Preparation and characterization of polymer/silica nanocomposites via double in situ miniemulsion polymerization

Polymer/SiO₂ nanocomposite microspheres were prepared by double in situ miniemulsion polymerization in the presence of methyl methacrylate, butyl acrylate, γ‐methacryloxy(propyl) trimethoxysilane, and tetraethoxysilane (TEOS). By taking full advantage of phase separation between the growing polymer particles and TEOS, inorganic/polymer microspheres were fabricated successfully in a one‐step process with the formation of SiO₂ particles and the polymerization of organic monomers taking place simultaneously. The morphology of nanocomposite microspheres and the microstructure, mechanical properties, thermal properties, and optical properties of the nanocomposite films were characterized and discussed. The results showed that hybrid microspheres had a raspberry‐like structure with silica nanoparticles on the shells of polymer. The silica particles of about 20 nm were highly dispersed within the nanocomposite films without aggregations. The transmittance of nanocomposite film was comparable to that of the copolymer film at around 70–80% from 400 to 800 nm. The mechanical properties and the fire‐retardant behavior of the polymer matrix were improved by the incorporation of silica nanoparticles. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3128–3134, 2010     

The synthesis and characterization of polyorganosiloxane nanoparticles from 3-mercaptopropyltrimethoxysilane for preparation of nanocomposite films via photoinitiated thiol-ene polymerization

This article describes the synthesis of modified silica nanoparticles (SiO₂-MPTMS) via the condensation reaction carried out between silanol moieties of silica nanoparticles and the trialkoxy silyl groups of (3-mercaptopropyl) trimethoxysilane (MPTMS). Then, SiO₂-MPTMS nanoparticles in certain amounts (0.5 wt %, 1 wt %, 2.5 wt % and 5 wt %) were incorporated into thiol-ene resins consisting of bisphenol A glycerolate dimethacrylate and trimethylolpropane tris(3-mercaptopropionate) to prepare nanocomposite films via the photoinitiated thiol-ene polymerization in presence of 2,2-Dimethoxy-2-phenylacetophenone 99% as a photoinitiator. Fourier transform infrared spectroscopy, dynamic light scattering, scanning transmission electron microscopy, thermal gravimetric analyzer, and X-ray photoelectron spectrometer were employed to characterize SiO₂-MPTMS nanoparticles. It was revealed that the nanosilica surface was successfully grafted by MPTMS with the grafting ratio of 22.9%. Properties of the nanocomposite films such as decomposition temperature, thermal glass transition temperature, tensile strength, hardness, and particle distribution were investigated and the results were compared with each other and neat film. The addition of MPTMS-modified silica particles did not improve the thermal stability of the films. In scanning electron microscopy study, it was seen that 2.5 wt % of these nanoparticles used as additives were about 200 nm in size and dispersed homogeneously in the polymer matrix. The increase in tensile strength of nanocomposite films compared to the neat film was measured as 77.3% maximum.     

Synthesis and barrier properties of a film polymer nanocomposite based on polystyrene and cadmium sulfide nanoparticles

A film polymer nanocomposite with nanoparticles of a chalcogenide semiconductor, CdS, in a polystyrene matrix was prepared on the surface of 08kp steel. The barrier properties of the synthesized two-layer film nanomaterial in a 3 wt % aqueous NaCl solution were evaluated by measuring the electrode potential of coated and uncoated specimens and were compared with those of polymer films without nanofiller and with Fe₃O₄ nanoparticles. Introduction of hydrophobic CdS nanoparticles into the polymer matrix leads to significant enhancement (by ～20%, as compared to Fe₃O₄) of the barrier properties of the polymer nanocomposite.     

Preparation and characterization of poly(l-lactic acid)/TiO2 nanoparticle nanocomposite films with high transparency and efficient photodegradability

Poly(l-lactic acid)-TiO₂ nanoparticle nanocomposite films were prepared by incorporating surface modified TiO₂ nanoparticles into polymer matrices. In the process of preparing the nanocomposite films, severe aggregation of TiO₂ nanoparticles could be reduced by surface modification by using carboxylic acid and long-chain alkyl amine. As a result, the nanocomposite films with high transparency, similar to pure PLA films, were obtained without depending on the amount of added TiO₂ nanoparticles. A TEM micrograph of the nanocomposite films suggests that the TiO₂ nanoparticles of 3-6 nm in diameter were uniformly dispersed in polymer matrices. Photodegradation of PLA-TiO₂ nanoparticle nanocomposite films was also investigated. The results showed that nanocomposite films could be efficiently photodegraded by UV irradiation in comparison with pure PLA.     

