A simple protocol for protein extraction of recalcitrant fruit tissues suitable for 2-DE and MS analysis

Fruit tissues are considered recalcitrant plant tissue for proteomic analysis. Three phenol-free protein extraction procedures for 2-DE were compared and evaluated on apple fruit proteins. Incorporation of hot SDS buffer, extraction with TCA/acetone precipitation was found to be the most effective protocol. The results from SDS-PAGE and 2-DE analysis showed high quality proteins. More than 500 apple polypeptides were separated on a small scale 2-DE gel. The successful protocol was further tested on banana fruit, in which 504 and 386 proteins were detected in peel and flesh tissues, respectively. To demonstrate the quality of the extracted proteins, several protein spots from apple and banana peels were cut from 2-DE gels, analyzed by MS and have been tentatively identified. The protocol described in this study is a simple procedure which could be routinely used in proteomic studies of many types of recalcitrant fruit tissues.     

Protein extraction and 2-DE of water- and lipid-soluble proteins from bovine pericardium, a low-cellularity tissue

Bovine pericardium (BP) is an important biomaterial used in the production of glutaraldehyde-fixed heart valves and tissue-engineering applications. The ability to perform proteomic analysis on BP is useful for a range of studies, including investigation of immune rejection after implantation. However, proteomic analysis of fibrous tissues such as BP is challenging due to their relative low-cellularity and abundance of extracellular matrix. A variety of methods for tissue treatment, protein extraction, and fractionation were investigated with the aim of producing high-quality 2-DE gels for both water- and lipid-soluble BP proteins. Extraction of water-soluble proteins with 3-(benzyldimethylammonio)-propanesulfonate followed by n-dodecyl beta-D-maltoside extraction and ethanol precipitation for lipid-soluble proteins provided the best combination of yield, spot number, and resolution on 2-DE gels (Protocol E2). ESI-quadrupole/ion trap or MALDI-TOF/TOF MS protein identifications were performed to confirm bovine origin and appropriate subcellular prefractionation of resolved proteins. Twenty-five unique, predominantly cytoplasmic bovine proteins were identified from the water-soluble fraction. Thirty-two unique, predominantly membrane bovine proteins were identified from the lipid-soluble fraction. These results demonstrated that the final protocol produced high-quality proteomic data from this important tissue for both cytoplasmic and membrane proteins.     

Protein extraction for 2-DE from the lamina of Ecklonia kurome (laminariales): recalcitrant tissue containing high levels of viscous polysaccharides

Extraction of proteins from the tissues of laminarialean algae, i.e. kelp, is difficult due to high levels of nonprotein interfering compounds, mainly viscous polysaccharides. To establish proteomic analysis of kelp species, an ethanol/phenol extraction method was developed and compared to other popular methods. Proteins were extracted with phenol from crude protein powder, obtained by homogenizing the kelp tissues in ice-cold ethanol. The ethanol/phenol method produced high-quality proteins of the highest purity from the lamina of Ecklonia kurome, one of the Japanese dominant laminarialean algae. This method gave well-resolved 1-D SDS-PAGE or 2-DE images with low background and the highest number of bands or spots. In particular, proteins with neutral to basic pI's were efficiently extracted. Furthermore, 27 spots on the 2-DE gel were extensively identified by MALDI-TOF/TOF analysis. To the best of our knowledge, this is the first report of a protocol for protein extraction from kelp tissues that gives satisfactory 2-D protein profiles. It is expected that the protocol can be applied to other algae tissues or other recalcitrant plant tissues containing high levels of nonprotein interfering compounds.     

An efficient protein preparation for proteomic analysis of developing cotton fibers by 2-DE

Preparation of high-quality proteins from cotton fiber tissues is difficult due to high endogenous levels of polysaccharides, polyphenols, and other interfering compounds. To establish a routine procedure for the application of proteomic analysis to cotton fiber tissues, a new protocol for protein extraction was developed by optimizing a phenol extraction method combined with methanol/ammonium acetate precipitation. The protein extraction for 2-DE was remarkably improved by the combination of chemically and physically modified processes including polyvinylpolypyrrolidone (PVPP) addition, acetone cleaning, and SDS replacement. The protocol gave a higher protein yield and vastly greater resolution and spot intensity. The efficiency of this protocol and its feasibility in fiber proteomic study were demonstrated by comparison of the cotton fiber proteomes at two growth stages. Furthermore, ten protein spots changed significantly were identified by MS/tandem MS and their potential relationships to fiber development were discussed. To the best of our knowledge, this is the first time that a protocol for protein extraction from cotton fiber tissues appears to give satisfactory and reproductive 2-D protein profiles. The protocol is expected to accelerate the process of the proteomic study of cotton fibers and also to be applicable to other recalcitrant plant tissues.     

