Metal Complexes with Macrocyclic Ligands. Part XXVI. Synthesis and spectral properties of Cu2+ complexes with mono-N-functionalized 1,4,8-trimethyl-1,4,8,11-tetraazacyclotetradecanes

A series of mono-N-functionalized 1,4,8-trimethyl-1,4,8,11-tetraazacyclotetradecanes 3 – 14 were synthesized by alkylating the secondary N-atom of the macrocycle 1 . The spectral properties of the Cu²⁺ complexes, studied under different pH conditions, are discussed in relation to the possibility of coordination of the donor group of the side chain to the axial position of the metal ion and to the effect of the length of the side chain.     

Metal Complexes with Macrocyclic Ligands. Part XXVIII.. Structures and stabilities of the Cu2+ complexes with 1,4,7-triazacyclononane-1-acetic acid

The potentiometric study of the complexation of 1,4,7-triazacyclononane-l-acetic acid ( 1 ) with Cu²⁺ (I = 0.5 (KNO₃), T = 25°) indicates the presence of the species [Cu( 1 )], [Cu( 1 )OH], [Cu( 1 )₂], and [(Cu( 1 ))₂OH], the stability constants of which are determined. The two complexes [Cu( 1 )]ClO₄ and [(Cu( 1 )₂)OH]ClO₄ were also characterized by X-ray structure analysis. In both cases, the Cu²⁺ ion is in a distorted square-pyramidal arrangement, penta-coordinated by the three N-atoms of the macrocycle, an O-atom of the carboxylate, and an additional O-atom either from a second carboxylate or from an OH^?, acting as a bridge between two metal centres.     

Metal Complexes with Macrocyclic Ligands Part XXX. Synthesis and structure of halocuprates of tetraprotonated 1,4,8,11-tetraazacyclotetradecane and its Cu2+ complex

By mixing acidic solutions of 1,4,8,11-tetraazacyclotetradecane (Cy) with CuX₂ (X = Cl^?, Br^?), either the hexahalocuprates of the tetraprotonated form of the macrocycle ([CyH₄] [CuX₆]) or the tetrahalocuprates of its Cu²⁺ complex ([CuCy] [CuX₄]) are obtained. The structures of the chloro derivatives are established by X-ray diffraction analysis. In [CyH₄] [CuCl₆], the Cu²⁺ is in a tetragonally distorted octahedral geometry with four short and two long Cu? Cl bonds. The tetraprotonated macrocycle is centrosymmetric, and its conformation is exodentate, so that the four ammonium groups are as far as possible from each other to minimize the electrostatic repulsion. In [CuCy] [CuCl₄], the Cu²⁺ ion complexed by the macrocycle is surrounded by four N-atoms in a square-planar arrangement. In addition, the axial positions are occupied by two Cl^? ions of two CuCl units, which act as bridges. The macrocycle is in the trans-III-configuration. The other Cu²⁺ ion is coordinated by four Cl^? ions in a distorted tetrahedral geometry. IR and VIS spectra of the chloro and bromo derivatives are used to discuss the structure of the bromo species.     

Metal Complexes with Macrocyclic Ligands. Part XXI. A nonlinear relationship between the stability of Cu2+ complexes and their complexation rate with 1,4,8,11-tetraazacyclotetradecane

The kinetics of the reaction (1) between 1,4,8,11-tetraazacyclotetradecane (Cy) and a series of Cu(II) complexes CuL (L) = glycolate, malonate, succinate, picolinate, glycinate, iminodiacetate, nitrilotriacetate, N-(2-hydroxyethyl)ethylenediaminetriacetate, ethyienediamine, 1,3-diaminopropane, diethylenetriamine and N,N-bis(3-aminopropylamine) were studied spectrophotometrically at 25° and I = 0.5 (KNO₃). From the analysis of the log k_obs/log [L] profiles obtained at different pH values the resolved bimolecular rate constants k (Table 3) were obtained by a nonlinear curve-fitting procedure. For nearly all systems studied, the rate constant k, describing the reaction between the 1:1 complex CuL and the monoprotonated form of the macrocycle CyH, was obtained. The nonlinear relationship between log k and log K_CuL and its nature is discussed. It is shown that the inverse relationship between reactivity and stability described by others is only a special case of the more general Eqn. 3 described here.     

