Determination of soluble and insoluble nickel compounds in airborne particulate matter by graphite furnace atomic absorption spectrometry and inductively coupled plasma mass spectrometry

An extraction procedure for the determination of soluble and insoluble nickel and its compounds in ambient air dust was investigated employing a special device for the generation of test aerosols and using water-soluble NiCl₂, partly water-soluble NiCO₃ and water-insoluble NiO as model compounds. Additionally, results of the separation and determination of different nickel species down to some ng/m³ in ambient aerosols are discussed. The extraction was carried out with a solution containing 0.01 mol/L EDTA in order to determine partly water-soluble compounds such as NiCO₃ and water-soluble, non-toxic nickel compounds in one step. Airborne dust was sampled on filters at locations close to two metallurgical plants in Northrhine-Westphalia (Germany), and first results on the nickel concentration (mean (median) values over a period of 4 months: 8.6 ± 6.5 ng/m³ (6.7 ng/m³) and 27.7 ± 36 ng/m³ (10.8 ng/m³), respectively) in the collected dust are presented. For EDTA-soluble nickel compounds the maximum and mean fractions of total nickel were found to be 77.1% and 18.6 ± 12%, respectively.     

Evaluation of an in-injection port thermal desorption-gas chromatography/mass spectrometry method for analysis of non-polar organic compounds in ambient aerosol samples

Thermal desorption coupled with gas chromatography/mass spectrometry (TD-GC/MS) is an alternative to solvent extraction (SE)-based GC/MS (SE-GC/MS) for the analysis of non-polar organic compounds in filter or impactor-collected aerosols. TD-GC/MS has no sample pretreatment and requires a small filter aliquot for detecting individual organic compounds. The performance of an in-injection port TD-GC/MS is evaluated for polycyclic aromatic hydrocarbons (PAHs), n-alkanes, iso-/anteiso-alkanes, hopanes, steranes, branched alkanes, cyclohexanes, alkenes, and phthalates in standards and ambient air samples. Replicate analysis for 132 organic compounds showed relative standard deviations <10%, with the majority <5%. Accuracy for 15 PAHs, determined with NIST standard reference material (SRM) 1649a urban dust, was within +/-5% of the certified values. TD-GC/MS and SE-GC/MS method comparisons for 14 Hong Kong ambient samples agreed within 11% for 106 non-polar compounds. For 19 Tong Liang, China samples, agreement was within 13% for 23 PAHs.     

Simultaneous determination of benzotriazoles and ultraviolet filters in ground water, effluent and biosolid samples using gas chromatography-tandem mass spectrometry

A new method using gas chromatography-tandem mass spectrometry (GC-MS/MS) was developed for the determination of four benzotriazoles, i.e. benzotriazole (BT), 5-methylbenzotriazole (5-TTri), 5-chlorobenzotriazole (CBT), 5,6-dimethylbenzotriazole (XTri), and six UV filters, i.e. benzophenone-3 (BP-3), 3-(4-methylbenzylidene)camphor (4-MBC), octyl 4-methoxycinnamate (OMC), 2-(3-t-butyl-2-hydroxy-5-methylphenyl)-5-chloro benzotriazole (UV-326), 2-(2'-hydroxy-5'-octylphenyl)-benzotriazole (UV-329), and octocrylene (OC) in ground water, effluent and biosolid samples. Solid phase extraction (SPE) and pressurized liquid extraction (PLE) were applied as the preconcentration method for water samples (ground water and effluent) and biosolid samples, respectively. The optimized method allowed us to quantify all target compounds with the method detection limits ranging from 0.29 to 11.02 ng/L, 0.5 to 14.1 ng/L and 0.33 to 8.23 ng/g in tap water, effluent and biosolid samples, respectively. The recoveries of the target analytes in tap water, effluent and biosolid samples were 70-150%, 82-127% and 81-133%, respectively. The developed analytical method was applied in the determination of these target compounds in ground water, effluent and biosolid samples collected from Bolivar sewage treatment plants in South Australia. In effluent samples, the target compounds BT, 5-TTri, CBT, XTri and BP-3 tested were detected with the maximum concentration up to 2.2 μg/L for BT. In biosolid samples, eight out of ten compounds tested were found to be present at the concentrations ranging between 18.7 ng/g (5-TTri) and 250 ng/g (4-MBC).     

