Incorporation and exclusion of long chain alkyl halides in fatty acid monolayers at the air-water interface

Mixed monolayers of deuterated palmitic acid C(15)D(31)COOH (dPA) and deuterated stearic acid C(17)D(35)COOH (dSA) with 1-bromoalkanes of different alkyl chain length (C(4) to C(16)) at the air-water interface were investigated. Alkanes and 1-chlorohexadecane ClC(16)H(33) (ClHex) were also studied to compare the effects of the halogen on the mixed monolayers. Surface pressure-area isotherms and Brewster angle microscopy (BAM) were used to obtain the organization and phase behavior, providing a macroscopic view of the mixed monolayers. A molecular-level understanding of the interfacial molecular organization and intermolecular interactions was obtained by using vibrational sum frequency generation (SFG) spectroscopy and infrared reflection-absorption spectroscopy (IRRAS). It was found that from the alkyl halide molecules investigated 1-bromopentadecane, BrC(15)H(31) (BrPent), 1-bromohexadecane, BrC(16)H(33) (BrHex), and ClHex incorporate into the fatty acid monolayers. Alkanes of 15- and 16-carbon chain length do not incorporate into the fatty acid monolayer, which suggests that the halogen is needed for incorporation. Isotherms and spectra suggest that BrHex molecules are squeezed out, or excluded, from the fatty acid monolayer as the surface pressure is increased, while BAM images confirm this. Additionally, SFG spectra reveal that the alkyl chains of both fatty acids (dPA and dSA) retain an all-trans conformation after the incorporation of alkyl halide molecules. BAM images show that at low surface pressures BrHex does not affect the two-dimensional morphology of the dPA and dSA domains and that BrHex is miscible with dPA and dSA. We also present for the first time BAM images of BrHex deposited on a water surface, which reveal the formation of aggregates while the surface pressure remains unchanged from that of neat water.     

Dielectrophoretic immobilization of proteins: Quantification by atomic force microscopy

The combination of alternating electric fields with nanometer‐sized electrodes allows the permanent immobilization of proteins by dielectrophoretic force. Here, atomic force microscopy is introduced as a quantification method, and results are compared with fluorescence microscopy. Experimental parameters, for example the applied voltage and duration of field application, are varied systematically, and the influence on the amount of immobilized proteins is investigated. A linear correlation to the duration of field application was found by atomic force microscopy, and both microscopical methods yield a square dependence of the amount of immobilized proteins on the applied voltage. While fluorescence microscopy allows real‐time imaging, atomic force microscopy reveals immobilized proteins obscured in fluorescence images due to low S/N. Furthermore, the higher spatial resolution of the atomic force microscope enables the visualization of the protein distribution on single nanoelectrodes. The electric field distribution is calculated and compared to experimental results with very good agreement to atomic force microscopy measurements.     

A method for visualization of biomolecules labeled by a single quantum dot in living cells by a combination of total internal reflection fluorescence microscopy and intracellular fluorescence microscopy

We developed a simple fluorescence microscopy for acquisition of high-resolution images of single quantum dots (QDs) labeled to biomolecules on apical plasma membrane, in cell interior and on basal plasma membrane of living cells. The method was a combination of total internal reflection fluorescence microscopy (TIRFM) at apical cell surface and intracellular microscopy coupled with focusing objective. Insulin conjugated to single QD (insulin-QD) was chosen as the model system. In order to bind insulin-QDs to insulin receptors on the plasma membrane through the interaction between insulin and its receptor, as well as internalize them, the cells attached on a coverslip were incubated with biotinylated insulin and QD-streptavidin conjugate at 37 °C. Next, fluorescent molecules in the cells were photobleached by illuminating the cells using a 100-W mercury lamp with the wavelengths from 460 to 490 nm. Then, the incident angle of a laser beam was adjusted to produce total internal reflection at the apical surface of a single cell. In this case, the insulin-QDs in the whole cell were excited, and the fluorescent molecules outside the cell were not illuminated. Finally, the images of single insulin-QDs on the apical plasma membrane, in the cell interior and on the basal plasma membrane of the cell were taken by focusing the objective to different positions, respectively. The resolution and contrast of the fluorescent spots in the images were much higher than those obtained by using epi-fluorescence microscopy and comparable to those obtained by using the conventional TIRFM. The method improved the image acquisition speed for the images on the apical and basal plasma membrane using the conventional TIRFM, and could acquire the high-resolution images in the cell interior quickly.     