Metal Complexes of Ditopic and Polytopic Macrocyclic Ligands

Soft Supramolecular Materials (SSM) are multicomponent materials formed bythe bulk supramolecular assembly/aggregation of building units into a regularstructure, with stronger bonding within building units and weaker bondingbetween them. The nature of the building units may vary from simple moleculesto nanoparticles, and the forces linking the units together may vary from coordinativeto van der Waals. Recently SSM have attracted a great deal of attention due to theirwide variability, easy conversion from one structure to another, and active responseto external stimuli. It seems evident that the progress in the chemistry of SSMpredestines the appearance of a new generation of functional and ``smart'' materials.     

Metal Complexes of Macrocyclic Ligands. XII. A Complexone-like Tetraazamacrocycle

The complexone-like tetraazamacrocycle 1 (LH₄) forms a series of metal complexes with Co²⁺, Ni²⁺, Cu²⁺ and Zn²⁺ (M²⁺) of the type MLH₂, ML^2? and M₂L, which have been isolated and characterized by VIS., IR. and NMR. spectroscopy. Based on these results tentative structures for the different species are proposed.     

Metal Complexes with Macrocyclic Ligands. Part XXXII. Reactivity studies of the pendant carboxylic group in a macrocyclic Cu2+ complex towards amide formation and its use as a protein-labelling agent

The Cu²⁺ complex of 1 , having a non-coordinating carboxylic group, can be reacted under the typical conditions of peptide formation with amines such as 2-methylpropylamine or (pyrid-2-yl)methylamine to give, after removal of Cu²⁺ with CN^?, the amides 4 and 5. The Cu²⁺ ion is of paramount importance since it protects the four amino groups of the macrocycle so that the amide condensation can specifically be done with the exogenous amine It is also shown that the Cu²⁺ complex of 1 can be covalently attached to bovine serum albumin (BSA), thus opening the possibility to use this compound as a labelling agent for proteins and antibodies.     

Metal Complexes with Macrocyclic Ligands. Part XXXI. Protonation studies and complexation properties of tetraazamacrocyclic methylenephosphonates with earth-alkali ions

The three ligands 1,4,7,10-tetraazacyclododecane-1,4,7,10-tetrakis(methylenephosphonic acid) ( 1 ), 1,4,7,11-tetraazacyclotridecane-1,4,7,11-tetrakis(methylenephosphonic acid) ( 2 ), and 1,4,8,11-tetraazacyclotetradecane-1,4,8,1 1-tetrakis(methylenephosphonic acid) ( 3 ) have been synthesized by condensation of the corresponding macrocycles with formaldehyde and phosphorous acid. The protonation and stability constants with the earth-alkali ions have been determined at 25° and I = 0.1 M (Me₄)N(NO₃) by potentiometric titrations. Because of the high values of the first two protonation constants, ¹H-NMR measurements were necessary to determine them. Titrations in different supporting electrolytes (NaNO₃, KNO₃, RbNO₃, CsNO₃, and Me₄N(NO₃)) show that their choice is of paramount importance, as the above ligands can form complexes with alkali-metal ions. The potentiometric results for the earth-alkali ions show that beside mononuclear complexes of different degrees of protonation ([MLH_n], n = 0–4), also binuclear species are formed ([M₂LH_m], m = 0–2). It is interesting that 1 with the smallest macrocyclic ring has the greatest tendency to form binuclear complexes, which are so stable that they partially prevent the formation of the corresponding mononuclear species. For [ML], [MLH], [M₂L], and [M₂LH], the stability sequence is Mg²⁺ < Ca²⁺ > Sr²⁺ > Ba²⁺, whereas for [MLH₂], [MLH₃], and [MLH₄], the stability steadily decreases from Mg²⁺ to Ba²⁺.     

Metal Complexes with Macrocyclic Ligands,V. Formation and dissociation kinetics of the pentaco-ordinated Ni2+, Cu2+, Co2+ and Zn2+ complexes with 1,4,8,11-tetramethyl-1,4,8,11-tetraazacyclotetradecane

The formation and dissociation kinetics of the pentaco-ordinated Cu²⁺, Ni²⁺, Co²⁺ and Zn²⁺ complexes with 1,4,8,11-tetramethyl-1,4,8,11-tetraazacyclotetradecane (4-MeCyclam-14) was studied by pH-stat techniques and spectrophotometrically. The rates of the reactions between 4-MeCyclam-14 and each of the four metal ions, although slower than normal complexations by a factor of 10³?10⁴, closely follow the order Cu²⁺ > Zn²⁺ > Co²⁺ > Ni²⁺, found for the rate of water exchange. This implies that beside water exchange an other constant factor plays an important role in the rate determing step. The dissociation of the pentaco-ordinated 4-MeCyclam-14 complexes is acid catalyzed. The limiting rate for acid dissociation is not reached even in 2.5M HNO₃ in the case of Ni(4-MeCyclam-14)²⁺. From the formation and dissociation rates stability constants have been calculated, which do not show any macrocyclic effect.     