Determination of morphine 3-esters in rabbit plasma by high-performance liquid chromatography with ultraviolet detection

A sensitive high-performance liquid chromatographic (HPLC) method for the quantitation of the morphine 3-esters 1[3-(2, 2-dimethylvaleroyl)-morphine (A), 3-(2-phenylbenzoyl)-morphine (B) and 3-(2,2-diphenylpropionyl)-morphine (C)] in rabbit plasma is described. Sample preparation was based on reversed-phase solid-phase extraction. The compounds were separated on C(18) reversed-phase analytical columns and then determined by ultraviolet detection. The recovery from plasma was 78.7 +/- 7.4%, 69.1 +/- 6.9% and 75 +/- 7.2% (mean +/- SD) for A, B, and C, respectively. The present method enabled the detection limit of 0.2, 0.2 and 0.1 ng and quantification limit of 20, 10 and 10 ng/ml for A, B and C, respectively. The developed method was used for determination of the plasmakinetics of these morphine 3-esters in rabbits.     

Simultaneous determination of the camptothecin analogue CPT-11 and its active metabolite SN-38 by high-performance liquid chromatography: application to plasma pharmacokinetic studies in cancer patients.

CPT-11 (I; 7-ethyl-10-[4-(1-piperidino)-1- piperidino]carbonyloxycamptothecin) is a new anticancer agent currently under clinical development. A sensitive high-performance liquid chromatographic assay suitable for the simultaneous determination of I and its active metabolite SN-38 (II) in human plasma, and their preliminary clinical pharmacokinetics, are described. Plasma samples were processed using a solid-phase (C18) extraction step allowing mean recoveries of I, II and the internal standard camptothecin (III) of 84, 99 and 72%, respectively. The extracts were chromatographed on a C18 reversed-phase column with a mobile phase composed of acetonitrile, phosphate buffer and heptanesulphonic acid, with fluorescence detection. The calibration graphs were linear over a wide range of concentrations (1 ng/ml-10 micrograms/ml), and the lower limit of determination was 1 ng/ml for both I and II. The method showed good precision: the within-day relative standard deviation (R.S.D.) (5-1000 ng/ml) was 13.0% (range 4.9-19.4%) for I and 12.8% (6.7-19.1%) for II; the between-day R.S.D. (5-10,000 ng/ml was 7.9% (5.4-17.5%) for I and 9.7% (3.5-15.1%) for II. Using this assay, plasma pharmacokinetics of both I and II were simultaneously determined in three patients receiving 100 mg/m2 I as a 30-min intravenous infusion. The mean peak plasma concentration of I at the end of the intravenous infusion was 2400 +/- 285 ng/ml (mean +/- standard error of the mean). Plasma decay was triphasic with half-lives alpha, beta and gamma of 5.4 +/- 1.8 min, 2.5 +/- 0.5 h and 20.2 +/- 4.6 h, respectively. The volume of distribution at steady state was 105 +/- 15 l/m2, and the total body clearance was 12.5 +/- 1.9 l/h.m2. The maximum concentrations of the active metabolite II reached 36 +/- 11 ng/ml.     

Determination of donepezil hydrochloride (E2020) in plasma by liquid chromatography-mass spectrometry and its application to pharmacokinetic studies in healthy, young, Chinese subjects

A sensitive, simple, and specific liquid chromatographic method coupled with electrospray ionization-mass spectrometry for the determination of donepezil in plasma is developed, and its pharmacokinetics in healthy, male, Chinese is studied. Using loratadine as the internal standard, after extraction of the alkalized plasma by isopropyl alcohol-n-hexane (3:97, v/v), solutes are separated on a C(18) column with a mobile phase of methanol-acetate buffer (pH 4.0) (80:20, v/v). Detection is performed with a time-of-flight mass spectrometer equipped with an electrospray ionization source operated in the positive-ionization mode. Quantitation of E2020 is accomplished by computing the peak area ratio (donepezil [M+H](+) m/z 380-loratadine [M+H](+) m/z 383) and comparing them with the calibration curve (r = 0.9998). The linear calibration curve is obtained in the concentration range 0.1-15 ng/mL. The limit of quantitation is 0.1 ng/mL. The mean recovery of E2020 from human plasma is 99.4% +/- 6.3% (ranging 93.4-102.6%). The inter- and intraday relative standard deviation is less than 15%. After an oral administration of 5 mg E2020 to 20 healthy Chinese volunteers, the main pharmacokinetic parameters of E2020 are as follow: T(max), 3.10 +/- 0.55 h; t((1/2)), 65.7 +/- 12.8 h; C(max), 10.1 +/- 2.02 ng/mL; MRT, 89.4 +/- 13.4 h; and CL/F, 9.9 +/- 4.3 L/h.     

