Oxidation of hydrogen sulfide and corrosion of stainless steel in gas mixtures containing H<Subscript>2</Subscript>S,O<Subscript>2</Subscript>, H<Subscript>2</Subscript>O,and CO<Subscript>2</Subscript>

The composition of volatile and solid products of oxidation of hydrogen sulfide and stainless steel in gas mixtures containing H₂S, O₂, H₂O, and CO₂ has been determined using mass spectrometry, x-ray diffraction analysis, and scanning electron microscopy. It has been shown that holding an H₂S–O₂ mixture at 301 K results in prevailing formation of elemental sulfur and iron sulfides in the form of porous hygroscopic crust on the reactor wall surface. Formation of gas-phase sulfur causes self-acceleration of the oxidation of hydrogen sulfide; the resulting water triggers corrosion of the reactor wall. Heating of the resulting sulfur-sulfide crust in O₂ medium is accompanied by formation of SO₂ and heat release at T > 508 K. After heating of the H₂S–CO₂ mixture to 615 K, H₂ and COS were found in the volatile reactants; no noticeable corrosion of the reactor wall has been detected. It has been established that addition of O₂ to the H₂S–CO₂ mixture and its heating to 673 K leads to formation of ferrous sulfates. The mechanisms of the observed processes are discussed.     

Molecular Simulation of H<Subscript>2</Subscript>O,CO<Subscript>2</Subscript>, and CH<Subscript>4</Subscript> Adsorption in Coal Micropores

Based on the chemical model of coal, slit micropores with different pore sizes are established and structures are optimized in the software of materials studio. As the temperature rises, absolute adsorption capacities of H₂O are slightly affected, while absolute adsorption capacities of CO₂ and CH₄ gradually decrease. As the fugacity rises, excess adsorption curves of CO₂ experience increase-decrease-gentle three stages, while the curves of CH₄ gradually decrease. With the increase of pore size, adsorption capacities of H₂O increase, while adsorption capacities of CO₂ and CH₄ gradually decrease. H₂O firstly adsorbs on the oxygen-containing functional group, so the walls of pore are the preferential area for H₂O, while CO₂ and CH₄ choose to adsorb on–C–C–, therefore the walls are the primary area for CO₂ and CH₄. Strong potential in micropores and hydrogen bond among water molecules will promote the water adsorption, while the adsorptions of CO₂ and CH₄ are only induced by the Van der Waals interaction, but the difference between adsorption density and bulk density of CO₂ and CH₄ decides the change of excess adsorption capacity.     

Accuracy in determination of the temperature and partial pressure of CO<Subscript>2</Subscript> in CO<Subscript>2</Subscript>:N<Subscript>2</Subscript>:H<Subscript>2</Subscript>O:NO<Subscript>2</Subscript> mixtures by multiple-frequency laser probing

We present the results of analysis of the errors introduced by hot-band transitions 11¹0-01¹1, 03¹0-01¹1, 12⁰0-12⁰1 of the CO₂ molecule and the absorption lines of the H₂O and NO₂ molecules in determination of the temperature and partial pressure of CO₂, included in the gas mixture CO₂: N₂:H₂O: NO₂ at atmospheric pressure, by multiple-frequency laser probing using a CO₂ laser tunable over the lines of the 00⁰1-[10⁰0,02⁰0]_I,II ground-state laser transitions. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 74, No. 6, pp. 810–815, November–December, 2007.     

Kinetics of low-temperature initiation of H<Subscript>2</Subscript>/O<Subscript>2</Subscript>/H<Subscript>2</Subscript>O mixture combustion upon the excitation of molecular vibrations in H<Subscript>2</Subscript>O molecules by laser radiation

The initiation of H₂/O₂/H₂O mixture combustion when asymmetric vibrations in H₂O molecules are excited by a resonant IR laser radiation is considered. It is shown that the vibrational excitation of the molecules gives rise to new efficient channels for the formation of chemically active O and H atoms and OH radicals. As a result, the chain mechanism of combustion in the mixtures is enhanced and, as a consequence, the induction time is cut and the ignition temperature is lowered. Even at a minor radiant energy flux delivered to the gas (E_in≈2.5 J/cm²), the ignition temperature of the stoichiometric H₂/O₂ mixture containing only 5% of H₂O may become as low as 300 K.     

