The preparation of poly(N-acetyl-α-amino acrylic acid) [poly(N-acetyl dehydroalanine)] and poly(α-amino acrylic acid) (polydehydroalanine)

Poly(N-acetyl-α-amino acrylic acid) was prepared by a free radical polymerization reaction. Mild alkaline hydrolysis of the polymer product yielded a second polymer poly(α-amino acrylic acid) (polydehydroalanine). Both polymers exhibited certain polyelectrolyte behavior, although the latter did not behave as expected for an amphoteric polyelectrolyte.     

DFT oligomer approach to vibrational spectra of poly(p-phenylenevinylene)

Experimental Raman and infrared spectra of poly(p-phenylenevinylene) have been analyzed on the basis of the normal coordinate calculations based on the density functional theory method at the B3LYP/cc-pVDZ level for a model oligomer. Vibrational modes corresponding to optically active modes of an infinite polymer chain have been selected from the calculated results. On the basis of these normal vibrations, the observed vibrational spectra of poly(p-phenylenevinylene) have been explained successfully. The angles between the calculated transition dipole moment vectors and the polymer axis for some infrared bands agree with those derived from observed infrared dichroic spectrum.     

Coupling reaction of poly(α-methylstyryl) anion with (MMA–α-methylstyrene) block copolymer

(MMA–α-methylstyrene)block copolymer was reacted with poly(α-methylstyryl)anion at ?78°C in a mixture of good tetrahydrofuran (THF) and poor methylcyclohexane solvents. The reaction conditions were chosen so as to produce graft copolymers made up of a backbone (AB-type block copolymer) and a single branched chain (1:2 graft copolymer). Gel permeation chromatograph (GPC), osmotic pressure measurement, and elemental analysis were used for the characterization of 1:2 graft copolymer. It appeared that poly(α-methylstyryl)anion reacted with the end pendant groups located farthest away from the branched point of AB-type block copolymer, when the dimensions of AB-type block copolymer molecule are small.     

Thermal degradation of poly(4-chloromethyl-α-acetoxystyrene) and poly(4-chloropropyl-α-acetoxystyrene)

The thermal degradation behaviour of two poly(4-ω-chloroalkyl-α-acetoxystyrene)s has been studied by means of dynamic and isothermal thermogravimetric analysis and gas chromatography-mass spectroscopy. The results show that two reactions occur during the first stage of the process. An elimination reaction gives acetic acid as major volatile species and a residue formed of para-substituted polyphenylacetylenes. A depolymerization reaction gives principally the para-substituted acetophenone corresponding to the starting monomer, and explains the low molecular weights of the residues. These two reactions are simultaneous in the case of poly(4-chloromethyl-α-acetoxystyrene), but are distinguishable in the case of poly(4-3-chloropropyl-α-acetoxystyrene). Kinetic parameters of the overall decomposition of these two polymers have been calculated and compared with those of poly(4-2-chloroethyl-α-acetoxystyrene).     

Synthesis of poly(γ-methoxypropylmethylsilylene) and poly(γ-methoxypropylmethylsilylene-co-di-n-hexylsilylene)

The synthesis of γ;-methoxypropylmethyldichlorosilane, and its subsequent polymerization and copolymerization with di;-n;-hexyldichlorosilane through the reductive coupling with sodium has been accomplished. The resulting polymers contain methyl ether side groups that allow further synthetic transformations on the polysilane backbone. For poly (γ;-methoxypropylmethylsilylene) these groups impart solubility characteristics different than typical alkyl and aryl substituted polysilanes. These new polymers and copolymers have been characterized by GPC and ¹H-, ¹³C-, and ²⁹Si-NMR. © 1994 John Wiley & Sons, Inc.     

