编码模板误差引起测量光谱图像改变的分析

针对编码模板存在的各种不同误差情况,确定了相应的循环编码矩阵.根据阿达玛变换成像光谱仪的编码和解码原理,通过比较解码得到光谱图像和原始图像.分析了光谱图像在编码模板存在各种不同误差的情况下,随编码模板误差的变化情况,得到了光谱图像随编码模板误差变化的大致范围和基本关系.     

空间调制干涉型阿达玛变换光谱成像仪

简要叙述了色散型阿达玛变换光谱成像仪的原理及仪器构成,指出其存在空间信息与光谱信息的错位和光谱分辨率受阿达玛编码模板码元宽度制约的缺陷.提出空间调制干涉型阿达玛变换光谱成像技术原理及仪器,利用横向剪切干涉仪获得所有阿达玛编码光信息在不同光程差处的干涉信号,对干涉谱进行傅哩叶变换和阿达玛变换得到目标的光谱.理论分析表明,干涉图的调制度不受阿达玛模板形状、大小等因素的影响,光谱分辨率与阿达玛模板的尺寸无关,不但避免了色散型阿达玛变换光谱成像仪中空间信息和光谱信息的错位,而且高能量通过率、高空间分辨率和高光谱分辨率成像容易同时实现.     

一种混合混沌虚拟光学图像加密方法

用共参数的两种混沌系统生成可置换传统双随机相位编码系统中随机相位模板的新模板.将明文图像编码为相位信息,克服原双随机相位编码系统对第一块相位模板不敏感的缺陷;构建可产生均匀非相关随机序列的广义Fibonacci混沌系统,生成均匀分布的相位模板进行图像加密,提高密钥传输效率及系统对密钥的敏感性;对一次加密得到的复值图像,采用提取其振幅及相位的替代操作进行再加密,解决其像素值不能通过按位"异或"进行替代的问题,使密文图像分布更均匀,信息熵达到7.995 8,能有效抵御统计分析攻击.在二次加密中,将产生加密模板的混沌初值与一次加密得到的密文联系,像素数改变率达到0.995 239,更接近理想期望值,增强了系统对明文的敏感性,有效抵御选择明文攻击.仿真实验表明,该方法有效增加了密钥空间和密钥敏感性,提高了加密系统加密效率和安全性.     

液晶空间光调制器在阿达玛变换光谱仪中的应用研究——快速精确的解码方法

研究了液晶空间光调制器(LC-SLM)作为固定不动的编码模板应用于阿达玛变换光谱仪(HTS),提出了快速精确的解码方法,给出了由液晶空间光调制器编码模板所带来的均方根信噪比的改善.     

二维阵列狭缝阿达玛光谱仪波长准确度研究

二维阵列狭缝模板是阿达玛编码模板的一种新的设计思想,分析了模板上同列狭缝的加工误差对仪器波长准确度的不利影响,在此基础上,给出了减少同列狭缝高度、垂直光谱维方向上位置不一致性误差对仪器波长准确度影响的方法,以及同列狭缝在光谱维方向上位置不一致导致解码所得谱线产生的光谱偏移量的粗略估计方法,并建立模型进行仿真,计算了当模板上某列狭缝存在宽度、光谱维方向上位置不一致性误差时,解码所得其他各列狭缝谱线分布上测量误差的大小,根据仿真结果可以初步确定模板的加工精度。通过该研究有助于合理设计MEMS(微机电系统)二维阵列狭缝模板,获得对系统误差的有效补偿,提高仪器的波长准确度。     

深能级缺陷对半绝缘InP材料电学补偿的影响

对铁掺杂和高温退火非掺杂磷化铟制备的两种半绝缘材料的电学补偿和深能级缺陷进行了分析和比较.根据热激电流谱(TSC)测得的深能级缺陷结果，分析了这两种半绝缘InP材料中深能级缺陷对电学补偿的影响.在掺铁半绝缘InP材料中，由于存在高浓度的深能级缺陷参与电学补偿，降低了材料的补偿度和电学性能.相比之下，利用磷化铁气氛下高温退火非掺InP获得的半绝缘材料的深能级缺陷浓度很低，通过扩散掺入晶格的铁成为唯一的深受主补偿中心钉扎费米能级，材料表现出优异的电学性质.在此基础上给出了一个更为广泛的半绝缘InP材料的电学补偿模型.     

压缩感知光谱成像技术的编码孔径与探测器匹配优化

编码孔径光谱成像仪在实际应用中存在着编码模板与探测器分辨率不匹配从而降低系统分辨率的问题。针对该问题进行了两种情况分析,并通过数学理论建模给出了相应的解决方案。对于编码模板分辨率高于探测器分辨率这一情况,提出引入邻域嵌入超分辨技术的方法,实现了基于压缩感知的超分辨光谱成像。对于编码模板分辨率低于探测器分辨率这一情况,提出区块阈值划分的编码孔径,将编码微元按照区块阈值重新划分并进行灰度分级,从而实现低分辨率编码模板的高分辨率编码孔径。利用梯度投影稀疏重构(GPSR)算法进行数据立方体重建,实验结果表明:运用基于超分辨理论的编码孔径快照光谱成像系统所测得的光谱图像更精准,内容更丰富;采用基于区块阈值划分的编码孔径的编码孔径快照光谱成像系统具有更高的空间分辨率和光谱分辨率。结果证实优化后的编码孔径快照光谱成像系统,其分辨率和成像质量大幅度提升,并实现了高分辨率元件的100%利用。     

