Catalytic synthesis of diphenolic acid from levulinic acid over cesium partly substituted Wells–Dawson type heteropolyacid

A series of insoluble cesium partly substituted Wells–Dawson type heteropolyacids, Cs_xH_6−xP₂W₁₈O₆₂ (x = 1.5–6.0), were synthesized and characterized using the techniques including UV–vis/DRS, FT-IR, XRD, XPS, and N₂ porosimetry. As the unique and reusable solid acid catalysts, Cs_xH_6−xP₂W₁₈O₆₂ salts were applied to produce diphenolic acid by the condensation reaction of phenol with bio-platform molecule, levulinic acid. For comparison, cesium partly substituted Keggin type heteropolyacids (Cs_xH_3−xPW₁₂O₄₀, x = 1.0–3.0), HCl, HZSM-5, and MCM-49 were also tested. Influences on the catalytic activity and selectivity were considered for factors including solvent, molar ratio of phenol to levulinic acid, amount of catalyst, reaction temperature, stirring speed, and reaction time. The experimental results demonstrated that both Cs_1.5H_4.5P₂W₁₈O₆₂and Cs_2.5H_0.5PW₁₂O₄₀ exhibited excellent catalytic performance under solvent-free conditions. Furthermore, both selectivity and activity of Cs_1.5H_4.5P₂W₁₈O₆₂ were higher than those of Cs_2.5H_0.5PW₁₂O₄₀. Reasons for the different catalytic behaviors between two types of cesium partly substituted heteropolyacids were investigated.     

Catalytic oxidative carboncarbon bond cleavage of ketones with dioxygen: assessment of some metal complexes. Some alternatives for preparing α, ω-dicarboxylic acids

This account considers the catalytic oxidative cleavage of ketones with dioxygen. It can be brought about by Keggin-type heteropolyanion complexes containing molybdenum and vanadium as well as by several transition metal catalysts (V(IV, V), Cu(I, II), Fe(III), Ce(IV), etc.), instead of using stoichiometric oxidation with periodate, lead tetra-acetate, etc. Benzylic ketones, ArCH₂C(O)R are oxidised to ArCHO and the corresponding carboxylic acid in high yield at room temperature by dioxygen in the presence of Cu(II) or heteropolyacids H_3+n[PMo_12−nV_nO₄₀]_aq. Although some oxovanadium complexes will induce such oxidations, the heteropolyacids are better, probably due in part to their Brønsted acidity and ability to take part in a variety of equilibria. Treatment of substituted cycloalkanones with a catalytic amount of ‘H₅[PMo₁₀V₂O₄₀]·n H₂O’ (or Cu(II) complexes) under an O₂ atmosphere gives keto-acids in good yield. The selectivities observed at high conversions with various ketones and diols, coupled with the mild conditions and inexpensive oxidant, would seem to make these methods attractive for use in fine chemical manufacture. The scope of these complexes as selective oxidation catalysts can be further extended by associating several metal ions. Such catalysts are being developed for organic synthesis at both the laboratory and industrial scale. Alternative routes to adipic acid involving cyclohexanone, cyclohexene, cyclohexane, etc. and polyoxo(peroxo)metalates or redox molecular sieves as liquid-phase oxidation catalysts, are compared. Alternatives, both biochemical and chemical, are being sought.     

Comparison of H3PW12O40 and H4SiW12O40 heteropolyacids supported on silica by H MAS NMR

The H₃PW₁₂O₄₀ and H₄SiW₁₂O₄₀ heteropolyacids supported on silica were studied by ¹H MAS NMR as a function of both the coverage and the dehydroxylation temperature. The signal at ca. 8 ppm attributed to the highly acidic protons of the anhydrous form of the heteropolyacid was never observed in the case of the phosphotungstic polyanion supported on silica while it was clearly present in the case of the silicotungstic species. These results explain the different activities of the two supported heteropolyacids in acid reactions involving strong acid sites. To cite this article: A. Thomas et al., C. R. Chimie 8 (2005).     

