Polymerization initiated by ylide: Polymerization of ethyl methacrylate with the use of 4-picolinium p-chloro phenacylide as initiator

The ylide 4-picolinium, p-chloro phenacylide-initiated thermal polymerization of ethyl methacrylate (EMA) was studied. 4-Picolinium p-chloro phenacylide induces the thermal polymerization of ethyl methacrylate at 65°C. The rate of polymerization (R_p) rose as the initiator concentration increased from 2 × 10^?3 to 4 × 10^?3 M and the initiating exponent was computed as 1.9. The R_p decreased as the concentration of ylide increased from 6 × 10^?2 to 1M. The greater initiator concentration also affected the molecular weight inversely. The polymerization was carried out at different temperatures and the overall activation energy was computed as 4.08 Kcal/mol. Polymerization was inhibited in the presence of hydroquinone as a radical scavenger. Kinetic studies and other data show that the overall polymerization takes place in a radical mechanism. The various kinetic parameters, such as the rate and average degree of polymerization, molecular weight, and energy of activation of the present system, were evaluated.     

Photopolymerisation of styrene initiated by triphenyl bismuthonium ylide

Photopolymerization of styrene initiated by tetraphenyl cyclopentadiene triphenyl bismuthonium ylide in dioxane was carried out in the presence of visible light (440 nm) at 30 ± 0.2°C for 55 h. The polymerization was inhibited by the presence of hydroquinone which is an evidence of the fact that polymerization takes place by radical mechanism. The system follows ideal radical kinetics (R_p ∝︁ [I]^0.5 [M]). The values of average degree of polymerization (P_n) decreases with the ylide. The mechanism of the reaction was elucidated by GPC and ESR techniques.     

The use of ylide (4-picolinium 4-chloro phenacyl methylide) as an initiator for the polymerization of methyl methacrylate

The thermal polymerization of methyl methacrylate [MMA] was carried out using ylide (4-picolinium 4-chloro phenacyl methylide) as an initiator. The rate of polymerization (R_p) increases with increasing monomer and initiator concentrations; The exponent value has been computed to be 1 ± 0.02 and 0.5, respectively. The reaction was carried out at four different temperatures and the overall activation energy has been computed to be 16.01 kcal/mol. The polymerization was inhibited in the presence of hydroquinone as a radical scavanger. Kinetic studies indicates that the overall polymerization takes place by a radical mechanism.     

Synthesis of pyridinium ylide complexes of methylcobaloxime and crystal structure determination of [benzoyl(1-pyridinio)methanide]bis(dimethylglyoximato)methylcobalt benzene solvate

Summary Pyridinium ylide complexes of methylcobaloxime were synthesized by the treatment of an ylide with Co(Hdmg)₂ Me(SMe₂). The crystal structure of one of the complexes, [Co(Hdmg)₂Me C₅H₅NCHCOPh]C₆H₆ has been determined by x-ray diffraction techniques. The crystals are monoclinic, space group P2₁/c, witha = 10.456(5),b = 11.079(4),c = 24.58(1) Å, = 99.58(6), V = 2808 ų, Z = 4. The Co-C (ylide) bond distance is 2.18 Å and Co-C(methyl) 2.04 Å. C(ylide)-Co-C(methyl) bond angle is 174.9°. The crystal, i.r. and¹H n.m.r. data suggest that thetrans-influence of the ylide ligands is larger than that of py, Melm, OH₂ or PPh₃.     

磷叶立德CH2PH3和类磷叶立德自由基∙CHPH3优势构型和C—P键结构的研究

采用MP4/6-311++G(d,p)和B3LYP/6-311++G(d,p)对磷叶立德CH₂PH₃和类磷叶立德自由基∙CHPH₃进行构型优化，从电子密度拓扑分析的角度对C—P键的键结构进行了探讨。得到如下结论：类磷叶立德自由基和磷叶立德的C—P键性质类似，但磷叶立德中π键由两个电子形成，类磷叶立德自由基中π键由一个电子形成，所以前者的π性明显，而后者的π性不明显。类磷叶立德自由基中的这个单电子在碳原子附近，垂直于对称面的方向上运动，有p_(C→P)配键的特征，所以类磷叶立德自由基∙CHPH₃中的C—P键比相应的产物∙CH₂PH₂中的C—P键要弱一些。     

Cyclic (Amino)(Phosphonium Bora‐Ylide)Silanone: A Remarkable Room‐Temperature‐Persistent Silanone

A silanone substituted by bulky amino and phosphonium bora‐ylide substituents has been isolated in crystalline form. Thanks to the exceptionally strong electron‐donating phosphonium bora‐ylide substituent, the lifetime at room temperature of the silanone is dramatically extended (t _1/2=4 days) compared to the related (amino)(phosphonium ylide)silanone VI (t _1/2=5 h), allowing easier manipulation and its use as precursor of new valuable silicon compounds. The interaction of silanone with a weak Lewis acid such as MgBr₂ increases further its stability (no degradation after 3 weeks at room temperature).     