干涉多光谱卫星图像序列编码

星载干涉多光谱图像序列通过图像匹配实行定位形成光谱序列,相邻图像之间具有很强的相关性,与一般图像序列不同的是,相邻图像之间具有明显的平移特点。为了充分利用这一特点实现有效的图像压缩,同时减少编码系统复杂度,提出了一种新的图像序列编码方法,通过小波域系数匹配算法检测出相邻图像之间的相对位移量,然后对差值图像进行类似于单幅图像的编码,从而提高了总体编码效率。本算法具有与相同单幅图像编码算法相当的低复杂度特点,只需要对单幅图像与模板的差值进行基于小波变换的编码,从而避免了基于三维小波变换的编码算法对系统存储量要求大以及编码延时大的缺陷。仿真结果表明,本算法比基于三维小波变换的编码算法效果更好。     

基于混沌的改进双随机相位编码图像加密算法

针对菲涅耳域双随机相位编码提出的一种改进图像加密系统。该系统通过预先将原图像编码为相位信息克服了原算法对第一块相位模板和第一次衍射距离不敏感的缺陷。在双随机相位编码模块后基于复值图像振幅及相位替代的再次加密,使得加密图像像素值分布更为均匀。另外,改进算法引入三种不同的混沌系统来生成所需要的随机模板,借助于混沌系统的非线性性、初值敏感性,加密系统在减小密钥体积的同时增大了密钥空间、增加了系统的复杂性。仿真实验对算法进行了有效性分析、统计分析以及密钥敏感性测试,结果表明改进的算法有效提升了原算法的安全性。     

基于双线性插值最值滤波的Mura改善方法

为改善液晶面板的Mura缺陷,提出了一种灰度补偿校正Mura缺陷的方法.针对典型灰度级的亮度分布矩阵,采用双线性插值最值滤波法进行图像滤波,计算全屏目标亮度,根据各像素点拟合出的亮度-灰度关系曲线,得到各灰度级的补偿数据.实验结果表明,经过Mura补偿,55英寸的液晶模组上显示灰度图像的Mura条纹消失,Mura指数降低,且补偿并未对屏幕总体亮度和对比度等造成明显改变.     

A New Algorithm for Die-to-Wafer-like Image Mask Inspection in Real Time

The effect of variations in defect printability must be considered in order to correctly evaluate mask defect inspection procedures. Because of nonlinear transfer effects and strong dependence of printability on defect types, it is difficult to define the boundary between real defect and false defect. To overcome this problem we developed a new algorithm for die-to-wafer-like image (D-to-WI) inspection in real time. This inspection method compares the die (wafer image calculated from CAD data) with the wafer-like image (WI) calculated from the mask image detected by the mask inspection system. To precisely calculate WI in real time, we developed a new simulation-based software. Since the phase of a mask inspection image cannot be measured, we introduce some assumptions regarding its phase. Moreover, we introduce some corrections for WI such as adding a DC component and multiplying by a proper value. To calculate the die which realizes the desired image with sufficient accuracy in real time, we also introduce a perturbation approach. We demonstrate numerically the possibility of a new algorithm for D-to-WI inspection. We confirm that this technique of generating WI from a measured mask pattern is well suited for attenuated phase shift masks (PSMs) and Cr binary masks.     

二维负磁导率材料中的缺陷效应

研究了以金属铜六边形开口谐振环为基元的二维负磁导率材料的缺陷效应.利用电路板刻蚀 技术制备了二维负磁导率材料样品.采用波导法测量了点缺陷和线缺陷对二维负磁导率材料X 波段(8—12GHz)微波透射行为的影响.实验发现，无缺陷的二维负磁导率材料样品存在一个 谐振频率，在稍大于该谐振频率的极窄区域内表现为负磁导率.点缺陷和线缺陷SRR的引入导 致材料主谐振峰的强度下降、谐振频率发生移动，品质因数Q显著下降.缺陷的存在破坏 了材料的周期性结构，从而引起其谐振峰的谐振强度和谐振频率发生变化.缺陷效应的研究 不 关键词： 负磁导率 缺陷效应 开口谐振环     

Digital encryption with undercover multiplexing by scaling the encoding mask

We introduce the technique to get the undercover multiplexing of a set of encrypted data. We base the general encryption approach on the double-random phase encoding method. We made the encoding phase masks with scaled versions of a master speckle pattern. A fake object is encrypted using a master mask made with the master speckle pattern. Each subsequent object to be hidden is associated to a suitable different scaled version of the original master mask. We apply the term suitable referring to avoid a possible cross-talk in the final decrypted images. All encrypted data are multiplexed to form a single message. This operation enables the true information undercover. We openly send this undercover message along with the master mask. Via separated private channels, we send the information on the actual scaling for each encrypting mask to the authorized users. Unauthorized users attempting to recover the information by using the master mask alone, get the fake object. During decryption of the multiplexed message, we only reconstruct the object that matches the predetermined scaled version of the master mask used to encode it. We show results that confirm our approach.     

