optimized for reaction conditions including concentration of metallic ions, temperature, and time using the measurement of UV–Vis spectroscopy. The nanoparticles were well characterized by analytic techniques such as Fourier-transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), high-resolution transmission electron microscope (HR-TEM), and selected area electron diffraction (SAED). The morphological data showed that PT-AgNPs possessed the spherical shape with the size distribution ranging from 5 to 15 nm with a mean size of 10 nm while PT-AuNPs existed in the multiple shape with the size distribution ranging from 5 to 20 nm with a mean size of 12 nm. The antibacterial behavior showed that PT-AgNPs possessed high bioactivity against four bacterial strains including Bacillus subtilis, Staphylococcus aureus, Salmonella typhi, and Escherichia coli. Moreover, the catalytic activity of the biogenic nanoparticles was investigated for catalytic reduction of 2-nitrophenol, 3-nitrophenol, and rhodamine B. The kinetic data showed that the nanoparticles were excellent catalysts with potential applications for environmental treatment.
Graphical abstractToday, plant extracts based on synthetic procedures have drawn consideration over conventional methods like physical and chemical procedures to synthesize nanomaterials. Green synthesis of nanomaterials has become an area of interest because of numerous advantages such as non-hazardous, economical, and feasible methods with a variety of applications in biomedicine, nanotechnology and nano-optoelectronics and as catalysts for various organic transformations. In this research, silver nanoparticles were deposited on the surface of nano-silica spheres by an in-situ reduction of Ag+ ions using an aqueous extract of Thymus kotschyanus aerial parts as a natural reducing and a capping agent. The result recorded from ultraviolet–visible (UV–Vis) spectrometer, Fourier transform infrared spectroscopy (FT-IR), thermal gravimetric analysis, scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM–EDS) and X-ray powder diffraction supports the biosynthesis and characterization of Ag/SiO2 nanoparticles. The results indicated that the average size of Ag/SiO2 nanoparticles is 25–60 nm. The Ag/SiO2 nanoparticles act as an environmentally friendly heterogeneous catalyst in the synthesis of spirooxindoles via the three-component condensation reaction of isatins, activated methylene reagents, and 1,3-dicarbonyl compounds in aqueous media, and the desired products were obtained with yields ranging from 90 to 98%. The catalyst can be recovered easily and used repetitively without significant loss of catalytic activity.
Graphical abstractHeterocyclic chemistry has fascinated the researchers owing to its wide range of applications in various chemical fields. With this perspective, herein we present an environmentally benign procedure for the synthesis of pyrazole and its derivatives through multicomponent reaction by using SPVA as a heterogeneous acid catalyst. The synthesis protocol of SPVA catalyst includes functionalization of polyvinyl alcohol by sulfonic acid groups. The synthesized SPVA catalyst was then subjected to several characterization techniques to confirm its formation and study its physicochemical properties. The SPVA catalyst was then tested for its activity toward a multicomponent reaction of aromatic aldehyde, malononitrile and phenyl hydrazine. The SPVA catalyst with sufficient acidic sites displayed appreciable catalytic performance yielding 89% of the desired pyrazole product under ambient reaction conditions. The SPVA catalyst showed recyclability up to the sixth cycle without considerable loss in its activity. Furthermore, we made an effort to demonstrate the plausible mechanistic pathway for the SPVA-catalyzed pyrazole synthesis reaction. Interestingly, the present synthetic approach could effectively produce pyrazole products with high yields in the absence of base and solvent and in short reaction time making it a green and sustainable process.
Graphic abstractLife-threatening diseases, especially those caused by pathogens and harmful ultraviolet radiation (UV-R), have triggered increasing demands for comfortable, antimicrobial, and UV-R protective clothing with a long service life. However, developing such textiles with exceptional wash durability is still challenging. Herein, we demonstrate how to fabricate wash durable multifunctional cotton textiles by growing in situ ZnO-TiO2 hybrid nanocrystals (NCs) on the surface of cellulosic fabrics. The ZnO-TiO2 hybrid NCs presented high functional efficiency, owing to their high charge transfer/separation. Ultrafine fiber surface pores, utilized as nucleating sites, endowed the uniform growth of NCs and their physical locking. The resulting fabrics presented excellent UV protection factors up to 54, displayed bactericidal efficiency of 100% against Staphylococcus aureus and Escherichia coli, and optimum self-cleaning efficacy. Moreover, the functionalized textiles exhibited robust washing durability, maintaining antibacterial and anti-UV-R efficiency even after 30 extensive washing cycles.
