共查询到20条相似文献,搜索用时 10 毫秒
1.
Neil B. Cramer Christopher N. Bowman 《Journal of polymer science. Part A, Polymer chemistry》2001,39(19):3311-3319
We used real‐time Fourier transform infrared to monitor the conversion of both thiol and ene (vinyl) functional groups independently during photoinduced thiol–ene photopolymerizations. From these results, the stoichiometry of various thiol–ene and thiol–acrylate polymerizations was determined. For thiol–ene polymerizations, the conversion of ene functional groups was up to 15% greater than the conversion of thiol functional groups. For stoichiometric thiol–acrylate polymerizations, the conversion of the acrylate functional groups was roughly twice that of the thiol functional groups. With kinetic expressions for thiol–acrylate polymerizations, the acrylate propagation kinetic constant was found to be 1.5 times greater than the rate constant for hydrogen abstraction from the thiol. Conversions of thiol–acrylate systems of various initial stoichiometries were successfully predicted with this ratio of propagation and chain‐transfer kinetic constants. Thiol–acrylate systems with different initial stoichiometries exhibited diverse network properties. Thiol–ene systems were initiated with benzophenone and 2,2‐dimethoxy‐2‐phenylacetophenone as initiators and were also polymerized without a photoinitiator. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3311–3319, 2001 相似文献
2.
Archie Wall Alfie G. Wills Nafsika Forte Calise Bahou Lisa Bonin Karl Nicholls Michelle T. Ma Vijay Chudasama James R. Baker 《Chemical science》2020,11(42):11455
Maleimide chemistry is widely used in the site-selective modification of proteins. However, hydrolysis of the resultant thiosuccinimides is required to provide robust stability to the bioconjugates. Herein, we present an alternative approach that affords simultaneous stabilisation and dual functionalisation in a one pot fashion. By consecutive conjugation of a thiol and an amine to dibromomaleimides, we show that aminothiomaleimides can be generated extremely efficiently. Furthermore, the amine serves to deactivate the electrophilicity of the maleimide, precluding further reactivity and hence generating stable conjugates. We have applied this conjugation strategy to peptides and proteins to generate stabilised trifunctional conjugates. We propose that this stabilisation-dual modification strategy could have widespread use in the generation of diverse conjugates.An alternative approach to maleimide conjugate stabilisation is presented, by the consecutive addition of a thiol and an amine to dibromomaleimides. The amine serves to simultaneously deactivate the maleimide and enable dual functionalisation. 相似文献
3.
Regioselective reductive openings of mixed phenolic-benzylic acetals, using BH3.NMe3-AlCl3, was investigated, and a mechanism where the outcome is directed by the electrostatic potential of the two oxygen atoms is presented. The regioselective acetal opening was used in the synthesis of a fluorescently labeled analogue to antiproliferative xylosides. The fluorescently labeled xyloside was tested for uptake, antiproliferative activity, and glycosaminoglycan priming in different cell lines. The xyloside was taken up by all cell lines but did not initiate glycosaminoglycan biosynthesis. 相似文献
4.
Ricardo Acosta Ortiz Bertha A. Puente Urbina Liliana V. Cabello Valdez Lydia Berlanga Duarte Ramiro Guerrero Santos Aída E. García Valdez Mark D. Soucek 《Journal of polymer science. Part A, Polymer chemistry》2007,45(21):4829-4843
Hybrid materials derived from a thiol‐ene and cationic polymerization were obtained from concomitant polymerization. The hybrid materials were cured by both photopolymerization and thermally induced polymerization. The kinetics of the photopolymerization were measured using time resolved‐IR and optical pyrometry. The nucleophilic character of the polysulfide obtained initially in the thiol‐ene polymerization inhibited the development of the cationic photoinitiated polymerization of epoxy monomers. Besides, the epoxide groups underwent a proton catalyzed addition reaction with the thiols to form new sulfides groups in the reaction mixture. It is proposed that the formed sulfides can terminate the growing polyether chains forming dormant species like trialkylsulfonium salts. These salts promote the thermal polymerization of the epoxy monomer in a post treatment, producing hard and transparent materials. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4829–4843, 2007 相似文献
5.
6.
7.