Heteropolyacid as an Efficient Catalyst for Synthesis of 3,4-Dihydro-1H-2,3-benzothiazine-2,2-dioxides

A facile and efficient method for the formation of 3,4-dihydro-1H-2,3-benzothiazine 2,2-dioxides 2, compounds from benzylsulfonamides and formaldehyde is described using heteropolyacids H₃PW₁₂O₄₀ and H₃PMo₁₂O₄₀ supported on silica as catalysts.     

Catalytic Performance of Divanadium-Substituted Molybdophosphate Acid,H5PMo10V2O40, in Liquid-Phase Esterification of Hexanoic Acid

Divanadium-substituted molybdophosphate acid, H₅PMo₁₀V₂O₄₀, efficiently catalyzes the synthesis of ethylhexanoate from hexanoic acid and ethanol at reflux temperature and under solventless conditions. Comparison of H₅PMo₁₀V₂O₄₀ with the other heteropolyacids showed that this catalyst gives the highest total yield of ethylhexanoate. The effects of the molar ratio of acid:alcohol, reaction times, and temperatures were studied.     

Hydrogenolysis of glycerol to propanediols over heteropolyacids promoted AgCu/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalysts

Various amounts and different types of heteropolyacids promoted 5Ag15Cu/Al₂O₃ catalysts were prepared by impregnation method and analyzed through many techniques. The synthesized catalysts were evaluated for hydrogenolysis of glycerol to propanediols. The results demonstrated that heteropolyacids loading facilitated the reduction, promoted the dispersion, enhanced the acidity, and increased Broensted acid sites of the AgCu catalysts, which benefited the generation of 1,3-propanediol. Compared with phosphotungstic acid and phosphomolybdic acid, silicotungstic acid promoted AgCu catalyst had a better performance for 1,3-propanediol due to the better Cu dispersion and higher Broensted acidity. In addition, when the reaction was performed at 220 °C under 3.5 MPa for 8 h, the chosen 5Ag15Cu-10HSiW/Al₂O₃ achieved a 69.6% glycerol conversion with 35.6% 1,2-propanediol selectivity and 21.5% 1,3-propanediol selectivity.     

FT-IR and microbalance studies of diammonium ions formation in heteropolyacids

The sorption of gaseous ammonia into solid polyoxometalates such as the Keggin (H₄SiMo₁₂O₄₀, H₄SiW₁₂O₄₀ and H₃PW₁₂O₄₀) and Dawson type (H₆P₂W₁₈O₆₂) heteropolyacids was studied. The combination of microbalance measurements and FT-IR spectroscopy confirmed the formation of diammonium ion N₂H₇⁺ in the bulk of heteropolyacids of both types, which was found to depend on both the ammonia equilibrium pressure and sorption temperature. The diffusion coefficients of the ammonia molecules penetrating into the bulk of heteropolyacids were calculated.     

2‐Methyl‐1,3‐disulfoimidazolium polyoxometalate hybrid catalytic systems as equivalent safer alternatives to concentrated sulfuric acid in nitration of aromatic compounds

Ionic liquid‐derived polyoxometalate salts [mdsim]₃[PM₁₂O₄₀] (where M = W and Mo) of two heteropolyacids H₃PW₁₂O₄₀.nH₂O and H₃PMo₁₂O₄₀.nH₂O were synthesized using 2‐methyl‐1,3‐disulfoimidazolium chloride ([mdsim][Cl]) ionic liquid and the corresponding heteropolyacids. Three equivalents of [mdsim][Cl] were treated with the respective Keggin‐structured heteropolyacids (one equivalent) in aqueous medium at room temperature to afford the water‐stable ionic polyoxometalates as acidic solids. They were completely characterized using spectroscopic and other analytical techniques including thermal analysis and Hammett acidity studies. The inherent Brønsted acidic properties of ─SO₃H group of these polyoxometalate salts were studied for the nitration of aromatic compounds with 69% HNO₃ at normal temperature and 80°C without use of any external concentrated sulfuric acid. These strongly acidic polyoxometalates display good recyclability and efficient reusability.     

