Generation of Photocurrent by Visible‐Light Irradiation of Conjugated Dawson Polyoxophosphovanadotungstate–Porphyrin Copolymers

Four hybrid polyoxometalate–porphyrin copolymer films were obtained by the electrooxidation of zinc octaethylporphyrin in the presence of four different Dawson‐type polyoxometalates bearing two pyridyl groups (POM(py)₂) with various spacers. The POM monomers were designed around 1,3,5‐trisubstituted benzene rings. Two of the substituents of the benzene ring are linked to the pyridyl groups, and the third is connected to the POM subunit. The four monomers vary in the relative positions of the nitrogen atoms of the pyridine rings or in the distance from the carbonyl group. The monomers were fully characterized by ¹H, ³¹P, and ¹³C NMR spectroscopy, electrospray mass spectrometry, IR and UV/Vis spectroscopy, and electrochemistry. The copolymers were characterized by UV/Vis spectroscopy, X‐ray photoelectron spectroscopy, electrochemistry, and AFM. Their photovoltaic performance under visible light irradiation was investigated by photocurrent transient measurements under visible illumination.     

Microwave‐Assisted Synthesis and Physicochemical Characterization of Tetrafuranylporphyrin‐Grafted Reduced‐Graphene Oxide

This work describes the design of a modified porphyrin that bears four furan rings linked by 1,2‐bis‐(2‐aminoethoxy)ethane spacers. This unit is a well‐suited scaffold for a Diels–Alder reaction with commercial reduced‐graphene oxide, which is also described in this paper. A new hybrid material is obtained, thanks to efficient grafting under microwave irradiation, and fully characterized in terms of structure (UV, TGA, Raman) and morphology (HR‐TEM and AFM). Potential applications in photo‐ and sonodynamic therapy are envisaged.     

Vesicle Formation from an Amphiphilic Porphyrin Derivative at the Air–Water Interface

A tetraphenyl porphyrin derivative with two C₁₆ alkyl chains covalently bound to each of the four peripheral phenyl rings through ether linkages formed multilayer clusters or vesicles at the air–water surface. More interestingly, spherical vesicles were also formed when deposited on appropriate solid surfaces, and these vesicles were stable even in dry conditions. Various microscopic images of the cast film deposited on a mica surface confirmed closed‐ended nanotube/nanorod‐type formation with necking and bulging. These narrow tubes are proposed to be intermediates for the formation of vesicles by fission at either side of the bulge. Such vesicular formation is not common when either cast or Langmuir–Blodgett films were deposited on a solid surface.     

Dicyanopyrazine-linked porphyrin Langmuir-Blodgett films

We investigated the influence of arachidic acid/cadmium dication (AA/Cd(2+)) as a transfer promoter for the deposition of dicyanopyrazine-linked porphyrin (2-DCPP) Langmuir-Blodgett (LB) films on both hydrophobic and hydrophilic substrates. In the case of LB deposition on a hydrophilic substrate, the presence of AA/Cd(2+) does not improve 2-DCPP LB deposition. The poor transfer in the case of the hydrophilic surface is believed to be due to 2-DCPP not wetting the surface during the down-stroke deposition, and this is not improved by the transfer agent. However, on a hydrophobic substrate, deposition of 2-DCPP is significantly improved by the presence of AA/Cd(2+). Comparison of the UV-visible spectrum of a 2-DCPP LB film with that of 2-DCCP dissolved in chloroform reveals that the Soret and Q bands for the 2-DCPP LB film are broadened and red-shifted due to aggregation of porphyrin rings in the LB film. UV-visible spectral changes and ellipsometry as a function of the number of deposition layers suggest continuous transfer of 2-DCPP/AA onto the hydrophobic substrate and reproducibility in the deposition process. The Soret and Q bands of the 2-DCPP LB film upon acid vapor exposure have also been investigated, and these measurements may have chemical sensor applications.     

The NMR spectra of porphyrins 20—proton and 13C characterization of porphyrin atropisomers

The preparation, isolation and characterization by proton and ¹³C NMR of the four possible atropisomers of meso-tetra(2-methoxy-1-naphthyl)porphyrin is described. Chemical shift differences due to atropisomerization effects are observed in the porphyrin and naphthyl rings. Comparison of the naphthyl chemical shifts with those of the model compound 1-isopropenyl-2-methoxynaphthalene allows the shifts due to the porphyrin ring current to be isolated. The observed Δδ values of the naphthyl protons agree well with those calculated from the previously described porphyrin ring current model, and allow both the angle of tilt of the naphthyl ring and the dihedral angle of the 2-methoxy substituent to be estimated. In contrast, the Δδ values for the naphthyl carbons bear no relationship to the calculated ring current shifts. Calculations of the total ring current contribution (porphyrin plus naphthyl rings) at the different naphthyl rings of the unsymmetric type III isomer show that at least part of the observed atropisomerism effects are due to the long-range current shifts of the naphthyl rings. The results also provide a clear demonstration of the identity of the porphyrin ring current in the free base and porphyrin dication.     