A high-performance liquid chromatography/tandem mass spectrometry method for the determination of artemisinin in rat plasma

Artemisinin is a widely used antimalarial drug. To evaluate the pharmacokinetics of artemisinin in rats, a sensitive and specific liquid chromatography/tandem mass spectrometric (LC/MS/MS) method was developed and validated for the determination of artemisinin in rat plasma. For detection, a Sciex API 4000 LC/MS/MS instrument with an electrospray ionization (ESI) TurboIonSpray inlet in the positive ion multiple reaction monitoring (MRM) mode was used to monitor precursor ([M+NH4]+) --> product ions of m/z 300.4 --> 209.4 for artemisinin and m/z 316.4 --> 163.4 for artemether, the internal standard (IS). The plasma samples were pretreated by a simple liquid-liquid extraction with ether. The standard curve was linear (r > 0.99) over the artemisinin concentration range of 1.0-200.0 ng/mL in plasma. The method had a lower limit of quantification of 1.0 ng/mL for artemisinin in 100 microL of plasma, which offered a satisfactory sensitivity for the determination of artemisinin. The intra- and inter-day precisions were measured to be within +/-5.3% and accuracy between -2.6% and 1.2% for all quality control samples, lower limit of quantification and upper limit of quantification samples. The extraction recoveries of artemisinin and the IS were 95.4 +/- 4.5% and 92.8 +/- 3.9%, respectively. This present method was successfully applied to the characterization of the pharmacokinetic profile of artemisinin in rats after oral administration.     

Simultaneous determination of triptolide, tripdiolide and tripterine in human urine by high-performance liquid chromatography coupled with ion trap atmospheric-pressure chemical ionization mass spectrometry

An accurate and selective method for the simultaneous determination of triptolide, tripdiolide and tripterine in human urine using hydrocortisone as an internal standard (IS) by high-performance liquid chromatography coupled with atmospheric-pressure chemical ionization mass spectrometry in negative ion mode has been developed. After triptolide, tripdiolide and tripterine in human urine were extracted with ethyl acetate and cleaned by solid-phase extraction with C(18) cartridges, a satisfactory separation was achieved on an XDB C(18) short column (30 x 2.1 mm i.d., 3 microm) using the mobile phase of acetic acid-ammonium acetate (5 mmol/L, pH = 4.5)-acetonitrile-methanol in gradient elution. Detection was operated by APCI in selected ion monitoring mode. The target ions m/z 359, m/z 375, m/z 449 and m/z 419 were selected for the quantification of triptolide, tripdiolide, tripterine and IS, respectively. The linear range was 1.0-100.0 ng mL(-1), and the limits of quantification in human urine were found to be 0.1-0.5 ng mL(-1) for the three compounds. The precisions (CV%) and accuracies were 6.6-12.9 and 85.1-97.0%, respectively. The developed method could be applied to the determination of triptolide, tripdiolide and tripterine in human urine for diagnosis of the intoxication and for forensic purposes.     

Determination of organic acids in aerosol particles from a coniferous forest by liquid chromatography-mass spectrometry

LC-MS methods with use of ion-trap and time-of-flight mass spectrometers were developed for the determination of organic acids in aerosol samples collected by a high-volume sampler in a Finnish coniferous forest. Comparison was made of the composition of samples collected during atmospheric formation of new aerosol particles and on days when this formation did not occur. A dynamic sonication-assisted solvent extraction system was developed for fast and quantitative extraction of the filter samples. Several organic acids, including pinonic acid, pinic acid, and homologous series of n-alkanoic acids, n-alkenoic acids, and aliphatic dicarboxylic acids, were identified. In samples collected between 08:00 and 16:00 hours the concentration of pinonic acid ranged from 0.5 ng m(-3) to 3.7 ng m(-3) and that of pinic acid from 0.2 ng m(-3) to 1.5 ng m(-3). For most of the compounds identified, the trends in concentration could be explained by the differences in temperature during collection. However, concentrations of short-chain n-alkanoic acids were clearly higher on the days when new aerosol particle formation occurred.     