Enhanced Electrochemical Response of Isoniazid Electrocatalytic Oxidation on RGO-PPD-SiW Modified Electrode

The electroactive composites based on reduced graphene oxide (RGO), poly-o-phenylenediamine (PPD) and heteropolyacids – H₄SiW₁₂O₄₀nH₂O (SiW) and H₃[PW₁₂O₄₀] ⋅ nH₂O (PW) was applied to a screen-printed carbon electrode (SPCE) as a planar three-electrode cell as the first step to creating various devices, in particular, sensors and catalysts. We studied potential use of the modified and unmodified SPCE planar electrode in determining the concentration of antitubercular antibiotic isoniazid (isonicotinic acid hydrazide C₆H₇N₃O or INH). The best result was observed for SPCE+RGO-PPD-SiW. CV of normal saline with various concentrations of C₆H₇N₃O demonstrated linear dependence of the relevant anodic peak current either in the bulk solution upon immersion of the modified electrode or in a droplet on the electrode surface.     

Dehydrogenation activity and structure of polyaniline supported heteropolyacid catalysts

Polyaniline(PAN) supported H₆P₂W₁₈O₆₂(PW) , H₃PMo₁₂O₄₀ (PMo) and H₄PMo₁₁VO₄₀(PMoV) catalysts were prepared and their activities for hexanol conversion were tested. IR, XRD, ICP and SEM measurements proved that the heteropolyacids (HPA) could be supported on this type of polymer. The PAN supported HPA catalysts exhibit higher redox activities and low acid-base activities for the hexanol conversion. The redox activities increase with increasing amount of the heteropolyacid. Substitution of Mo ion by V ion results in an increase of redox activities of the catalysts. This revised version was published online in June 2006 with corrections to the Cover Date.     

Heteropolyacids as new catalysts of the Ritter reaction

Some nitriles reacted with camphene in the presence of heteropolyacids (H₃PW₁₂O₄₀, H₄SiW₁₂O₄₀, H₇PMo₁₂O₄₀) as catalyst to give N-(1,7,7-trimethylbicyclo[2.2.1]hept-2-yl)-substituted amides in fairly high yields.     

Boehmite nano‐particles functionalized with silylpropylamine‐supported Keggin‐type heteropolyacids: Catalysts for epoxidation of alkenes

Boehmite nano‐particles with a high degree of surface hydroxyl groups were covalently functionalized by 3‐(trimethoxysilyl)‐propylamine to support H₃[PMo₁₂O₄₀], H₃[PW₁₂O₄₀], H₄[SiMo₁₂O₄₀] and H₄[SiW₁₂O₄₀] Keggin‐type heteropolyacids. After characterization of these catalysts by FT‐IR, powder X‐ray diffraction, TG/differential thermal analysis, CHN, inductively coupled plasma and transmission electron microscopy techniques, they were applied to the epoxidation of cis‐cycloocten. The progress of the reactions was investigated by gas–liquid chromatography, and the catalytic procedures were optimized for the parameters involved, such as the solvent and oxidant. The results showed that 25 mg of supported H₃[PMo₁₂O₄₀] catalyst in 1 ml C₂H₄Cl₂ with 0.5 mmol cyclooctene and 1 mmol tert‐butylhydroperoxide at reflux temperature gave 98% yield over 15 min. Recycling experiments revealed that these nanocatalysts could be repeatedly applied up to five times for a nearly complete epoxidation of cis‐cycloocten. The optimized experimental conditions were also used successfully for the epoxidation of some other alkenes, such as cyclohexene, styrene and α‐methyl styrene.     