Synthesis and Aggregation Behavior of meso‐Sulfinylporphyrins: Evaluation of S‐Chirality Effects on the Self‐Organization to S–Oxo‐Tethered Cofacial Porphyrin Dimers

The synthesis and aggregation behavior of meso‐sulfinylporphyrins are described. The copper‐catalyzed C–S cross‐coupling reaction of a meso‐iodoporphyrin with benzenethiol and n‐octanethiol has proved to be an efficient method for the synthesis of meso‐sulfanylporphyrins, which are oxygenated by m‐chloroperbenzoic acid to produce the corresponding meso‐sulfinylporphyrins. Optically active zinc meso‐sulfinylporphyrins were successfully isolated by means of optical resolution of the racemates on a chiral HPLC column. Zinc sulfinylporphyrins readily undergo self‐organization through S–oxo–zinc coordination to form cofacial porphyrin dimers in solution, in which the hetero‐ and homodimers are present as a diastereomeric mixture. The aggregation modes of the S–oxo‐tethered porphyrin dimers were fully characterized by ¹H NMR, IR, and UV/Vis spectroscopy as well as DFT calculations on their model compounds, thus revealing that the self‐aggregation behavior depends on the combination of S chirality. The absolute configurations at the sulfur center can be determined by the exciton‐coupled CD method. The observed self‐association constant for the S–oxo‐tethered dimerization of (S)‐phenylsulfinylporphyrin in toluene is larger than that in dichloromethane, which reflects the difference in dipole moments between the homodimer and the monomer. In cyclic and differential pulse voltammetry, the first oxidation process of the cofacial dimers is split into two reversible steps, which indicates that the initially produced π radical cations are delocalized efficiently between the two porphyrin rings. The present findings demonstrate the potential utility of meso‐sulfinyl groups as promising ligands for investigating the effects of peripheral chirality on the structures and optical and electrochemical properties of metal‐assisted porphyrin self‐assemblies.     

Porphyrinylboranes Synthesized via Porphyrinyllithiums

As the most nucleophilic porphyrins, meso‐ or β‐lithiated porphyrins were generated by iodine–lithium exchange reactions of the corresponding iodoporphyrins with n‐butyllithium at ?98 °C. Porphyrinyllithiums thus prepared were used for synthesis of dimesitylporphyrinylboranes through reactions with fluorodimesitylborane. The boryl groups proved to serve as an electron‐accepting unit to alter the photophysical and electrochemical properties. In addition, 5‐diarylamino‐15‐dimesitylboryl‐substituted donor–accepter porphyrins showed increased intramolecular charge‐transfer character in the S₁ state. Furthermore, the reaction of β‐lithiated porphyrin with dichloromesitylborane provided a boron‐bridged porphyrin dimer, which exhibited a conjugative interaction between two porphyrin units through the vacant p‐orbital on the boron center.     

Ion‐Pairing Assemblies of Porphyrin–AuIII Complexes in Combination with π‐Electronic Receptor–Anion Complexes

Anion complexes of anion‐responsive π‐electronic molecules can behave as pseudo π‐electronic anions providing various ion pairs in combination with countercations. In this study, single crystals of ion‐pairing assemblies comprising porphyrin–Au^III complexes and Cl^? complexes of dipyrrolyldiketone BF₂ complexes were prepared from 1:1 mixtures of anion receptors and the Cl^? salts of cationic porphyrins in solution. In the solid state, the ion pairs formed characteristic assemblies, depending on the substituents of the anion receptors and porphyrin–Au^III complexes. Theoretical calculations on the ion pairs revealed that the stacking structures are stabilized by compensating positive and negative charges as well as π–π interactions.     

van der Waals interactions are critical in Car–Parrinello molecular dynamics simulations of porphyrin–fullerene dyads

