Synthesis and characterization of new soluble polyesters derived from various cardo bisphenols by solution polycondensation

A series of new polyesters was prepared from terephthaloyl (or isophthaloyl) chloride acid with various cardo bisphenols on solution polycondensation in nitrobenzene using pyridine as hydrogen chloride quencher at 150 °C. These polyesters were produced with inherent viscosities of 0.32–0.49 dL · g⁻¹. Most of these polyesters exhibited excellent solubility in a variety of solvents such as N,N‐dimethylformamide, tetrahydrofuran, tetrachloroethane, dimethyl sulfoxide, N,N‐dimethylacetamide, N‐methyl‐2‐pyrrolidinone, m‐cresol, and o‐chlorophenol. The polyesters containing cardo groups including diphenylmethylene, tricyclo[5.2.1.0^2,6]decyl, tert‐butylcyclohexyl, phenylcyclohexyl, and cyclododecyl groups exhibited better solubility than bisphenol A–based polyesters. These polymers showed glass transition temperatures (T_g's) between 185 °C and 243 °C and decomposition temperatures at 10% weight loss ranging from 406 °C to 472 °C in nitrogen. These cardo polyesters exhibited higher T_g's and better solubility than bisphenol A‐based polyesters. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4451–4456, 2000     

Preparation and properties of polyesters derived from 4,4′-sulfonyl dibenzoyl chloride by solution polycondensation

Sulfone-containing polyesters of 18 kinds having inherent viscosities of 1.19–0.16 dL g⁻¹ were prepared derived from 4,4′-sulfonyl dibenzoyl chloride by solution polycondensation from various aromatic and aliphatic diols in nitrobenzene at 82°C. The polyesters were examined with IR spectra, inherent viscosity, x-ray diffraction, solubility, DSC, and TGA. Polyester (PE-7) with the greatest inherent viscosity may reflect that bisphenol A having a electron-releasing group increases nucleophilic properties of the phenolate anion. Diols such as bisphenol AF (PE-13) and brominated diols (PE-4, PE-10, and PE-16) gave less favorable results. The diffractograms showed that all polyesters were essentially amorphous except that obtained from bisphenol S and its derivatives. Almost all polyesters except PE-1 and PE-2 were soluble in DMF, THF, tetrachloroethane and phenol/sym-tetrachloroethane (60/40 by mass) but insoluble in typical organic solvents such as acetone, toluene, and chloroform. These polymers obtained from aromatic bisphenols lost no mass below 309°C, but 10% loss of mass was recorded above 380°C in nitrogen. © 1996 John Wiley & Sons, Inc.     

Poly(ether sulfone)s using a rigid dibenzothiophene dioxide heterocycle

Poly(aryl ether)s were prepared by nucleophilic aromatic substitution using conformationally restricted dichloro‐ and difluorodibenzothiophene dioxide heterocyclic monomers with bisphenol A or bisphenol AF. The heterocyclic monomers were prepared from the bis(4‐halophenyl) sulfones in two steps via lithiation followed by copper catalyzed intramolecular coupling and characterized by ¹H, ¹³C, ¹⁹F NMR spectroscopy and GC/MS. Reactivity of the fluorine containing monomer was examined using semi‐empirical methods and NMR spectroscopy measurements and found to be potentially more reactive than bis(4‐fluorophenyl) sulfone, even with a conformationally locked sulfone as the electron withdrawing group. Successful polymerizations of both the fluorine and chlorine containing monomers with bisphenol A and bisphenol AF nucleophiles were accomplished, providing polymers with number average molecular weights of approximately 45 kg/mol (difluoro monomer) and 10–20 kg/mol (dichloro monomer). The polymers exhibited high T_gs ranging from 238 to 256 °C and displayed good thermal stability with 5% degradation temperatures in air from 453–510 °C, depending on molecular weight and bisphenol composition. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3127–3131     

Design and Synthesis of Aromatic Polyesters Bearing Pendant Clickable Maleimide Groups