Specific features of the synthesis and the physicochemical properties of nanocomposite polymer electrolytes based on poly(ethylene glycol) diacrylate with the introduction of SiO<Subscript>2</Subscript>

The specific features of the synthesis and the physicochemical properties of new nanocomposite polymer electrolytes (NPE) based on poly(ethylene glycol) diacrylate, a liquid electrolyte, and silicon dioxide were studied. The kinetics of polymerization of the system in question were studied by isothermal calorimetry and the optimal conditions for the hardening of the NPE were selected. The dependence of the conductivity of the electrolyte samples on the amount of SiO₂ nanopowder introduced, the presence of preliminary ultrasonic treatment of the nanocomposite mixture before the synthesis, and the storage duration of the samples was studied using the electrochemical impedance method. The maximum conductivity (4.3?10^–3 S cm^–1 at 20 °C) was observed for samples without preliminary treatment with the introduction of 6 wt.% of SiO₂ and for the samples after ultrasonic treatment with 8 wt.% of SiO₂. The electrolyte films with the optimal SiO₂ content of 4 wt.% maintained their properties for 24 months.     

Mechanical and Electrochemical Properties of New Nanocomposite Polymer Electrolytes Based on Poly(vinylidene fluoride-co-hexafluoropropylene) and SiO<Subscript>2</Subscript> Addition

Nanocomposite polymer electrolytes based on the system poly(vinylidene fluoride-co-hexafluoropropylene)–liquid electrolyte 1 mol/L LiBF₄ in gamma-butyrolactone which is modified by introducing up to 10 wt % of SiO₂ nanopowder (an average particle size of 7 nm) are synthesized and characterized. The introduction of SiO₂ nanoparticles worsens the elasticity of films but increases their fracture stress to 24 MPa. The conductivity of the nanocomposite electrolytes containing SiO₂ nanoparticles is higher than that without SiO₂ and attains 3.7 mS/cm at 20°C for the electrolyte containing 1.25 wt % SiO₂. Upon the introduction of SiO₂ nanoparticles, the electrochemical stability of electrolytes grows by 0.50–0.85 V and attains 6.7 V relative to Li/Li⁺.     

The synthesis and characteristic study of 6FDA-6FHP-NLO polyimide/SiO2 nanohybrid materials

Hybrid nanocomposite films of silica (SiO₂) in polyimide (PI) from 4,4^′-(hexafluoroisopropylidene) diphthalic arhydride (6FDA), 2,2-Bis (3-amino-4-hydroxyphenyl) hexafluoropropane (6FHP) and nonlinear optical (NLO) molecule have been successfully fabricated by an in situ sol-gel process. The silica content in the hybrid films was varied from 0 to 22.5 wt%. These nanocomposite films exhibit fair good optical transparency. Fourier transform infrared (FTIR) spectroscopy results confirm the formation of SiO₂ particles in PI matrix. Scanning electron microscope (SEM) images show that the SiO₂ phase is well dispersed in the polymer matrix. Their glass transition behavior and thermal stability were investigated by differential scanning calorimeter (DSC) and thermal gravimetric analysis (TG).     

