Fluorous-phase soluble polymeric supports

Fluorous phase soluble polymer supports derived from fluoroacrylate polymers are described. N-Acryloxysuccinimide-containing fluoroacrylate polymers were readily prepared from commercially available monomers. The activated acrylates so prepared were then converted into chelating and non-chelating ligands by amidation of the N-acryloxysuccinimide active ester residues. Phosphine ligands attached to these supports were used to prepare neutral and cationic rhodium(I) hydrogenation catalysts as well as palladium(0) catalysts. Similar substitution of pendant active ester groups to form hydroxamic acid ligands for metal sequestration is also feasible. Liquid/liquid extraction readily separated, recycled and reused these polymer-bound ligands and catalysts. While fluorous phase solubility could be attained with polymers containing only heptafluorobutyryl groups, selective solubility in a fluorous phase in contact with an organic phase was only seen with fluoroacrylates that contained larger fluorinated ester groups.     

Soluble polyisobutylene-supported reusable catalysts for olefin cyclopropanation

Polyisobutylene oligomers (PIB) have been used as soluble supports for the immobilization of cyclopropanation catalysts. In addition to simple carboxylate ligands, chiral bisoxazolines have been successfully attached to these heptane-soluble polymers. Their use and recovery has been investigated using cyclopropanation of styrene as an example. An achiral PIB-bound Rh(II) catalyst showed good activity and could be easily recycled nine times using a liquid-liquid biphasic separation technique. PIB-supported bisoxazoline ligands for Cu(I) catalysts were also prepared. These chiral catalysts showed good catalytic activity and stereoselectivity. A chiral ligand prepared from phenylglycine provided the most effective stereocontrol and gave the trans- and cis-cyclopropanation products in 94% ee and 68% ee, respectively. All three PIB-bound chiral bisoxazoline-Cu(I) catalysts prepared could be reused five to six times.     

噻唑烷类手性配体在不对称硅氢化反应中的应用(Ⅱ)

噻唑烷类手性配体在不对称硅氢化反应中的应用（Ⅱ）＊李弘姚金水何炳林（南开大学高分子化学研究所吸附与分离功能高分子材料国家重点实验室，天津３０００７１）关键词手性配体，铑络合物，噻唑烷，苯乙酮，不对称硅氢化自８０年代末期以来，合成了许多高活性、高选择性...     

Synthesis and ring-opening polymerization of optically pure mesogenic malolactonates

Optically pure malolactonate monomers containing biphenyl mesogenic groups with either an ethylene or a hexamethylene spacer were prepared from optically pure malic acid and polymerized with alkylaluminoxane catalysts to form a series of new chiral side chain liquid-crystalline polymers, which contained the chiral centres in the backbone. The mesogenic malolactonate monomers were determined to be optically pure by ¹H NMR spectroscopy of the β-lactone complexed with a chiral europium shift reagent. Both the methylaluminoxane and isobutylaluminoxane catalysts gave polymers having bimodal molecular weight distributions, the latter catalyst yielded a larger amount of the higher molecular weight fraction than the former. The polymers showed high optical rotations, high degrees of isotactic stereoregularity, and enantiotropic liquid-crystalline properties, all of which were influenced by the molecular weight distribution. Copolymers of malolactonate monomers with different spacers were also prepared and characterized.     

Design of novel polymer-supported chiral catalyst for asymmetric transfer hydrogenation in water

New polymer-supported chiral sulfonamides containing sulfonated pendant group have been synthesized. Chiral catalyst prepared from the new polymer-support is more effective for asymmetric transfer hydrogenation of aromatic ketones in water compared to that prepared from conventional polystyrene-support. Polymer-supported catalysts containing quaternary ammonium salt as a pendant increased not only the reactivity but also the enantioselectivity in asymmetric transfer hydrogenation in water. Moreover, this type of polymer can be reused without loss of the catalytic activity.     