Keggin-type H4PVMo11O40-based catalysts for the isobutane selective oxidation

Cesium heteropolysalts Cs₃PMo₁₂O₄₀ and HCs₃PVMo₁₁O₄₀ were synthesized by modifying the preparation conditions in order to get materials with a much higher surface area than the original Keggin-type heteropolyacids (H₃PMo₁₂O₄₀ and H₄PVMo₁₁O₄₀). These solids were used as carriers for the dispersion of H₄PVMo₁₁O₄₀ heteropolyacid by the incipient wetness impregnation technique. The textural and structural properties of supports and catalysts were examined by scanning electron microscopy, N₂ adsorption-desorption isotherms and Raman spectroscopy. The supported catalysts were studied before and after red/ox pretreatments by X-ray photoelectron spectroscopy, which showed that both the surface composition and oxidized to reduced species ratio depend on the used carrier. The catalytic performances of these novel supported catalysts in the selective oxidation of isobutane to methacrylic acid and methacrolein were studied. The best catalytic properties were obtained when H₄PVMo₁₁O₄₀ was supported on HCs₃PVMo₁₁O₄₀. The isobutane conversion and yield of the desired oxygenates increased along the unsupported H₄PVMo₁₁O₄₀ < H₄PVMo₁₁O₄₀/Cs₃PMo₁₂O₄₀ < H₄PVMo₁₁O₄₀/HCs₃PVMo₁₁O₄₀ series.

     

Microwave-promoted efficient conversion of acetophenones to 1,3,5-triarylbenzenes catalyzed by H3PW12O40 and nano-silica supported H3PW12O40 as reusable catalysts

H₃PW₁₂O₄₀ and nano-silica supported H₃PW₁₂O₄₀ were found to be efficient heterogeneous catalysts for the preparation of 1,3,5-triarylbenzenes via triple self condensation of acetophenones under microwave irradiation and solvent-free conditions. High yields, short reaction times, easy work-up, easy availability and handling, eco-friendly and reusability of the catalysts are the main aspects of the present method. The catalytic mechanism of 1,3,5-triarylbenzenes synthesis is also proposed.     

Ag2Cr2O7 nanoparticles: An eco-friendly and reusable catalyst for synthesis of pyrano[c]chromenediones and [1,3]dioxolo[g]chromeneones in aqueous media at ambient temperature

An efficient and green protocol for the synthesis of 4-aryl-3,4-dihydro-2H,5H-pyrano[3,2-c]chromene-2,5-diones and 8-aryl-7,8-dihydro-6H-[1,3]dioxolo[4,5-g]chromene-6-ones through the Ag₂Cr₂O₇ nanoparticles catalyzed cyclocondensation reaction of active methylene compounds including 4-hydroxycoumarin or 3,4-methylenedioxyphenol, aromatic aldehydes, and meldrum's acid in water at ambient temperature was described. This method demonstrates several advantages compared with methods that are currently employed such as a mild reaction conditions, simple work-up, good to excellent yields, avoiding toxic catalyst and hazardous solvent, and recovery and reuse of the catalyst.     

MnxOy/NC and CoxOy/NC Nanoparticles Embedded in a Nitrogen‐Doped Carbon Matrix for High‐Performance Bifunctional Oxygen Electrodes

Reversible interconversion of water into H₂ and O₂, and the recombination of H₂ and O₂ to H₂O thereby harnessing the energy of the reaction provides a completely green cycle for sustainable energy conversion and storage. The realization of this goal is however hampered by the lack of efficient catalysts for water splitting and oxygen reduction. We report exceptionally active bifunctional catalysts for oxygen electrodes comprising Mn₃O₄ and Co₃O₄ nanoparticles embedded in nitrogen‐doped carbon, obtained by selective pyrolysis and subsequent mild calcination of manganese and cobalt N₄ macrocyclic complexes. Intimate interaction was observed between the metals and nitrogen suggesting residual M–N_x coordination in the catalysts. The catalysts afford remarkably lower reversible overpotentials in KOH (0.1 M ) than those for RuO₂, IrO₂, Pt, NiO, Mn₃O₄, and Co₃O₄, thus placing them among the best non‐precious‐metal catalysts for reversible oxygen electrodes reported to date.     