A modified Wittig polycondensation--to high-trans- and high-molecular weight PPVs

A modified Wittig polycondensation was developed by replacing the bulky −PPh₃ with −PBu₃ ylide. Our studies suggested that the modified polymerization dramatically enhances trans-selectivity due to the decreased 1,3-steric interaction between butyl chain and triphenylamine group, together with the 1,2-steric interaction between the phenyl ring of the ylide and the triphenylamine group of the aldehyde. Moreover, the method also enhances high-molecular weight products by increasing the activity and solubility of the ylide.     

Kinetics of the 1,5-dipolar cyclization of 2-Vinylpyridinium ylides to Indolizines. Determination of rate parameters by laser flash photolysis

Nanosecond laser flash photolysis (λ = 355 nm) of an aqueous solution of 3-chloro-3-p-chlorophenyldiazirine in isooctane produces a transient absorption at 310 nm due to the formation of the carbene. In the presence of 2-vinylpyridine, a second transient with a broad absorption band peaking at 520 nm grows in. This absorption is attributed to 2-vinylpyridinium ylide. The ylide decays with a lifetime equal to 33 µs at 25°C independent of the concentration of 2-vinylpyridine. As the ylide decays, there is a concomitant growth of an absorption at 330 nm, attributed to the formation of inodolizine. The activation parameters for the 1,5-dipolar cyclization of the ylide to indolizine were determined; E_a = 12.1 kcal mol^?1 and log A = 13.4. © 1994 John Wiley & Sons, Inc.     

The Enantioselectivity and the Stereochemical Course of Copper‐Catalyzed Intramolecular CH Insertions of Phenyliodonium Ylides

The Cu‐catalyzed intramolecular CH insertion of phenyliodonium ylide 1b was investigated at 0° in the presence of several chiral ligands. Enantioselectivities varied in the range 38–72%, and were higher than those resulting from reaction of the diazo compound 1c at 65°. The intramolecular insertion of the enantiomerically pure methyl diazoacetate (R)‐ 20 and of the corresponding phenyliodonium ylide (R)‐ 21 proceeded to (R)‐ 23 with retention of configuration with [Cu(hfa)₂] (hfa=hexafluoroacetylacetone=1,1,1,5,5,5‐hexafluoropentane‐2,4‐dione) and [Rh₂(OAc)₄]. These results are consistent with a carbenoid mechanism for the Cu‐catalyzed insertion with phenyliodonium ylides. However, the insertion of the perfluorosulfonated phenyliodonium ylide (R)‐ 29 afforded with [Cu(hfa)₂] as well as with [Rh₂(OAc)₄] the cyclopentanone derivative 30 as a cis/trans mixture with only 56–67% enantiomeric excess.     

Carbenoid Reactions of Dimethyl Diazomalonate with Aromatic Thioketones and 1,3-Thiazole-5(4H)-thiones

Dimethyl diazomalonate ( 4 ) and thiobenzophenone ( 2a ) do not react in toluene even after warming to 50°. After addition of catalytic amounts of Rh₂(OAc)₄, a smooth reaction under N₂ evolution afforded a mixture of thiiranedicarboxylate 5 and (diphenylmethylidene)malonate 6 (Scheme 2). A reaction mechanism via an intermediate ‘thiocarbonyl ylide’ 7 , formed by the addition of the carbenoid species 8 to the S-atom of 2a , is plausible. Similar reactions were carried out with 9H-xanthene-9-thione ( 2b ), 9H-thioxanthene-9-thione ( 2c , Scheme 4), and 1,3-thiazole-5(4H)-thione 18 (Scheme 6). In the cases of 2b and 2c , spirocyclic 1,3-dithiolanetetracarboxylates 14a and 14b , respectively, were obtained as the third product. Reaction mechanisms for their formation are proposed in Scheme 5: S-transfer from intermediate thiirane 12 to the carbenoid species yielded thioxomalonate 15 which underwent a 1,3-dipolar cycloaddition with ‘thiocarbonyl ylide’ 16 . An alternative is the formation of ‘thiocarbonyl ylide’ 17 via carbene addition to 15 , followed by 1,3-dipolar cycloaddition with 2b and 2c , respectively.     