Metal Complexes with Macrocyclic Ligands. IX. Synthesis and properties of a new class of branched N4-macrocycles with an additional ligating group in the side chain

In the presence of Ni²⁺ the template reaction between 2,6-diacetylpyridine and 4-(2-dimethylaminoethyl)- or 4-(2-hydroxyethyl)-1, 7-diamino-4-azaheptane yields the complexes of either the open-chain ligand ( 3 and 11 ) or of the macrocycle ( 4 and 12 ). Reduction of the imino group in 4 and 12 with PtO₂/H₂ gives 5 and 13 , respectively. In the case of the dimethylamino derivative 5 a mixture of at least four isomers was obtained. These were partially separated by chromatography on Sephadex SP-25 cation exchanger. Through demetalation of the Ni²⁺ complexes by cyanide the new macrocycles 7 and 14 were isolated, from which the corresponding Zn²⁺ and Cu²⁺ complexes were prepared. The macrocyclic Ni²⁺-complexes 4, 12, 5 and 13 can exist in two forms depending on the pH of the solution. At low pH protonation of the dimethylamino or hydroxy group in the side chain occurs. The metal ion is then bound to the four nitrogen atoms of the macrocycle in a square planar ligand field. At higher pH, however, the dimethylamino or hydroxy group (the last one also in its deprotonated form) can coordinate to one of the axial positions, whereby pseudooctahedral coordination geometry is induced. This reaction can be quantitatively described by a reversible acid-base equilibrium, the pK_H of which greatly depends on the nature of the functional group, the degree of unsaturation of the macrocycle and the metal ion. The acid-base reaction and the concomitant structural change are a direct consequence of the unique combination of the rigid and kinetically stable structure of the macrocycle and of the flexible and kinetically labile functional group of the side chain.     

Metal Complexes with Macrocyclic Ligands. PartXLV Axial coordination tendency in reinforced tetraazamacrocyclic complexes

The Cu²⁺ and Ni²⁺ complexes of three reinforced tetraazamacrocycles, containing a piperazine subunit and one or two alkyl substituents at the other two N-atoms have been prepared and their structural properties studied. In solution, the Ni²⁺ complexes are square-planar and show no tendency to axially coordinate a solvent molecule or an N ion. In contrast, the Cu²⁺ complexes change their geometry depending upon the donor properties of the solvent, being square-planar in MeNO₂ and pentacoordinate in DMF. They also easily react in aqueous solution with N to give ternary species with pentacoordinate geometry, the stabilities of which have been determined. In the solid state, the X-ray crystal structures of three Cu²⁺ complexes also show both geometrical arrangements, two having a square-planar, the other one a distorted square pyramidal geometry. The difference behavior of Ni²⁺ and Cu²⁺ stems from the fact that the structural change from square-planar to square-pyramidal can easily be accomplished for Cu²⁺, whereas, for Ni²⁺, it is accompanied by an electronic rearrangement from the low-spin to the high-spin configuration. The relatively rigid ligands cannot Adapt to the somewhat larger high-spin Ni²⁺ion.     

Metal Complexes with Macrocyclic Ligands. Part XL. Syntheses and silver(I) complexes of mono- and disubstituted dithiadiazamacrocycles

A series of N₂S₂-macrocycles with ring sizes varying between 12 and 16, as well as two 12-membered N₂S₂-rings with a pendant carboxylic and amino group, respectively, were synthesized. Their complexation properties towards Ag⁺ were studied by pH titrations and by potentiometry with a silver electrode. The observation that 1:1 ([AgLH₂]³⁺, [AgLH]²⁺, [AgL]⁺) and 1:2 species ([AgL₂H₂]³⁺, [AgL₂H]²⁺, [AgL₂]⁺) were formed is interpreted by postulating that Ag⁺ can bind either to the S-donors only, or to both the N- and S-atoms. The most stable complex [AgL]⁺ in the series of the nonfunctionalized macrocycles was found for the 12-membered N₂S₂-ring 3 . The stability of it increased when an additional donor group was introduced into the side chain. The highest formation constant (logβ₁₁₀ = 14.43(1)) was obtained with the 12-membered ring 12 carrying the ethanamine side chain. In view of a radiochemical application, all Ag⁺ complexes were tested in blood serum for their stability, but were not stable enough against transmetallation.     

