Secretory Phospholipase A2 in Dromedary Tears: a Host Defense Against Staphylococci and Other Gram-Positive Bacteria

The best known physiologic function of secreted phospholipase A₂ (sPLA₂) group IIA (sPLA₂-IIA) is defense against bacterial infection through hydrolytic degradation of bacterial membrane phospholipids. In fact, sPLA₂-IIA effectively kills Gram-positive bacteria and to a lesser extent Gram-negative bacteria and is considered a major component of the eye’s innate immune defense system. The antibacterial properties of sPLA₂ have been demonstrated in rabbit and human tears. In this report, we have analyzed the bactericidal activity of dromedary tears and the subsequently purified sPLA₂ on several Gram-positive bacteria. Our results showed that the sPLA₂ displays a potent bactericidal activity against all the tested bacteria particularly against the Staphylococcus strains when tested in the ionic environment of tears. There is a synergic action of the sPLA₂ with lysozyme when added to the bacteria culture prior to sPLA₂. Interestingly, lysozyme purified from dromedary tears showed a significant bactericidal activity against Listeria monocytogene and Staphylococcus epidermidis, whereas the one purified from human tears displayed no activity against these two strains. We have also demonstrated that Ca²⁺ is crucial for the activity of dromedary tear sPLA₂ and to a less extent Mg²⁺ ions. Given the presence of sPLA₂ in tears and intestinal secretions, this enzyme may play a substantial role in innate mucosal and systemic bactericidal defenses against Gram-positive bacteria.     

Antibacterial activity of extract and fractions from branches of Protium spruceanum and cytotoxicity on fibroblasts

The crude ethanol extract (CEE) and fractions from branches of Protium spruceanum were subjected to antibacterial and cytotoxicity assays. Compounds of the most active fraction were identified by GC-MS and LC-MS. CEE was active against 19 bacteria and the ethyl acetate fraction (EAF) showed the lowest minimum bactericidal concentration (MBC 0.3–80.0 mg/mL). Through time-kill assay was observed that EAF induced rapid bactericidal effect against Staphylococcus saprophyticus. The cytotoxicity tests against L929 fibroblasts showed great potential of EAF on the treatment of infections caused by five bacteria (MBC < IC₅₀). The results provide in vitro scientific support to the possible application of branches of P. spruceanum as antimicrobial agent that may contribute for treatment of infections.     

Quantum dot–NBD–liposome luminescent probes for monitoring phospholipase A2 activity

In this paper we describe the fabrication and characterization of new liposome encapsulated quantum dot–fluorescence resonance energy transfer (FRET)-based probes for monitoring the enzymatic activity of phospholipase A_2. To fabricate the probes, luminescent CdSe/ZnS quantum dots capped with trioctylphosphine oxide (TOPO) ligands were incorporated into the lipid bilayer of unilamellar liposomes with an average diameter of approximately 100 nm. Incorporating TOPO capped quantum dots in liposomes enabled their use in aqueous solution while maintaining their hydrophobicity and excellent photophysical properties. The phospholipid bilayer was labeled with the fluorophore NBD C₆-HPC (2-(6-(7-nitrobenz-2-oxa-1,3-diazol-4-yl)amino)hexanoyl-1-hexa decanoyl-sn-glycero-3-phosphocholine). The luminescent quantum dots acted as FRET donors and the NBD dye molecules acted as FRET acceptors. The probe response was based on FRET interactions between the quantum dots and the NBD dye molecules. The NBD dye molecules were cleaved and released to the solution in the presence of the enzyme phospholipase A_2. This led to an increase of the luminescence of the quantum dots and to a corresponding decrease in the fluorescence of the NBD molecules, because of a decrease in FRET efficiency between the quantum dots and the NBD dye molecules. Because the quantum dots were not attached covalently to the phospholipids, they did not hinder the enzyme activity as a result of steric effects. The probes were able to detect amounts of phospholipase A₂ as low as 0.0075 U mL^?1 and to monitor enzyme activity in real time. The probes were also used to screen phospholipase A₂ inhibitors. For example, we found that the inhibition efficiency of MJ33 (1-hexadecyl-3-(trifluoroethyl)-sn-glycero-2-phosphomethanol) was higher than that of OBAA (3-(4-octadecyl)benzoylacrylic acid).     