DFT investigation on mechanism of dirhodium tetracarboxylate-catalyzed O-H insertion of diazo compounds with H2O

The mechanism of the dirhodium tetracarboxylate-catalyzed O-H insertion reaction of diazomethane and methyl diazoacetate with H₂O has been studied in detail using DFT calculations. The rhodium catalyst and a diazo compound couple to form a rhodiumcarbene complex. Of two reaction pathways of the Rh(II)-carbene complex with H₂O, the stepwise pathway is more preferable than the concerted one. Formation of a Rh(II) complex-associated oxonium ylide is an exothermal process, and direct decomposition of the ylide gives a very high barrier. The high barriers for the 1,2-H shift of Rh(II) complex-associated oxonium ylides make the ylides become stable intermediates in both reactions, especially for the reactions in solution. Difficulty in formation of a free oxonium ylide supports experimental results, indicating that the Rh(II) complex-catalyzed nucleophilic addition of a diazo compound proceeds via a Rh(II) complex-associated oxonium ylide rather than via a free oxonium ylide.     

Polymerization of methyl acrylate with triphenylbismuthonium 1,2,3,4‐tetraphenylcyclopentadienylide as a new radical initiator

Triphenylbismuthonium 1,2,3,4‐tetraphenylcyclopentadienylide in 1,4‐dioxan initiated radical polymerization of methyl acrylate to ～30% conversion without gelation because of autoacceleration. The polymer had a viscosity‐average molecular weight of 200,000. The kinetic expression was R_pα[I]^0.3[M]^1.16, that is, the system followed nonideal kinetics because of primary radical termination and degradative chain‐transfer reactions. The values of kk_t and the energy of activation were computed as 3.12 × 10^?5 Lmol^?1s^?1 and 28 kJ/mol, respectively. The ylide dissociated to form a phenyl radical, which brought about polymerization of methyl acrylate. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2060–2065, 2004     

Mass spectrometric studies of platinum(II) complexes of carbonyl-stabilized arsonium ylides

A fast atom bombardment (FAB) mass spectrometric study was carried out on the two O-coordinated carbonyl-stabilized arsonium ylide Pt(II) complexes {(dppe)PtCI[OC(R)C(H)AsPh₃]}BF₄ ((dppe) = Ph₂PCH₂CH₂Ph₂; R = CH₃ (1), OCH₃ (3)) and on the two corresponding C-coordinated isomers {(dppe)PtCl[Ph₃AsC(H)COR]}BF₄ (R = CH₃ (2), OCH₃ (4)). The mass spectral analysis of complexes 1 and 2 reveals that it is possible to distinguish the two isomeric forms mainly on the basis of the relative abundance of the protonated triphenylarsine oxide at m/z 323 while the different coordination modes of the ylide in complexes 3 and 4 are evidenced by the different fragmentation pathways of these two derivative;. Further, the reaction between [(dppe)PtCl]₂(BF₄)₂ and the appropriate ylide performed under FAB conditions indicates that in both cases the first complex formed is the C-coordinated isomer, in agreement with that observed in the condensed phase.     

Radical copolymerization of fullerene (C60) and n‐butyl methacrylate (BMA) using triphenylbismuthonium ylide and characterization of C60–BMA copolymers

Radical copolymerization of fullerene (C₆₀) and n‐butyl methacrylate (BMA) has been carried out using triphenylbismuthonium ylide as an initiator at 70°C for 4 h in a dilatometer under nitrogen atmosphere. The kinetic expression of the polymerization is R_pα [Ylide]^0.5[C₆₀]^?1.0[BMA]^1.2, which is similar to that expected for ideal kinetics. The rate of polymerization increases with an increase in the concentration of initiator and BMA. However, it decreases with an increase in the concentration of fullerene. Fullerene acts as radical scavengers causing retardation in polymerization. The activation energy of copolymerization was estimated to be 72.2 K J mol^?1. The fullerene‐containing BMA copolymers were characterized by FTIR, ¹H NMR, ¹³C NMR, UV–vis, and GPC analyses. © 2011 Wiley Periodicals, Inc. Int J Chem Kinet 43: 608–619, 2011     

A Fairly Stable Crystalline Silanone

Silanones 2 substituted by bulky amino‐ and phosphonium ylide substituents have been synthesized and isolated in crystalline form. Thanks to the steric protection and the strong electron‐donating ability of the substituents, silanones 2 are persistent and only slowly dimerizes at room temperature (t _1/2=0.5 or 5 h). Structural and theoretical analysis of 2 indicate a short Si=O bond (1.533 Å) and an enhanced polarization toward the O atom compared to Me₂Si=O owing to the strong π‐electron donation from the phosphonium ylide substituent.     

