Investigations of thickness-shear mode elastic constant and damping of shunted piezoelectric materials with a coupling resonator

Shear-mode piezoelectric materials have been widely used to shunt the damping of vibrations where utilizing surface or interface shear stresses. The thick-shear mode(TSM) elastic constant and the mechanical loss factor can change correspondingly when piezoelectric materials are shunted to different electrical circuits. This phenomenon makes it possible to control the performance of a shear-mode piezoelectric damping system through designing the shunt circuit. However, due to the difficulties in directly measuring the TSM elastic constant and the mechanical loss factor of piezoelectric materials, the relationships between those parameters and the shunt circuits have rarely been investigated. In this paper, a coupling TSM electro–mechanical resonant system is proposed to indirectly measure the variations of the TSM elastic constant and the mechanical loss factor of piezoelectric materials. The main idea is to transform the variations of the TSM elastic constant and the mechanical loss factor into the changes of the easily observed resonant frequency and electrical quality factor of the coupling electro–mechanical resonator. Based on this model, the formular relationships are set up theoretically with Mason equivalent circuit method and they are validated with finite element(FE) analyses. Finally, a prototype of the coupling electro–mechanical resonator is fabricated with two shear-mode PZT5 A plates to investigate the TSM elastic constants and the mechanical loss factors of different circuit-shunted cases of the piezoelectric plate. Both the resonant frequency shifts and the bandwidth changes observed in experiments are in good consistence with the theoretical and FE analyses under the same shunt conditions. The proposed coupling resonator and the obtained relationships are validated with but not limited to PZT5 A.     

Elastic characterization of closed cell foams from impedance tube absorption tests

A method is presented to determine the bulk elastic properties of isotropic elastic closed-cell foams from impedance tube sound absorption tests. For such foams, a resonant sound absorption is generally observed, where acoustic energy is transformed into mechanical vibration, which in turn is dissipated into heat due to structural damping. This article shows how the bulk Young's modulus, Poisson's ratio, and damping loss factor can be deduced from the resonant absorption. Also, an optimal damping loss factor yielding 100% of absorption at the first resonance is defined from the developed theory. The method is introduced for a sliding edge condition which is an ideal condition. Then, the method is extended to a bonded edge condition which is more easily achievable and additionally enables the identification of the Poisson's ratio. The method is experimentally tested on expanding closed-cell foams to find their elastic properties in both cases. Using the found properties, sound absorption predictions using an equivalent solid model with and without surface absorption are compared to measurements. Good correlations are obtained when considering surface absorption.     

Investigation of multi-layer sandwich beams through single degree-of-freedom transformation

The dynamic behaviors of multi-layer sandwich beams are investigated through single degree-of-freedom (SDOF) transformation. The frequency response of the multi-layer sandwich beam is obtained using finite element code COMSOL and is transformed to a SDOF system with the same frequency response. Hence, the mass, spring constant and damping coefficient of the sandwich beams with different lengths and number of visco-elastic layers can be investigated. Further, viscous damping and structural damping models are individually employed to simulate the damping effect of the sandwich beam. The frequency responses from both models are compared with that from COMSOL and experiment. The resonant peak and resonant frequency of the SDOF system using structural damping model is more consistent with that from COMSOL. The experimental result demonstrates that the response of the sandwich beam can be predicted through COMSOL and SDOF transformation.     

Resonant response of orthotropic cylindrical shells

The resonant response of simply supported, thin and thick, orthotropic cylindrical shells is determined by using modal analysis, for three levels of hysteretic damping. This response is significantly changed if the larger of the elastic constants associated with normal stresses refers to the meridional, instead of the circumferential, direction. These changes may be related to changes in the relevant natural frequency. The causes of the latter are studied by considering the modal amplitudes and the contributions to the strain energy function associated with the various stress resultants.     

Matching of asymptotic models in scattering of a plane acoustic wave by an elastic cylindrical shell

Scattering of a plane harmonic acoustic wave by an elastic cylindrical shell is considered. The procedure based on matching of asymptotic models is developed. The long-wave models (the Kirchhoff-Love theory (or its refinement) and the long-wave high-frequency approximation) are exploited in the vicinities of zero frequency and thickness resonance frequencies, whilst the model of a fluid-loaded flat elastic layer is utilized outside the aforementioned vicinities. Comparison with the exact solution demonstrates that the proposed approach is highly efficient for total synthesis of the scattered pressure as well as for uniform approximation of the resonant curves associated with partial modes.     

