Noble metal-free catalysts for oxygen reduction reaction

Developing noble metal-free catalysts with low cost, high performance and stability for oxygen reduction reaction(ORR) in fuel cells is of great interest to promote sustainable energy devices. In this review, we summarized noble metal-free catalysts for ORR,including non-noble metal-based and heteroatom-doped carbon nanomaterials. Mesoporous structure, homogeneous distribution of nanocrystals and synergistic effect of carbon base and nanocrystals/doped heteroatoms have great effect on the ORR property.The noble metal-free nanomaterials showed comparable catalytic property, better stability and methanol tolerance than commercial platinum(Pt)-based catalysts, showing great potential as substitutes for noble metal-based catalysts. In addition, the challenges and chances of developing noble metal-free ORR catalysts are also discussed.     

Copolymer-Induced Intermolecular Charge Transfer: Enhancing the Activity of Metal-Free Catalysts for Oxygen Reduction

Breaking the electroneutrality of sp² carbon lattice is a viable way for nanocarbon material to modulate the charge delocalization and to further alter the electrocatalytic activity. Positive charge spreadsheeting is preferable for catalyzing the oxygen reduction reaction (ORR) and other electrochemical reactions. Analogously to the case of intramolecular charge transfer by heteroatom doping, electrons in the conjugated carbon lattice can be redistributed by the intermolecular charge transfer from the nanocarbon material to the polyelectrolyte. A copolymeric electrolyte, epichlorohydrin-dimethylamine copolymer (EDC) was synthesized. The EDC-modified carbon nanotube (CNT) hybrid was subsequently fabricated by sonication treatment and served as a metal-free carbonaceous electrocatalyst with remarkable catalytic activity and stability. The resultant hybrid presents positive charge spreadsheeting on CNT as a result of the interfacial electron transfer from CNT to EDC. DFT calculations were further carried out to reveal that the enhancement of the wrapped EDC polyelectrolyte originates from the synergetic effect of the quaternary ammonium-hydroxyl covalently bonded structure. The CNT-EDC hybrid not only provides an atomically precise regulation to modulate nanocarbon materials from inactive carbonaceous materials into efficient metal-free catalysts, but it also opens new avenues to develop metal-free catalysts with well-defined and highly active sites.     

Carbon-Based Electrocatalysts for Acidic Oxygen Reduction Reaction

Oxygen reduction reaction (ORR) is vital for clean and renewable energy technologies, which require no fossil fuel but catalysts. Platinum (Pt) is the best-known catalyst for ORR. However, its high cost and scarcity have severely hindered renewable energy devices (e.g., fuel cells) for large-scale applications. Recent breakthroughs in carbon-based metal-free electrochemical catalysts (C-MFECs) show great potential for earth-abundant carbon materials as low-cost metal-free electrocatalysts towards ORR in acidic media. This article provides a focused, but critical review on C-MFECs for ORR in acidic media with an emphasis on advances in the structure design and synthesis, fundamental understanding of the structure-property relationship and electrocatalytic mechanisms, and their applications in proton exchange membrane fuel cells. Current challenges and future perspectives in this emerging field are also discussed.     

A Nitrogen,Sulfur co-Doped Porphyrin-based Covalent Organic Framework as an Efficient Catalyst for Oxygen Reduction

Oxygen reduction reaction(ORR) is a significant reaction for energy conversion systems(such as fuel cells, metal-air batteries, etc.). It is an urgent need to develop cheap, durable and highly-active catalysts for efficient ORR. Hence, we report a metal-free nitrogen and sulfur co-doped porphyrin-based covalent organic framework(COF) as a high-efficiency ORR catalyst[the onset potential(E_o) is 0.79 V and the half-wave potential(E_1/2) is 0.70 V]. The double doping of N and S atoms causes uneven charge distribution around carbon atoms, which can act as catalytic active centers, improving ORR activity. Compared with single-atom doping, double atoms doping exhibits a higher activity due to the synergistic effect between different elements. These results demonstrate that reasonable design of stable metal-free COFs with a high electrochemical activity can promote their wide applications.     