Reactions C<Subscript>2</Subscript>H<Subscript>2</Subscript> + OH and C<Subscript>2</Subscript> + H<Subscript>2</Subscript>O: Ab initio study of the potential energy surfaces

The stationary points of the potential energy surfaces for the reactions C₂H₂ + OH and C₂ + H₂O are calculated using density functional theory and the coupled cluster method. The relative energies and geometric parameters of the stable intermediates and transition states are in good agreement with the results of independent studies. In most cases, the relative energies differ from the earlier published values by no more than 3 kcal/mol, whereas the rotational constants, by 1–2%. The mechanism of the reaction CCOH₂ → C₂ + H₂O is studied in detail. The possible sources of errors in the calculation methods are examined.     

Electronic energy transfer between dye molecules in structured solutions of H<Subscript>2</Subscript>O and D<Subscript>2</Subscript>O

The structure of H₂O+D₂O solutions was studied by correlation spectroscopy of scattered light. The correlation function and size of scatterers were both found to depend nonmonotonically on the D₂O concentration in the H₂O+D₂O mixture. Processes of transfer of electronic excitation energy between dye molecules of different types in H₂O+D₂O solutions were studied. The efficiency of these processes was found to depend extremally on the concentration of the components of the solution. A fractal distribution of the interacting dye molecules is ascertained from the experimental data. The dependence of the fractal dimensionality of the dye solutions on the D₂O concentration in the D₂O+H₂O mixture is determined.     

Computer calculations for thermal behavior of Na<Subscript>2</Subscript>CO<Subscript>3</Subscript>-Li<Subscript>2</Subscript>CO<Subscript>3</Subscript> melt

The thermal behavior of Na₂CO₃+Li₂CO₃ melt is studied by the method of thermodynamic simulation. The equilibrium compositions of the gas and salt phases are calculated at different temperatures in the initial argon atmosphere. Basic trends of the variation in the compositions of the melts and the gas phase above the melts in the presence of carbon are determined. The obtained results characterizing the stability of carbonate components in the melt are analyzed.     

H<Subscript>2</Subscript>O/CuIn<Subscript>3</Subscript>Se<Subscript>5</Subscript> photoelectrochemical cells: Fabrication and properties

Single-phase coarse-grained CuIn₃Se₅ ingots are grown by horizontal oriented crystallization from the near-stoichiometric melt. Photosensitive structures based on the interface between these crystals and an electrolyte (H₂O) are created. It is shown that the CuIn₃Se₅ ternary compound is a direct-gap semiconductor with an energy gap Eg ≃ 1.1 eV (T = 300 K). H₂O/CuIn₃Se₅ photoelectrochemical cells seem to be promising for efficient wide-band photodetectors of natural light.     

Electronic excitation energy transfer between dye molecules in H<Subscript>2</Subscript>O and D<Subscript>2</Subscript>O solutions in the micellar phase

Processes of electronic excitation energy transfer (EEET) in H₂O+D₂O solutions within reversed micelles with different degrees of hydration were studied. It is ascertained that the structure of solutions forms a cluster distribution of interacting molecules having a fractal dimensionality. As a result, in regions with a locally high concentration of the dye molecules, an increase in the EEET efficiency is observed. Solubilization by reversed micelles leads to destruction of the cluster structure of the water system, with the dependence of the EEET efficiency on the degree of hydration being nonmonotonic. As the degree of hydration increases, the inhomogeneities of the structure inherent in bulk water are restored.     

Study of ion–solvent interactions and activation energy of LiBr in DMSO,H<Subscript>2</Subscript>O and DMSO–H<Subscript>2</Subscript>O mixtures at various temperatures

The Jones–Dole B coefficients of the electrolyte Lithium bromide (LiBr), reference salts tetra butyl ammonium tetra phenyl borate (BU₄NBPh₄), tetra butyl ammonium bromide (BU₄NBr), and potassium chloride (KCl) in dimethylsulfoxide (DMSO), water, and DMSO–water mixtures were obtained at different temperatures range from 25 to 45 °C For this, the relative viscosities were measured for Lithium bromide (LiBr) and reference salts in DMSO, water, and DMSO–water mixtures at above-mentioned temperatures. The B coefficients of these electrolytes were behaved as structure makers in DMSO, while in H₂O and DMSO–H₂O mixtures, the B-coefficient values were less positive showing the weak structure-making effect. Ionic viscosity B coefficients allow us to assess the behavior of ions in the solvent mixtures. In this study it was observed that all the values of ionic B coefficient of (Li⁺) were positive and small showing the weak structure-making effects. It was also observed that Br⁻ ions maintain negative B coefficient values in all DMSO–H₂O mixtures, except in 60% DMSO mole fraction. From this it can be concluded that Br⁻ ion behaved as a structure breaker in water and in all DMSO–H₂O mixtures except in 60% DMSO mole fraction mixtures. The low B _± values of alkali metal ions and Br⁻ ions in water are due to the breakdown of the tetrahedral structural of water and the formation of strongly structured solvated ion. It is also observed that the values of the energy of activation of the flow for LiBr are greater in DMSO–water mixtures and in pure water than in DMSO. This may be due the presence of a network of hydrogen bonds which cause the hindrance in the flow of the solution of LiBr in DMSO–water mixtures and in pure water than in DMSO.     