Optimum distribution of additive damping for vibrating beams

Cost and weight effectiveness of concentrated and distributed additive damping is studied for linear systems (discrete and continuous) under prescribed harmonic loads and/or displacements. Stiffness and mass changes due to additive damping are included. From a numerical example studied it can be concluded that optimal damping distributions can reduce resonant responses by about 40% as compared to uniformly distributed damping of the same cost or weight. The optimization technique as well as an exact displacement method for analysis of harmonically vibrating beams and frames are presented.     

Helmholtz水声换能器弹性壁液腔谐振频率研究

针对传统Helmholtz水声换能器设计中刚性壁假设的局限性,将Helmholtz腔体的弹性计入到液腔谐振频率计算中,实现低频弹性Helmholtz水声换能器液腔谐振频率精确设计.基于细长圆柱壳腔体的低频集中参数模型,导出了腔体弹性引入的附加声阻抗表达式,得到了弹性壁条件下Helmholtz水声换能器等效电路图,给出了考虑了末端修正的弹性壁Helmholtz共振腔液腔谐振频率计算公式.利用ANSYS软件建立了算例模型,仿真分析了不同材质、半径、长度时的Helmholtz共振腔液腔谐振频率.结果对比表明弹性理论值与仿真值符合得很好,相比起传统的刚性壁理论计算结果,本文的弹性壁理论得出的液腔谐振频率值有所降低,与真实情况更加接近.本文的结论可以为精确设计低频弹性Helmholtz水声换能器提供理论支持.     

Vibration of continuous systems with compliant boundaries

A theoretical study of two types of continuous systems with a general form of compliant boundary conditions is presented. The systems considered are elastic beams and circular plates with elastic damped edge constraints. Beam studies are restricted to those with identical boundary conditions at each end. The method of solution consists of formulating the edge condition of the system in terms of the impedance of the compliant boundary material and of using classical solution techniques to solve the equations of motion. The result of matching the boundary conditions of the system with constraining conditions is the system frequency equation in terms of the constraint impedances.A discussion is presented giving the influence of the compliant material on the vibration of the structure. The models give numerically the effect of elasticity and damping of the supports on the resonant frequencies of the systems. Parameters are obtained which indicate when one may assume simply supported or clamped boundaries for the actual case of elastic damped constraints without introducing large errors in the natural frequencies.     

复合局域共振梁结构带隙研究

该文将周期局域共振梁结构中的基体结构由单一材料发展成多相材料,建立了周期复合局域共振梁结构。由共振单元在单胞中的排列位置,考虑了三种构型,并利用传递矩阵方法计算了在弹性基底作用下这些结构产生的局域共振带隙性质。结果表明,与局域共振梁结构相比,复合局域共振梁结构产生的局域共振带隙对应的频率范围更宽,禁带范围内弹性波的衰减峰值和衰减均值更高。除此之外,该文还分析了局域共振结构、单胞尺寸、基体材料和局域共振结构中的阻尼对弹性波在空间中传播和衰减特性的影响,为满足特定的隔声隔振要求的结构设计提供了依据。     

Parameter estimation and multivariable model building for the non-destructive, on-line determination of eggshell strength

In the non-destructive quality assessment of agro-products using vibration analysis, the resonant frequency and the damping of the vibration are the main interest. Those parameters are usually calculated starting from the frequency spectrum, obtained after a fast Fourier transformation (FFT) of the time signal. However, this method faces several drawbacks when applied to short-time signals, as in the case of impact testing of highly damped specimen. An alternative to the FFT method is used for the high-resolution estimation of both resonant frequency and damping. Furthermore, the mass-spring model that is used in the literature for non-destructive quality assessment of various agro-products is extended with the incorporation of the damping and a shape characteristic. As a practical example, eggshell stiffness was estimated using vibration measurements. A data set consisting of 229 eggs was measured. It is shown that both the damping and the shape characteristics are of major importance to explain eggshell strength. This paper makes clear that a univariable model, as is mostly used in the literature, is not always satisfactory to describe the vibration behaviour of biological products.     

脉冲激光在有机分子材料中的共振传播

利用麦克斯韦-布洛赫耦合方程,研究了激光脉冲在4,4′-二甲氨基二苯乙烯分子材料中的共振传播,探讨了激光脉冲在传播中的时空演化情况.在数值计算中考虑了各种阻尼效应.     

Estimation of resonant peak amplitudes

A simple method is proposed for estimating the resonant peak response levels of damped structures, by using an analysis of undamped vibration. The method is based on a simple identity which is exact for a single degree of freedom system and approximate for more general systems. However, since the level of damping in practical structures can seldom be described with any precision, it is argued that a simple approximate method for predicting resonant vibration levels is the most appropriate. A number of examples and applications are described.     