Modified polysulfones. III. Synthesis and characterization of polysulfone aldehydes for reactive membrane materials

Polysulfones (PSfs) containing pendant aldehyde groups have potential uses as reactive polymer supports or affinity membranes to bind enzymes and ligands. The polymeric aldehydes may also be utilized to prepare crosslinked membranes and to covalently bond inorganic species to the matrix. A series of polymers containing pendant aldehydes with degrees of substitution (DS) ranging from 0.1 to 2.0 groups per repeat unit was prepared by lithiation at the orthosulfone site and then treatment of the intermediate with dimethylformamide (DMF), a formyl equivalent electrophile. A polymer with aldehyde groups (DS 2) at the orthoether site was also prepared by lithiation of brominated PSf followed by DMF. The new polymer structures were characterized in detail by NMR spectroscopy, and their thermal properties were investigated by DSC and thermogravimetric analysis. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 675–682, 2001     

Diverse Approaches for Enantioselective C−H Functionalization Reactions Using Group 9 CpxMIII Catalysts

Transition-metal-catalyzed C−H functionalization reactions with Cp*M^III catalysts (M=Co, Rh, Ir) have found a wide variety of applications in organic synthesis. Albeit the intrinsic difficulties in achieving catalytic stereocontrol using these catalysts due to their lack of additional coordination sites for external chiral ligands and the conformational flexibility of the Cp ligand, catalytic enantioselective C−H functionalization reactions using the Group 9 metal triad with Cp-type ligands have been intensively studied since 2012. In this minireview, the progress in these reactions according to the type of the chiral catalyst used are summarized and discussed. The development of chiral Cp^x ligands the metal complexes thereof, artificial metalloenzymes, chiral carboxylate-assisted enantioselective C−H activations, enantioselective alkylations assisted by chiral carboxylic acids or chiral sulfonates, and chiral transient directing groups are discussed.     

离子液体催化CO2与环氧化物合成环状碳酸酯

综述了离子液体催化CO2与环氧化物的环加成反应制备环状碳酸酯的研究进展。目前报道的离子液体主要包括咪唑盐、季铵盐、季鏻盐等。对比了传统离子液体与功能化离子液体对CO2环加成反应的催化活性、选择性以及催化作用机制。与传统的离子液体相比,功能化离子液体的羟基或羧基等官能团与卤素离子等Lewis碱之间存在协同效应,使得其对CO2与环氧化物的环加成反应具有更好的催化活性;将功能化离子液体固载于无机材料(SiO2,SBA-15,MCM-41等)或聚合物所得的多相催化剂不仅保持了官能团与阴离子之间的协同效应,而且载体与离子液体活性组分之间也显示出协同效应,使得该类催化剂具有很好的催化活性,稳定性好,可以多次重复使用,具有较好的工业化前景,是值得深入研发的一类催化材料。此外,离子液体对于手性环状碳酸酯的合成也具有较好的催化活性和立体选择性。     

Asymmetric Ir-catalyzed hydrogenation of 1,5-benzodiazepinones using mixtures of ligands

The catalytic hydrogenation of benzodiazepinones using metal complexes with phosphite and phosphoramidite ligands was carried out for the first time. The mixed-ligand catalytic systems containing a chiral phosphoramidite or phosphite in combination with an achiral phosphine were shown to exhibit a higher enantioselectivity compared to catalysts containing homocombinations of chiral ligands.     

新形态全氟磺酸树脂催化剂研究进展

全氟磺酸树脂是绿色固体酸催化剂，对许多反应有较好的催化活性和选择性。但由于全氟磺酸树脂比表面较低，埋没在氟碳基体中的酸性中心不易被反应物所接近，质量比活性低。本文对近年来新形态全氟磺酸树脂，如多孔、负载化、纳米复合物及其改性的全氟磺酸树脂的催化作用进行了综述，文献结果表明全氟磺酸树脂纳米复合物对很多有机合成反应具有很高的催化活性。     

聚醚砜酮的磺化及其在异丁烯低聚反应中的应用

Concentrated homogeneous mineral acids have been widely used as catalysts in industrial processes for several decades. These catalysts are corrosive to the apparatus, and there are large volumes of chemically reactive waste stream that are difficult to deal with[1]. In order to solve these problems, investigators have replaced these mineral acids with solid acid catalysts. Besides inorganic solid acid catalysts such as zeolite, solid organic polymeric resins containing acid groups, especially sulfuric acid resins such as Amberlyst[2], have attracted much attention. Compared with most inorganic acid catalysts, they have the advantages of their potentially high acidity, controllable surface area and porosity[3]. This article reports a novel sulfonated poly(phthalazinone ether sulfone ketone) (S-PPESK) resin and its application to isobutene oligomerization. S-PPESK exhibits high catalytic activity and excellent dimerization selectivity.     