Synthesis,characterization, antimicrobial activity and ultrastructure of the affected bacteria of new quinoline compounds

The reaction on 8-hydroxy quinoline-7-aldehyde azo compounds (HL _n ) (where n = 1–5) with 4-amino-1,2-dihydro-2,3-dimethyl-1-phenylpyrazol-5-one to obtain HL _n (where n = 6–10) have been characterized by means of TLC, melting point and spectral data, such as IR, ¹H NMR, mass spectra and thermal studies. The X-ray diffraction patterns of two starting materials 8-hydroxy quinoline-7-aldehyde (start 1), 4-amino-1,2-dihydro-2,3-dimethyl-1-phenylpyrazol-5-one (start 2) and the ligands (HL_5,10) are investigated in powder form. All the ligands have been screened for their antimicrobial activity against four local bacterial species, two Gram-positive bacteria (Bacillus cereus and Staphylococcus aureus) and two Gram-negative bacteria (Escherichia coli and Klebsiella pneumoniae) as well as against four local fungi; Aspergillus niger, Alternaria alternata, Penicillium italicum and Fusarium oxysporium. The results show that the azo ligands (HL _n ) (where n = 1–5) have no antimicrobial activity against bacteria and fungi while most azomethine ligands (HL _n ) (where n = 6–10) are good antibacterial agents against E. coli and K. pneumoniae as well as antifungal agents against P. italicum and A. alternata. The results were compared to standard substances (start 1) and (start 2). Among the azomethine ligands, HL₁₀ was the most effective against the most microorganisms tested. The size of clear zone was ordered as p-(OCH₃ < CH₃ < H < Cl < NO₂) as expected from Hammett’s constant (σ ^R ). Also, the ultrastructure study of the affected bacteria confirmed that HL₈ is good antibacterial agent against E. coli and S. aureus.     

Synthesis and cure kinetics of diphenyl(diphenylethynyl)silane monomer

Diphenyl(diphenylethynyl)silane ((ph–C≡C)₂–Si–ph₂) (DPDPES) was synthesized by the Grignard reaction. The corresponding isothermal and non-isothermal cure kinetics of DPDPES were analyzed by using differential scanning calorimetry (DSC), and the molecular structure was characterized by H-NMR. The results showed that all the cure curves were typically sigmoid shape and cure reactions could be described by an autocatalytic kinetic model by isothermal DSC. The kinetic data, for example, activation energy (E) and frequency factor (A), were 119.22 kJ/mol and 4.67 × 10⁷ (s^?1), respectively. The non-isothermal DSC analyses showed that E and A were 162.12 kJ/mol and 1.32 × 10⁹ (s^?1), respectively, and the reaction order was 0.94. Based on the research work of this paper, it can be said that the cure reaction of DPDPES monomer was of autocatalytic and diffusion-controlled characteristics, and the effect of the diffusion was more evident at low temperature. The cure reaction of DPDPES was a first-order kinetic reaction.     

Conformational properties of 1-methyl-1-germacyclohexane: low-temperature NMR and quantum chemical calculations

The conformational preference of the methyl group of 1-methyl-1-germacyclohexane was studied experimentally in solution (low-temperature ¹³C NMR) and by quantum chemical calculations (CCSD(T), MP2 and DFT methods). The NMR experiment resulted in an axial/equatorial ratio of 44/56 mol% at 114 K corresponding to an A value (A = G _ax ? G _eq) of 0.06 kcal mol^?1. An average value for ΔG _e→a ^#  = 5.0 ± 0.1 kcal mol^?1 was obtained for the temperature range 106–134 K. The experimental results are very well reproduced by the calculations. CCSD(T)/CBS calculations + thermal corrections resulted in an A value of 0.02 kcal mol^?1, whereas a ΔE value of ?0.01 kcal mol^?1 at 0 K was obtained.     