聚苯胺衍生Fe-N-C催化剂在碱性电解质中对氧还原反应的催化性能

经过热解聚苯胺、碳和FeCl₃的混合物制备的Fe-N-C材料在酸性电解质中对氧还原反应表现出高的催化活性;由于材料中不存在任何贵金属, 因而被认为是一类新型非贵金属氧还原催化剂. 然而这类催化剂在碱性电解质中催化氧还原反应的性能如何尚不清楚. 本文使用旋转圆盘电极技术考察了制备的两个Fe-N-C催化剂在KOH水溶液中催化氧还原反应性能, 发现这两个催化剂表现出比无金属的N掺杂碳材料更高的活性. 与商业Pt/C催化剂相比, 它们催化氧还原反应的起始电势和半波电势分别仅低60和40 mV左右, 计时电流测试表明, 它们比Pt/C催化剂显示出更好的稳定性. 此外, 在这两个Fe-N-C催化剂上的氧还原反应主要遵循四电子途径. 本工作显示, Fe-N-C材料有望用于碱性燃料电池氧还原反应催化剂.     

杂原子掺碳材料氧还原催化剂研究进展

开发替代Pt类高活性、低成本的非贵金属燃料电池阴极氧还原催化剂是实现燃料电池商业化的必由之路. 研发催化活性高,稳定性好,价格便宜的非贵金属催化剂是当务之急. 碳纳米材料,尤其杂原子掺杂的碳纳米材料有其独特的结构和催化性能而备受瞩目. 本文结合作者课题组的研究工作,综述了近年杂原子掺杂碳纳米材料催化剂燃料电池阴极氧电催化还原方面的研究进展.     

燃料电池非铂基氧还原电催化剂的最新研究进展

目前,燃料电池中广泛使用的Pt基阴极催化剂价格昂贵、资源缺乏,且易中毒,故急需开发廉价、耐用、高效和高耐醇的非铂基阴极氧还原催化剂. 本文阐述了国内外在非铂氧还原催化剂方面的研究,并着重介绍了作者课题组的最新研究进展. 主要集中在非贵金属（Fe）负载和杂原子（F）掺杂的非金属催化剂,力求原料廉价并可提高催化剂的催化活性、稳定性、抗毒化能力,实现较高的性价比. 同时通过理论计算解释了氟单掺杂和氮氟共掺杂高效性的根源,为设计高效催化剂提供了有力的理论支持.     

Understanding the Catalytic Sites of Metal–Nitrogen–Carbon Oxygen Reduction Electrocatalysts

The development of low-cost catalysts containing earth-abundant elements as alternatives to Pt-based catalysts for the oxygen reduction reaction (ORR) is crucial for the large-scale commercial application of proton exchange membrane fuel cells (PEMFCs). Nonprecious metal–nitrogen–carbon (M-N-C) materials represent the most promising candidates to replace Pt-based catalysts for PEMFCs applications. However, the high-temperature pyrolysis process for the preparation of M-N-C catalysts frequently leads to high structural heterogeneity, that is, the coexistence of various metal-containing sites and N-doped carbon structures. Unfortunately, this impedes the identification of the predominant catalytic active structure, and thus, the further development of highly efficient M-N-C catalysts for the ORR. This Minireview, after a brief introduction to the development of M-N-C ORR catalysts, focuses on the commonly accepted views of predominant catalytic active structures in M-N-C catalysts, including atomically dispersed metal–N_x sites, metal nanoparticles encapsulated with nitrogen-doped carbon structures, synergistic action between metal–N_x sites and encapsulated metal nanoparticles, and metal-free nitrogen-doped carbon structures.     