Quantitative detection of antibody based on single-molecule counting by total internal reflection fluorescence microscopy with quantum dot labeling

We presented a sensitive method to quantify antibody based on single-molecule counting by total internal reflection fluorescence microscopy with quantum dot labeling. In this method, the biotinylated monoclonal anti-human IgG molecules were immobilized on the silanized glass substrate surface. By the strong biotin-streptavidin affinity, streptavidin-coated quantum dots were labeled to the target molecules as fluorescent probe. Then, images of fluorescent spots in the evanescent wave field were obtained by a high-sensitivity electron multiplying charge-coupled device. Finally, the number of fluorescent spots corresponding to single molecules in the subframe images was counted, one by one. The linear range of 8.0 × 10⁻¹⁴ to 5.0 × 10⁻¹² mol L⁻¹ was obtained between the number of single molecules and the sample concentration.     

Spectral imaging of single molecules by transmission grating-based epi-fluorescence microscopy

A spectral imaging method of single protein molecules labeled with a single fluorophore is presented. The method is based on a transmission grating and a routine fluorescence microscope. The bovine serum alubmin (BSA) and antiBSA molecules labeled with Alexa Fluor 488 and Alexa Fluor 594, respectively, are used as the model proteins. The fluorescence of single molecules is dispersed into zeroth-order spectrum and first-order spectrum by the transmission grating. Results show that the fluorescence emission spectrum of single molecule converted from the first-order spectral imaging is in good agreement with the bulk fluorescence spectrum. The spectral resolution of 2.4 nm/pixel is obtained, which is sufficient for identifying the molecular species in a multicomponent system.     

Temperature and compression rate independent domain shape in Langmuir monolayers of di-n-dodecyl hydrogen phosphate at the air-water interface

Thermodynamic and morphological properties of Langmuir monolayers of di-n-dodecyl hydrogen phosphate (DDP) have been studied by film balance and Brewster angle microscopy (BAM) over a wide range of temperature between 5 and 40 degrees C. From pi-A isotherms, a generalized phase diagram consisting of gas (G), liquid expanded (LE) and liquid condensed (LC) phases is constructed for the DDP monolayers. The BAM images show the formation of gas bubble in the bright background of LE phase during G-LE phase transitions and fingering LC domains during LE-LC phase transitions. The shapes of these domains are independent of temperature, showing a sharp contrast to the temperature-dependent monolayer morphologies of amphiphilic systems where the shape of the LC domains changes either from compact circular to fingering or from irregular or spiral to compact patterns with increasing temperature. In addition, the domains do not show any change in their shapes with decreasing the compression rate. Since the two-alkyl chains are directly attached by covalent bonds to the phosphate group, the rearrangement of the molecules needs to move the whole molecules including the hydration sphere. The difficulty related to such a movement of the molecules causes the fingering domains, which are independent of external variables. Although the domains are formed in a fingering shape, the equilibrium shape can be attained by about 120 min at 15 degrees C indicating a rather slow relaxation rate.     

Fluorescence single-molecule counting assays for protein quantification using epi-fluorescence microscopy with quantum dots labeling

A single-molecule counting approach for quantifying the antibody affixed to a surface using quantum dots and epi-fluorescence microscopy is presented. Modifying the glass substrates with carboxyl groups provides a hydrophilic surface that reacts with amine groups of an antibody to allow covalent immobilization of the antibody. Nonspecific adsorption of single molecules on the modified surfaces was first investigated. Then, quantum dots were employed to form complexes with surface-immobilized antibody molecules and used as fluorescent probes for single-molecule imaging. Epi-fluorescence microscopy was chosen as the tool for single-molecule fluorescence detection here. The generated fluorescence signals were taken by an electron multiplying charge-coupled device and were found to be proportional to the sample concentrations. Under optimal conditions, a linear response range of 5.0 × 10⁻¹⁴-3.0 × 10⁻¹² mol L⁻¹ was obtained between the number of single molecules and sample concentration via a single-molecule counting approach.     

