A top-down approach to protein structure studies using chemical cross-linking and Fourier transform mass spectrometry

In a preliminary communication we described a top-down approach to the determination of chemical cross-link location in proteins using Fourier transform mass spectrometry (FT-MS). We have since extended the approach to use a series of homobifunctional cross-linkers with the same reactive functional groups, but different cross-linker arm lengths. Correlating cross-linking data across a series of related linkers allows the distance constraint derived from a cross-link between two reactive side chains to be determined more accurately and increases the confidence in the assignment of the cross-links. In ubiquitin, there are seven lysines with primary amino groups and the amino terminus. Disuccinimidyl suberate (DSS, cross-linker arm length = 11.4 A), disuccinimidyl glutarate (DSG, cross-linker arm length = 7.5 A) and disuccinimidyl tartrate (DST, cross- linker arm length = 5.8 A) are homobifunctional cross-linking reagents that react specifically with primary amines. Using tandem mass spectrometry (MS/MS) on the singly, internally cross-linked precursor ion of ubiquitin, we found cross-links with DSS and DSG between the amino terminus and Lys 6, between Lys 6 and Lys 11, and between Lys 63 and Lys 48. Using disuccinimidyl tartrate (DST), the shortest cross-linker in the series, only the cross-links between the amino terminus and Lys 6, and between Lys 6 and Lys 11 were observed. The observed cross-links are consistent with the crystal structure of ubiquitin, if the lysine side chains and the amino terminus are assumed to have considerable flexibility. In a separate study, we probed the reactivity of the primary amino groups in ubiquitin using the amino acetylating reagent, N-hydroxy succinimidyl acetate (NHSAc), and a top-down approach to localize the acetylated lysine residues. The reactivity order obtained in that study (M1 approximate, equals K6 approximate, equals K48 approximate, equals K63) > K33 > K11 > (K27, K29), shows that the cross-link first formed in ubiquitin by reaction with DSS and DSG occurs between the most reactive residues.     

Mapping low-resolution three-dimensional protein structures using chemical cross-linking and Fourier transform ion-cyclotron resonance mass spectrometry

Techniques in mass spectrometry (MS) combined with chemical cross-linking have proven to be efficient tools for the rapid determination of low-resolution three-dimensional (3-D) structures of proteins. The general procedure involves chemical cross-linking of a protein followed by enzymatic digestion and MS analysis of the resulting peptide mixture. These experiments are generally fast and do not require large quantities of protein. However, the large number of peptide species created from the digestion of cross-linked proteins makes it difficult to identify relevant intermolecular cross-linked peptides from MS data. We present a method for mapping low-resolution 3-D protein structures by combining chemical cross-linking with high-resolution FTICR (Fourier transform ion-cyclotron resonance) mass spectrometry using cytochrome c and hen egg lysozyme as model proteins. We applied several homo-bifunctional, amine-reactive cross-linking reagents that bridge distances from 6 to 16 A. The non-digested cross-linking reaction mixtures were monitored by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) to determine the extent of cross-linking. Enzymatically digested reaction mixtures were separated by nano-high-performance liquid chromatography (nano-HPLC) on reverse-phase columns applying water/acetonitrile gradients with flow rates of 200 nL/min. The nano-HPLC system was directly coupled to an FTICR mass spectrometer equipped with a nano-ESI (electrospray ionization) source. Cross-linking products were identified using a combination of the GPMAW software and ExPASy Proteomics tools. For correct assignment of the cross-linking products the key factor is to rely on a mass spectrometric method providing both high resolution and high mass accuracy, such as FTICRMS. By combining chemical cross-linking with FTICRMS we were able to rapidly define several intramolecular constraints for cytochrome c and lysozyme.     

Detailed structural elucidation of polyesters and acrylates using Fourier transform mass spectrometry

The detailed structural characterization of complex polymer architectures, like copolymers and polymer mixtures, by mass spectrometry presents a challenge. Even though soft ionization analyses revolutionized the characterization of large molecules and provided a means for determining the polymer’s molecular weight distribution, polydispersity, and end groups, full microstructure elucidation and monomer sequencing by soft ionization alone is not possible. The combination of high-resolution Fourier transform mass spectrometry (FTMS) and tandem mass spectrometry (MSⁿ) provides a powerful analytical tool for addressing these challenges. This tool was used in our work to separate and identify the products of polymerization between 12-hydroxystearic acid (HSA) and stearic acid (SA), to provide precise information about the exact location of caprolactones on the Tris(2-hydroxyethyl)isocyanurate (THEIC) molecule, and to sequence a glycidyl methacrylate/methyl methacrylate (GMA/MMA) copolymer. The results highlight the value of ultrahigh resolution and tandem mass spectrometry for fine structural characterization and sequencing of polymers.     