Nuclear magnetic relaxation of α-13C nuclei of helical poly(γ-hexyl-L-glutamate) and poly(γ-benzyl-L-glutamate)

Spin-lattice relaxation times (T₁), spin-spin relaxation times (T₂), and nuclear Overhauser enhancements (NOE), at 75.5 MHz are reported for α-¹³C nuclei of poly (γ-benzyl-L -glutamate) in deuterated dimethylformamide at 60°C and of poly(γ-hexyl-L -glutamate) in cyclohexanone at 48 and 79°C. It is shown that for molecular weights above 10⁵, the polypeptides cannot be considered as essentially rigid helices with internal librational motions; additional backbone flexing motions contribute to the relaxation behavior.     

Kinetics of gas-phase thermal elimination of (α-phenylethyl) and (β-phenylethyl)-pyrazole

Flash Vaccum Pyrolysis of (α-phenylethyl) and (β-phenylethyl)-pyrazole were studied. Pyrazole and Styrene were found as only products of both reactions. The kinetic parameters obtained reinforce the results previously found about the poor influence of the substitutents on the α and β carbons of the ethyl group in the FVP of N-alkyl pyrazoles and (β-haloethyl) pyrazoles.     

Metal-catalyzed oxidation of poly(α-methylstyrene) during surface-enhanced Raman scattering

Surface-enhanced Raman scattering (SERS) was used to characterize thin films of poly(α-methylstyrene) (PMS) spin-coated onto silver island films supported by glass substrates. At laser powers of a few tens of milliwatts, SERS spectra of thin films of PMS (about 100 Å) were weak, and only the bands near 1010 and 1040 cm^?1 were observed. At laser powers of about 100 mW, additional bands characteristic of PMS were observed near 720 and 1610 cm^?1. However, oxidative degradation of the PMS films to form graphite-like substances was also observed at the higher laser powers. When the thickness of the PMS films was increased to several hundred angstroms, degradation of the films was inhibited, but the intensity of the Raman scattering remained constant, indicating that the observed SERS was an interfacial rather than bulk effect. Degradation during SERS experiments was also inhibited by overcoating PMS films with much thicker films of poly(4-styrene sulfonate) (PSS). Scattering from the PSS overlayers was not observed as long as the thickness of the PMS films was greater than several tens of angstroms, again showing that the SERS was an interfacial effect. Oxidative degradation of the PMS films was also inhibited by adding a few percent of the antioxidant 2,6-di-tert-butyl-4-methylphenol to the polymer. Bands related to sulfite contaminants adsorbed onto the silver island films were observed near 640 and 940 cm^?1. These bands disappeared when PSS, but not PMS, was spin-coated onto the SERS substrates, indicating a strong interaction between PSS and silver.     

Stereoregularity of poly(methyl α-chloroacrylate)

Triad and tetrad tacticities of poly(methyl α-chloroacrylate) and poly(methyl α-chloroacrylate-β-d₁) were determined by nuclear magnetic resonance (NMR) spectroscopy. Methyl α-chloroacrylate-β-d₁ and its polymer were first synthesized. Isotactic poly(methyl α-chloroacrylate) was prepared with ethylmagnesium chloride-benzal-acetophenone in combination as catalyst. The syndiotacticity of radically polymerized polymers increased with decreasing polymerization temperature. For radical polymerization, enthalpy and entropy differences between isotactic and syndiotactic additions were calculated to give ΔH ? ΔH = 850 cal/mole and ΔS ? ΔS = 0.93 eu. The stereoregularity of the polymer prepared with phenylmagnesium bromide catalyst was analyzed in fairly good agreement with first-order Markov statistics, while polymerization with fluorenyllithium seems predominantly to proceed by a mechanism similar to free-radical mechanism. Stereoregularity-controlling power for individual substituents is briefly discussed.     