烷基链长对紫精分子在Cu(100)电极表面吸附结构的影响

用循环伏安法(CV)和原位扫描隧道显微镜(STM)研究了烷基取代的紫精分子在Cu(100)电极上的氧化还原行为及其吸附结构对电极电势的依赖性. 对乙基紫精(DHV)和庚基紫精(DEV)在含有KCl电解质溶液中进行循环伏安曲线的测定, 两者呈现出不同的氧化还原行为. 从STM所得图像观察, 二价庚基紫精在Cl-c(2×2)-Cu(100)电极上呈现出二维有序的点阵组装结构,而二价乙基紫精却未出现任何的吸附结构. 降低电极电势至单电子转移反应发生时, 形成的自由基庚基紫精在电极表面呈现出稳定的条带状组装结构, 而自由基乙基紫精出现的条带组装结构比较密集且不能稳定存在. 继续降低电极电势, 庚基紫精的吸附结构会随之出现明显的变化,而乙基紫精不会有吸附结构改变的响应.     

Self-assembly of α-6T Molecule on Ag(100) and Related STM Induced Luminescence

We have investigated the self-assembly and light emission properties of organic α-sexithiophene (α-6T) molecules on Ag(100) under different coverage by scanning tunneling microscopy (STM). At very low coverage, the α-6T molecules form a unique enantiomer by grouping four molecules into a windmill supermolecular structure. As the coverage is increased, α-6T molecules tend to pack side by side into a denser stripe structure. Fur-ther increase of the coverage will lead to the layer-by-layer growth of molecules on Ag(100) with the lower-layer stripe pattern serving as a template. Molecular fluorescence for α-6T molecules on Ag(100) at a coverage of five monolayers has been detected by light excitations,which indicates a well decoupled electronic states for the top-layer α-6T molecules. How-ever, the STM induced luminescent spectra for the same sample reveal only plasmonic-like emission. The absence of intramolecular fluorescence in this case suggests that the elec-tronic decoupling is not a sufficient condition for generating photon emission from molecules. For intramolecular fluorescence to occur, the orientation of the dynamic dipole moment of molecules and the energy-level alignment at the molecule-metal interface are also important so that molecules can be effectively excited through efficient dipolar coupling with local plasmons and by injecting holes into the molecules.     

Visualisation of biopolymer mixtures using confocal scanning laser microscopy (CSLM) and covalent labelling techniques

Confocal scanning laser microscopy (CSLM) has been used to study the behaviour of mixtures of proteins, gelatine, whey proteins and β-lactoglobulin, and polysaccharides, dextran, gellan gum, carrageenan, gum Arabic, and starch. CSLM proved to be a suitable technique to visualise the microstructure of these (phase separated) mixtures in two and three-dimensional images. Contrast through fluorescence is obtained either by covalent labelling (polysaccharides and proteins) or non-covalent labelling (proteins and starch). Double and triple labelling allows the visualisation of individual components in a complex mixture of biopolymers.     

Transmission electron microscopy studies of NaLaMgWO6: spontaneous formation of compositionally modulated stripes

Transmission electron microscopy studies of the perovskite NaLaMgWO 6 reveal the formation of a complex, compositionally modulated structure. Annular dark field scanning transmission electron microscopy images and scanning transmission electron microscopy-electron energy-loss spectroscopy scans show that this modulation involves a repeating pattern of La-rich and La-poor stripes, each stripe 6 a p or approximately 24 A wide (where a p is the edge length of the simple cubic perovskite unit cell). High-resolution transmission electron microscopy images clearly show, and electron diffraction patterns confirm, a periodicity of 12 a p along either the [100] p or [010] p direction. Available evidence suggests a spontaneous separation into stripes that possess the nominal stoichiometry, NaLaMgWO 6, alternating with Na-poor/La-rich stripes that have a stoichiometry of (La x Na 1-3 x )LaMgWO 6. X-ray powder diffraction measurements are insensitive to this intricate structural complexity, which may be a more widespread feature of (A (+)Ln (3+))MM'O 6 perovskites than previously appreciated.     