Naveed Ahmad Khan Fahad Sameer Alshammari Carlos Andrs Tavera Romero Muhammad Sulaiman Ghaylen Laouini 《Molecules (Basel, Switzerland)》2021,26(23)
In this study, we have investigated the mathematical model of an immobilized enzyme system that follows the Michaelis–Menten (MM) kinetics for a micro-disk biosensor. The film reaction model under steady state conditions is transformed into a couple differential equations which are based on dimensionless concentration of hydrogen peroxide with enzyme reaction and substrate within the biosensor. The model is based on a reaction–diffusion equation which contains highly non-linear terms related to MM kinetics of the enzymatic reaction. Further, to calculate the effect of variations in parameters on the dimensionless concentration of substrate and hydrogen peroxide, we have strengthened the computational ability of neural network (NN) architecture by using a backpropagated Levenberg–Marquardt training (LMT) algorithm. NNs–LMT algorithm is a supervised machine learning for which the initial data set is generated by using MATLAB built in function known as “pdex4”. Furthermore, the data set is validated by the processing of the NNs–LMT algorithm to find the approximate solutions for different scenarios and cases of mathematical model of micro-disk biosensors. Absolute errors, curve fitting, error histograms, regression and complexity analysis further validate the accuracy and robustness of the technique. 相似文献
8.
Bing Yu Justin W. Chan Charles E. Hoyle Andrew B. Lowe 《Journal of polymer science. Part A, Polymer chemistry》2009,47(14):3544-3557
Sequential thiol‐ene/thiol‐ene and thiol‐ene/thiol‐yne reactions have been used as a facile and quantitative method for modifying end‐groups on an N‐isopropylacrylamide (NIPAm) homopolymer. A well‐defined precursor of polyNIPAm (PNIPAm) was prepared via reversible addition‐fragmentation chain transfer (RAFT) polymerization in DMF at 70 °C using the 1‐cyano‐1‐methylethyl dithiobenzoate/2,2′‐azobis(2‐methylpropionitrile) chain transfer agent/initiator combination yielding a homopolymer with an absolute molecular weight of 5880 and polydispersity index of 1.18. The dithiobenzoate end‐groups were modified in a one‐pot process via primary amine cleavage followed by phosphine‐mediated nucleophilic thiol‐ene click reactions with either allyl methacrylate or propargyl acrylate yielding ene and yne terminal PNIPAm homopolymers quantitatively. The ene and yne groups were then modified, quantitatively as determined by 1H NMR spectroscopy, via radical thiol‐ene and radical thiol‐yne reactions with three representative commercially available thiols yielding the mono and bis end functional NIPAm homopolymers. This is the first time such sequential thiol‐ene/thiol‐ene and thiol‐ene/thiol‐yne reactions have been used in polymer synthesis/end‐group modification. The lower critical solution temperatures (LCST) were then determined for all PNIPAm homopolymers using a combination of optical measurements and dynamic light scattering. It is shown that the LCST varies depending on the chemical nature of the end‐groups with measured values lying in the range 26–35 °C. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3544–3557, 2009 相似文献
9.
Herein, we report on our studies on the reaction of organoselenium compounds with triazoles under thermal conditions using simple Rh(ii) catalysts. These reactions do not provide the product of classic rearrangement reactions. Instead two different cascade reactions were uncovered. While allyl selenides react in a cascade of sigmatropic rearrangement and selenium-mediated radical cyclization reaction to give dihydropyrroles, cinnamyl selenides undergo a double rearrangement reaction cascade involving a final aza-Cope reaction to give the product of 1,3-difunctionalization. Theoretical and experimental studies were conducted to provide an understanding of the reaction mechanism of these cascade reactions. The former provide an important insight into fundamental question on the nature of the ylide intermediate in rearrangement reactions and reveal that organoselenium compounds take up multiple roles in rearrangement reactions and mediate a free ylide reaction mechanism.Herein, we report on our studies on the reaction of organoselenium compounds with triazoles under thermal conditions using simple Rh(ii) catalysts. 相似文献
10.
11.
Pd-catalyzed Suzuki–Miyaura cross-coupling is one of the most straightforward and versatile methods for the construction of functionalized arenes and heteroarenes but site-selective cross-coupling of polyhalogenated (hetero)arenes containing identical halogen substituents remains a challenging problem. Herein, we report a new candidate for heterocyclic Suzuki–Miyaura coupling reaction. This candidate has been applied in organometallic systems by combining classical aryl boronic acid reagents with non-classical heteroarenes. Experimental and computational studies of the mechanism of the reactions were performed, with an emphasis on the identity of the reactive species in the oxidative addition step and the nature of the precise site selectivity. The influence of both the aromaticity of the metalla-aromatic substrates and the steric and electronic properties of the halogenated sites are studied in detail.We describe unique polyhalogenated heteroarene candidates for site-selective cross-coupling, which shows high catalytic performances in the functionalization of polycyclic metalla-aromatics with excellent photophysical properties. 相似文献
12.