Metal Complexes with Macrocyclic Ligands. XV. The Complexation Kinetics of Open Chain and Cyclic Tetraazaligands with Ni2+ in DMSO and DMF

The complexation kinetics of 2,6,9, 13-tetraazatetradecane (1) , 1,4,8, 11-tetraazacyclotetradecane (2) and N,N′,N″,N'-tetramethyl-1,4,8, 11-tetraazacyclotetradecane (3) with Ni²⁺ were studied by the stopped-flow technique in DMSO and DMF. The biomecular rate constants k_L^Ni (Table 2) follow in both solvents the order 1 ? 2 > 3. The similar complexation rates of 1 and 2 in their unprotonated form indicate that for both the open chain and the cyclic ligand the same mechanism holds. By comparison with the solvent exchange the rate determining step of the complexation is the dissociation of the first solvent molecule in the outer-sphere complex. The lower reactivity of 3 is probably due to steric effects. In the case of 2 a second step in the complexation process was observed and explained by a rearrangement of the ligand already coordinated to the metal ion.     

Metal Complexes with Macrocyclic Ligands. Part XXIX.. Structural and kinetic studies of two isomeric Cu2+ complexes with 1,4-dimethyl-8-[2-(2-pyridyl)ethyl]-1,4,8,11-tetraazacyclotetradecane

The synthesis and complexation properties of 1,4-dimethyl-8-[2-(2-pyridyl)ethyl]-1,4,8,11-tetraazacyclotetra-decane ( 2 ) are described. This ligand forms with Cu²⁺ two complexes, one of which has been characterized by X-ray structure analysis. The structural, spectral, and kinetic studies indicate that the two Cu²⁺ complexes are isomers with the macrocycle in the trans-III and trans-I configuration. The rate of the interconversion of the trans-I isomer to the thermodynamically more stable trans-III species is proportional to [OH^?]. A mechanism for this reaction is proposed.     

Metal Complexes with Macrocyclic Ligands. Part XLIV Kinetics of the Cu2+ incorporation into a macrocyclic ligand conjugated to proteins: Model studies for the d‘post-labeling’ technique

The kinetics of the Cu²⁺ complexation by macrocycles 1 (4-[(l,4,8,11-tetraazacyclotetradec-1-yl)methyl]-benzoic acid) and 2 (N-propyl-4-[(1,4,8,11-tetraazacyclotetradec-1-yl)methyl]-benzamide) as well as by macrocycle 1 conjugated to bovine serum albumin (bsa) and to ribonuclease A (rnase) were studied by stopped flow techniques. For 1 and 2 , the kinetics were followed in the mM range monitoring the d-d* absorption band of the Cu²⁺ complex. From the pH dependence of k_obs, the rate law is v = [Cu²⁺] (k_LH[LH] + k[LH₂]), where k_LH and k are the bimolecular rate constants for Cu²⁺ with the diprotonated (LH₂) and monoprotonated (LH₁) form of the ligand, respectively. The values are k = 1.7( 1 ) M^?1s^?1 and k_LH = 2.3(1) 10⁵ M^?1s^?1 for 1 , and k, = 0.28(9) M^?1s^?1 and k_LH = 2.0(1) 10⁵ M^?1s^?1 for 2. The kinetics of the Cu²⁺ incorporation into 1,2 and 1 conjugated to bsa and rnase, i.e., 3 and 4 , respectively, were also followed using nitroso-R salt as a metal indicator in the μM range, i.e., under conditions typical for the ‘post-labeling’ technique to give radiolabeled monoclonal antibodies. In these cases, the reaction takes place between the 1:1 complex of Cu²⁺ with nitroso-R-salt and the macrocycle. At pH 6.5, the rates are very similar to each other indicating that the complexation properties of the macrocycle attached to a protein are not very different from those of the free ligand under comparable conditions.     

Metal Complexes with Macrocyclic Ligands. Part XLI. Nickel(II) and copper(II) complexes with mono-N-functionalized dithiadiazamacrocycles

Three N₂S₂ macrocycles ( 3, 10, 12 ) carrying an amino group as a pendant arm have been synthesized and their complexation properties towards Ni²⁺ and Cu²⁺ studied. The crystal structures of the Cu²⁺ complexes with 10-methyl-1,4-dithia-7,10-diazacyclododecane-7-ethanamine ( 3 ) and 11-methyl-1,4-dithia-8,11-diazacyclotetradecane-8-ethanamine ( 10 ) show that, in both cases, the Cu²⁺ is pentacoordinated by the four donor atoms of the macrocycle and the amino group of the side chain. In aqueous solution, however, two forms of the complexes with stoichiometries [MLH] and [ML] (M = Cu²⁺ or Ni²⁺) have been observed. In [MLH], the amino group is protonated and does not bind to the metal ion, whereas in [ML] the amino group is bound, and a pentacoordinated geometry results. The pK_a values for the equilibrium [ML] + H⁺?[MLH]⁺ decrease in the order 12 > 10 > 3 , indicating that the 2-aminoethyl side chain binds better to the Cu²⁺ than the 3-aminopropyl side chain. Cyclic voltammetry for the Cu²⁺/Cu⁺ pair shows that the 2-aminoethyl pendant arm stabilizes the Cu²⁺ oxidation state, when the metal ion is in the 14-membered ring ( 10 ), whereas it stabilizes Cu⁺ for the 12-membered macrocycle ( 3 ).     