Detection of single-molecule DNA hybridization by using dual-color total internal reflection fluorescence microscopy

We examined the use of prism-type simultaneous dual-color total internal reflection fluorescence microscopy (TIRFM) to probe DNA molecules at the single-molecule level. The system allowed the direct detection of the complementary interactions between single-stranded probe DNA molecules (16-mer) and various lengths of single-stranded target DNA molecules (16-mer and 55-mer) that had been labeled with different fluorescent dyes (Cy3, Cy5, and fluorescein). The polymer-modified glass substrate and the extent of DNA probe immobilization were easily characterized either with standard TIRFM or with atomic force microscopy. However, only dual-color TIRFM could provide unambiguous images of individual single-stranded target DNA molecules hybridized with the correct sequence in the range of fM–aM. Succinic anhydride showed low RMS roughness and was found to be an optimal blocking reagent against non-specific adsorption, with an efficiency of 92%. This study provides a benchmark for directly monitoring the interactions and the detection of co-localization of two different DNA molecules and can be applied to the development of a nanoarray biochip at the single-molecule level.     

Effects of Annealing Temperature on Microstructure and Electrochemical Properties of Perovskite-type Oxide LaFeO3 as Negative Electrode for Metal Hydride/Nickel(MH/Ni) Batteries

We reported the effects of annealing temperatures on microstructure and electrochemical properties of perovskite-type oxide LaFeO₃ prepared by stearic acid combustion method. X-Ray diffraction(XRD) patterns show that the annealed LaFeO₃ powder has orthorhombic structure. Scanning electron microscopy(SEM) and transmission electron microscopy(TEM) images show the presence of homogeneously dispersed, less aggregated, and small crystals(30-40 nm) at annealing temperatures of 500 and 600℃. However, as the annealing temperature was increased to 700 and 800℃, the crystals began to combine with each other and grew into further larger crystals(90-100 nm). The electrochemical performance of the annealed oxides was measured at 60℃ using chronopotentiometry, poten-tiodynamic polarization, and cyclic voltammetry. As the annealing temperature increased, the discharge capacity and anti-corrosion ability of the oxide electrode first increased and then decreased, reaching the optimum values at 600℃, with a maximum discharge capacity of 563 mA·h/g. The better electrochemical performance of LaFeO₃ annealed at 600℃ could be ascribed to their smaller and more homogeneous crystals.     

Synthesis of Fluorescent Gelators and Direct Observation of Gelation with a Fluorescence Microscope

Fluorescein‐, benzothiazole‐, quinoline‐, stilbene‐, and carbazole‐containing fluorescent gelators have been synthesized by connecting gelation‐driving segments, including l ‐isoleucine, l ‐valine, l ‐phenylalanine, l ‐leucine residue, cyclo(l ‐asparaginyl‐l ‐phenylalanyl), and trans‐(1R,2R)‐diaminocyclohexane. The emission behaviors of the gelators were investigated, and their gelation abilities studied against 15 solvents. The minimum gel concentration, variable‐temperature spectroscopy, transmission electron microscopy, scanning electron microscopy, fluorescence microscopy (FM), and confocal laser scanning microscopy (CLSM) were used to characterize gelation. The intermolecular hydrogen bonding between the N?H and C=O of amide, van der Waals interactions and π–π stacking play important roles in gelation. The colors of emission are related to the fluorescence structures of gelators. Fibrous aggregates characterized by the color of their emission were observed by FM. 3D images are produced by the superposition of images captured by CLSM every 0.1 μm to a settled depth. The 3D images show that the large micrometer‐sized aggregates spread out three dimensionally. FM observations of mixed gelators are studied. In the case of gelation, two structurally related gelators with the same gelation‐driving segment lead to the gelators build up of the same aggregates through similar hydrogen‐bonding patterns. When two gelators with structurally different gelation‐driving segments induce gelation, the gelators build up each aggregate through individual hydrogen‐bonding patterns. A fluorescent reagent that was incorporated into the aggregates of gels through van der Waals interactions was developed. The addition of this fluorescent reagent enables the successful observation of nonfluorescent gelators’ aggregates by FM.     