BINAP嵌入的多孔有机聚合物在多相不对称氢化反应中的作用

手性多孔有机聚合物具有较高的稳定性和催化活性,广泛用于多相不对称催化中.目前研究多集中在合成具有微孔结构的聚合物,而少有具有多种孔道结构(包含介孔和微孔)的聚合物的报道.之前我们报道了乙烯基修饰的BINAP配体,(S)-5,5'-divinyl-BINAP,将其与不同单体共聚后得到了一系列具有不同孔结构的有机聚合物.其负载的Rh基催化剂在苯乙烯不对称氢甲酰化反应中,表现出比均相更高的产物对映体选择性.本文采用不同的溴代步骤,合成了(S)-4,4'-divinyl-BINAP配体.将这两种具有乙烯基官能团的手性配体按相同的摩尔比与二乙烯基苯(DVB)共聚,得到两种不同的有机聚合物.负载[RuCl2(benzene)]2后,分别得到Ru/4-BINAP@POPs和Ru/5-BINAP@POPs-1.采用一锅法合成了催化剂Ru/5-BINAP@POPs-2;以[RuCl2(p-cyme)]2和RuCl3分别合成了Ru/5-BINAP@POPs-3和Ru/5-BINAP@POPs-4催化剂.N2物理吸附结果显示,Ru/4-BINAP@POPs和Ru/5-BINAP@POPs-1催化剂具有相似的孔道结构;而采用一锅法合成的Ru/5-BINAP@POPs-2催化剂的介孔孔径较大.4-BINAP@POPs和5-BINAP@POPs聚合物的13C核磁显示,其均在145,137和128 ppm处有明显的吸收峰,可归结为萘环和苯环上的碳振动峰;在44.0 ppm处的峰归属为亚甲基上的碳振动峰;31P核磁显示,在聚合物中P基本没有被氧化.将所得到的Ru/POPs催化剂应用于乙酰乙酸甲酯的多相不对称加氢反应中,Ru/5-BINAP@POPs-1催化剂具有与Ru/4-BINAP@POPs更快的反应速率.在相同反应条件下,催化剂活性大小为Ru/5-BINAP@POPs-1>Ru/5-BINAP@POPs-3>Ru/5-BINAP@POPs-4>Ru/5-BINAP@POPs-2.另外Ru/5-BINAP@POPs-1催化剂对β-酮酸酯有着较好的底物适应性,且在釜式反应中可循环使用6次而活性基本不变.分析发现,使用前后的催化剂均没有明显的Ru–Ru键的存在.表明Ru金属高度分散于催化剂上,且具有较高的稳定性,金属不易聚集,这也是其具有高活性和稳定性的原因.     

Synthesis of acetylene-terminated polymers using supported palladium (II) catalysts

A polymer-bound palladium catalyst was synthesized from palladium diacetate and a single crystal polyethylene having 2,2′-bipyridyl moieties as pendant groups. The resulting material was used in place of a free palladium catalyst in the synthesis of acetylene-terminated resins. Supports other than polyethylen were also tested for their ability to bind palladium and their subsequent activity as catalysts in the synthesis of acetylene-terminated polymers.     

Enantioselective allylation of aldehydes catalyzed by chiral indium(III) complexes immobilized in ionic liquids

In the presence of chiral catalytic complexes prepared from In(OTf)3 and chiral PYBOX ligands, allytributylstannane reacted with aldehydes in ionic liquids to afford the corresponding homoallylic alcohols in high enantioselectivities (86-94% ee) and good yields (68-89%); the chiral catalysts immobilized in ionic liquids could be reused with comparable enantioselectivities and yields.     

Controlling stereochemical outcomes of asymmetric processes by catalyst remote molecular functionalizations: chiral diamino-oligothiophenes (DATs) as ligands in asymmetric catalysis

The synthesis, characterization, and structure-guided application of a new class of highly versatile chiral C(2)-symmetric diamine-oligothiophene ligands in Pd-catalyzed asymmetric transformations are presented. Experimental investigations of the intimate role of pendant pi-conjugate oligothiophenes in determining the catalytic activity of the corresponding chiral Pd complexes are described. Their unusual behavior opens up new routes toward the logical design of finely tuned organometallic catalysts by remote structural functionalizations.     