A protein extraction method compatible with proteomic analysis for the euhalophyte Salicornia europaea

Protein extraction from plants like the halophyte Salicornia europaea has been problematic using standard protocols due to high concentrations of salt ions in their cells. We have developed an improved method for protein extraction from S. europaea, which allowed us to remove interfering compounds and salt ions by including the chemicals borax, polyvinylpolypyrrolidone, and phenol. The comparative study of this method with several other protocols using NaCl-treated S. europaea shoots demonstrated that this method gave the best distinction of proteins on 2-DE gels. This protocol had a wide range of applications as high yields and good distinction of 1-DE gels for proteins isolated from twelve other plants were rendered. In addition, we reported results of 2-DE using the recalcitrant tissue of the S. europaea roots. We also demonstrated that this protocol is compatible with proteomic analysis as eight specific proteins generated by this method have been identified by MS. In conclusion, our newly developed protein extraction protocol is expected to have excellent applications in proteomic studies of halophytes.     

High MS-compatibility of silver nitrate-stained protein spots from 2-DE gels using ZipPlates and AnchorChips for successful protein identification

The availability of easy-to-handle, sensitive, and cost-effective protein staining protocols for 2-DE, in conjunction with a high compatibility for subsequent MS analysis, is still a prerequisite for successful proteome research. In this article we describe a quick and easy-to-use methodological protocol based on sensitive, homogeneous, and MS-compatible silver nitrate protein staining, in combination with an in-gel digestion, employing the Millipore 96-well ZipPlate system for peptide preparation. The improved quality and MS compatibility of the generated protein digests, as compared to the otherwise weakly MS-compatible silver nitrate staining, were evaluated on real tissue samples by analyzing 192 Coomassie-stained protein spots against their counterparts from a silver-stained 2-DE gel. Furthermore, the applicability of the experimental setup was evaluated and demonstrated by the analysis of a large-scale MALDI-TOF MS experiment, in which we analyzed an additional ~1000 protein spots from 2-DE gels from mouse liver and mouse brain tissue.     

Evaluation of extraction procedures for 2‐DE analysis of aphid proteins

Protein sample preparation is a crucial step in a 2‐DE proteomics approach. In order to establish a routine protocol for the application of proteomics analysis to aphids, this study focuses on the specific protein extraction problems in insect tissues and evaluates four methods to bypass them. The approaches of phenol extraction methanol/ammonium acetate precipitation (PA), TCA/acetone precipitation, PEG precipitation, and no precipitation were evaluated for proteins isolation and purification from apterous adult aphids, Sitobion avenae. For 2‐DE, the PA protocol was optimal, resulting in good IEF and clear spots. PA method yielded the greatest amount of protein and displayed most protein spots in 2‐DE gels, as compared with the TCA/acetone precipitation, PEG precipitation and no precipitation protocols. Analysis of protein yield, image quality and spot numbers demonstrate that the TCA/acetone precipitation protocol is a reproducible and reliable method for extracting proteins from aphids. The PEG precipitation approach is a newly developed protein extraction protocol for aphids, from which more unique protein spots can be detected, especially for detection of acid proteins. These protocols are expected to be applicable to other insects or could be of interest to laboratories involved in insect proteomics, despite the amounts and types of interfering compounds vary considerably in different insects.     

2-DE and MALDI-TOF-MS analysis of therapeutic fusion protein abatacept

2-DE and MALDI-TOF MS are useful techniques for the quality evaluation of medicinal products derived from recombinant DNA technology. The principal objective of this study has been to evaluate the suitability of 2-DE in combination with MALDI-TOF MS for the quality study of the therapeutic recombinant protein, abatacept. 1-DE SDS-PAGE, under reducing and nonreducing conditions, and 2-DE analysis were used for the assessment of M(r) , pI, and enzymatic deglycosylation efficiency of abatacept. 2-DE allowed the assessment of product identity, purity, charge heterogeneity, isoform pattern, and post-translational modifications. Furthermore, optimization of the deglycosylation procedure, charge heterogeneity, and sample preparation for the subsequent MALDI-TOF MS analysis has been addressed. PMF analysis allowed rapid identity confirmation of abatacept.     