The interplay between electrostatic and van der Waals (vdW) interactions in porphyrin‐C₆₀ dyads is still under debate despite its importance in influencing the structural characteristics of such complexes considered for various applications in molecular photovoltaics. In this article, we sample the conformational space of a porphyrin‐C₆₀ dyad using Car–Parrinello molecular dynamics simulations with and without empirical vdW corrections. Long‐range vdW interactions, which are poorly described by the commonly used density functional theory functionals, prove to be essential for a proper dynamics of the dyad moieties. Inclusion of vdW corrections brings porphyrin and C₆₀ close together in an orientation that is in agreement with experimental observations. The structural differences arising from the vdW corrections are shown to be significant for several properties and potentially less important for others. Additionally, our Mulliken population analysis reveals that contrary to the common belief, porphyrin is not the primary electron donating moiety for C₆₀. In the considered dyad, fullerene's affinity for electrons is primarily satisfied by charge transfer from the amide group of the linker. However, we show that in the absence of another suitable bound donor, C₆₀ can withdraw electrons from porphyrin if it is sufficiently close. © 2015 Wiley Periodicals, Inc.     

Porphyrin/Quinoidal-Bithiophene-Based Macrocycles and Their Dications: Template-Free Synthesis and Global Aromaticity

We report the template-free synthesis and characterization of a new type of porphyrin/quinoidal-bithiophene-based conjugated macrocycle. X-ray crystallographic analysis of the dimer ( 2MC ) revealed a cyclophane-like geometry with large dihedral angles between the porphyrin and the neighboring thiophene rings, and NMR measurements and theoretical calculations confirmed a localized aromatic character of the porphyrin/thiophene rings and quinoidal character of the bithiophene linkers. Restricted rotation of the thiophene rings linked to the porphyrin unit was observed by variable-temperature NMR measurements. The dication ( 2MC²⁺ ) adopts a chair-shaped conformation to facilitate π-electron delocalization around the whole macrocycle. As a result, the molecule is globally aromatic, with a dominant 54 π conjugation pathway. The trimer ( 3MC ) also shows localized aromatic character of porphyrin rings and conformational flexibility, but its dication ( 3MC²⁺ ) is rigid and globally aromatic with a dominant 82 π conjugation pathway.     

Raman and UV-visible absorption spectra of ion-paired aggregates of copper porphyrins

Raman and UV-visible absorption spectra of ion-paired aggregate constructed from two copper porphyrins, copper tetrakis(4-N-methylpyridyl)porphyrin (CuTMPyP) and copper tetrakis(4-sulfonatophenyl)pophyrin (CuTSPP), are reported in this paper. The absorption bands of the aggregate was found exhibiting obvious shift and broadening, which are attributed to the excitonic coupling between the two paired porphyrin rings. The excitonic coupling in the aggregates also induces evident alteration for Raman intensities compared with monomer spectrum. Aggregation results in only small shifts (2-3 cm(-1)) for Raman lines connecting with the vibrations of porphyrin rings, manifesting only slight structural change of porphyrin skeletons. On the other hand, evident downshift (5 cm(-1)) was observed for the Cm-pyridyl stretch mode (1254 cm(-1)) of CuTMPyP, suggesting weakening of the Cm-pyridyl bonds by aggregation. Raman depolarization ratios of the aggregates are different from those of the monomers, implying a lowering of effective symmetry due to the molecular packing in the aggregates.     

Design and Synthesis of Perpendicularly Connected Metal Porphyrin–Imide Dyads for Two‐Terminal Wired Single Molecular Diodes

Four different porphyrin–imide dyads bearing different central metals (zinc or rhodium) and different substituents on the porphyrin macrocycles (tert‐butyl or methoxy) were synthesized for single molecular diode measurements. The molecules were designed to separate the donor component (porphyrin) from the acceptor component (imide) by bonding in a perpendicular arrangement, thus enhancing the rectification properties. UV/Vis absorption spectra and density functional theory calculations showed that the design was successful and that the molecular orbitals of the dyads were the summation of the two components, with minimal interaction between them. The effect of the central metal was found to be significant, with the lowest energy absorption for the zinc dyads being attributed to the mixed state of charge transfer from porphyrin to imide and the Q band, whereas that of the rhodium dyads indicated insignificant charge‐transfer character.     

Porphyrin/Quinoidal‐Bithiophene‐Based Macrocycles and Their Dications: Template‐Free Synthesis and Global Aromaticity

We report the template‐free synthesis and characterization of a new type of porphyrin/quinoidal‐bithiophene‐based conjugated macrocycle. X‐ray crystallographic analysis of the dimer ( 2MC ) revealed a cyclophane‐like geometry with large dihedral angles between the porphyrin and the neighboring thiophene rings, and NMR measurements and theoretical calculations confirmed a localized aromatic character of the porphyrin/thiophene rings and quinoidal character of the bithiophene linkers. Restricted rotation of the thiophene rings linked to the porphyrin unit was observed by variable‐temperature NMR measurements. The dication ( 2MC²⁺ ) adopts a chair‐shaped conformation to facilitate π‐electron delocalization around the whole macrocycle. As a result, the molecule is globally aromatic, with a dominant 54 π conjugation pathway. The trimer ( 3MC ) also shows localized aromatic character of porphyrin rings and conformational flexibility, but its dication ( 3MC²⁺ ) is rigid and globally aromatic with a dominant 82 π conjugation pathway.     