Epitope mapping on bovine prion protein using chemical cross-linking and mass spectrometry

An analytical strategy for the analysis of antigen epitopes by chemical cross-linking and mass spectrometry is demonstrated. The information of antigen peptides involved in the binding to an antibody can be obtained by monitoring the antigen peptides modified by a partially hydrolyzed cross-linker in the absence and in the presence of an antibody. This approach was shown to be efficient for characterization of the epitope on bovine prion protein bPrP(25-241) specifically recognized by a monoclonal antibody, 3E7 (mAb3E7), with only a small amount of sample (200 picomoles) needed. After cross-linking of the specific immuno complex, a matrix-assisted laser desorption/ionization (MALDI) mass spectrometer equipped with an ion conversion dynode (ICD) high-mass detector was used to optimize the amount of cross-linked complex formed at 202 kDa before proteolytic digestion. To identify the cross-linked peptides after proteolysis without ambiguity, isotope-labeled cross-linkers, disuccinimidyl suberate (DSS-d0/d12) and disuccinimidyl glutarate (DSG-d0/d6), together with high-resolution Fourier transform ion-cyclotron resonance mass spectrometry (FTICR-MS) were used. As a result, a complete fading of the peak intensities corresponding to the peptides representing the epitope was observed when bPrP/mAb3E7 complexes were formed.     

Mapping protein interfaces by chemical cross-linking and Fourier transform ion cyclotron resonance mass spectrometry: application to a calmodulin / adenylyl cyclase 8 peptide complex

Chemical cross-linking--an established technique in protein chemistry--has re-emerged, in combination with mass spectrometric analysis of the reaction products, as a valuable tool to identify interacting amino acid sequences in protein complexes. In the present study, we are mapping the interface of the calcium-dependent complex between calmodulin (CaM) and a peptide derived from the C-terminal region of adenylyl cyclase 8 (AC 8). Cross-linking reactions are performed using the two amine-reactive, isotope-labeled (d0 and d4) cross-linkers BS(3) (bis[sulfosuccinimidyl]suberate) and BS(2)G (bi[sulfosuccinimidyl] glutarate) as well as the 'zero-length' cross-linker (EDC, ethyl-3-[3-dimethylaminopropyl] carbodiimide hydrochloride). After separation of the cross-linking reaction mixtures by one-dimensional gel electrophoresis (sodium dodecyl sulphate polyacrylamide gel) and in-gel digestion of the cross-linked complexes, the resulting peptide mixtures are analyzed by nano-high-performance liquid chromatography/ nano-electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry. The identified intermolecular cross-linking products will give further insight into calmodulin/adenylyl cyclase 8 interaction.     

Monitoring conformational changes in protein complexes using chemical cross-linking and Fourier transform ion cyclotron resonance mass spectrometry: the effect of calcium binding on the calmodulin-melittin complex

Calmodulin is an EF hand calcium binding protein. Its binding affinities to various protein/peptide targets often depend on the conformational changes induced by the binding of calcium. One such target is melittin, which binds tightly to calmodulin in the presence of calcium, and inhibits its function. Chemical cross-linking combined with Fourier transform ion cyclotron resonance mass spectrometry has been employed to investigate the coordination of calmodulin and melittin in the complex at different concentrations of calcium. This methodology can be used to monitor structural changes of proteins induced by ligand binding, and study the effects these changes have on non- covalent interactions between proteins. Cross-linking results indicate that the binding place of the first melittin in the calcium free calmodulin form is the same as in the calcium loaded calmodulin/melittin complex.     

A plasma source for Fourier transform mass spectrometry

A plasma source has been designed so as to inject plasma directly into a Fourier transform mass spectrometer analysis cell. The source is a small radio-frequency cavity in which gas is ionized with RF. The source is coupled to the analysis cell through a small orifice. Argon irons from an argon plasma produced in the source have been injected, trapped and heated (excited), and detected in the analysis cell.     