Ab Initio rovibrational spectrum of the NaH2 + ion–quadrupole complex

The electronic and rovibrational structure of (¹A₁) NaH₂ ⁺ has been investigated using a relativistically-corrected, all-electron coupled-cluster with singles, doubles and perturbative triples (CCSD(T)) ansatz. For the electronic ground state this ansatz yielded equilibrium Na–H bond lengths (R _e ) of 2.4208 Å and an equilibrium H–Na–H bond angle (θ_e) of 17.8°. An analytical potential energy surface (PES) was embedded in the rovibrational Hamiltonian. The PES was constructed using 118 CCSD(T) points and exhibited a residual error of 1.2 cm^?1. The rovibrational Hamiltonian was diagonalised using variational techniques. The vibrational and rovibrational eigenvectors were assigned using a configuration weight scheme in terms of normal modes and the Mulliken assignment scheme, respectively. For the ground vibrational state of (¹A₁) NaH₂ ⁺, the vibration-averaged bond lengths 〈R〉 and angle 〈θ〉 were 2.4995 Å and 17.1°, respectively. The ab initio (¹A₁) NaH₂ ⁺ PES yielded a dissociation energy (D ₀) value of 10.3 kJ mol^?1, which is in excellent agreement with the experimental value of 10.3 ± 0.8 kJ mol^?1 (Bushnell et al. in J Phys Chem 98:2044, 1994). An analytical dipole moment surface was constructed using 90 CCSD(T) points. Rovibrational spectra of (¹A₁) NaH₂ ⁺, (¹A′) NaHD⁺ and (¹A₁) NaD₂ ⁺ for v ≤ 10, J ≤ 5 were constructed using rovibrational transition moment matrix elements calculated in a novel manner that employs the analytical dipole moment surface (DMS). The rovibrational structure of the Na⁺–H₂ v _HH = 1 ← v _HH = 0 band was calculated and compared to that of Li⁺–H₂.     

99mTc-labeling of a dithiocarbamate-DWAY fragment using [99mTcN]2+ core for the preparation of potential 5HT1A receptor imaging agents

1-(2-methoxy phenyl) piperazine fragment of WAY100635 or its phenolic analogue, derived from DWAY is used to design the desired structure of 5HT_1A receptor imaging agents. In this study a DWAY analogue was labeled with ^99mTc-nitrido ([^99mTcN]²⁺) core via dithiocarbamate. 2-(piperazin-1-yl) phenol dithiocarbamate was synthesized by the reaction of 2-(piperazin-1-yl) phenol with an equivalent amount of carbon disulfide in KOH solution then radiolabeled with ^99mTc-nitrido core. The final complex was characterized by HPLC and its radiochemical purity was more than 90 %. In vitro stability studies have shown the complex was stable at least 4 h after labeling at room temperature. The n-octanol/water partition coefficient experiment demonstrated log p = 1.34 for ^99mTcN–OHPP–DTC. Biodistribution results showed that radio tracer had moderate brain uptake (0.39 ± 0.03 %ID/g at 15 min and 0.29 ± 0.02 %ID/g at 120 min) and good retention, suggesting that this complex may lead to a further development of a radiotracer with specific binding to 5-HT_1A receptor.     

A study of non-isothermal kinetics of limestone decomposition in air (O2/N2) and oxy-fuel (O2/CO2) atmospheres

The non-isothermal experiments of limestone decomposition at multi-heating rates in O₂/N₂ and O₂/CO₂ atmospheres were studied using thermogravimetry. The limestone decomposition kinetic model function, kinetic parameters of apparent activation energy (E), and pre-exponential factor (A) were evaluated by Bagchi and Malek method. The results shown that in 20 % O₂/80 % N₂ atmosphere, the limestone decomposed slowly following the contracting sphere volume model controlled by boundary reaction (spherical symmetry) in two stages, and the E increased by about 50 kJ mol^?1 in the second decomposition stage. But in 20 % O₂/80 % CO₂ atmosphere, the presence of high-concentration CO₂ significantly inhibited the limestone decomposition, and made the decomposition process occur at high temperature with a rapid rate; the decomposition kinetics was divided into three stages, the first stage was an accelerated decomposition process following the Mampel Power law model with the exponential law equation, the second stage followed the nth order chemical reaction model as an α–t deceleration process, and the third stage belonged to the random nucleation and nuclei growth model with the Avrami–Erofeev equation. And with the heating rate increasing, the reaction order n showed a slight rise tendency. The E was about 1,245 kJ mol^?1 in 20 % O₂/80 % CO₂ atmosphere, but was only about 175 kJ mol^?1 in 20 % O₂/80 % N₂ atmosphere. The E and A increased markedly in the O₂/CO₂ atmosphere.     