Reactions of molybdenum atoms with NO,O<Subscript>2</Subscript>, N<Subscript>2</Subscript>O,and CO<Subscript>2</Subscript> molecules behind shock waves

Experimental results on the interaction of Mo atoms with various oxygen-containing molecules (NO, O₂, N₂O, and CO₂) at high temperatures (>1200 K) are presented, which are in close agreement with measurements at moderate and low temperatures. It is demonstrated that the height of the activation barrier is additionally increased for spin-forbidden reactions and that an increase in the heat of reaction causes an increase in the rate constant for a given type of reaction. For the reactions of Mo atoms with O₂ and N₂O, interpolated temperature dependences of the rate constants, based on the high-temperature measurements conducted in the present work and the published low-temperature data, are proposed.     

Anomalous absorption in H<Subscript>2</Subscript>CN and CH<Subscript>2</Subscript>CN molecules

Structures of H₂CN and CH₂CN molecules are similar to that of H₂CO molecule. The H₂CO has shown anomalous absorption for its transition 1₁₁–1₁₀ at 4.8 GHz in a number of cool molecular clouds. Though the molecules H₂CN and CH₂CN have been identified in TMC-1 and Sgr B2 through some transitions in ortho as well as in para species, here we have investigated the condition under which transitions 1₁₁–1₁₀ and 2₁₂–2₁₁ of these molecules may show anomalous absorption. For the present investigation, we have calculated energy levels and radiative transition probabilities. However, we have used scaled values for collisional rate coefficients. We found that relative values of collisional rate coefficients can produce the required anom-alous absorption in 1₁₁–1₁₀ and 2₁₂–2₁₁ transitions in the molecules.      

Femtosecond laser pulse filamentation versus optical breakdown in H<Subscript>2</Subscript>O

The competition between femtosecond laser pulse induced optical breakdown and femtosecond laser pulse filamentation in condensed matter is studied both experimentally and numerically using water as an example. The coexistence of filamentation and breakdown is observed under tight focusing conditions. The development of the filamentation process from the creation of a single filament to the formation of many filaments at higher pulse energy is characterized systematically. In addition, strong deflection and modulation of the supercontinuum is observed. They manifest themselves at the beginning of the filamentation process, near the highly disordered plasma created by optical breakdown at the geometrical focus. Received: 9 July 2002 / Revised version: 15 November 2002 / Published online: 19 March 2003 RID="*" ID="*"Corresponding author. Fax: +1-418/6562-623, E-mail: wliu@phy.ulaval.ca     

Variation in magnesium isotopic composition during zone recrystallization of MgCl<Subscript>2</Subscript>·6H<Subscript>2</Subscript>O

The variation in Mg isotopic composition during MgCl₂·6H₂O zone recrystallization was studied. It was shown that light isotope ²⁴ Mg enrichment occurs at the crystal end to which the recrystallization zone moves. Isotopes ²⁵ Mg and ²⁶ Mg concentrate in the initial crystallization zone. When the molten zone is exposed to a de magnetic field or direct current, the separation factor increases. The data obtained were compared with data on magnesium isotope separation by other physicochemical methods.     

Internal dynamics of (H<Subscript>2</Subscript>O)<Subscript>2</Subscript> and (D<Subscript>2</Subscript>O)<Subscript>2</Subscript> dimers: III. Description taking into account inversion,exchange and bifurcation motions

Using the symmetry group chain methods, the stationary states of (H₂O)₂ and (D₂O)₂ dimers that correspond to the lowest energy barriers of the inversion, exchange via an intermediate trans configuration, and bifurcation motions are classified taking into account the real geometries of the dimers. A model that rigorously describes the interactions of the motions and leads to a simple algebraic scheme for calculating of both the positions of the levels in the energy spectrum and the intensities of transitions between them is constructed. It is important that the correctness of the model is limited only by the trueness of the choice of symmetry of the internal dynamics.