烷基膦酸促进负载磷钨酸催化异丁烷/丁烯烷基化反应

异丁烷/丁烯烷基化是生产高辛烷值汽油的重要反应,目前主要采用液体强酸为催化剂,而固体催化剂用于该反应的性能均不理想。我们设计合成出十六烷基膦酸(HDPA)修饰的氧化硅负载型磷钨酸纳米多级结构催化剂(HDPA-HPW/SiO2),其结构与悬铃木果实相似。通过X射线衍射(XRD)、傅里叶变换红外光谱(FT-IR)、透射电子显微镜镜(TEM)、氮气吸附-脱附、异丁烷吸附-脱附等对该催化剂进行了表征,并使用固定床微型反应器评价了其对异丁烷/丁烯烷基化反应的催化性能。结果表明,HDPA的外围修饰增强了催化剂对烃类反应物的吸附,减少了烯烃聚合副反应和催化剂表面积碳的产生,提高了高辛烷值产物的选择性,延长了催化剂的寿命。     

Catalytic Performance of Re/Ga2O3/WO3/ZrO2 Catalyst for n-Hexane Isomerization

A series of Re/Ga₂O₃/WO₃/ZrO₂ catalysts were prepared by the impregnation method. The crystalline structure, redox, and acid site distribution of the catalysts were characterized by X-ray powder diffraction, temperature-programmed reduction of H₂, and temperature-programmed desorption of NH₃. Their catalytic performance for n-hexane isomerization was studied. The results showed that the addition of Re greatly affected the redox properties and the acid site distribution of the catalysts. Owing to the presence of Re, n-hexane isomerization was catalyzed by metal and acid sites, and thus the conversion of n-hexane and the selectivity for 2,2-dimethylbutane were significantly increased. Under the conditions of 195 °C, 1.0 MPa, LHSV = 1.0 h⁻¹, and n(H₂)/n(C₆) = 2.0, the conversion of n-hexane over 1.0%Re/1.0%Ga₂O₃/WO₃/ZrO₂ is 84.8%, and the selectivities for 2,2-dimethylbutane, i-hexane, and cracking products (C_5-) are 20%, 97.7%, and 2.1%, respectively. The catalyst is stable during 150 h operation.     

Synthesis and physicochemical properties of Zr-MCM-41 mesoporous molecular sieves and Pt/H3PW12O40/Zr-MCM-41 catalysts

For the first time, modifications of the surface and framework of Si-MCM-41 by depositing a heteropolyacid on the surface and by introducing foreign Zr⁴⁺ ions into the framework are investigated. The Zr-modified Si-MCM-41 mesoporous materials (hereafter referred as WSZn, n=Si/Zr=25, 15, 8, 4) were synthesized through a surfactant-templated preparation approach, using low-cost fumed silica as the Si precursor. After impregnation with 25 wt% of H₃PW₁₂O₄₀, the surface Brönsted acidity of the Pt/H₃PW₁₂O₄₀/WSZn catalysts was greatly enhanced by 2-10 times relative to the bare WSZn support. Two kinds of supported heteropolyacids were formed: (i) bulk-like heteropolyacid crystals with unchanged Keggin structures, and (ii) highly dispersed heteropolyacid with distorted Keggin units. The formation of various kinds of heteropolyacid structures is closely related to the interaction between the heteropolyanions and the hydroxyl groups in the host support.     

Synthesis of N-substituted amides by the Ritter reaction with heteropoly acids as catalysts

Reactions of a number of nitriles with camphene in the presence of the heteropoly acids H₃PW₁₂O₄₀, H₇PMo₁₂O₄₂, and H₄SiW₁₂O₄₀ as catalysts were studied. In all cases, N-substituted amides were obtained in sufficiently high yields. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 374–376, February, 2006.