Speciation of butyltin compounds in marine sediments by preconcentration on C60 and gas chromatography-mass spectrometry

A new method for the speciation of butyltin compounds by solid phase extraction and direct injection using gas chromatography-mass spectrometry (GC/MS) is described. The compounds were complexed with sodium diethyldithiocarbamate and retained on a C60 sorbent column. The neutral chelates of butyltin compounds were eluted with ethyl acetate containing NaBPr4 as derivatising reagent. The main analytical figures of merit of the proposed method for 10 ml of sample are: linear range 0.2-35 ng/g expressed as Sn; limits of detection, 0.07, 0.09 and 0.10 ng/g as Sn for monobutyltin, dibutyltin and tributyltin, respectively. No interferences from metal ions such as Zn2+, Fe3+, Sb3t, Pb2+, Ni2+ and Mn2+ were observed in the determination of organotin compounds. The validation of method was performed out by the analysis of a standard reference sediment (CRM 462). The method was also applied to the determination of butyltin compounds in marine sediment samples.     

同位素稀释-高分辨气相色谱/高分辨质谱法测定大气中多溴联苯醚和多溴联苯153

针对环境监测的特点和要求,建立了同位素稀释-高分辨气相色谱/高分辨质谱测定大气中多溴联苯醚(PBDEs)和多溴联苯153(BB153)的方法。采用正己烷/二氯甲烷(1:1, v/v)及正己烷分别对PBDEs和BB153进行快速溶剂萃取,并通过复合硅胶柱净化。在校准曲线最高浓度的10%和90%加标水平下得到的天然内标的平均回收率分别为100%和104%,平均相对标准偏差(n=7)分别为5%和6%;二至十溴代联苯醚和BB153相应的¹³C同位素标准物质回收率在36.5%~133%之间;而一溴代联苯醚¹³C同位素标准物质回收率较差,可能是由于物化性质与其他化合物不同。在实际采样体积为300 m³的情况下,未发生污染物穿透现象;分析物检出限低于2×10^-4 ng/Nm³,提取内标回收率在56%~126%之间(一溴代联苯醚除外)。实验结果表明该方法能对化合物准确定量,适用于大气中二至十溴代联苯醚和BB153的分析。     

Analysis of water-soluble fraction of metals in atmospheric aerosols using aerosol counterflow two-jets unit and chemiluminescent detection

A new analytical system for a semi-continuous analysis of water-soluble fraction of particulate metals is described. The system combines the continuous sampling of atmospheric aerosols into deionized water using the Aerosol Counterflow Two-Jets Unit and on-line chemiluminescent detection of water soluble fraction of metals in collected aerosols. The potential of analytical system was studied using Fe³⁺, Cu²⁺ and Co²⁺ as model metals in atmospheric aerosols. The detection limits of particulate Fe³⁺, Cu²⁺ and Co²⁺ (S/N?=?3) are 24, 41 and 0.4?ng?m^?3, respectively. The presented set-up allows the determination of concentration of water-soluble fraction of particulate metals in ‘real time’ with time resolution of 30?min. The system is sufficiently robust for the field application. The method has been applied to the measurement of selected metals in urban TSP (Total Suspended Particles) aerosols in Brno in the Czech Republic. The concentrations of particulate water-soluble Fe³⁺, Cu²⁺ and Co²⁺ were found in the range of 35 to 290, 42 to 462 and 0.5 to 9?ng?m^?3, respectively.     

Simultaneous determination of trimethyl-and triethyllead in urban dust by species-specific isotope dilution/gas chromatography-inductively coupled plasma mass spectrometry

Both (206)Pb-labeled trimethyllead (TML) and triethyllead (TEL) were synthesized from (206)Pb-enriched metallic Pb certified reference material (NIST SRM 983) and iodomethane or iodoethane through a one-process reaction in a closed system using centrifuge tubes, respectively. Organolead compounds in an urban dust reference material (BCR CRM 605) were extracted with an acetic acid/methanol (1:1) solution, which was mechanically shaken for 24 h. After adjusting the pH of the extracted solution to pH 5, the extracted organolead compounds were derivatized by tetrabutylammonium tetrabutylborate (TATB) and measured with GC-ICPMS. The analytical results of TML and TEL for BCR CRM 605 were 8.22 +/- 0.04 microg kg(-1) (mean +/- standard deviation, n = 3) and 1.12 +/- 0.06 microg kg(-1), respectively. The analytical results of TML agreed well with the certified value (7.9 +/- 1.2 microg kg(-1)).     