Artifacts in Fourier transform mass spectrometry

Recent work on a new, higher sensitivity preamplifier design for Fourier transform ion cyclotron resonance mass spectrometry (FTICRMS) revealed a number of artifact peaks (spectral features) which do not contain useful chemical information. In order to determine the cause of these artifacts and eliminate them, these severely distorted spectra were compared with similarly distorted signal models. The source of several common signal processing artifacts was thereby determined and correlated to radio‐frequency interference (RFI) noise and saturation of the amplifier and/or the digitizer. Under such conditions, the fast Fourier transform (FFT) generates spectral artifact peaks corresponding to harmonics and mixing frequencies of the real signal peaks and RFI frequencies. While this study was done using FTICRMS data, it is important to stress that these artifacts are inherent to the digitization and FFT process and thus are relevant to any FT‐based MS instrument, including the orbitrap and FT ion trap. Copyright © 2009 John Wiley & Sons, Ltd.     

Development of an analytical methodology using Fourier transform mass spectrometry to discover new structural analogs of wine natural sweeteners

Volatile and non-volatile molecules are directly responsible for the thrill and excitement provided by wine-tasting. Their elucidation requires powerful analytical techniques and innovative methodologies. In a recent work, two novel sweet compounds called quercotriterpenosides (QTT) were identified in oak wood used for wine-ageing. The aim of the present study is to discover structural analogs of such natural sweeteners in oak wood. For this purpose, an analytical approach was developed as an alternative to chemical synthesis. Orbitrap mass spectrometry proved to be a crucial technique both to demonstrate the presence of QTT analogs in oak wood by targeted screening and to guide the purification pathway of these molecules using complementary chromatographic tools. Four compounds were isolated and identified for the first time: two isomers, one glucosyl derivative and one galloyl derivative of QTT. Their tasting showed that only the two new isomers were sweet, thus demonstrating both the pertinence of the strategy and the influence of functional groups on gustatory properties. Finally, this paper presents some developments involving multistage Fourier transform mass spectrometry (FTMS) to provide solid structural information on these functional groups prior to any purification of compounds. Such analytical developments could be particularly useful for research on taste-active or bio-active products.     

Principles of Fourier transform ion cyclotron resonance mass spectrometry and its application in structural biology

Fourier transform ion cyclotron resonance (FT-ICR) mass spectrometry has become increasingly significant within recent years. The inherently ultra-high resolution and mass accuracy allow unequivocal assignments of chemical formulae to be made and further structural elucidation can be conducted through the utilization of tandem mass spectrometry techniques. With the advent of electrospray ionization (ESI), FT-ICR mass spectrometry has become a powerful tool for the investigation of biological macromolecules, such as the study of non-covalent interactions of proteins. In this article, the basic principles are highlighted, some of the techniques employed are described and examples of applications are provided, with particular respect being paid to the field of characterization of biomolecules.     

Probing Akt-inhibitor interaction by chemical cross-linking and mass spectrometry

The serine/threonine kinase Akt is a critical enzyme that regulates cell survival. As high Akt activity has been shown to contribute to the pathogenesis of various human malignancies, inhibition of Akt activation is a promising therapeutic strategy for cancers. We have previously demonstrated that changes in Akt interdomain arrangements from a closed to open conformation occur upon Akt-membrane interaction, which in turn allows Akt phosphorylation/activation. In the present study, we demonstrate a novel strategy to discern mechanisms for Akt inhibition based on Akt conformational changes using chemical cross-linking and ¹⁸O labeling mass spectrometry. By quantitative comparison of two interdomain cross-linked peptides, which represent the proximity of the domains involved, we found that the binding of Akt to an inhibitor (PI analog) caused the open interdomain conformation where the PH and regulatory domains moved away from the kinase domain, even before interacting with membranes, subsequently preventing translocation of Akt to the plasma membrane. In contrast, the interdomain conformation remained unchanged after incubating with another type of inhibitor (peptide TCL1). Subsequent interaction with unilamellar vesicles suggested that TCL1 impaired particularly the opening of the PH domain for exposing T308 for phosphorylation at the plasma membrane. This novel approach based on the conformation-based molecular interaction mechanism should be potentially useful for drug discovery efforts for specific Akt inhibitors or anti-tumor agents.     

Application of maximum entropy spectral analysis to Fourier transform mass spectrometry

The maximum entropy spectral analysis has been applied to the time domain signals obtained in a Fourier transform mass spectrometer. The method, employing at most a few hundred points from the digitized signals, is shown to produce mass spectra that are devoid of the sidelobes present in fast Fourier transformation and exhibit mass resolution that is superior to that obtained by the latter using several thousand data points.     