不同基底对TiO2和SiO2薄膜的光学性能的影响

采用溶胶-凝胶法分别在K9玻璃、单晶硅和石英玻璃基底上制备了纳米TiO₂和SiO₂薄膜。利用SEM、UV-Vis及反射式椭圆偏振光谱仪对薄膜的微观结构及光学特性进行了表征和分析。结果表明:3种基底中, 单晶硅基底上TiO₂和SiO₂薄膜折射率最大;在非晶态K9玻璃和石英玻璃基底上TiO₂薄膜折射率和透光率差异较大;SiO₂薄膜在非晶态基底上折射率、透光率相近;3种基底上薄膜的折射率和消光系数都有随波长增大而减小的趋势, 同时Cauchy模型能较好的描述单晶硅基底上两种薄膜在400~800 nm波段的光学性能。     

不同基底对TiO2和SiO2薄膜的光学性能的影响

采用溶胶-凝胶法分别在K9玻璃、单晶硅和石英玻璃基底上制备了纳米TiO₂和SiO₂薄膜。利用SEM、UV-Vis及反射式椭圆偏振光谱仪对薄膜的微观结构及光学特性进行了表征和分析。结果表明：3种基底中, 单晶硅基底上TiO₂和SiO₂薄膜折射率最大;在非晶态K9玻璃和石英玻璃基底上TiO₂薄膜折射率和透光率差异较大;SiO₂薄膜在非晶态基底上折射率、透光率相近;3种基底上薄膜的折射率和消光系数都有随波长增大而减小的趋势, 同时Cauchy模型能较好的描述单晶硅基底上两种薄膜在400~800 nm波段的光学性能。     

Densification of Sol-Gel Thin Films by Ultraviolet and Vacuum Ultraviolet Irradiations

Structural changes in SiO₂ and TiO₂ gel films were investigated using ultraviolet (UV) and vacuum ultraviolet (VUV) irradiations. A significant compaction with dehydration of SiO₂ gel films was induced by irradiation of photons in the range of 9–18 eV. The refractive index and the shrinkage of the irradiated SiO₂ gel films were comparable to those obtained by sintering at 1000°C. Densification of TiO₂ gel films was also observed with irradiation of 5–14 eV photons. However, effects of the irradiation on TiO₂ gel were smaller that those on SiO₂ gel. The structural changes in the gel films are attributed to electronic excitations which are induced by irradiation with photons having higher energies than the bandgap of the oxides. The photo-induced effects are presumed to depend on the optical properties and structure of the gels.     

Performance evaluation of a new nanocomposite polymer gel for water shutoff in petroleum reservoirs

Abstract

A new polymer gel nanocomposite is fabricated for excess water production control (water shut off) in petroleum reservoirs and its rheological behavior is evaluated in the presence of sea water and formation water at the temperature of 100?°C. It is shown that at a high salinity without using SiO₂ nanoparticles, the elastic modulus of synthesized polymer gel in the presence of sea water and formation water are 12.5?Pa and 9.8?Pa respectively. However by incorporation of SiO₂ nanoparticles in the polymer gel matrix, the elastic modulus of synthesized polymer gel in the presence of sea water and formation water can be improved to 13.56?Pa and 11.57?Pa respectively, which is quite interesting from reservoir engineering viewpoint. Equilibrium Swelling Ratio (ESR) of the nanocomposite polymer gel in sea water and formation water decreases as the concentration of the SiO₂ increases. Thermal stability of the polymer gel is investigated by differential scanning calorimetry (DSC) measurements. The inflexion temperature of the polymer gel is improved by incorporation of 2000?ppm SiO₂ nanoparticles. The fabricated polymer gel nanocomposite in this work can have potential application in reduction of excess water production during enhanced oil recovery (EOR) operations in petroleum industry.     

Photocatalytic performance of silver-modified TiO2 embedded in poly(ethyl-acrylate-co-methyl metacrylate) matrix

The plasmonic Ag-TiO₂ (with 0.5 wt% Ag) photocatalyst was prepared on P25 TiO₂ surface. The presence of AgNPs on the titania was indicated by the UV–vis spectrum, which showed a plasmonic absorbance band in the visible range (λ _max?=?455 nm). XPS measurements suggested that Ag was in metallic (Ag) and in oxide forms on TiO₂. Ag-TiO₂ photocatalyst and TiO₂ were embedded in [poly(ethyl acrylate-co-methyl methacrylate; p(EA-co-MMA)] copolymer to attain mechanically stable, photocatalytically active nanocomposite films. The photooxidation of ethanol was slower on the photocatalyst/polymer nanocomposites, but it could be significantly improved by irradiating them with UV light. The photoaging was applied as a post-preparation treatment to improve the photocatalytic activity of the nanocomposite films. Changed surface morphology and the partial destruction of the polymer were supported by AFM and FTIR results. Contact angle measurements were used to determine the surface free energies of the prepared and the photoaged nanocomposite films.     