Highly Pure Synthesis,Spectral Assignments,and Two‐Photon Properties of Cruciform Porphyrin Pentamers Fused with Benzene Units

Tetrameric porphyrin formation of 2‐hydroxymethylpyrrole fused with porphyrins through a bicyclo[2.2.2]octadiene unit gave bicyclo[2.2.2]octadiene‐fused porphyrin pentamers. Thermal conversion of the pentamers gave fully π‐conjugated cruciform porphyrin pentamers fused with benzene units in quantitative yields. UV/Vis spectra of fully π‐conjugated porphyrin pentamers showed one very strong Q absorption and were quite different from those of usual porphyrins. From TD‐DFT calculations, the HOMO level is 0.49 eV higher than the HOMO?1 level. The LUMO and LUMO+1 levels are very close and are lower by more than 0.27 eV than those of other unoccupied MOs. The strong Q absorption was interpreted as two mutually orthogonal single‐electron transitions (683 nm: 86 %, HOMO→LUMO; 680 nm: 86 %, HOMO→LUMO+1). The two‐photon absorption (TPA) cross section value (σ⁽²⁾) of the benzene‐fused porphyrin pentamer was estimated to be 3900 GM at 1500 nm, which is strongly correlated with a cruciform molecular structure with multidirectional π‐conjugation pathways.     

镨叶绿素a分子结构的确定

通过合成镨叶绿素a(Pr-Chla)研究了稀土在叶绿素中的结合方式.Pr-Chla的紫外可见光谱(UV-Vis)、红外光谱(FTIR)证实镨离子已配位到叶绿素a的卟啉环上.其磁圆二色谱(MCD)在Soret带具有双层夹心卟啉的特征结构;通过扩展X射线吸收精细结构谱(EXAFS),采用双层夹心结构模型拟合,确定了Pr周围的近邻结构.表明合成镨叶绿素a具有双层夹心结构.Pr(Ⅲ)夹于两个卟啉环之间,与上下卟啉环上共8个N原子配位,Pr-N键平均键长0.242nm.     

Unusual Stabilization of Dication Diradical Intermediate of Dizinc(II) Porphyrin Dimer

We have demonstrated here how the nature of a metal ion controls the reactivity of a metalloporphyrin π‐cation radical. One‐electron oxidations of diethylpyrrole‐bridged dicopper(II) and dipalladium(II) porphyrin dimers using iodine as an oxidant result in the formation of strongly interacting cofacial mixed‐valent π‐cation radical dimers. The mixed‐valent cation radical so generated being highly reactive drives a spontaneous and rapid transformation to form an indolizinium‐fused chlorin‐porphyrin heterodimer. In sharp contrast to this, similar addition of iodine leads to 1e‐oxidation of dizinc(II) porphyrin dimer, which is followed by a second oxidation to produce a dication diradical complex. The axial coordination of iodine upon 1e‐oxidation of dizinc(II) porphyrin dimer lowers the overall oxidation potential of the system, and thereby, making the second oxidation easily accessible. This has resulted in the stabilization of a dication diradical complex, in which two porphyrin π‐cation radicals undergo electronic communication through the bridging pyrrole group. Interestingly, despite being well‐separated from each other, the two radical spins undergo strong antiferromagnetic coupling to form a diamagnetic compound. The conjugation also leads to a change in identity of the bridge, which further highlights the critical role played by the bridge in the electronic communication between the two rings. DFT calculations clearly support the experimental observations.     