A bisphenol bearing pendant maleimide group, namely, N‐maleimidoethyl‐3, 3‐bis(4‐hydroxyphenyl)‐1‐isobenzopyrrolidone (PPH‐MA) was synthesized starting from phenolphthalein. Aromatic (co)polyesters bearing pendant maleimide groups were synthesized from PPH‐MA and aromatic diacid chlorides, namely, isophthaloyl chloride (IPC), terephthaloyl chloride (TPC), and 50:50 mol % mixture of IPC and TPC by low temperature solution polycondensation technique. Copolyesters were also synthesized by polycondensation of different molar proportions of PPH‐MA and bisphenol A with IPC. Inherent viscosities and number‐average molecular weights of aromatic (co)polyesters were in the range of 0.52–0.97 dL/g and 20,200–32,800 g/mol, respectively indicating formation of medium to reasonably high‐molecular‐weight polymers. ¹³C NMR spectral analysis of copolyesters revealed the formation of random copolymers. The 10% weight loss temperature of (co)polyesters was found in the range 470–484 °C, indicating their good thermal stability. A selected aromatic polyester bearing pendant maleimide groups was chemically modified via thiol‐maleimide Michael addition reaction with two representative thiol compounds, namely, 4‐chlorothiophenol and 1‐adamantanethiol to yield post‐modified polymers in a quantitative manner. Additionally, it was demonstrated that polyester containing pendant maleimide groups could be used to form insoluble crosslinked gel in the presence of a multifunctional thiol crosslinker. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 630–640     

A new cardo bisphenol monomer containing pendant azido group and the resulting aromatic polyesters

Expanding on our strategy to synthesize aromatic step‐growth polymers containing pendant clickable azido groups via functional monomer approach, we have now designed and synthesized a new cardo bisphenol, viz., 2‐(2‐azidoethyl)‐3, 3‐bis(4‐hydroxyphenyl) isoindolin‐1‐one (PPH‐N₃). PPH‐N₃ was conveniently synthesized starting from commercially available phenolphthalein by a three‐step route in an overall yield of 65% using simple organic transformations. Aromatic (co)polyesters bearing pendant azido groups were synthesized by low‐temperature solution polycondensation of PPH‐N₃ or different molar ratios of PPH‐N₃ and bisphenol‐A (BPA) with aromatic diacid chlorides in dry dichloromethane in the presence of triethylamine (TEA) as a base. The formation of medium to reasonably high‐molecular‐weight (co)polyesters was evidenced from intrinsic viscosity and number‐average molecular‐weight measurements that were in the range 0.52–0.85 dL/g and 16,700–28,200, respectively. Tough, transparent, and flexible films could be cast from chloroform solutions of these (co)polyesters. (Co)polyesters were characterized using FTIR, ¹H NMR, ¹³C NMR spectroscopy, XRD, and TGA. The thermal curing reaction of (co)polyesters involving decomposition of azido groups was studied by DSC analysis. The chemical modification of a representative copolyester containing pendant azido groups was carried out quantitatively using catalyst‐free azide‐maleimide cycloaddition reaction with two maleimides, namely, N‐methylmaleimide and N‐hexylmaleimide. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1516–1526     

Soluble polyimides containing alicyclic structures

A series of novel aromatic diamines containing kinked cycloalkane structures between two phenyl rings were synthesized by HCl-catalyzed condensation reaction of excess aniline and corresponding cycloalkanone derivatives. The structures of the diamines were indentified by ¹H NMR, ¹³C NMR, FT-IR spectroscopy and elemental analysis. The polyimides were synthesized from the obtained diamines with various aromatic dianhydrides by one-step polymerization in m-cresol. The polymerization was conducted for 6∼8 h with refluxing, which was enough to obtain the polymers with high molecular weight. The inherent viscosities of the resulting polyimides were in the range of 0.37∼1.66 dl/g. All polymers were readily soluble in common organic solvents such as chloroform, tetrachloroethane, dimethylacetamide, etc. and the glass transition temperatures were observed at 290 to 372°C. UV-visible spectra were obtained to measure the transparency of polymer films. Most of the polymers showed high transmission above 90 % in the wavelength of 450 ∼ 600 nm.     