Hydrogen bonding and structural complexity in the Cu<Subscript>5</Subscript>(PO<Subscript>4</Subscript>)<Subscript>2</Subscript>(OH)<Subscript>4</Subscript> polymorphs (pseudomalachite,ludjibaite, reichenbachite): combined experimental and theoretical study

Hydrogen bonding in the Cu₅(PO₄)₂(OH)₄ polymorphs pseudomalachite, ludjibaite and reichenbachite has been studied by low-temperature single-crystal X-ray diffraction (XRD; pseudomalachite) and solid-state density functional theory (DFT; pseudomalachite, ludjibaite, reichenbachite) calculations. Pseudomalachite at 100 K is monoclinic, P2₁/c, a = 4.4436(4), b = 5.7320(5), c = 16.9300(15) Å, β = 91.008(8)°, V = 431.15(7) ų and Z = 2. The structure has been refined to R ₁ = 0.025 for 1383 unique observed reflections with |F _o| ≥ 4σ_F. DFT calculations were done with the CRYSTAL14 software package. For pseudomalachite, the difference between the calculated and experimental H sites does not exceed 0.152 Å. Structural configurations around hydroxyl groups in all three polymorphs show many similarities. Each OH5 group is involved in a three-center (bifurcated) hydrogen bond with the H···A distances in the range of 2.141–2.460 Å and the D–H···A angles in the range of 122.41°–139.30°, whereas each OH6 group forms a four-center (trifurcated) bond (H···A = 2.093–2.593 Å; D–H···A = 122.79°–137.71°). The crystal structures of the Cu₅(PO₄)₂(OH)₄ polymorphs are based on three-dimensional frameworks of Cu and P polyhedra. The copper-centered octahedra share edges to form two-dimensional layers parallel to (100) in all three structures. The layers have square voids above and beneath PO₄ tetrahedra that link adjacent layers by sharing O atoms with two CuO₆ octahedra each. From the topological point of view, none of the polymorphs can be obtained from another by a displacive transformation, and therefore pseudomalachite, ludjibaite and reichenbachite can be viewed as combinatorial polymorphs. According to information-based structural complexity considerations, the three phases are very similar in their configurational entropies and preferential crystallization of one phase over another cannot be entropy driven and is probably governed by other mechanisms that may involve such factors as structures of prenucleation clusters, chemical admixtures, etc.     

Synthesis,characterization, and cytotoxic and antimicrobial activities of ruthenium(II) arene complexes with N,N-bidentate ligands

Three new complexes, [(η⁶-C₆H₆)RuCl(C₅H₄N-2-CH=N-Ar)]PF₆ (Ar = phenylmethylene (1), (4-methoxyphenyl)methylene (2), and phenylhydrazone (3)), were prepared by reacting [(η⁶-C₆H₆)Ru(μ-Cl)Cl]₂ with N,N′-bidentate ligands in a 1 : 2 ratio. Full characterization of the complexes was accomplished using ¹H and ¹³C NMR, elemental and thermal analyses, UV–vis and IR spectroscopy and single crystal X-ray structures. Single crystal structures confirmed a pseudo-octahedral three-legged, piano-stool geometry around Ru(II), with the ligand coordinated to the ruthenium(II) through two N atoms. The cytotoxicity of the mononuclear complexes was established against three human cancer cell lines and selectivity was also tested against non-cancerous human epithelial kidney (HEK 293) cells. The compounds were selective toward the tumor cells in contrast to the known anti-cancer drug 5-fluoro uracil which was not selective between the tumor cells and non-tumor cells. All the compounds showed moderate activity against MCF7 (human breast adenocarcinoma), but showed low antiproliferative activity against Caco-2 and HepG2. Also, antimicrobial activities of the complexes were tested against a panel of antimicrobial-susceptible and -resistant Gram-negative and Gram-positive bacteria. Of special interest is the anti-mycobacterial activity of all three synthesized complexes against Mycobacterium smegmatis, and bactericidal activity against resistant Enterococcus faecalis and methicillin-resistant Staphylococcus aureus ATCC 43300.     