Effective protein extraction protocol for proteomics studies of Jerusalem artichoke leaves

Protein extraction is a crucial step for proteomics studies. To establish an effective protein extraction protocol suitable for two‐dimensional electrophoresis (2DE) analysis in Jerusalem artichoke (Helianthus tuberosus L.), three different protein extraction methods—trichloroacetic acid/acetone, Mg/NP‐40, and phenol/ammonium acetate—were evaluated using Jerusalem artichoke leaves as source materials. Of the three methods, trichloroacetic acid/acetone yielded the best protein separation pattern and highest number of protein spots in 2DE analysis. Proteins highly abundant in leaves, such as Rubisco, are typically problematic during leaf 2DE analysis, however, and this disadvantage was evident using trichloroacetic acid/acetone. To reduce the influence of abundant proteins on the detection of low‐abundance proteins, we optimized the trichloroacetic acid/acetone method by incorporating a PEG fractionation approach. After optimization, 363 additional (36.2%) protein spots were detected on the 2DE gel. Our results suggest that trichloroacetic acid/acetone method is a better protein extraction technique than Mg/NP‐40 and phenol/ammonium acetate in Jerusalem artichoke leaf 2DE analysis, and that trichloroacetic acid/acetone method combined with PEG fractionation procedure is the most effective approach for leaf 2DE analysis of Jerusalem artichoke.     

Comparative evaluation of five protocols for protein extraction from stony corals (Scleractinia) for proteomics

Corals especially the reef‐building species are very important to marine ecosystems. Proteomics has been used for researches on coral diseases, bleaching and responses to the environment change. A robust and versatile protein extraction protocol is required for coral proteomics. However, a comparative evaluation of different protein extraction protocols is still not available for proteomic analysis of stony corals. In the present study, five protocols were compared for protein extraction from stony corals. The five protocols were TRIzol, phenol‐based extraction (PBE), trichloroacetic acid (TCA)‐acetone, glass bead‐assisted extraction (GBAE) and a commercially available kit. PBE, TRIzol and the commercial kit were more robust for extracting proteins from stony corals. The protein extraction efficiency and repeatability, two dimensional electrophoresis (2‐DE) and matrix‐assisted laser desorption/ionization time of flight mass spectrometry (MALDI TOF MS) were employed to evaluate the protocols. The results indicated that PBE protocol had the better protein extraction efficiency than the others. Protein extraction coverage varied among the procedures. Each protocol favored for certain proteins. Therefore, it is very important for coral proteomic analysis to select a suitable protein protocol upon the experimental design. In general, PBE protocol can be the first choice for extracting proteins from stony corals.     

Alkaline extraction of human plasma proteins from nondenaturing micro-2-D gels for protein/polypeptide mass measurement and peptide mass fingerprinting using MALDI-TOF MS

Previously, we have reported a high-efficiency method of protein extraction from CBB-stained polyacrylamide gels for molecular mass measurement with MALDI-TOF MS [1]. In the present work, the alkaline extraction method was applied to CBB-stained 2-DE gels on which human plasma proteins were separated in the absence of denaturant. In order to examine the performance of the method, ten spots with apparent molecular masses (MMapp) in the range of 65 to 1000 kDa were selected and the proteins were extracted from the gel pieces. The extracts were subjected to whole-mass measurement by MALDI-TOF MS, with and without DTT treatment. In addition, the extracts were subjected to in-solution trypsin digestion followed by MALDI-TOF MS and PMF analysis. Successful extraction of proteins from the ten spots, up to MMapp 1000 kDa, has been ascertained by the significant PMF assignment (MASCOT) with high sequence coverage of the respective proteins or polypeptides. When direct mass measurement of the extracted proteins was attempted, three spots in MMapp range 65-100 kDa provided mass peaks. Five spots in MMapp range 150-400 kDa did not give mass peaks of the intact proteins, but showed those of the constituent polypeptides after the DTT treatment. Extraction of proteins prior to trypsin digestion enabled the procedure of PMF analysis to be much simpler than the conventional in-gel digestion method, providing comparable protein scores and sequence coverage. The technique presented here suggests a new strategy for the characterization of proteins separated by nondenaturing 2-DE.     