Study of segmental orientation in poly (vinyl chloride)/poly (α-methyl-α-n-propyl-β-propiolactone) blends by fourier-transform infrared spectroscopy

Fourier-transform infrared (FTIR) spectroscopy has been used to investigate the segmental orientation of poly(vinyl chloride) (PVC)/poly (α-methyl-α-n-propyl-β-propiolactone) (PMPPL) blends in uniaxially stretched samples over a wide range of compositions and draw ratios. The results indicate that for pure PVC, syndiotactic segments reach a higher degree of orientation than isotactic segments and gauche conformations. Similarly, for pure PMPPL, crystalline segments orient more than amorphous segments at any given elongation. Thus, for both polymers, the higher orientation is obtained for the more rigid segments or those located in a more rigid (crystalline) phase. The addition of the macromolecular plasticizer PMPPL has no effect on the orientation of PVC syndiotactic segments, but it lowers the orientation of PVC gauche conformations, suggesting that the polyester is located in the amorphous regions of PVC. Finally, the PMPPL orientation function initially decreases with the addition of PVC and thereafter remains constant. The results are discussed in terms of interpenetrating networks and relaxation processes.     

Crystallization of poly(α-methyl-α-N-propyl-β-propiolactones) prepared from homogeneous and heterogeneous initiators

Half-crystallization times t_½, enthalpies of fusion ΔH, melting temperatures T_f glass transition temperatures T_g x-ray patterns, and morphologies were obtained for nine samples of poly(α-methyl-α-n-propyl-β-propiolactones) prepared from different homogeneous or heterogeneous initiators. The bulk of the results indicates that all samples can be classified into two categories: Polymers A having t_½?, 100 min, ΔH ? 26 J/g, T ? 376 K, T_g ? 275 K, and Polymers B having t_½ ? 10 min, ΔH ? 14.5 J/g T ? 425 K and T_g ? 271 K. Polymers A were prepared with homogeneous initiators while polymers B were polymerized with heterogeneous intiators. The difference in crystallization behavior between polymers A and polymers B is certainly due to a difference in microstructure, brought about by the initiators, which has been qualitatively observed by NMR.     

Heat capacity and vibrational dynamics of α poly(β-benzyl-L-aspartate)

Poly(β-benzyl-L-aspartate) (PBLA) is an unusual polypeptide, which is capable of going into four different conformations, namely, left-handed α helix, right-handed α helix, ω helix, and β pleated sheet. The present work is a complete study of normal modes and their dispersion in the unusual left-handed α form. A special feature of some of the dispersion curves is their tendency to bunch in the neighborhood of helix angle. This is attributed to the presence of strong intramolecular interactions. Crossing and repulsion between the dispersion curves is also observed. The N-deuterated analogue of PBLA has been studied to check the validity of assignments and force field (Urey Bradley). Specific heat has been obtained from dispersion curves via density of states. A comparative study of left-handed and right-handed forms is presented. © 1996 John Wiley & Sons, Inc.     

Mass spectra of some (Z)-α-Phenyl-β-(2-thienyl)acrylonitriles

The mass spectra of some (Z)α-(4-R′-phenyl)-β-(2-thienyl-5-R)acrylonitriles (R = H, CH₃, Br; R′ = H, CH₃O, CH₃, Cl, NO₂) at 70 eV are reported. Mass spectra exhibit pronounced molecular ions. The compound's where R = H, and CH₃ are characterized by the occurrence of a strong [M - H]⁺ peak. Moreover, in all the compounds a m/z 177 peak occurs. In the compounds where R = H, [M - HS]* and [M - CHS]* ions are present except the nitroderivatives. Where R = CH₃, [M - HS]⁺ ion occurs.     

Preparation,characterization, and porperties of optically active poly(α-methyl-α-ethyl-β-propiolactones)

S(?) and R(+) enantiomers of α-methyl-α-ethyl-β-propiolactone (MEEPL) were prepared in an eight-step synthesis with respective optical purities of 99 and 97% determined by ¹H-NMR (250 MHz) spectroscopy. Polymers (PMEPL) of different enatiomeric compositions were prepared with an anionic-type initiator. Substantial differences in physical properties were observed between the racemic and optically pure polymers; for example, the melting point of the latter is 42°C higher than that of the former. Chiroptical properties of PMEPLs are reported. The ¹³C-NMR (100.62 MHz) spectra of the polymers indicated that the distribution of configurational units in the macromolecular chain is random.