Fluorescence microscopy observation of self-organized microstructure formed by a rare earth compound

The morphologies of monolayers containing Eu(TTA)3Phen (TTA=thenoyltrifluoroace-tone, Phen = 1, 10-phenanthroline) were studied at the air/liquid interface on different subphases by fluorescence microscopy (FM). The composite subphase was the basic premise for the stable existence of the rare earth compound at air/liquid interface. The process that rare earth compound phase changes from liquid expanded state to liquid condensed state corresponded to a plateau in the π-A isotherm. In the pure Eu(TTA)3Phen monolayer, rod domains of Eu(TTA)3Phen formed and packed with no order. In the mixed monolayers with stearic acid (SA), phase transition of SA occurred first and formed domains with an electric gradient field, which induced the rare earth compound to form luminescent ring domains. Influence of intermolecular interaction on the self-organized microstructure was revealed.     

Monolayer characteristics of mixed octadecylamine and stearic acid at the air/water interface

Mixed monolayers of stearic acid (SA) and octadecylamine (ODA) at the air/water interface were investigated in this article. The miscibility of the two compounds was evaluated by the measurement of surface pressure-area per molecule (pi-A) isothems and the direct observation of Brewster angle microscopy (BAM) on the water surface. The two compounds were spread individually on the subphase (method 1) or premixed first in the spreading solvent and then cospread (method 2). The effect of spreading method on the miscibility of the two compounds was also studied. The results show that the mixed monolayers prepared by method 1 cannot get a well-mixed state. The isotherms of mixed monolayers preserve both characteristics of SA and ODA and exhibit two collapse points. The calculated excess surface area is very small. Besides, distinguished domains corresponding to those of pure SA and ODA can be inspected from the BAM images. Such results indicate that SA and ODA cannot get a well-mixed phase via 2-dimensional mixing. On the contrary, in the mixed monolayer prepared by cospreading, the two compounds exhibit high miscibility. In the pi-A isotherms, the individual characteristics of SA and ODA disappear. The calculated excess area exhibits a highly positive deviation which indicates the existence of special interaction between the two compounds. The low compressibility of isotherm implies the highly rigid characteristic of the mixed monolayer. which was also sustained by the striplike collapse morphology observed from the BAM. The rigid characteristic of SA/ODA mixed monolayer was attributed to the formation of "catanionic surfactant" by electrostatic adsorption of headgroups of SA and ODA or to the formation of salt by acid-base reaction.     

Atomic force microscopy of soil and stream fulvic acids

Atomic force microscopy (AFM) was used to image fulvic acid (FA) deposited from aqueous solution on to the basal-plane surfaces of freshly cleaved muscovite, and allowed to air dry. Two fulvic acid samples were used: a soil fulvic acid (SFA) prepared by NaOH extraction from a muck soil underlying a freshwater fen in the New Jersey Pinelands and the IHSS standard Suwannee River fulvic acid (SRFA). The use of tapping-mode AFM (TMAFM), a relatively new technique which reduces the lateral frictional forces generally associated with contact-mode AFM, allowed excellent images of delicate FA structures to be obtained with minimal sample disturbance. Four main structures were observed on SFA. At low concentrations, sponge-like structures consisting of rings ( 15 nm in diameter) appeared, along with small spheres (10–50 nm). At higher concentrations, aggregates of spheres formed branches and chain-like assemblies. At very high surface coverage, perforated sheets were observed. On some samples, all of these structures were apparent, perhaps owing to concentration gradients on drying. SRFA samples were only imagined at higher concentrations. Spheres, aggregated branches, and perforated sheets were apparent. The results agree with previous work by Stevenson and Schnitzer [Soil Sci., 133(1992) 179], who applied TEM to soil FAs freeze-dried on muscovite. However, the TEM images did not detect the smaller spheres and sponge-like structures observed by AFM at low concentrations. The relevance of imaging dried samples remains questionable; hence, it is hoped in the future to use new in situ TMAFM to image FAs sorbed to surfaces in solution. Although TMAFM provided excellent images, a variety of artifacts and potential problems were encountered, as discussed.     