Moisture and solvent responsive cellulose/SiO<Subscript>2</Subscript> nanocomposite materials

Water responsive SiO₂/cellulose nanocomposite hydrogels and films were constructed, for the first time, by dispersing SiO₂ nanoparticles into cellulose solution in LiOH/urea solvent, and then by crosslinking with epichlorohydrin or regeneration in coagulation bath, respectively. The cellulose nanocomposite materials were characterized by Field emission scanning electron microscopy, FTIR, dynamic rheology, wide angle X-ray diffraction and mechanical test. The SiO₂/cellulose nanocomposites at wet state or in water displayed unique behaviors, showing higher light transmittance than those before contacting with water. The results revealed that strong hydrogen-bonding interaction among water, cellulose and SiO₂ led the good dispersion of SiO₂ nanoparticles in the cellulose matrix. The incorporation of SiO₂ nanoparticles improved the transmittance and mechanical strength of the cellulose hydrogels, and also enhanced the mechanical strength of the films. Especially, the cellulose/SiO₂ nanocomposite films were milky at dry state, and changed to transparent after being soaked in water, different from the cellulose film without the SiO₂ nanoparticles. In our findings, SiO₂ and cellulose with water could form strong hydrogen bonding to create a homogenous network structure. The cellulose/SiO₂ composite as a smart material exhibited moisture and solvent responsiveness, showing potential applications in moisture detection.     

Effect of substrate on phase formation and surface morphology of sol-gel lead-free KNbO3, NaNbO3, and K0.5Na0.5NbO3 thin films

Environmentally acceptable lead-free ferroelectric KNbO₃ (KN) or NaNbO₃ (NN) and K_0.5Na_0.5NbO₃ (KNN) thin films were prepared using a modified sol-gel method by mixing potassium acetate or sodium acetate or both with the Nb-tartrate complex, deposited on the Pt/Al₂O₃ and Pt/SiO₂/Si substrates by a spin-coating method and sintered at 650°C. X-ray diffraction (XRD) analysis indicated that the NN and KNN films on the Pt/SiO₂/Si substrate possessed a single perovskite phase, while NN and KNN films on the Pt/Al₂O₃ substrate contained a small amount of secondary pyrochlore phase, as did KN films on both substrates. Scanning electron microscopic (SEM) and atomic force microscopic (AFM) analyses confirmed that roughness R _q of the thin KNN/Pt/SiO₂/Si film (?? 7.4 nm) was significantly lower than that of the KNN/Pt/Al₂O₃ film (?? 15 nm). The heterogeneous microstructure composed of small spherical and larger needle-like or cuboidal particles were observed in the KN and NN films on both substrates. The homogeneous microstructure of the KNN thin film on the Pt/SiO₂/Si substrate was smoother and contained finer spherical particles (?? 50 nm) than on Pt/Al₂O₃ substrates (?? 100 nm). The effect of different substrates on the surface morphology of thin films was confirmed.     

Crystallization of titania ultra-fine particles from peroxotitanic acid in aqueous solution in the present of polymer and incorporation into poly(methyl methacylate) via dispersion in organic solvent

We report a novel strategy for incorporation of titanium dioxide (TiO₂) particles, which were crystallized from peroxotitanic acid in the presence of hydrophilic polymer by hydrothermal treatment in aqueous solution, into poly(methyl methacrylate) (PMMA) via dispersion into chloroform. Dispersion of TiO₂ particles into chloroform was achieved by solvent change from water to chloroform in aid of amphiphilic polymer dispersant, poly(N-vinyl pyrrolidone) (PVP), poly(N-vinyl pyrrolidone-co-methyl methacrylate) (PVP-co-PMMA), poly(N-vinyl pyrrolidone-block-methyl methacrylate) (PVP-b-PMMA) through azeotropical removal of water. Incorporation of TiO₂ particles into PMMA was carried out by a casting process of a mixture of TiO₂ particles dispersed with PVP₁₅₄-b-PMMA₁₅₆ in chloroform and PMMA on a glass substrate. Resultant hybrid film containing TiO₂ less than 10 wt.% showed high transparency in visible region attributable to homogeneous dispersion into PMMA matrix. The refractive index of the hybrid films increased with TiO₂ content and agreed with the calculated values.     