Graphical abstractHere, iron, sulfur and poly(ethylene glycol) doping to TiO2 nanoparticles toward the effect on photodegradation of the methylene blue (MB) and Evans blue (EB) was investigated. The present nanostructured photocatalysts displayed notable catalytic activity for the decomposition of colorants in water under visible light irradiation. The photocatalytic reaction constants of different samples were determined for EB and MB to be 0.007, 0.008, 0.009 and 0.01, 0.026, 0.021 1/min, respectively. The values of optical band gap for pure TiO2, Fe–S/TiO2, and Fe–S/TiO2@PEG were estimated to be 3.21, 2.75, and 2.81, respectively. X-ray analysis was performed and correlated with BET, Fe–SEM, and TEM results. The lattice structure was studied by W–H (Williamson–Hall) and H–W (Halder–Wagner) methods with a different assumption in the isotropic and homogenous nature. The results revealed that the SSP model shows the most accuracy and adaption to determine the lattice structure.
Graphic abstractSustainable and renewable production of platform chemicals and fuels has been gradually rising. Formic acid is one of the important chemicals for leather, cosmetic and pharmaceutical industries as well as hydrogen source. In this study, selective oxidation of biomass-derived glucose to formic acid was investigated under base free medium at 70 °C over synthesized hydrotalcite-like catalysts using hydrogen peroxide as oxidant. Effect of Mg/Al ratio (6/1, 3/1, 1/1, 1/3 and 1/6) and heat treatment (drying and calcination) on catalyst structure and product distributions; effect of calcination temperature (450, 650 and 900 °C), solvent composition (ethanol/water) and reaction temperature (30, 50 and 70 °C) on catalytic activity and product selectivity were investigated. Reducing the Mg/Al ratio enhanced the density of metal-OH bonds, surface area and uniformity of pores up to some extent. The highest glucose conversion and formic acid selectivity were achieved over Mg–Al (1:3) catalyst as 38.7 and 99.0%, respectively. The calcined catalysts (at 450 °C) exhibited 7 times higher selectivities and 4 times higher activities than the dried ones. However, higher calcination temperatures did not show remarkable increments in activities and yields. Easily prepared, cheap Mg–Al (1:3) catalyst provided promising results even at low temperature with hydrogen peroxide at atmospheric medium in a low boiling point solvent (ethanol).
Graphical abstractSeveral new derivatives of thiazolidine-2,4-dione and 1-H-imidazole were prepared using imidazole aldehydes 6a–6f in ethanol as a solvent. Products 7a–7f were obtained in reasonable yields and great purity. The antioxidant activity for finish products was evaluated by DPPH radical scavenging activity and showed relatively good activity against ascorbic acid. Compounds 7d, 7e, and 7f had the highest antioxidant activity. Compound 7c showed the lowest amount of IC50 versus ascorbic acid. The antimicrobial activity of these compounds against gram-positive bacteria including Bacillus anthracis (B. anthracis) and Staphylococcus aureus (S. aureus) and gram-negative bacteria including Escherichia coli (E. coli) and Pseudomonas aeruginosa (P. aeruginosa) bacteria was evaluated by the inhibition zone diameter assay method, and the compounds showed moderate to low antibacterial activity. The toxicity properties of all synthesized compounds against cisplatin were investigated. Most of the compounds showed good activity against the positive control group, and the toxicity of compound 7b was higher than that of other compounds.
Graphic abstractA variety of liquid energy exists in papermaking engineering and has not yet been developed and utilized. In addition, for the papermaking industry, the presence of slime can seriously affect the quality of the finished paper and can lead to paper breaking. The current slime control strategies cannot completely solve the problem and also have some low toxicity. In this study, a method of self-powered sterilization of cellulose fibers by using triboelectric pulsed direct current is reported. A liquid–solid triboelectric nanogenerator (L–S TENG) was used to convert the liquid energy of nanocellulose suspension into electrical energy and convert this electrical energy into pulsed direct current for self-powered sterilization of cellulose fiber. A hydrophobic coating material is used as solid triboelectric material and electrode for sterilization. Driven by L–S TENG, the electrodes exhibited an excellent sterilization rate against four microorganisms including Escherichia coli, Aspergillus niger, Candida albicans, and Klebsiella pneumoniae, which from slime in the papermaking industry. This study could provide a basic research theory for liquid energy harvesting in the papermaking industry, and also provide a new strategy for pulp sterilization.
Graphical abstract