Ga<Subscript>Zn</Subscript>-V<Subscript>Zn</Subscript> acceptor complex defect in Ga-doped ZnO

Gallium (Ga)-doped ZnO is regarded as a promising plasmonic material with a wide range of applications in plasmonics. In this study, zinc self-diffusion experiments are adopted to disclose the nature of the dominant compensating defect in Ga-doped ZnO isotopic heterostructures. The (Ga_Zn-V_Zn)^? complex defect, instead of the isolated V_Zn^2?, is identified as the predominant compensating acceptor center responsible for the low donor doping efficiency. The comparative diffusion experiments operated by the secondary ion mass spectrometry reveal a ~0.78 eV binding energy of this complex defect, which well matches the electrical activation energy derived from the temperature-dependent Hall effect measurements (~(0.82±0.02) eV). These findings contribute to an essential understanding of the (Ga_Zn-V_Zn)^? complex defect and the potential engineering routes of heavily Ga-doped ZnO.     

相位编码光学加密算法的扩散及混淆特性分析

为了阐明相位编码光学加密算法的扩散及混淆特性,基于傅里叶变换位移定理,从分组密码设计准则出发,以双随机相位光学加密算法为研究对象,分析了采用单个随机相位模板的2 f系统的扩散和混淆特性。将单随机相位加密过程分解为2个相互关联的过程,结果表明,傅里叶变换在加密算法中引入了混淆操作,而傅里叶变换结合随机相位模板实现了扩散操作。通过数值模拟对上述理论分析进行了验证,引入信息熵来评价加密图像的统计分布特性,进一步分析了菲涅尔域及分数阶傅里叶变换域随机相位加密算法的扩散混淆特性。研究表明,单随机相位加密和双随机相位加密图像的信息熵分布为7.038和7.157,而随机振幅加密图像信息熵为4.521。因而,随机相位加密算法比随机振幅加密算法能实现对信息更好地扩散。     

Fractional Fourier-domain random encoding and pixel scrambling technique for double image encryption

A double image encryption method is proposed using fractional Fourier-domain random encoding and pixel scrambling technique. One of the two original images is encoded into the phase function of a synthesized input signal after being scrambled, and the other original image encoded into its amplitude. The phase function serves as phase mask in the input domain, and the synthesized input signal is then encrypted into stationary white noise by utilizing random phase encoding in fractional Fourier domain. The two original images can be retrieved without cross-talk by using the correct keys with fractional orders, the random phase mask and the pixel scrambling operator. Numerical simulations and security analysis have been done to prove the validity and the security of the proposed encryption method.     

Broadband dispersion compensating fiber using index-guiding photonic crystal fiber with defected core

We present a novel broadband dispersion compensating photonic crystal fiber with defected core in this paper. The small central defect of air hole can flexibly control the chromatic dispersion properties of this kind of photonic crystal fiber. This kind of fiber has broadband large negative chromatic dispersion, and the chromatic dispersion coefficient varies from -440 to -480 ps/（nm.km） in the measured wavelength range of 1500 - 1625 nm. The calculated chromatic dispersion curve is well matched to the measured chromatic dispersion coefficient in the range of 1500 - 1625 nm. The proposed photonic crystal fiber can be used to design the dispersion compensating fiber in the desired wavelength range by adjusting its structural parameters.     

Spatial encoding and the single-scan acquisition of high definition MR images in inhomogeneous fields

We have recently proposed a protocol for retrieving multidimensional magnetic resonance spectra and images within a single scan, based on a spatial encoding of the spin interactions. The spatial selectivity of this encoding process also opens up new possibilities for compensating magnetic field inhomogeneities; not by demanding extreme uniformities from the B(0) fields, but by compensating for their effects at an excitation and/or refocusing level. This potential is hereby discussed and demonstrated in connection with the single-scan acquisition of high-definition multidimensional images. It is shown that in combination with time-dependent gradient and radiofrequency manipulations, the new compensation approach can be used to counteract substantial field inhomogenities at either global or local levels over relatively long periods of time. The new compensation scheme could find uses in areas where heterogeneities in magnetic fields present serious obstacles, including rapid studies in regions near tissue/air interfaces. The principles of the B(0) compensation method are reviewed for one- and higher-dimensional cases, and experimentally demonstrated on a series of 1D and 2D single-scan MRI experiments on simple phantoms.     

集成多通道光子晶体的设计及初步实验制备

在Fabry-Perot滤光片的基础上,通过改变双通道和通带通道光子晶体中处于不同对称中心的两种缺陷层的厚度,可使相应的通道或者通带位置进行独立的移动.通过刻蚀或者补偿,使缺陷层的厚度分别在二个维度方向上发生变化,改变入射光束与光子晶体的相对位置,即可实现通道和通带通道可调谐二维光子晶体.32个通道光子晶体的初步实验结果证明了设计方案的可行性.