Analysis of Frequency Spectrum of Laser-Induced Vibration of Microbeam Resonators

The vibration phenomenon during pulsed laser heating of micro-beams is investigated. The beam is made of silicon and is heated by a laser pulse with a non-Gaussian temporal profile and with an ultrashort pulse duration of 2ps, which incites vibration due to the thermoelastic damping effect. This coupled thermoelastic problem is solved using an analytical-numerical technique based on the Laplace transformation. The damping ratio and resonant frequency shift ratio of beams due to the air damping effect and the thermoelastic damping effect are also examined and discussed.     

微探针纳米尺度振动测试的实验研究

微探针是扫描探针显微镜(SPM)的重要组成部件,其共振频率等振动特性直接影响系统的性能。给出了系统微探针共振频率的测试方法,对微探针在压电陶瓷驱动力作用下的受迫振动进行了有限元分析。提出了相位变化0.1°所对应的0.1nm位移分辨率的双频激光外差干涉光学测量系统,对微探针纳米尺度振动特性进行了测试对比实验,并对SPM标定样块进行了比对分析。实验结果验证了双频激光外差干涉测量方法的可行性和其应用价值。     

Practical industrial method of increasing structural damping in machinery,I: Squeeze-film damping with air

There is frequently a need to reduce sound radiation due to resonant flexural motion of stiff machinery panels. This can be achieved by applying squeeze-film damping to the vibrating panel by attaching an auxiliary plate parallel to the surface, thereby trapping a thin layer of air. Relative vibration of the plates pumps this air at high velocities, resulting in energy loss due to the air viscosity. In this study the damping below the critical frequency of the “thick plate” with an “attached plate” and air layer has been investigated by using an impedance approach. This model is incorporated into a two element Statistical Energy Analysis (SEA) model to predict the damping well above the critical frequency of the thick plate. The agreement between the predicted and measured results is remarkably good. Below the critical frequency the damping is pumping controlled, while above critical the plate couplings are the controlling factor.     

Quantitative determination of material viscoelasticity using a piezoelectric cantilever bimorph beam

The objective of this paper is to formulate the governing equation of a cantilever bimorph beam associated with a tip mass in contact with a viscoelastic material, which is modeled by a stiffness and a damper in parallel. From the eigenvalue problem, we can obtain the resonant frequencies as functions of the tip mass and material stiffness. The relation between the spectrum and material damping is established by the half-power bandwidth. It is found that the resonant frequencies increase as the material stiffness increases or the tip mass decreases, and the spectrum decreases by increasing the damping. From the analytic results, a cantilever could provide a technique to assess material viscoelasticity by simple measurements of the resonant frequency and the spectrum. Since the cantilever's behavior scales with its geometry, the device can be designed specifically for mechanical measurement of a microscopic system such as living cells and biomaterials.     

Point mobility of a cylindrical plate incorporating a tapered hole of power-law profile

The paper describes the results of experimental measurements of point mobility carried out on circular plates containing tapered holes of quadratic power-law profile with attached damping layers. The obtained results are compared to the developed numerical model, as a means of validation. The profiles of the tapered hole in the plates are designed to replicate near zero reflection of quasi-plane waves from a tapered hole in geometrical acoustics approximation, also known as acoustic black hole effect. The driving point mobility measurements are provided, showing a comparison of the results for a constant thickness circular plate, a constant thickness plate with a layer of damping film applied and a plate with a quadratic power-law profile machined into the center, which is tested with a thin layer of elastic damping material attached. The results indicate a substantial suppression of resonant peaks, agreeing with a numerical model, which is based on the analytical solution available for the vibration of a plate with a central quadratic power-law profile. The paper contains results for the case of free boundary conditions on all edges of the plates, with emphasis placed on the predictions of resonant frequencies and the amplitudes of vibration and loss factor.     

动态弹性模量测量中的谐振频率分析

针对动态弹性模量实验中多个频率处出现共振峰且峰值较大,通过实验进行了分析。当出现共振峰时,先让波形稳定1～2min,再用一塑料夹子分别夹紧试样与支撑片。观察两种情况下,哪一种情况共振峰减小的程度大。结果表明,最小的共振频率并非试样的振动基频。较大的共振频率为试样的高次谐振频率。     

Formation and coupling of band gaps in a locally resonant elastic system comprising a string with attached resonators

A uniform string with periodically attached spring-mass resonators represents a simple locally resonant continuous elastic system whose band gap mechanisms are basic to more general and complicated problems. In this Letter, analytical models with explicit formulations are provided to understand the band gap mechanisms of such a system. Some interesting phenomena are demonstrated and discussed, such as asymmetric/symmetric attenuation behavior within a resonance gap, and the realization of a super-wide gap due to exact coupling between Bragg and resonance gaps. In addition, some approximate formulas for the evaluation of low frequency resonance gaps are derived using an approach different from existing investigations.