Extraction and theoretical study on the complexation of the strontium cation with beauvericin

From extraction experiments and γ-activity measurements, the extraction constant corresponding to the equilibrium Sr²⁺(aq) + 2A^?(aq) +1(nb) ? 1·Sr²⁺(nb) + 2A^?(nb) taking place in the two-phase water–nitrobenzene system (A^? = picrate, 1 = beauvericin; aq = aqueous phase, nb = nitrobenzene phase) was evaluated as log K _ex(1·Sr²⁺,2A^?) = ?0.6 ± 0.1. Further, the stability constant of the 1·Sr²⁺ complex in nitrobenzene saturated with water was calculated for a temperature of 25 °C: log β _nb(1·Sr²⁺) = 8.5 ± 0.1. Finally, by using quantum-mechanical DFT calculations, the most probable structure of the resulting cationic complex 1·Sr²⁺ was derived.     

The surface oxidation behavior of Ni–45.16%Ti shape memory alloys at different temperatures

The isothermal oxidation behavior of Ni–45.16%Ti (composition in atomic percent) alloy was investigated by thermogravimetric analysis, and differential scanning calorimeter (DSC) methods. It was found that Ni-rich NiTi alloy exhibits a different oxidation behavior at temperatures above 400 °C in oxygen atmosphere. The alloy was exposed to oxygen atmosphere isothermally, i.e., between 400 and 800 °C, for 1 h. A gravimetric method was used to determine the oxidation kinetics and it was seen that the oxidation constant increases significantly with isothermal temperature. The activation energy of oxidation reaction for NiTi alloy was determined to be 65.47 kJ mol^?1. According to DSC measurements, the transformation temperature of alloy (M _s, M _f, A _s and A _f) was increased and also R phase disappeared above 500 °C. The formal oxides were determined by means of SEM–EDX measurements and obtained oxides are TiO and TiO₂ oxides.     

4-Aminothiophenol functionalized gold nanoparticles as colorimetric sensors for the detection of cobalt using UV–Visible spectrometry

The 4-aminothiophenol functionalized gold nanoparticles (4-ATP-Au NPs) were used as colorimetric sensors for the detection of Co²⁺ in aqueous solution by using UV–Visible spectrometry. The 4-ATP-Au NPs were characterized by UV–Visible, FT-IR, TEM and dynamic light scattering (DLS) which confirmed their higher binding affinity towards Co²⁺ through coordinate covalent interactions that can be observed with the naked eye. The absorbance ratio (A₅₇₀/A₅₂₃) was linear with Co²⁺ concentration in the range of 15 × 10^?3 to 1 × 10^?3 M with a correlation coefficient of (R ²) 0.994, and the limit of detection was 5.79 × 10^?5 M.     

Dilatometric study of phase transformations in advanced high-strength bainitic steel

The work deals with dilatometric studies of a new-developed advanced high-strength bainitic 3Mn–1.5Al steel. Ferritic, bainitic and martensitic phase transformations are investigated in detail in respect of their temperature range forming and microstructures produced under various conditions of both continuous and isothermal cooling. The equilibrium temperatures of A _e1 and A _e3 and phase composition of the investigated steel were initially calculated whereas critical temperatures of A _c1 and A _c3 as well as the decomposition of retained austenite were determined upon heating. The major tests consisted of controlled cooling of undeformed or plastically deformed austenite using the dilatometer within the cooling rate range of 2–0.5 °C s^?1. The effects of the cooling rate and deformation at temperatures of 900 and 1,050 °C on the phase transformation behaviour and microstructure were explained. The final experiment was carried out using a thermo-mechanical simulator under conditions of multi-step deformation and isothermal holding of the steel at 400 °C. Microstructural features were revealed using light microscopy and scanning electron microscopy techniques.     