On the re-assessment of the optimum conditions for the determination of platinum, palladium and rhodium in environmental samples by electrothermal atomic absorption spectrometry and microwave digestion

The experimental conditions for the determination of platinum, palladium and rhodium by graphite furnace atomic absorption spectrometry (GFAAS) are re-assessed. A certified material (BCR-723) was used as a working sample and analyzed using various extraction and atomization procedures in order to find the optimal experimental conditions that enable the quantitative and reproducible detection of platinum, palladium and rhodium in environmental matrices. Evidently, literature observations regarding the atomization conditions were proven fairly adequate. However, the provision of the optimum extraction conditions revealed several parameters that lie behind the reported uncertainties. The appropriate combination between extraction conditions and atomization programs afforded a considerable improvement in the recoveries and analytical features of platinum, palladium and rhodium determination with GFAAS. Cross-examination of the analytical data with various CRMs (certified reference materials) was used to validate the robustness of the method in heterogeneous matrices bearing different element levels. Under the optimum experimental conditions the method permits the determination at concentrations as low as (LOD(3S/N)) 1.9 ng g(-1), 0.45 ng g(-1) and 0.6 ng g(-1) for Pt, Pd and Rh, respectively affording recoveries in the range of 93-101%. The method was successfully applied to the assessment of Pt, Pd and Rh accumulation in real road dust and soil samples in Greece.     

Determination of iodine and bromine compounds by ion chromatography/dynamic reaction cell inductively coupled plasma mass spectrometry.

An inductively coupled plasma mass spectrometer (ICP-MS) was used as an ion chromatographic detector for the speciation of iodine and bromine. Gradient elution using NH4NO3 at pH 10 allowed the chromatographic separation of ionic iodine (I- and IO3-) and bromine (Br- and BrO3-) species in less than 8 min. Effluents from the ion-exchange column were delivered to the nebulization system of ICP-MS for the determination of I and Br. The potentially interfering 38Ar40ArH+ and 40Ar40ArH+ at the bromine masses m/z 79 and 81 were significantly reduced in intensity (by approximately two orders of magnitude) by using 0.6 mL min(-1) O2 as a reactive cell gas in the dynamic reaction cell (DRC). Moreover, the signal-to-background ratio at iodine mass m/z 127 increased significantly when O2 was used as the reaction gas. The detection limits were in the range of 0.001-0.002 and 0.03-0.04 ng mL(-1) for various I and Br compounds, respectively, based on the peak height. The relative standard deviation of the peak areas for five injections of a 2 ng mL(-1) I-, IO3- and 20 ng mL(-1) Br-, BrO3- mixture was in the range of 3-4%. The concentrations of I and Br compounds have been determined in selected water and urine samples. The spike recoveries were in the range of 94-102% for all of the determinations. This method has also been applied to determine various I and Br compounds in an NIST RM 8435 whole-milk powder reference material and a seaweed sample obtained locally. A microwave-assisted extraction method was used to extract these compounds, which were quantitatively leached with a 10% mass/volume (m/v) tetramethylammonium hydroxide (TMAH) solution in a focused microwave field within a period of 6 min. The major components of I and Br in milk powder and seaweed were I- and Br-.     

Practical methodology for the solubility speciation analysis of ambient dust deposits for heavy metals: application to a 6-month measurement campaign

A robust and accurate method for the quantitative determination of the water-soluble and water-insoluble, Ni, Cd, Pb and Zn contents of deposited ambient dust is presented. The extraction of the soluble metal phase from deposited ambient dust has been validated using commercially available ambient dust certified reference material. Results from a 6 month measurement campaign, from July to December 2004, are presented. Quantitative analysis of the two fractions, of different aqueous solubility (referred to here as ‘solubility speciation analysis’), within deposited ambient dust is reported for the first time. Additionally, the two Bergerhoff dust deposit gauges used in parallel to acquire the dust deposit samples have shown good inter-sampler comparability. The measured total deposition fluxes compare well with those previously reported in urban and semi-rural locations around the UK.     