Effects of porphyrin substituents on film structure and photoelectrochemical properties of porphyrin/fullerene composite clusters electrophoretically deposited on nanostructured SnO2 electrodes

We have systematically examined the substituent effects of meso-tetraphenylporphyrins on film structures and the photoelectrochemical properties of the composite clusters of free-base porphyrin and C(60) electrophoretically deposited on nanostructured SnO(2) electrodes. The photocurrent generation efficiency was found to correlate with the complexation ability of the porphyrin for C(60). Basically, the incident photon-to-current efficiency (IPCE) value was increased with increasing relative amounts of the porphyrin versus C(60) in the films. The unique molecular arrangement of the porphyrin with the simple, specific substituents (i.e., methoxy groups at the meta-positions of the meso-phenyl rings of tetraphenylporphyrins (3,5-OMeTPP; TPP=tetraphenylporphyrin)) and C(60) on SnO(2) electrodes resulted in the largest IPCE value (ca. 60 %) among this type of photoelectrochemical device. The rapid formation of the composite clusters and microcrystals from the combination of 3,5-OMeTPP and C(60) in a mixed solvent is unique as the association is accelerated by intermolecular interactions (i.e., hydrogen-bonding and CH-pi interactions) between the methoxy groups of the porphyrins and the porphyrin/C(60), in addition to the pi-pi interactions between the porphyrins/C(60) and C(60) molecules. Both the films and single crystals composed of the porphyrin and C(60) exhibited remarkably high electron mobility (7x10(-2) and 0.4 cm(2) V(-1) s(-1)), which is comparable to the value for highly efficient bulk heterojunction solar cells. Our experimental results have successfully demonstrated the importance of nanostructured electron- and hole-transporting pathways in bulk heterojunction solar cells. Such a finding will provide basic and valuable information on the design of molecular photovoltaics at the molecular level.     

A comparative study of O2, CO,and NO binding to iron–porphyrin

Minimum-energy structures of O₂, CO, and NO iron–porphyrin (FeP) complexes, computed with the Car–Parrinello molecular dynamics, agree well with the available experimental data for synthetic heme models. The diatomic molecule induces a 0.3–0.4 Å displacement of the Fe atom out of the porphyrin nitrogen (N_p) plane and a doming of the overall porphyrin ring. The energy of the iron–diatomic bond increases in the order Fe(SINGLE BOND)O₂ (9 kcal/mol) < Fe(SINGLE BOND)CO (26 kcal/mol) < Fe(SINGLE BOND)NO (35 kcal/mol). The presence of an imidazole axial ligand increases the strength of the Fe(SINGLE BOND)O₂ and Fe(SINGLE BOND)CO bonds (15 and 35 kcal/mol, respectively), with few structural changes with respect to the FeP(CO) and FeP(O₂) complexes. In contrast, the imidazole ligand does not affect the energy of the Fe(SINGLE BOND)NO bond, but induces significant structural changes with respect to the FeP(NO) complex. Similar variations in the iron–imidazole bond with respect to the addition of CO, O₂, and NO are also discussed. © 1998 John Wiley & Sons, Inc. Int J Quant Chem 69: 31–35, 1998     

A Flexible Copper(I)‐Complexed [4]Rotaxane Containing Two Face‐to‐Face Porphyrinic Plates that Behaves as a Distensible Receptor

A new cyclic [4]rotaxane composed of two flexible bis‐macrocycles and two rigid axles is described. Each bis‐macrocycle consists of two rings attached to antipodal meso positions of a central Zn porphyrin through single C? C bonds. Each ring incorporates a 2,9‐diphenyl‐1,10‐phenanthroline chelation site. The axles contain two coplanar bidentate sites derived from the 2,2′‐bipyridine motif. The building blocks were assembled by using a one‐pot threading‐and‐stoppering reaction, which afforded the [4]rotaxane in 50 % yield. The “gathering‐and‐threading” effect of copper(I) was utilised in the formation of a [4]pseudorotaxane, which was immediately converted to the corresponding [4]rotaxane by a quadruple CuAAC stoppering reaction. The rotaxane contains two face‐to‐face zinc porphyrins, which allowed the coordination of ditopic guest substrates. The rotaxane host showed remarkable flexibility and was able to adjust its conformation to the guest size. It can be distended and accommodate rod‐like guests of 2.6 to 15.8 Å in length.     

叶绿素稀土配位结构的EXAFS研究: 镧叶绿素a双层夹心分子 结构的确认

通过合成镧叶绿素a(La-Chla),研究稀土在叶绿素中的赋存状态。La-Chla的紫外可见光谱(UV-vis)、红外光谱(FT-IR)证实,镧离子已配位到叶绿素a的卟啉环上。其磁圆二色谱(MCD)在Soret带具有双层夹心卟啉结构的特征结构。通过扩展X射线吸收精细结构谱(EXAFS),采用双层夹心结构模型拟合,确定La周围的近邻结构,取得满意结果。表明合成镧叶绿素a具有双层夹心结构。La夹于两个卟啉环之间,与上下卟啉环上共八个N原子配位,La-N平均键长0.261nm。