Synthesis of chiral polyphenylenes through Bergman cyclization of enediynes with pendant chiral amino ester groups

Chiral enediynes with pendant chiral amino ester groups are synthesized through Sonogashira reactions and subjected to thermal triggered Bergman cyclization at elevated temperatures either in bulk or in solvents to produce chiral polyphenylenes. The disappearance of enediyne monomers are evidenced by FTIR and NMR spectroscopies. The formation of polyphenylenes is further confirmed by UV-Vis and MALDI-TOF mass spectroscopies(MS). Isotope pattern analysis of the MS spectra shows that the polymers prepared in solvents are terminated by the solvent molecules, whereas the chain ends of the polymers prepared in bulk consist of considerable amount of unmasked free radicals, which is further confirmed by EPR analysis. Circular dichroism(CD) spectra of the chiral polymers show blue shifts of the Cotton peaks, indicating the occurrence of the cycloaromatization reaction. A new set of peaks mirrored at the horizontal axis show up in the long wavelength range, which are assigned to main chain chirality of the polyphenylenes.     

Study on catalytic properties of the macromolecules containing pendant pyridine groups-supported rhodium complexes for the carbonylation reactions

The experiments reveal that anchoring rhodium(I) macromolecules containing pendant pyridine groups exhibit remarkably different carbonylation catalytic behaviours, depending on the quaternary degree of polymer ligands. The catalysts with the quaternized ligands are more active than that with the non-quaternized ligands, but the best of the lots isn't the highestly quaternized. A new structural type of the compounds called the polydentate hetero-bound rhodium(I) ion complexes is recognized to be responsible for higher carbonylation reactivities.     

Poly(styrene)-supported co-salen complexes as efficient recyclable catalysts for the hydrolytic kinetic resolution of epichlorohydrin

Here we describe an unprecedented synthetic approach to poly(styrene)-supported chiral salen ligands by the free radical polymerization of an unsymmetrical styryl-substituted salen monomer (H2salen = bis(salicylidene)ethylenediamine). The new method allows for the attachment of salen moieties to the polymer main chain in a flexible, pendant fashion, avoiding grafting reactions that often introduce ill-defined species on the polymers. Moreover, the loading of the salen is controlled by the copolymerization of the styryl-substituted salen monomer with styrene in different ratios. The polymeric salen ligands are metallated with cobalt(II) acetate to afford the corresponding supported Co-salen complexes, which are used in the hydrolytic kinetic resolution of racemic epichlorohydrin, exhibiting high reactivity and enantioselectivity. Remarkably, the copolymer-supported Co-salen complexes showed a better catalytic performance (>99 % ee, 54 % conversion, one hour) in comparison to the homopolymeric analogues and the small molecule Co-salen complex. The soluble poly(styrene)-supported catalysts were recovered by precipitation after the catalytic reactions and were recycled three times to afford almost identical enantiomeric excesses as the first run, with slightly reduced reaction rates.     

Synthesis of aromatic polyesters having pendant carboxyl groups in the side chains and conversion of the carboxyl groups to other reactive groups

Aromatic polyester, copolyester, and poly(ester-amide-thioester) having pendant carboxyl groups are directly synthesized by the organic phase/water phase interfacial polyconden-sation using low-molecular and polymeric phase transfer catalysts. Spectral analysis of the resulting polymers indicates that the nucleophilicity of salts of phenols to diacid chloride is far higher than that of salts of carboxylic acids and chemoselective esterification occurs in a 100% yield. Even if the polymeric catalyst having amino acid moiety as a nucleophilic group is used in the polycondensation, the polymers do not contain anhydride groups. The polyester can be almost quantitatively converted to polymers with different reactive groups by reacting the pendant carboxyl groups with alkyl halides in a DMA_c-H₂O mixture con-taining K₂CO₃. A bifunctional catalytic mechanism is proposed for the chemical modification of the polyesters. © 1995 John Wiley & Sons, Inc.     

Synthesis of chiral polymers containing thioetherified cinchonidinium repeating units and their application to asymmetric catalysis

A thiol-ene reaction of dithiol and two equivalents of cinchonidine afforded a thioetherified cinchonidine dimer. The dimer was treated with benzyl bromide to give a quaternary ammonium dimer. An ion exchange reaction of the cinchonidinium dimer and disodium disulfonate gave polymers containing chiral quaternary ammonium repeating units in their main-chain structures. Another type of chiral polymer was synthesized by quaternization polymerization. Repeated quaternization reactions between the thioetherified cinchonidine dimer and dihalides yielded chiral polymers containing cinchonidinium structures in their main chains. Both of these chiral polymers were successfully used as catalysts for the asymmetric alkylation of N-diphenylmethylene glycine tert-butyl ester. The chiral cinchonidinium polymers explored in this study showed excellent catalytic activity in asymmetric alkylation reactions and were reused several times without loss of activity.