Improved solubilization of surface proteins from Listeria monocytogenes for 2-DE

Solubilization of bacterial surface (cell wall and membrane-associated) proteins for 2-DE is challenging, particularly in the case of Gram-positive bacteria. This is primarily due to strong protein association with the cell wall peptidoglycan and protein hydrophobicity. We solubilized surface proteins for 2-DE from the Gram-positive pathogen Listeria monocytogenes using mutanolysin, which digests cell wall peptidoglycan, and one of three different mixtures of zwitterionic detergent and chaotropes: (i) CHAPS/urea, (ii) amidosulfobetaine-14 (ASB-14)/urea/thiourea (iii) N-decyl-N,N'-dimethyl-3-ammonio-1-propanesulfonate/urea/thiourea. Cell lysis with mutanolysin followed by solubilization with ASB-14/urea/thiourea gave the highest overall protein yield with the best 2-DE resolution. Protein spot identification by MALDI-TOF/TOF-MS analysis revealed 29 characterized surface proteins of L. monocytogenes, 17 of which have not previously been reported on the surface proteome map. This is the first report describing the successful solubilization and 2-DE of L. monocytogenes proteins bound to the cell surface via an LPXTG motif or by a hydrophobic tail. The increase in surface proteome coverage obtained by mutanolysin and ASB-14/urea/thiourea solubilization suggests the utility of this method for future analytical and comparative studies of surface proteins from Listeria, and possibly other Gram-positive bacteria, using 2-DE proteomic analysis. An updated 2-DE reference map of L. monocytogenes surface proteins is presented.     

High-resolution 2-DE for resolving proteins, protein adducts and complexes in plasma

A 2-DE system has been devised in which proteins are first separated in their native state followed by separation according to mass under denaturing conditions (Nat/SDS-PAGE). Hydrophilic properties of the gel and the presence of dihydroxybisacrylamide in the first dimension allowed a good resolution for high-molecular-weight proteins and maintained interactions. With this method 252 plasma spots have been resolved and 140 have been characterized by MS as isoforms of 60 proteins, a relevant part of which (12) were not detected by traditional 2-D gels or by other nondenaturing 2-D techniques. The list includes complement factors (C4d, C7), coagulation factors (coagulation factor II, fibrin beta), apolipoproteins (apolipoprotein B) and cell debris (vinculin, gelsolin, tropomyosin, dystrobrevin beta, fibrinectin I). Nat/SDS PAGE also allowed separation of nicked forms of albumin, Apo B100 and alpha2-macroglobulin and showed the presence of atypical albumin adducts corresponding to post-translational and oxidation products. Our system provides therefore new tools for resolving proteins, protein aggregates and complexes and amplifies the potentiality of traditional electrophoretic analysis.     

Performance of nondenaturing micro 2-DE followed by third-dimension SDS-PAGE in the analysis of Escherichia coli soluble proteins

In a previous paper, we reported on the analysis of Escherichia coli (strain K‐12) soluble proteins by nondenaturing micro 2‐DE/3‐DE and MALDI‐MS‐PMF [Manabe, T., Jin, Y., Electrophoresis 2010, 31, 2740–2748]. To evaluate the performance of the 2‐DE/3‐DE technique, a nondenaturing 2‐DE gel just after the second‐dimension run was cut into 12 vertical strips, each 2 mm‐wide strip was set on a micro slab gel, and third‐dimension SDS‐PAGE was run in parallel. Each of the twelve 3‐DE gels showed about 150–200 CBB‐stained spots. Two of the 3‐DE gels were selected for the assignment of polypeptides using MALDI‐MS‐PMF and totally 161 polypeptides were assigned on the two 3‐DE gels, in which 81 have been assigned on the nondenaturing micro 2‐DE gel and 80 were newly assigned. Most of the newly assigned polypeptides resided in faintly stained spots on the 3‐DE gels, which indicates that the polypeptides were purified in the process of the third‐dimension separation. The comparisons of the apparent mass values estimated from the second‐dimension (nondenaturing pore‐gradient PAGE) mobility with those estimated from the third‐dimension (SDS‐PAGE) mobility suggested the oligomer structures of the assigned polypeptides and they matched well with those described in a database (UniProtKnowledgebase). The technique of nondenaturing micro 2‐DE/3‐DE, combined with MALDI‐MS‐PMF, could become an efficient method to obtain information on the quaternary structures of hundreds of cellular soluble proteins simultaneously because of its high efficiency in protein/polypeptide separation and assignment.     