Thermal and photochemical effects on the structure,morphology, thermal and optical properties of PVA/Ni0.04Zn0.96O and PVA/Fe0.03Zn0.97O nanocomposite films

Ni_0.04Zn_0.96O and Fe_0.03Zn_0.97O with average diameter of 23 and 19 nm, respectively, have been synthesized by a modified sol–gel method to be used in the preparation of (100 − x)/x poly(vinyl alcohol)/oxide nanocomposite films, with x = 0, 1, 3 and 5 (in wt.%). A 125 W-Hg vapor lamp with emission above 254 nmwas used to irradiate PVA/Ni_0.04Zn_0.96O and PVA/Fe_0.03Zn_0.97O films. The effect on their structural, thermal, morphological and optical properties was studied by TG, DSC, DRX, AFM, UV–vis and PL spectrophotometry. The Ni_0.04Zn_0.96O addition on PVA films decreases the thermal stability of the polymer in inert and in oxidative atmosphere. In contrast, the Fe_0.03Zn_0.97O presence in the PVA films seems to increase the thermal stability of the polymer. The characteristic peak of the crystalline phase of PVA and wurtzite phase of the zinc oxide were identified through X-ray diffraction in both films. The crystallinity of the PVA film increases with UV irradiation and with the presence of Ni_0.04Zn_0.96O and Fe_0.03Zn_0.97O. The roughness of the PVA film was not modified by the addition of the doped oxides; however, it increases after UV irradiation, more significantly in the films containing the oxides. The PVA film exhibits absorption around 280 nm characteristic of π–π^∗ transitions related to carbonyl groups from residuals acetate, while the 95/05 PVA/Ni_0.04Zn_0.96O and 95/05 PVA/Fe_0.03Zn_0.97O nanocomposite films show absorption at the visible region which is characteristics of the band gap reduction of the doped oxides. The photoluminescence of PVA was modified by the presence of the oxides in the film. These nanocomposite films are interesting due to their thermal, mechanical (flexible) properties and low cost of production. In addition they are also able to exhibit peculiar optical properties showing potential to be used in photonic devices, gas sensors and organic solar cell applications.     

Preparation and properties of silicon- and titanium-containing hybrid nanocomposite films based on ethyl cellulose

Nanocomposite hybrid films containing silicon and titanium compounds in the polymer matrix are prepared through the sol-gel method via the hydrolytic polycondensation of Si and Ti alkoxides (tetraethoxysilane and titanium tetrabutoxide) in the THF solution of a hydrophobic polymer, ethyl cellulose. Their structure and properties are studied with the use of a complex of physicochemical methods. During the hydrolysis of tetraethoxysilane and the subsequent polycondensation of the reaction products, silicon atoms are incorporated into the polymer and form -O-Si-O-bonds involving hydroxyl groups of ethyl cellulose. In the sol-gel method, titanium alkoxide yields nanosized particles of titanium dioxide that play the role of fillers in the polymer matrix. Titanium-containing films show solubility in THF and, after prolonged contact with the solvent, precipitate titanium dioxide from the solution. Hybrid films containing silicon are insoluble owing to the formation of a chemical network between polymer molecules and Si-OH groups of the products of hydrolysis of silicon alkoxide, as confirmed by the IR data. It is shown that the amounts and types of alkoxides and the diameters of the structures formed in the polymer matrix via the sol-gel procedure affect the hydrophilicity levels of ethyl cellulose hybrid films and their abilities to swell in water and aqueous solutions of organic dyes (brilliant blue and methylene blue). Ethyl cellulose hybrid films are hydrophilic, and they facilitate the removal of dye molecules from aqueous solutions. The best properties are featured by the films containing nanosized particles of titanium dioxide in the polymer matrix.     