Ordered mesoporous carbon nitrides with graphitic frameworks as metal-free, highly durable, methanol-tolerant oxygen reduction catalysts in an acidic medium

Developments of high-performance cost-effective electrocatalyts that can replace Pt catalysts have been a central theme in polymer electrolyte membrane fuel cells (PEMFCs) and direct methanol fuel cells (DMFCs). In this direction, nitrogen-doped carbon nanostructures free of metallic components have attracted particular attention. Here we show that directing graphitic carbon nitride frameworks into mesoporous architecture can generate a highly promising metal-free electrocatalyst for an oxygen reduction reaction (ORR) in an acidic medium. The ordered mesoporous carbon nitride (OMCN) was synthesized with a nanocasting strategy using ordered mesoporous silica as a template. A variety of characterizations revealed that the OMCN is constructed with graphitic carbon nitride frameworks and ordered arrays of uniform mesopores. The OMCN showed significantly enhanced electrocatalytic activity for ORR compared to bulk carbon nitride and ordered mesoporous carbon in terms of the current density and onset potential. A high surface area and an increased density of catalytically active nitrogen groups in the OMCN appear to contribute concomitantly to the enhanced performance of the OMCN. Furthermore, the OMCN exhibited superior durability and methanol tolerance to a Pt/C catalyst, suggesting its widespread utilization as an electrocatalyst for PEMFCs and DMFCs.     

Enhanced oxygen reduction at Pd catalytic nanoparticles dispersed onto heteropolytungstate-assembled poly(diallyldimethylammonium)-functionalized carbon nanotubes

Both Keggin-type phosphotungstic acid (HPW) and Pd are not prominent catalysts towards the oxygen reduction (ORR), but their composite Pd-HPW catalyst produces a significantly higher electrochemical activity for the ORR in acidic media. The novel composite catalyst was synthesized by self-assembly of HPW on multi-walled carbon nanotubes (MWCNTs) via the electrostatic attraction between negatively charged HPW and positively charged poly(diallyldimethylammonium (PDDA)-wrapped MWCNTs, followed by dispersion of Pd nanoparticles onto the HPW-PDDA-MWCNT assembly. The as-prepared catalyst was characterized by transmission electron microscopy (TEM), Fourier transform infrared (FTIR) spectroscopy, thermal gravimetric analysis (TGA), Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS). TEM images show that Pd nanoparticles were uniformly dispersed on the surface of MWCNTs even when the Pd loading was increased to 60 wt%. Electrochemical activity of the catalysts for the ORR was evaluated by steady state polarization measurements using a rotating disk electrode. Compared with the acid treated MWCNTs, Pd nanoparticles supported on the HPW-assembled MWCNTs show a much higher ORR activity that is comparable to conventional Pt/C catalysts. The high electrocatalytic activities could be related to high dispersion of Pd nanoparticles as well as synergistic effects originating from the high proton conductivity of HPW. The Pd/HPW-PDDA-MWCNTs system as the cathode catalyst in proton exchange membrane fuel cells is demonstrated.     

Designing Thiophene-Enriched Fully Conjugated 3D Covalent Organic Framework as Metal-Free Oxygen Reduction Catalyst for Hydrogen Fuel Cells

The application of three-dimensional (3D) covalent organic frameworks (COFs) in renewable energy fields is greatly limited due to their non-conjugated skeletons. Here, we design and successfully synthesize a thiophene-enriched fully conjugated 3D COF (BUCT-COF-11) through an all-thiophene-linked saddle-shaped building block (COThTh-CHO). The BUCT-COF-11 exhibits excellent semiconducting property with intrinsic metal-free oxygen reduction reaction (ORR) activity. Using the COF as cathode catalyst, the assembled anion-exchange membrane fuel cells (AEMFCs) exhibited a high peak power density up to 493 mW cm⁻². DFT calculations reveal that thiophene introduction in the COF not only improves the conductivity but also optimizes the electronic structure of the sample, which therefore boosts the ORR performance. This is the first report on the application of COFs as metal-free catalysts in fuel cells, demonstrating the great potential of fully conjugated 3D COFs as promising semiconductors in energy fields.     