Highly branched aromatic polymers prepared by single step syntheses

Highly branched polyphenylenes, polyphenylene ethers, aromatic polyesters and polyamides synthesized from AB₂ type monomers are reviewed. Polyphenylenes were obtained by aryl-aryl coupling reactions of 3,5-dihalo-phenyl organometallic reagents. ¹³C NMR indicates about 70% branching efficiency. A T_gat 236°C was observed, but the polymer did not form films. Polyethers were prepared by oxidative coupling of 2,4,6-tribromophenol and 2,4-dibromophenol. The former monomer gave high molecular weight polymers but the latter monomer did not polymerize well. Condensation of 3,5-diaminobenzoic acid (I) and 3-aminoisophthalic acid derivatives in an amide solvent gave lyotropic hyperbranched aromatic polyamides. The GPC indicated a large degree of polymer aggregation in the amide solvent in the absence of a complexing salt.     

Synthesis and characterization of urethane polymers containing 2,2′-biimidazole

A heterocyclic nitrogen-containing system having substituent primary diol function, i.e., 1,1′-dihydroxethyl-2,2′-biimidazole ( I ), has been prepared and used to synthesize a series of new polyurethanes based on aromatic diisocyanates (TDI, MDI). Variation of solution polymerization parameters permitted the isolation and infrared, NMR, molecular weight, and thermal characterization of polymeric materials. Isolated polymers exhibit a linear structure and have T_g (150–170°C) and thermal stability (205–250°C for 20% weight loss) properties comparable to other typical urethane polymers. Zn²⁺ complexation was indicated by shifts in the imidazole ringmode infrared vibrational bands at 917 and 1133 cm^?1 to higher frequencies.     

Broad-line NMR and dynamic mechanical behavior of some aromatic polyesters

The dynamic mechanical properties of four aromatic polyesters were measured at temperatures in the 78–540°K region at 10³–10⁴ cps. The polymers studied were: poly(1,3 phenylene isophthalate), poly(1,4 phenylene terephthalate), poly(4,4′ diphenylene isophthalate), and poly(4,4′ diphenylene terephthalate). All four polymers had β loss peaks at about 280°K. Distinct β^* mechanical processes were found for the two terephthalate esters. Broad-line nuclear magnetic resonance measurements were carried out in the 150–440°K temperature range on the four polyesters mentioned above in addition to poly(4,4′ diphenylene 4,4′ biphenyl dicarboxylate). A change in NMR second moment takes place in the 190–330°K region, the magnitude of which is dependent on the polymer structure. The results are compared with those found for a series of aromatic polyamides and are discussed in terms of possible motional processes.     

Synthesis and Characterization of Diethyl Fumarate‐1,4‐Cyclohexanedimethanol Polyesters for Use in Bioresorbable Bone Cement Composites

Unsaturated polyesters are prepared by transesterification polymerization of diethyl fumarate and 1,4‐cyclohexanedimethanol. The structure of the polyesters was characterized by FT‐IR and ¹H‐ and ¹³C‐NMR spectroscopy. Semicrystalline morphology of the polymers is suggested by DSC analysis with T_g at 21°C and melting at 140°C. The thermogravimetric analysis indicated that the onset of degradation takes place at 300°C. The polyester's structure has significant impact on the properties of the composites prepared by crosslinking the fumarate double bonds with N‐vinyl pyrrolidone in the presence of an inorganic filler, calcium sulfate dihydrate, with the addition of a radical initiator, benzoyl peroxide, at ambient temperatures. The compressive strength and hydrolytic stability of the cement compositions was correlated with structure of the polyesters.     

Synthesis of periodic copolymers via ring‐opening copolymerizations of cyclic anhydrides with tetrahydrofuran using nonafluorobutanesulfonimide as an organic catalyst and subsequent transformation to aliphatic polyesters