Zhang Q Carpenter CJ Kemper PR Bowers MT 《Journal of the American Chemical Society》2003,125(11):3341-3352
The sequential association energies for one through six water molecules clustering to Na(2)I(+), as well as one and two water molecules clustering to Na(3)I(2)(+), are measured. The association energies show a pairwise behavior, indicating a symmetric association of water molecules to the linear Na(2)I(+) and Na(3)I(2)(+) ions. This pairwise behavior is well reproduced by Density Functional Theory (DFT) calculations. DFT calculations also suggest that a significant separation of charge for the Na-I ion pair occurs when four or more water molecules cluster to a single sodium center. Two different solvent-separated ion pairs have been identified with the DFT calculations. Experiments also show that the dissolution processes, loss of a neutral NaI unit, occurs when six or more water molecules have been added to Na(2)I(+) cluster. However, one or two water molecules are able to detach an NaI unit from the Na(3)I(2)(+) cluster. The difference in solubility of the Na(2)I(+) and Na(3)I(2)(+) ions is due to the difference in the energies required to lose an NaI unit from these two species. The experiment also confirms that the loss of a neutral NaI unit, instead of an Na(+) ion, occurs during the dissolution processes of Na(3)I(2)(+). The microsolvation schemes proposed to explain our experimental observations are supported by DFT and phase space theory (PST) calculations. 相似文献
13.
Xiaoyin Xiao Peter Berenz Helmut Baltruschat Shigang Sun 《Journal of Electroanalytical Chemistry》2001,500(1-2)
Well-grown 3-D copper clusters were obtained on a Pt(111) surface at intermediate overpotentials from a sulfuric acid solution. The hexagonal and triangular clusters grew layer-by-layer and were aligned to the orientation of the substrate, indicating epitaxial growth without rotation. By using the tip as an anodic electrode, the atomic structure of each layer of the cluster was monitored locally during dissolution. The results show that in the copper clusters the lattice constant relaxes directly to the bulk lattice constant in the second layer (at least after deposition of the third layer). Additional discussion on the dissolution kinetics is also included. The same method has been used to elucidate the structure of the Cu overlayer on Pt(100). 相似文献
14.
In the Heck reaction between aryl halides and n-butyl acrylate, the palladacycle {Pd[kappa(1)-C, kappa(1)-N-C=(C(6)H(5))C(Cl)CH(2)NMe(2)](mu-Cl)}(2), 1, is merely a reservoir of the catalytically active Pd(0) species [1](Pd colloids or highly active forms of low ligated Pd(0) species) that undergoes oxidative addition of the aryl halide on the surface with subsequent detachment, generating homogeneous Pd(II) species. The main catalytic cycle is initiated by oxidative addition of iodobenzene to [1], followed by the reversible coordination of the olefin to the oxidative addition product. All the unimolecular subsequent steps are indistinguishable kinetically and can be combined in a single step. This kinetic model predicts that a slight excess of alkene relative to iodobenzene leads to a rapid rise in the Pd(0) concentration while when using a slight excess of iodobenzene, relative to alkene, the oxidative addition product is the resting state of the catalytic cycle. Competitive experiments of various bromoarenes and iodoarenes with n-butyl acrylate catalyzed by 1 and CS, CP, and NCN palladacycles gave the same rho value (2.4-2.5 for Ar-Br and 1.7-1.8 for Ar-I) for all palladacycles employed, indicating that they generate the same species in the oxidative addition step. The excellent fit of the slope with the sigma(0) Hammett parameter and the entropy of activation of -43 +/- 8 J mol(-1) K(-1) are consistent with an associative process involving the development of only a partial charge in the transition state for the oxidative step of iodobenzene. 相似文献
15.
Schmitt M Schulze-Pillot R Hempelmann R 《Physical chemistry chemical physics : PCCP》2011,13(2):690-695
The kinetics of bulk photo-polymerisation of multifunctional monomers, leading to highly cross-linked polymers, has been investigated by in situ real-time Raman spectroscopy. The decrease with time of the monomer content is described by a modified Gompertzian function originally developed for population dynamics. This function is flexible enough to take into account inhibitor effect, gel effect and glass effect which are characteristic for curing of technical polymer coatings. Layers of commercial acrylic resins with a thickness of 50 μm, with commercial initiators, are taken as model systems for the UV-curing. The proof-of-concept is presented that the combination of Raman hardware and Gompertzian software enables systematic laboratory tests of curable systems. 相似文献
16.