超声辅助萃取-气相色谱-负化学电离源质谱法测定室内灰尘样品中8种常见多溴联苯醚

建立了室内灰尘样品中8种常见多溴联苯醚(PBDEs: BDE-28、BDE-47、BDE-99、BDE-100、BDE-153、BDE-154、BDE-183和BDE-209)的气相色谱-负化学电离源质谱(GC-NCI/MS)分析方法。样品经吸尘器采集、正己烷超声萃取、浓缩后,采用GC-NCI/MS测定。结果表明,方法的加标回收率为53.2%～107.6%,日内测定的相对标准偏差(RSD)为2.8%～16.5%,日间测定的RSD为6.4%～22.6%。除了BDE-209的检出限(信噪比为3)为0.15 ng/g外,其他多溴联苯醚的检出限为0.003～0.015 ng/g。该方法灵敏度高,准确度和精密度好,简便快速,溶剂消耗量少,适用于灰尘中三溴～十溴联苯醚的测定。     

液相色谱-质谱联用法测定血液中全氟化合物

研究了快速溶剂萃取-液相色谱/质谱联用技术测定血液中PFAAs的方法。血液样品经过冷冻干燥,利用加速溶剂萃取的方法,最后使用液相色谱-质谱仪分析检测PFAAs成分。方法的回收率为74.6%~128.8%,检出限为1.10~25.1 ng/L。通过对珠江三角洲地区人群血液样本的分析,发现∑9PFAAs的浓度为26.8~557 ng/g,平均值为176±90.1 ng/g。血液中PFAAs的主要成分以PFHxA和PFOS为主,分别占血液中PFAAs浓度的20.97%和66.98%。人群血液中最常见和浓度最高的PFAAs是PFOS,而PFOA浓度相对较低。     

Determination of calcium acetylhomotaurinate in human plasma and urine by combined gas chromatography-negative-ion chemical ionization mass spectrometry

A highly sensitive and specific assay has been developed for the determination of calcium acetylhomotaurinate and the internal standard (LM 3041) at the picomole level in human plasma and urine by gas chromatography-mass spectrometry with methane as the reagent gas. After a multiple-step extraction process, the cleaned-up organic extract was derivatized with pentafluorobenzoyl chloride at ambient temperature. Subsequently, chlorination followed by amidation of the sulphonic acid group led to the N-pentafluorobenzoyl di-n-butylamide derivatives. The mass spectrometer was set to monitor the abundant [M - HF]- ions (m/z 424 and 438), which were generated in the ion source switched in the negative-ion chemical ionization mode. This assay required 1 ml of plasma or 50 microliters of urine, and the detection limit was 1 ng/ml. The accuracy of the assay was tested day by day with quality control specimens spiked blind to the analyst. The mean difference between the theoretical and actual values was less than 8%.     

In-situ separation of the matrix for the direct determination of traces of chromium, cobalt, and nickel in titanium dioxide powder by electrothermal atomic-absorption spectrometry with slurry sampling

A novel method has been developed for the direct determination of traces of chromium, cobalt, and nickel in TiO2 powder; it entails slurry sampling and electrothermal atomic-absorption spectrometry (ETAAS) with a polytetrafluoroethylene (PTFE) slurry (6% m/v) as fluorinating reagent. The factors which could affect the vaporization of the matrix and analytes were studied in detail; the fluorinating vaporization behavior of the analyte both in the slurry and in solution were also investigated. Owing to the in-situ separation of the matrix, the matrix influences were reduced significantly. The proposed method has been applied to the direct determination of traces of chromium, cobalt, and nickel in high-purity TiO2 powder without chemical pretreatment. Under the optimum experimental conditions the detection limits of the analytes (Cr, Co, and Ni) were 1.9 ng g(-1), 2.4 ng g(-1) and 5.4 ng g(-1), respectively, the relative standard deviations (RSD) were 3.4% (n=6, c=7.0 ng mL(-1)), 2.9% (n=6, c=0.70 ng mL(-1)), and 7.6% (n=6, c=4.0 ng mL(-1)), again respectively, and the characteristic masses for Cr, Co, and Ni were 8.4 pg/ 0.0044A, 9.3 pg/0.0044A, and 40.0 pg/0.0044A, respectively.