To synthesize polyesters and periodic copolymers catalyzed by nonafluorobutanesulfonimide (Nf₂NH), we performed ring‐opening copolymerizations of cyclic anhydrides with tetrahydrofuran (THF) at 50–120 °C. At high temperature (100–120 °C), the cyclic anhydrides, such as succinic anhydride (SAn), glutaric anhydride (GAn), phthalic anhydride (PAn), maleic anhydride (MAn), and citraconic anhydride (CAn), copolymerized with THF via ring‐opening to produce polyesters (M_n = 0.8–6.8 × 10³, M_n/M_w = 2.03–3.51). Ether units were temporarily formed during this copolymerization and subsequently, the ether units were transformed into esters by chain transfer reaction, thus giving the corresponding polyester. On the other hand, at low temperature (25–50 °C), ring‐opening copolymerizations of the cyclic anhydrides with THF produced poly(ester‐ether) (M_n = 3.4–12.1 × 10³, M_w/M_n = 1.44–2.10). NMR and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectra revealed that when toluene (4 M) was used as a solvent, GAn reacted with THF (unit ratio: 1:2) to produce periodic copolymers (M_n = 5.9 × 10³, M_w/M_n = 2.10). We have also performed model reactions to delineate the mechanism by which periodic copolymers containing both ester and ether units were transformed into polyesters by raising the reaction temperature to 120 °C. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Thermally Crosslinkable and Chemically Modifiable Aromatic Polyesters Possessing Pendant Propargyloxy Groups

New aromatic (co)polyesters containing pendant propargyloxy groups were synthesized by phase transfer‐catalyzed interfacial polycondensation of 5‐(propargyloxy)isophthaloyl chloride (P‐IPC) and various compositions of P‐IPC and isophthaloyl chloride with bisphenol A. FTIR and NMR spectroscopic data, respectively, revealed successful incorporation of pendant propargyloxy groups into (co)polyesters and formation of (co)polyesters with desired compositions. (Co)polyesters exhibited good solubility in common organic solvents such as chloroform, dichloromethane, and tetrahydrofuran and could be cast into transparent, flexible, and tough films from chloroform solution. Inherent viscosities and number average molecular weights of (co)polyesters were in the range 0.77–1.33 dL/g and 43,600–118,000 g/mol, respectively, indicating the achievement of reasonably high‐molecular weights. The 10% weight loss temperatures of (co)polyesters were in the range 390–420 °C, demonstrating their good thermal stability. (Co)polyesters exhibited T_g in the range 146–170 °C and T_g values decreased with increase in mol % incorporation of P‐IPC. The study of non‐isothermal curing by DSC indicated thermal crosslinking of (co)polyesters via propargyloxy groups. The utility of pendant propargyloxy group was demonstrated by post‐modification of the selected copolyester with 1‐(4‐azidobutyl)pyrene, 9‐(azidomethyl)anthracene, and azido‐terminated poly(ethyleneglycol) monomethyl ether via copper(I)‐catalyzed Huisgen 1,3‐dipolar cycloaddition reaction. FTIR and ¹H NMR spectra confirmed that click reaction was quantitative. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 588–597     

Thianthrene as an activating group for the synthesis of poly(aryl ether thianthrene)s by nucleophilic aromatic substitution

A method for the preparation of poly(aryl ether thianthrene)s has been developed in which the aryl ether linkage is generated in the polymer‐forming reaction. The thianthrene heterocycle is sufficiently electron‐withdrawing to allow fluoro displacement with phenoxides by nucleophilic aromatic substitution. The monomer for this reaction, 2,7‐difluorothianthrene, can be synthesized in a moderate yield by a simple reaction sequence. Semiempirical calculations at the PM3 level suggest that 2,7‐difluorothianthrene is sufficiently activated, whereas NMR spectroscopy (¹H and ¹³C) indicates that the monomer is only slightly activated or (¹⁹F) not sufficiently activated for nucleophilic aromatic substitution. Model reactions with p‐cresol have demonstrated that the fluorine atoms on 2,7‐difluorothianthrene are readily displaced by phenoxides in high yields, and the process has been deemed suitable for polymer‐forming reactions. High‐molecular‐weight polymers have been produced from bisphenol A, bisphenol AF, and 4,4′‐biphenol. The polymers have been characterized with gel permeation chromatography, NMR spectroscopy, differential scanning calorimetry, thermogravimetric analysis, and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry. The glass‐transition temperatures for the polymers of different compositions and molecular weights range from 138 to 181 °C, and all the polymers have shown high thermooxidative stability, with 5% weight loss values in an air environment approaching 500 °C. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6353–6363, 2004     

Synthesis and characterization of wholly aromatic polyesters derived from 1-phenyl-2,6-naphthalene-dicarboxylic acid and aromatic diols