N,P-co-Doped Graphdiyne as Efficient Metal-free Catalysts for Oxygen Reduction Reaction

The carbon-based metal-free catalyst is one of the ideal alternatives to Pt as electrocatalysts for oxygen reduction reaction,which can reduce the cost of fuel cells and zinc-air batteries.Here,graphdiyne(GDY),a carbon material with uneven charge distribution,was used as substrate.By doping nitrogen and phosphorus,a N-P-GDY catalyst was prepared,which further regulated the electron structure of GDY.The sheet-like morphology of GDY was preserved in N-P-GDY.The N and P were distributed uniformly in the catalyst,whereas defects and active sites were created by doping N and P,as demonstrated by the element mapping images and Raman spectra.X-Ray photoelectron spectroscopy results indicated N and P existed in many forms in N-P-GDY.The N-P-GDY exhibited higher activity for ORR than only N or P doped GDY,due to the synergistic effect of N and P in N-P-GDY.Moreover,the activity of N-P-GDY changed little after a long time cyclic voltammetry test or injecting methanol in the electrolyte.Besides,the four electrons transfer reaction to produce water was the main process for ORR on N-P-GDY catalysts.     

Recent advances in carbon-based electrocatalysts for oxygen reduction reaction

Fuel cells are one of the most promising clean energy devices to substitute for fossil fuel in the future to alleviate energy crisis and environmental pollution.As the key reaction on the cathode in the fuel cells,oxygen reduction reaction(ORR)still requires efficient noble metal catalysts such as the comme rcial Pt/C to boost the reaction for its sluggish kinetics.Therefore,it is critical to design earth-abundant carbonbased catalysts with high efficiency and long-term stability to replace the noble metal-based catalysts.This review focuses on the recent progress about carbon-based ORR catalysts including non-metal doped carbon materials,transition metal-nitrogen-carbon species,transition metal carbides/carbon,single atom catalysts,and other carbon hybrids.And we further infer that the excellent ORR performances can be achieved by the balance of geometric and electronic structures of catalysts such as conductivity,surface area,hierarchical porous structure,defect and doping effect.Additionally,the perspective development trend is also proposed to guide the rational designation of carbon-based catalysts for ORR and even extend to other energy storage and conversion fields in the future.     

Recent Progress in ZIF-Derived Carbons for Enhanced Oxygen Reduction Reaction Electrocatalysis

The oxygen reduction reaction (ORR) represents a cornerstone for many clean energy conversion technologies such as fuel cells and metal-air batteries. Nevertheless, the commercialization of these technologies is largely impeded by the slow kinetics of ORR, for which active, durable and cost-effective ORR catalysts are needed. In recent years, zeolitic imidazolate framework (ZIF) derived carbon materials emerge as a new class of non-precious metal catalysts (NPMCs) toward ORR, largely benefiting from their high surface area, abundant porosity, tunable chemical/electronic structure, and superior ORR activity which is comparable or even surpasses those state-of-the-art Pt-based ORR catalysts. This review offers a comprehensive overview of the recent advances in ZIF-derived carbons for ORR. The synthesis strategies and the key factors affecting the ORR performance of ZIF-derived carbon materials are discussed. Future research directions and perspectives on exploring ZIF derived carbons as efficient ORR catalysts are highlighted, with a focus on the principles of rationally engineering the coordination structures of active sites.     

A Layer-Structured Metal-Organic Framework-Derived Mesoporous Carbon for Efficient Oxygen Reduction Reaction

Developing highly active and durable electrocatalysts for the oxygen reduction reaction (ORR) is crucial to large-scale commercialization of fuel cells and metal-air batteries. Here we report a facile approach for the synthesis of nitrogen and oxygen dual-doped mesoporous layer-structured carbon electrocatalyst embedded with graphitic carbon coated cobalt nanoparticles by direct pyrolysis of a layer-structured metal-organic framework. The electrocatalyst prepared at 800℃ exhibits comparable ORR performance to Pt/C catalysts but possesses superior stability to Pt/C catalysts. This synthetic approach provides new prospects in developing sustainable carbon-based electrocatalysts for electrochemical energy conversion devices.     