Multivariate analysis of 2-DE protein patterns--practical approaches

Practical approaches to the use of multivariate data analysis of 2-DE protein patterns are demonstrated by three independent strategies for the image analysis and the multivariate analysis on the same set of 2-DE data. Four wheat varieties were selected on the basis of their baking quality. Two of the varieties were of strong baking quality and hard wheat kernel and two were of weak baking quality and soft kernel. Gliadins at different stages of grain development were analyzed by the application of multivariate data analysis on images of 2-DEs. Patterns related to the wheat varieties, harvest times and quality were detected on images of 2-DE protein patterns for all the three strategies. The use of the multivariate methods was evaluated in the alignment and matching procedures of 2-DE gels. All the three strategies were able to discriminate the samples according to quality, harvest time and variety, although different subsets of protein spots were selected. The explorative approach of using multivariate data analysis and variable selection in the analyses of 2-DEs seems to be promising as a fast, reliable and convenient way of screening and transforming many gel images into spot quantities.     

Saikosaponin v-2 from Bupleurum chinense

Bupleurum chinense DC. is a well-known and very important traditional chinese drug. It is often used to treat common cold with fever, alternating chill and fever, the feeling of fullness and oppression in the chest. However, little is reported about the chemical constituents. We have reported the isolation and elucidation of saponins and other compounds from the roots of Bupleurum chinense DC1. This paper deals with the structure elucidation of the new compound, Saikosaponin v-2(1).Saikosap…     

Optimization of supercritical fluid extraction of saikosaponins from Bupleurum falcatum with orthogonal array design

Supercritical fluid extraction (SFE) was used to extract saikosaponins a, c and d from the root of Bupleurum falcatum. An orthogonal array design L₉(3)⁴ was employed as a chemometric method for the optimization of the SFE conditions. The effects of four factors including pressure (30–40 MPa), temperature (40–50°C), ethanol concentration (60–100%) and time (2.5–3.5 h) on the yields of saikosaponins were investigated by a preparative SFE system in the SFE mode. Under the optimized conditions, namely 35 MPa of pressure, 45°C of temperature, 80% of ethanol concentration and 3.0 h of time, the yields of saikosaponin c, saikosaponin a, saikosaponin d, total saikosaponins and SFE extract were 0.16, 0.12, 0.96, 1.24 and 16.48 mg/g, respectively. Determinations of the saikosaponins were performed by HPLC.     

IPG with electrodic plateaus (and other unusual procedures for 2-DE)

We describe some simple changes to the geometry of the IPG strips that make them suitable to the loading of very large sample volumes and of high-salt solutions. Of special relevance is the possibility of using strips with immobilized plateau(s) to either side of the gradient, or to both, also in connection with in-gel rehydration protocols and focusing in stock trays. The only requirement to achieve this is to leave the all-ready-made attitude and go back to custom polymerization of the IPGs in one's laboratory.     

Application of pressure cycling technology to tissue sample preparation for 2-DE

2-DE is a powerful protein analytical tool whose major strengths include semiglobal quantitation and charge separation of complex protein mixtures, enabling the analysis of differential protein expression, and variable post-translational modification. One of 2-DE's limitations relates to its limited dynamic range and consequently the number of proteins expressed that can be analyzed on a single gel. In an attempt to improve the yield of detectable proteins during sample preparation, we applied a novel extraction technique called pressure cycling technology.     

Application of accelerated solvent extraction to the investigation of saikosaponins from the roots of Bupleurum falcatum

Accelerated solvent extraction (ASE) was applied to the extraction of saikosaponin a, saikosaponin c and saikosaponin d from the roots of Bupleurum falcatum. Main extraction parameters such as the extraction solvents, extraction temperature and static extraction time were investigated and optimized. The optimized procedure employed 70% methanol as extraction solvent, 120°C of extraction temperature, 10 min of static extraction time, 60% of flush volume and the extraction recoveries of the three compounds were near to 100% with one extraction cycle. The extracted samples were analyzed by HPLC with UV detector. The HPLC conditions were as follows: Hypersil ODS2 (4.6 mm×250 mm, 5 μm) column, acetonitrile and water as mobile phase, flow rate of 1.0 mL/min, UV detection wavelength of 204 nm and injection volume of 20 μL. Compared with the traditional methods including heat‐reflux extraction and ultrasonic‐assisted extraction, the proposed ASE method was more efficient and faster to be operated. The results indicated that ASE was an alternative method for extracting saikosaponins from the roots of B. falcatum.