Thermal latency and structure–activity relationship of aminimides in the polymerization of epoxide

1,1-Dimethyl-1-(2-hydroxypropyl)amine p-substituted benzimide (“aminimide”) derivatives were prepared by the reaction of p-substituted methyl benzoates with equimolar amounts of 1,1-dimethylhydrazine and propylene oxide. These ylide compounds are shown to be useful as thermally latent initiators for the polymerization of glycidyl phenyl ether (GPE). Bulk polymerization of GPE with 3 mol % of these aminimides was carried out at 40–150°C for 8 h, showing ≥ 100°C was required for an effective rate. No consumption of the monomer could be observed at temperatures lower than 80°C. p-Methoxy substituted 1 showed the largest thermal latency among four aminimides tested. The activities of the aminimides increased with an increase of electron-donating ability of the substituents on the benzene ring, according to the following order: 1 (p-MeO) > 2 (p-Me) > 3 (H) > 4 (p-NO₂). © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 689–694, 1997     

3‐(Triphenyl­phospho­ranyl­idene)pentane‐2,4‐dione and dieth­yl 2‐(triphenyl­phospho­ranyl­idene)malonate

The title ylides, 3‐(triphenyl­phospho­ranyl­idene)pentane‐2,4‐dione, C₂₃H₂₁O₂P, (I), and diethyl 2‐(triphenyl­phospho­ranyl­idene)malonate, C₂₅H₂₅O₄P, (II), differ in the conformations adopted by their extended ylide moieties. In (I), one carbonyl O atom is syn and the other is anti with respect to the P atom, the ylide group is nearly planar, with a maximum P—C—(C=O) angle of 18.2 (2)°, and the P—C, C—C and C=O bond lengths are consistent with electronic delocalization involving the O atoms. In (II), both carbonyl O atoms are anti and the ester groups are twisted out of the plane of the near trigonal ylide C atom, reducing delocalization, the largest P—C—(C=O) angle being 30.2 (2)°.     

Selenophen‐2‐yl‐Substituted Thiocarbonyl Ylides – at the Borderline of Dipolar and Biradical Reactivity

The reactions of aryl (selenophen‐2‐yl) thioketones with CH₂N₂ occur with spontaneous elimination of N₂, even at low temperature (?65°), to give regioselectively sterically crowded 4,4,5,5‐tetrasubstituted 1,3‐dithiolanes and/or a novel type of twelve‐membered dithia‐diselena heterocycles as dimers of the transient thiocarbonyl S‐methanides. The ratio of these products depends on the type of substituent located at C(4) of the phenyl ring. Whereas the formation of the 1,3‐dithiolanes corresponds to a [3+2] cycloaddition of an intermediate thiocarbonyl ylide with the starting thioketone, the twelve‐memberd ring has to be formed via dimerization of the ‘thiocarbonyl ylide’ with an extended biradical structure.     

Reatarding effect of nitrogen ylide for the polymerization of N-vinyl pyrrolidone

-Picolinium-p-chlorophenacylide (-PCFY) acts as a retarder for polymerization of N-vinyl pyrrolidone. The polymerization runs were carried out at 60°C using benzene as an inert solvent. The kinetic equation for the present system may be written asR _p [-PCPY]^–1.0 [AIBN]^0.66[N-VP]^1.0. The value of overall energy of activation for polymerization in presence and absence of-PCPY was computed as 44.0 and 42.3 kJ mol^–1, respectively. The inverse relationship ofR _p and¯M _v with-PCPY suggests that-PCPY acts as a polymerization retarder. The retarding effect is also evidenced by higher initiator exponent value and higher value of energy of activation in presence of ylide. A mechanism is also proposed in which polymer propagating chain combines with one ylide component to give resonance stabilized radical.     

New aromatizational transformations of 4-methyl-4-trichloromethyl-substituted 2,5-cyclohexadiene triphenylphosphonium and pyridinium ylides: Abstraction or 1,6-migration of the CCl3 group

4-methyl-4-trichloromethylcyclohexadiene triphenylphosphonium ylide obtained by treatment of (1-methyl-1-tricholoromethylcyclohexa-2,4-dien-4-yl)-triphenylphosphonium bromide with BuⁿLi in THF is stabilized by the abstraction of the CCl₃ group to give (p-tolyl)triphenylphosphonium cation, which was isolated as the corresponding hydroxide. Conversely, an analogous pyridinium ylide, obtained by treatment ofZ/E stereoizomericN-(1-methyl-1-trichloromethylcyclohexa-2,5-dien-4-yl)pyridiunium bromide with a base (piperidine in CD₂Cl₂, BuⁿLi in THF), at temperatures above −40 °C, undergoes a novel high-yield aromatizational skeletal rearrangement with migration of the CCl₃ group to position 2 of the heterocycle. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 386–388, February, 1997.