The influence of the type of N dopping on the performance of bifunctional N-doped ordered mesoporous carbon electrocatalysts in oxygen reduction and evolution reaction

To develop more ideal bifunctional heteroatom-doped carbon electrocatalysts toward the oxygen reduction reaction(ORR) and oxygen evolution reaction(OER) for regenerative fuel cells and rechargeable metal–air batteries, herein, tobacco-derived N-containing ordered mesoporous carbon(N-OMC) electrocatalysts with different N species distributions are designed. Results indicate that the as-prepared N-OMC with more pyrrolic and pyridinic Ns exhibits much higher activities for the ORR and OER than N-OMC with more graphitic N in both acidic and alkaline media, suggesting that the increase of pyrrolic and pyridinic Ns favors the improvement of ORR and OER activities of the N-containing carbon catalysts, and showing a great potential for the designing of more effective, lower-cost ORR and OER bifunctional electrocatalysts for future regenerative fuel cells and rechargeable metal–air batteries.     

Efficient metal-free oxygen reduction in alkaline medium on high-surface-area mesoporous nitrogen-doped carbons made from ionic liquids and nucleobases

Mesoporous nitrogen-doped carbon materials with high surface areas up to 1500 m(2) g(-1) were conveniently made by the carbonization of nucleobases dissolved in an all-organic ionic liquid (1-ethyl-3-methylimidazolium dicyanamide). Using hard templating with silica nanoparticles, this process yields high-surface-area nitrogen-doped carbon materials with nitrogen contents as high as 12 wt %, narrow mesopore size distribution of ca. 12 nm diameter, and local graphitic carbon structure. It is demonstrated that the resulting nitrogen-doped carbons show very high catalytic activity, even in the metal-free case in the oxygen reduction reaction (ORR) for fuel cells. Specifically, the as-prepared materials exhibit a low onset voltage for ORR in alkaline medium and a high methanol tolerance, compared with those of commercial 20 wt % Pt/C catalyst. We regard this as a first step toward an all-sustainable fuel cell, avoiding noble metals.     

通过铁掺杂和造孔提高氮掺杂石墨烯/碳纳米管复合物电催化氧还原性能的研究（英文）

氧还原反应催化剂的性能直接影响着能源转换和存储器件如燃料电池和金属-空气电池的性能. 开发低成本、高性能的非铂族金属氧还原催化剂对于这类器件的实际应用和商业化十分重要,因此备受关注. 氮掺杂的石墨烯/碳纳米管复合物同时具备碳纳米管的良好导电性能和有利于传质的三维网络结构优点,以及氮掺杂石墨烯的高活性优点,因此有望发展为这类可替代铂族催化剂的氧还原电催化剂之一,但目前其催化性能还需进一步提高. 本文研究发现通过在氮掺杂石墨烯/碳纳米管复合物的过程中引入铁元素可以有效提高催化剂的氧还原活性,并且发现通过在热处理和氮掺杂过程中加入二氧化硅纳米颗粒及随后除去二氧化硅,可以在氮掺杂的石墨烯/碳纳米管复合物材料中有效地形成多孔结构. 这种多孔结构的形成不仅可以在复合物中引入更多的高活性催化位点,而且有利于暴露更多的催化活性位并促进氧还原反应中的传质过程. 结合碳纳米管、石墨烯和多孔结构的三者优点,所制备的多孔氮掺杂碳材料表现出优异的电催化氧还原性能. 进一步的实验表明,这类材料还表现出优异的抗甲醇中毒能力和良好的稳定性,因此在性能改进后有望用于燃料电池等能量转换与存储器件.     