A series of new wholly aromatic polyesters was synthesized by melt polycondensation of 1-phenyl-2,6-naphthalenedicarboxylic acid (PNDA) and diacetates of various aromatic diols. The aromatic diols studied are hydroquinone (HQ), methylhydroquinone (MHQ), phenylhydroquinone (PHQ), (α-phenylisopropyl)hydroquinone (PIHQ), 2,6-naphthalenediol (2,6-ND), 1,4-naphthalenediol (1,4-ND), and 4,4′-biphenol (BP). These polyesters were characterized for their crystallinity, glass transition temperature (T_g), melting temperature (T_m), liquid crystallinity, and thermal stability. In general, crystallinity of the polyesters are very low and the T_g values of the polyesters range from 150 to 172°C depending on the structure of aromatic diols. All of the polymers formed nematic phases above their T_m or T_g. The polyesters derived from PHQ and PIHQ are soluble in chlorinated hydrocarbon solvents. The initial decomposition temperatures of the polyesters are above 400°C under N₂ atmosphere. © 1996 John Wiley & Sons, Inc.     

Synthesis and characterization of poly(arylene ether imidazole)s

Poly(arylene ether imidazole)s were prepared by the aromatic nucleophilic displacement reaction of a bisphenol imidazole with activated aromatic dihalides. The polymers had glass transition temperatures ranging from 230 to 318°C and number-average molecular weights as high as 82,000 g/mol. Thermogravimetric analysis showed a 5% weight loss occurring ～ 400°C in air and ～ 500°C in nitrogen. Typical neat resin mechanical properties obtained at room temperature included tensile strength and tensile modulus of 14.2 and 407 ksi and fracture energy (G_lc) of 23 in. lb/in.² Titanium-to-titanium tensile shear strengths measured at 23 and 200°C were 4800 and 3000 psi, respectively. In addition, preliminary data were obtained on carbon fiber laminates. The chemistry, physical, and mechanical properties of these polymers are discussed.     

Synthesis and characterization of new soluble cardo polyesters derived from 1,1‐bis‐[4‐(4‐chlorocarboxyphenoxy)phenyl]‐4‐tert‐butylcyclohexane with various bisphenols by solution polycondensation

A new cardo diacid chloride, 1,1‐bis‐[4‐(4‐chlorocarboxyphenoxy)phenyl]‐4‐tert‐butylcyclohexane ( 4 ), was synthesized from 1,1‐bis‐[4‐(4‐carboxyphenoxy)phenyl]‐4‐tert‐butylcyclohexane in refluxing thionyl chloride. Subsequently, various new polyesters were prepared from 4 with various bisphenols by solution polycondensation in nitrobenzene using pyridine as a hydrogen chloride quencher at 150 °C. These polyesters were produced with inherent viscosities of 0.32–0.50 dL · g^?1. Most of these polyesters exhibited excellent solubility in a variety of solvents such as N,N‐dimethylformamide, tetrahydrofuran, tetrachloroethane, dimethyl sulfoxide, N,N‐dimethylacetamide, N‐methyl‐2‐pyrrolidinone, m‐cresol, o‐chlorophenol, and chloroform. These polymers showed glass‐transition temperatures (T_g's) between 144 and 197 °C. The polymer containing the adamantane group exhibited the highest T_g value. The 10% weight loss temperatures of the polyesters, measured by thermogravimetric analysis, were found to be in the range of 426–451 °C in nitrogen. These cardo polyesters exhibited higher T_g's and better solubility than bisphenol A‐based polyesters. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2951–2956, 2001     

Synthesis and properties of polyesters of isomeric poly(oxynaphthyleneoxy-2-bromoterephthaloyl)s

A series of aromatic polyesters were prepared from 2-bromoterephthalic acid and naphthalenediol isomers. Only the polymers obtained from 1,4-, and 1,5- and 2,6-naphthalenediols were thermotropic nematogens and those from bent naphthalenediols were not liquid crystalline. Only the polyesters derived from 1,4-, 1,5-, and 2,6-naphthalenediols were semicrystalline. The melting temperatures ranged from 319 to 374°C depending on the structure of naphthalenediol moiety. The glass transition temperature, T_g, ranged from 95 to 168°C. TGA studied revealed that the polyesters have fairly good thermal stability     