Calaxanthones A-C,three new xanthones from the roots of Calophyllum calaba and the cytotoxicity

Three new xanthones, named calaxanthones A-C (1–3), along with 17 known xanthones (4–20) were isolated from the roots of Calophyllum calaba. Their structures were determined by spectroscopic analysis. All isolated compounds were evaluated for their cytotoxicity against five cancer cell lines (KB, HeLa S-3, HT-29, MCF-7 and HepG-2). Compound 3 showed potent cytotoxicity against all the five cancer cell lines with IC₅₀ values in the range of 0.82–5.04 μM. Furthermore, compound 6 showed potent cytotoxicity against KB, HeLa S-3 and HepG2 cells with IC₅₀ values of 7.06, 5.27 and 9.64 μM, respectively. Additionally, compound 7 showed potent cytotoxicity against KB cell with an IC₅₀ value of 4.62 μM.     

Self-assembly of the light-harvesting complex of photosystem II (LHCII) on alkanethiol-modified gold electrodes

A light-harvesting complex of photosystem II (LHCII), isolated from spinach, was immobilized onto a gold electrode modified with self-assembled monolayers (SAMs) of alkanethiols, NH₂–(CH₂) _n –SH, n = 2, 6, 8, 11; HOOC–(CH₂)₇–SH; and CH₃–(CH₂)₇–SH; and a bare electrode. The extent of LHCII complex adsorption according to surface treatment decreased in the order amino groups > carboxylic acid groups > methyl groups and increased with the methylene chain length in NH₂–(CH₂) _n –SH. Interestingly, the photocurrent density depended on the terminal group and the methylene chain length in NH₂–(CH₂) _n –SH and decreased in the order amino groups > methyl groups > carboxylic acid groups. An efficient photocurrent response of the LHCII complex on SAMs of NH₂–(CH₂) _n –SH, n = 8 was observed upon illumination at 680 nm. These results indicated that the LHCII complexes were well organized on the cationic surfaces of the gold electrodes modified with amino alkanethiols. The quantum yield depended on the methylene chain length (n), where the maximum photocurrent response was observed at n = 8, which corresponded to a distance of 1.7 nm between the terminal amino group in NH₂–(CH₂)₈–SH and the gold surface.     

Human Saliva-Based Quantitative Monitoring of Clarithromycin by Flow Injection Chemiluminescence Analysis: A Pharmacokinetic Study

Human saliva quantitative monitoring of clarithromycin (CLA) by chemiluminescence (CL) with flow injection analysis was proposed for the first time, which was based on the quenching effect of CLA on luminol–bovine serum albumin (BSA) CL system with a linear range from 7.5?×?10^?4 to 2.0 ng/ml. This proposed approach, offering a maximum sample throughput of 100 h^?1, was successfully applied to the quantitative monitoring of CLA levels in human saliva during 24 h after a single oral dose of 250 mg intake, with recoveries of 95.2～109.0 % and relative standard deviations lower than 6.5 % (N?=?7). Results showed that CLA reached maximum concentration of 2.28?±?0.02 μg/ml at approximately 3 h, and the total elimination ratio was 99.6 % in 24 h. The pharmacokinetic parameters including absorption rate constant (0.058?±?0.006 h^?1), elimination rate constant (0.149?±?0.009 h^?1) and elimination half-life time (4.66?±?0.08 h) were obtained. A comparison of human saliva and urine monitoring was also given. The mechanism study of BSA–CLA interaction revealed the binding of CLA to BSA is an entropy driven and spontaneous process through hydrophobic interaction, with binding constant K _BSA–CLA of 4.78?×?10⁶ l/mol and the number of binding sites n of 0.82 by flow injection–chemiluminescence model. Molecular docking analysis further showed CLA might be in subdomain IIA of BSA, with K _BSA–CLA of 6.82?×?10⁵ l/mol and ΔG of ?33.28 kJ/mol.