氮掺杂纳米碳块的制备及氧还原的高电化学催化活性

面对全球化的能源危机,燃料电池由于其高效性和可重复使用性成为越来越具有潜力的能量转化设备.阴极发生的氧气还原反应对于燃料电池的性能十分重要,寻找高效的氧还原催化剂在很大程度上可以提高燃料电池的性能.传统的氧还原催化剂是贵金属铂,但是铂的价格十分高,较差的稳定性和选择性限制了它的商业化应用,因此找到一种廉价高效的非贵金属氧还原催化剂来代替铂基催化剂成为目前的研究热点.我们最近发现将纯的三羟甲基氨基甲烷置于管式炉中在800°C下真空烧制2 h,可以简单快捷地得到一种含 N量为4.11%的纳米碳块(标记为 NCNBs-800),该材料可用于催化电化学氧气还原反应.同样情况下在700和900°C下合成的材料标记为 NCNBs-700和 NCNBs-900.采用傅里叶变换红外光谱(FTIR)、X射线光电子能谱(XPS)、扫描电子显微镜(SEM)、X射线衍射(XRD)和电化学旋转圆盘方法与技术对催化剂的成分、形貌和电催化性能进行了表征. SEM表明 NCNBs-800为直径为60 nm的碳块,用 FTIR手段表征了 NCNBs-800的结构变化,三羟甲基氨基甲烷中的–OH和–NH2在高温下发生消去反应,形成了饱和度不同的 C–N键和 C–C键.这些饱和度不同的 N原子和 C原子增加了材料的缺陷结构和活性位点,进一步促进了氧还原反应的催化性能.采用 XPS分析了 NCNBs-800表面的元素,通过对 N 1s进行分峰拟合,发现 NCNBs-800含有能促进氧还原性能的吡啶-N和吡咯-N,特别是吡啶-N,它吸电子的能力很强,从而导致与它邻近的 C原子表面具有一定的正电荷,这些正电荷促进了氧气的吸附和还原,为氧气还原反应提供活性位点,促进氧气还原反应的发生. XRD结果表明,三羟甲基氨基甲烷热解前后的 XRD谱图有明显变化,热解后的三羟甲基氨基甲烷呈现两个宽峰,代表着杂化碳的存在. NCNBs-800的衍射峰强度比 NCNBs-700以及 NCNBs-900大,但是宽度则比 NCNBs-700以及 NCNBs-900小,这表明800°C有利于材料的石墨烯化及碳化过程.电化学阻抗可以表明修饰电极的表面性质,阻抗图中高频处半圆的直径大小代表电子转移阻力,低频处的线性部分代表扩散过程.阻抗数据表明, NCNBs-800的电荷转移电阻可与 Pt/C催化剂相比,但是比裸露的玻碳电极小.这表明 NCNBs-800有较好的导电性和电化学性质. CV曲线表明 NCNBs-800氧还原的起始电位是-0.05 V (vs Ag/AgCl),氧气的还原电位是0.20 V (vs Ag/AgCl),说明 NCNBs-800具有良好的电化学催化性能.旋转环盘电极仪测得的氧还原极化曲线表明,在-0.3 to-0.8 V下的 NCNBs-800氧还原的电子转移数为3.4,过氧化氢产率为52%-35%,表明 NCNBs-800呈现一个提高的四电子过程.稳定性对于燃料电池氧气还原反应也是一个十分重要的性能,通过计时电流技术在电压为-0.2 V下对 NCNBs-800与 Pt/C进行了稳定性测试.结果表明,在2500 s之后 NCNBs-800相对于它的最初催化活性损失为17.56%,而 Pt/C损失了30.71%,从而说明 NCNBs-800的稳定性优于 Pt/C.总之,我们通过一步热解的简易技术制备了一种氮掺杂纳米碳材料,该碳材料具有廉价、高效和容易制备等特点,具有良好的电化学催化性能,有望在燃料电池氧化还原反应中得到大规模应用.