A Fourier transform time-of-flight mass spectrometer. A SIMION calculation approach

A new kind of approach to time-of-flight type spectrometers is presented on the basis of SIMION calculations. The detector studied is a short cylindrical tube capacitor closed with parallel plates at both ends. The main principle of operation is to force ions of equal energy to circulate in the volume between the two tubes on a path of equal radius and measure their flight times pro revolution which corresponds to the frequency of oscillation. By performing spectral analysis on the received signal through transformation from the time domain to frequency space the different masses can be detected.To study the expected performance of the FT-TOF detector, calculations of ion trajectories have been made by varying the dimensions and electric potentials of the electrodes. The effect of the beam position, variations in the angle of entrance and ion energy to the trajectories was calculated to monitor the resolution that is achievable.     

Matrix-free mass spectrometric imaging using laser desorption ionisation Fourier transform ion cyclotron resonance mass spectrometry

Mass spectrometry imaging (MSI) is a powerful tool in metabolomics and proteomics for the spatial localization and identification of pharmaceuticals, metabolites, lipids, peptides and proteins in biological tissues. However, sample preparation remains a crucial variable in obtaining the most accurate distributions. Common washing steps used to remove salts, and solvent-based matrix application, allow analyte spreading to occur. Solvent-free matrix applications can reduce this risk, but increase the possibility of ionisation bias due to matrix adhesion to tissue sections. We report here the use of matrix-free MSI using laser desorption ionisation performed on a 12 T Fourier transform ion cyclotron resonance (FTICR) mass spectrometer. We used unprocessed tissue with no post-processing following thaw-mounting on matrix-assisted laser desorption ionisation (MALDI) indium-tin oxide (ITO) target plates. The identification and distribution of a range of phospholipids in mouse brain and kidney sections are presented and compared with previously published MALDI time-of-flight (TOF) MSI distributions.     

A new pyrolysis—mass spectrometry approach to organic marine chemistry using chemical ionization

A new approach is being developed to obtain a great deal of information about the organic chemicals in the marine environment as rapidly as possible. The sample, after drying, is pyrolyzed at four different temperatures and the resulting pyrolyzates are swept into a mass spectrometer operating under chemical ionization conditions to obtain maximum sensitivity while at the same time maintaining to a large extent the integrity of the molecular structure of the pyrolyzates. This results in at least four different pyrogram peaks each composed of at least 100 different ion species. A sample size of only 200 μl is required and the analysis is completed in less than 10 min.Minimal sample manipulation decreases drastically the chance for contamination. Resulting data are computer processed. Possible uses for this approach are water mass differentiation, water mass tracing, determination of covariation between organics and a process of interest, and monitoring the interaction of organics with a process of interest. The chief advantage of this approach is that our interpretation of the role that organics play in the marine environment will be less limited by the availability of sample, personnel, and time. The chief limitation is our inadequate understanding of pyrolysis mechanisms and how pyrolyzates behave under chemical ionization-mass spectrometric conditions. This should rapidly improve with more research.The approach was tested successfully by looking at the similarities and differences between two coastal bodies of water, one more influenced by terrestrial run-off than the other.     

Focus on Fourier transform ion cyclotron resonance mass spectrometry

Editorial

Focus on Fourier transform ion cyclotron resonance mass spectrometry     

Characterization of imazamox degradation by-products by using liquid chromatography mass spectrometry and high-resolution Fourier transform ion cyclotron resonance mass spectrometry

The photodecomposition of imazamox, a herbicide of the imidazolinone family, was investigated in pure water. The main photoproducts from the photolysis were followed over time by liquid chromatography mass spectrometry and structures were proposed from exact mass determinations obtained by electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry. The method comprised exact mass determination with better than 0.2 ppm mass accuracy and a corresponding structural visualization taking care of respective isotopes with an adapted van Krevelen diagram that enabled a systematic approach to the characterisation of the elementary composition of each photoproduct. By taking advantage of the high resolving power of FT-ICR MS to make precise formula assignments, the derived 2D van Krevelen diagram (O/C; H/C; m/z) enabled one to structurally differentiate the formed photoproducts and to propose a degradation pathway for imazamox. Figure Overview of applied method to analyse the photolysis process of imazamox herbicide