Linear soluble polybenzyls

Linear soluble polybenzyls, although deceptively simple in structure, have been strangely elusive. We report for the first time the synthesis of perfectly linear soluble polybenzyls by the polycondensation of 1,2,4,5‐tetrasubstituted benzenes with formaldehyde using CHCl₃/trifluoroacetic acid (TFA) as the medium, wherein TFA served both as an acidic catalyst as well as a cosolvent. The number‐average molecular weights (M_n's) of the polymers, as determined by gel permeation chromatography, varied from about 1000 to 37,000, depending on the nature of the substituent on the benzene ring; M_n was highest when all four substituents were alkoxy groups and was lowest when they were all alkyl groups. This correlated well with susceptibility of the aromatic ring toward electrophilic aromatic substitution, which is the underlying polymerization mechanism. Differential scanning calorimetry of the polymers showed that most of the samples were amorphous with glass‐transition temperatures ranging from about ?80° to +80 °C, whereas a few that were either symmetrically substituted or possessed a long alkyl substituent were partially crystalline. Preliminary studies suggested that the methylene unit linking the phenyl rings in these polybenzyls could be readily oxidized to generate conjugated polymers that may be perceived as carbon analogues of polyaniline–poly(arylmethine)s. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2345–2353, 2003     

Synthesis and Characterization of Novel Methacrylic Copolymers: Determination of Monomer Reactivity Ratios

A new methacrylic monomer, 4‐nitro‐3‐methylphenyl methacrylate (NMPM) was prepared by reacting 4‐nitro‐3‐methyl phenol dissolved in methyl ethyl ketone (MEK) in the presence of triethylamine as a catalyst. Copolymerization of NMPM with methyl methacrylate (MMA) has been carried out in methyl ethyl ketone (MEK) by free radical solution polymerization at 70±1°C utilizing benzoyl peroxide (BPO) as initiator. Poly (NMPM‐co‐MMA) copolymers were characterized by FT‐IR, ¹H‐NMR and ¹³C‐NMR spectroscopy. The molecular weights (M_w and M_n) and polydispersity indices (M_w/M_n) of the polymers were determined using a gel permeation chromatograph. The glass transition temperatures (T_g) of the copolymers were determined by a differential scanning calorimeter, showing that T_g increases with MMA content in the copolymer. Thermogravimetric analysis of the polymers, performed under nitrogen, shows that the stability of the copolymer increases with an increase in NMPM content. The solubility of the polymers was tested in various polar and non‐polar solvents. Copolymer compositions were determined by ¹H‐NMR spectroscopy by comparing the integral peak heights of well separated aromatic and aliphatic proton peaks. The monomer reactivity ratios were determined by the Fineman‐Ross (r₁ =7.090:r₂=0.854), Kelen‐Tudos (r₁=7.693: r₂=0.852) and extended Kelen‐Tudos methods (r₁=7.550: r₂= 0.856).     

Amino alcohol additives for the fast living radical polymerization of methyl methacrylate with RuCl2(PPh3)3

A series of amino alcohols [e.g., R₂N (CH₂)_n OH (R = Me, Et, etc.; n = 2, 3, or 4)] were examined as additives for rate enhancement and finer reaction control in the living radical polymerization of methyl methacrylate with RuCl₂(PPh₃)₃. In general, these additives were more effective in acceleration than the corresponding amines as well as mixtures of an amine and a nonsubstituted alcohol, diamines, or diols. For example, 2-(diethylamino)ethanol significantly accelerated the polymerization (23 h, 91% at 60 °C) and gave polymers with narrower molecular weight distributions [weight-average molecular weight/number-average molecular weight (M_w/M_n) = 1.23], with respect to the system without the additive (550 h, 95%, M_w/M_n ∼ 2.0 at 80 °C; no polymerization at 60 °C). ¹H NMR analysis showed the interaction between the amino alcohols and RuCl₂(PPh₃)₃, which apparently formed a more active catalyst. Amino alcohols were also effective in Ru(Ind)Cl(PPh₃)₂-catalyzed systems (96% in 8 h at 80 °C). High-molecular-weight poly(methyl methacrylate) (M_n ∼ 1.1 × 10⁵) was synthesized with the RuCl₂(PPh₃)₃/2-(diethylamino)ethanol system, in which the polymerization reached 97% conversion in 4 h. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3597–3605, 2003