V. V. Skopenko V. N. Kokozei O. Yu. Vasil'eva 《Theoretical and Experimental Chemistry》1995,31(5):230-243
Current approaches to study of the kinetics of the dissolution of metallic powders and metal oxides are discussed. The applicability of the various kinetic equations to the rate of a topochemical reaction is discussed. It is determined by features of the appearance and growth of the nuclei of the solid product, by the change in the size of the interface of the solid phases, and by the effect of the reaction product. For the case of the kinetics of reaction of copper, nickel, cobalt, zinc, cadmium, and lead powders and their oxides with aqueous and nonaqueous solutions of ammonium salts it was shown that the conditions of formation, the properties, and the behavior of the product layer formed on the surface of the reacting particle can have a determining effect on the kinetics and mechanism of the reaction. The results from the kinetic experiment are examined in terms of a model described by the generalized topochemical equation =1 – exp(–ktn) and also a model based on an analysis of the reaction rate constants at various sections of the kinetic curve. Correlations were established between the coefficient n in the generalized topochemical equation and also the rate constant and density or solubility of the reaction product formed on the surface of the reacting particle.Translated from Teoreticheskaya i Éksperimental'naya Khimiya, Vol. 31, No. 5, pp. 284–297, September–October, 1995. 相似文献
17.
Zeynep Beyazkilic Muhammet U. Kahveci Binnur Aydogan Baris Kiskan Yusuf Yagci 《Journal of polymer science. Part A, Polymer chemistry》2012,50(19):4029-4036
A new class of polybenzoxazine precursors of combined molecular structure of benzoxazine in the open and ring form has been developed. Thermally curable benzoxazine networks were obtained by simultaneous photoinduced thiol‐ene and Catalytic Opening of the Lateral Benzoxazine Rings by Thiols (COLBERT). The thiol‐ene reactions were initiated by photolysis of a free radical photoinitiator, 2, 2‐dimethoxy‐2‐phenyl acetophenone (DMPA), and the competing COLBERT reaction was triggered by thiol compound, 1,2‐ethanedithiol, present in the reaction mixture. The extent of reactions was evaluated by conducting experiments both under UV irradiation and in dark using model benzoxazines. The precursor soft films (pre‐P(B‐ala‐DTE)) were prepared by irradiating solutions of diallyl functional benzoxazine (B‐ala), 1,2‐ethanedithiol and DMPA. The obtained pre‐P(B‐ala‐DTE) films were then cured through thermally activated ring opening reaction of remaining benzoxazine groups yielding a more rigid and tough film. Thermal and mechanical properties of the films were investigated by DSC, DMA and TGA and compared with a typical polybenzoxazine, P(B‐ala). © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012 相似文献
18.
A continuous flow-through reactor with a thin layer of solid particles (size ranging from 100 to 300 μm) was used to obtain a deeper knowledge on the mechanism of dissolution of UO2 under oxidizing conditions. Using this methodology the dissolution rate of uranium dioxide was determined at three different oxygen partial pressures (5, 21, and 100% in nitrogen) and as a function of pH (between 3 and 12) in a noncomplexing medium. From the results of these experiments the following rate equation was derived: In addition, XPS characterizations were performed to determine the U(IV)/U(VI) ratio on the solid surface at different experimental times and conditions. These results showed that at acidic conditions (pH below 6.7) the final solid surface presents a stoichiometry close to UO2, while at alkaline conditions the final solid surface average composition is close to UO2.25. This information was integrated with the results of the leaching experiments to present a model for the mechanism of dissolution of uranium dioxide under the experimental conditions. © 1997 John Wiley & Sons, Inc. Int J Chem Kinet 29: 261–267, 1997. 相似文献
19.
Thermogravimetric experiments on very small, single-crystalline, acicular particles of CrO2, of homogeneous size and shape, indicate that the reduction of CrO2 by hydrogen to produce CrOOH, can be explained by means of a unidimensional diffusion mechanism. Hydrogen diffuses along the empty tunnels that exist parallel to the c axis in the rutile-like unit cell. The corresponding diffusion equation is D = 10?6(?19.3 ± 2.3)/RT cm2/sec, and is valid for 490 < T < 519 K and 30 < PH2 < 110 Torr. 相似文献