Nanocomposite Polymer Electrolytes for the Lithium Power Sources (a Review)

Nanocomposite polymer electrolytes represent a perspective class of polymer electrolytes for electrochemical devices in which nanodisperse filler is introduced to the “solvating matrix + lithium salt” base composition. This three-section paper reviews studies devoted to the preparing and investigating of different types of novel nanocomposite polymer electrolytes for lithium power sources carried out for the last 15 years. Its first section is devoted to the solid nanocomposite polymer electrolyte consisting of polyethylene oxide, lithium salt, and nanodisperse filler (Al₂O₃, TiO₂, SiO₂, etc.); the second section, to nanocomposite polymer membranes based on the polyvinylidene fluoride-co-hexafluoropropylene that can be used as a substitute for inert polyolefine separator of polypropylene, polyethylene, or their alternating layers. It is this type of the nanocomposite polymer electrolytes that is the most perspective one; the great majority of publications are dedicated to this electrolyte. The third section of the review covers the studies of the nanocomposite polymer electrolytes based on different polymers, oligomers, and co-polymers prepared by different methods. Nanoparticles of Al₂O₃, TiO₂, SiO₂, ZnO, MgO, Fe₃O₄, Ca₃(PO₄)2, ZrO₂, clay, ferroelectric ceramics SrBi₄Ti₄O₁₅, a compound SO₄^2-–ZrO₂, molecular sieves, nanochitin, etc., are discussed as possible additives to the nanocomposite polymer electrolytes. The reference list contains 101 items.     

Photocatalytic Nanocomposite Films Fabricated by Layer‐by‐Layer Self‐assembly of TiO2 Nanoparticles and Lignosulfonates

Photocatalytic multilayer nanocomposite films composed of anatase TiO₂ nanoparticles and lignosulfonates (LS) were fabricated on quartz slides by the layer‐by‐layer (LBL) self‐assembly technique. X‐ray photoelectron spectroscopy (XPS), UV‐vis spectroscopy and atomic force microscopy (AFM) were used to characterize the TiO₂/LS multilayer nanocomposite films. Moreover, the photocatalytic properties (decomposition of methyl orange and bacteria) of multilayer nanocomposite films were investigated. XPS results indicated that the intensities of titanium and sulfur peaks increased with the LBL deposition process. A linear increase in absorbance at 280 nm was found by UV‐Vis spectroscopy, suggesting that stepwise multilayer growth occurs on the substrate and this deposition process is highly reproducible. AFM images showed that quartz slide was completely covered by TiO₂ nanoparticles when a 10‐bilayer multilayer film was formed. The decomposition efficiency of methyl orange by TiO₂/LS multilayer films under the same UV irradiation time increased linearly with the number of TiO₂ layers, and the results of decomposition of bacteria under UV irradiation showed that TiO₂/LS multilayer nanocomposite films exhibited excellent decomposition activity of bacteria (Escherichia coil).     

Structure and properties of regenerated cellulose/tourmaline nanocrystal composite films

Nanocomposite films were successfully prepared from cellulose and tourmaline nanocrystals with mean diameters of 70 nm in a 1.5 M NaOH/0.65 M thiourea aqueous solution by coagulation with 5 wt % CaCl₂ and then a 3 wt % HCl aqueous solution for 2 min. The structure and properties of the composite films were characterized by X‐ray diffraction, scanning electron microscopy, transmission electron microscopy, dynamic mechanical analysis (DMA), differential scanning calorimetry (DSC), and tensile testing. The results indicated that the tourmaline nanocrystals were dispersed in a cellulose matrix, maintaining the original structure of the nanocrystals in the composite films. The loss peaks (tan δ) in the DMA spectra and the decomposition temperatures in the DSC curves of the composite films were significantly shifted toward low temperatures, suggesting that the nanocrystals broke the partial intermolecular hydrogen bonds of cellulose, and this led to a reduction in the thermal stability. However, the nanocomposite films exhibited a homogeneous structure and dispersion of the nanocrystals. When the tourmaline content was in the range of 4–8 wt %, the composite films possessed good tensile strength (92–107 MPa) and exhibited obvious antibacterial action against Staphylococcus aureus. This work provides a potential way of preparing functional composite films or fibers from cellulose and nanoinorganic particles with NaOH/thiourea aqueous solutions. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 367–373, 2004