In cell measurement of fluorescence lifetime imaging microscopy revealed C-terminal conformation changes of Ferroportin upon addition of Mn2+

The C-terminal conformation changes of Ferroportin upon addition of Mn²⁺ were revealed by fluorescence lifetime imaging microscopy.     

DOPC/DPPC单层膜中分子间的相互作用及形态特征

利用Langmuir-Blodgett(LB)技术制备了不同表面压力下的1,2-二油酸-甘油-3-磷脂酰胆碱(DOPC)/1,2-二棕榈酸甘油-3-磷脂酰胆碱(DPPC)(摩尔比为1:1)和DOPC/DPPC/Chol(摩尔比为2:2:1)单层膜, 对单层膜内分子间的相互作用进行了热力学分析, 并用荧光显微镜和原子力显微镜对其形态进行了观测.热力学分析表明, DOPC与DPPC分子在单层膜结构中相互作用为排斥力, 诱导单层膜出现相变; DOPC, DPPC与胆固醇(Chol)间的相互作用均为吸引力, 当表面压力(π)大于18 mN/m时, DPPC与胆固醇的作用力大于DOPC.荧光显微镜观测表明, DOPC/DPPC单层膜出现明显相分离现象, 富含DPPC微区成“花形”结构, 且随着表面压力的升高微区逐渐增大, “花瓣”增多; 当胆固醇加入到DOPC/DPPC体系时, 单层膜相态由液相与凝胶相共存转变为液态无序相与液态有序相共存结构, 富含DPPC的微区形状从“花形”转变成“圆形”.原子力显微镜对单层膜的表征验证了荧光显微镜的观测结果, 表明胆固醇加入到DOPC/DPPC体系中对单层膜排列具有明显的影响, 压力和溶液状态等是影响脂膜结构的重要因素.     

Effects of a central metal on the organization of 5,10,15,20-tetra-(p-chlorophenyl)-rare earth porphyrin hydroxyl compound at the air/water interface and in Langmuir-Blodgett films

Langmuir monolayers and Langmuir-Blodgett (LB) films of 5,10,15,20-tetra-(p-chlorophenyl) terbium/gadolinium porphyrin hydroxyl compound (TbOH and GdOH) and their mixtures with stearic acid (SA) in a molar ratio of 1:1 were investigated by Brewster angle microscopy (BAM), ultraviolet-visible (UV-vis), and infrared (IR) spectroscopy and atomic force microscopy (AFM). pi-A isotherms showed that well-defined Langmuir monolayers were formed at an air/water interface for the porphyrins and their mixture with SA. The BAM observations suggest that the pi-pi interaction between the GdOH molecules is stronger than that between the TbOH molecules. This result can be further confirmed by the AFM measurements. After the introduction of SA, the pi-pi interaction between the TbOH molecules is broken and thus two phases formed in the mixed LB film. However, it cannot break the stronger pi-pi interaction between the GdOH molecules. Therefore, no phase separation is observed in the GdOH/SA LB film. IR reflection-absorption (RA) spectra showed that the COOH groups of SA are partly converted to COO(-) groups, suggesting that there is an interaction between MOH and SA in the films. This interaction leads the benzene rings of TbOH to rotate toward parallel to the substrate and those of GdOH to rotate toward perpendicular to the substrate. All these results have demonstrated that the central metal ions have great effects on the organization and formation of the films.