Metal Complexes with Macrocyclic Ligands. XIV. Formation,dissociation and metal exchange with an N2S2-macrocycle

10, 10, 12-Trimethyl-3,4-benzo-1,6-dithia-9,13-diazacyclopentadecen-dihydrochloride (LH, 2 ) and its Ni²⁺ complex were synthesized and their reactivity studied. The formation kinetics of 2 with Cu²⁺ were found to be a second order reaction between Cu²⁺ or CuACO⁺ and the monoprotonated form of the ligand LH⁺. The rate constant k = 29 M ^?1S ^?1 is 10⁵–10⁶ times smaller than those of monoprotonated tetraazamacrocycles either because of second bond formation or because of a strong electrostatic interaction between the positive charges of the Cu²⁺ and the ammonium group. The metal-metal exchange between NiL⁺ and Cu²⁺ was also investigated. The reaction is independent of [Cu²⁺] and has the same rate and activation parameters as the dissociation of NiL²⁺. In contrast to open chain ligands, no mixed complex CuNiL⁴⁺ as intermediate was observed.     

Reactions of Chelate Complexes with Macrocyclic Ligands. Tetra-tert-butylphthalocyanine

Complexation reactions of tetra-tert-butylphthalocyanine (I) with Cu(II) acetate, acetylacetonate, 8-hydroxyquinolate, glycinate, valinate or dithizonate, as well as with Zn(II), Co(II), and Ni(II) 8-hydroxy-quinolates, valinates, and dithizonates were studied. Unlike porphyrins themselves and porphyrins with planar distortions, compound I was found to form metal phthalocyanines with all indicated chelate salts in common solvents. It was established that compound I exhibits more equalized dependences of the coordination rate on the nature of the salt anion and cation as compared to the majority of the other porphyrins.     

Metal Complexes with Macrocyclic Ligands. Part XLVI. Synthesis and structures of dinuclear metal complexes of bis-macrocycles having a pyrazole bridging unit

Three bis-macrocyclic ligands consisting of two N₃-, N₂S-, or NS₂-cyclononane rings, i.e., of two octahydro-1H-1,4,7-triazonine, octahydro-1,4,7-thiadiazonine, or hexahydro-5H-1,4-7-dithiazonine rings, connected by a 1H-pyrazolediyl unit were prepared. They form dinuclear Cu^II and Ni^II complexes which are able to bind one additional exogenous bridging molecule such as Cl^?, Br^?, N, SO, and 1H-pyrazol-1-ide. The structures determined by X-ray diffraction show that each Cu²⁺ is coordinated by the three donor atoms of the macrocyclic ring, by a pyrazolidodiyl N-atom, by an atom of the exogenous bridging ligand, and sometimes by a solvent molecule. In the majority of the Cu²⁺ cases, the metal ion exhibits square-pyramidal or trigonal-bipyramidal coordination geometry, except in the sulfato-bridged complex, in which one Cu²⁺ is hexacoordinated with the participation of a water molecule. The X-ray structure of the azide-bridged dinuclear Ni²⁺ complex was also solved and shows that both Ni²⁺ centres have octahedral coordination geometries. In all complexes, the 1H-pyrazolediyl group connecting the macrocycles is deprotonated and bridges the two metal centres, which, depending on the exogenous ligand, have distances between 3.6 and 4.5 Å. In the dinuclear Cu²⁺ complexes, antiferromagnetic coupling is present. The azido-bridged complex shows a very strong interaction with ?2J ≥ 1040 cm^?1; in contrast, the H-pyrazol-1-ide and chloride bridged species have ?2J values of 300 and 272cm^?1, respectively. Cyclic voltammetry of the Cu²⁺ complexes in MeCN reveals a strong dependence of the potentials Cu^II/Cu-^II → Cu^II/Cu^I → Cu^I/Cu^I on the nature of the donor atoms of the macrocycle as well as on the type of bridging molecule. The more S-donors are present in the macrocycle, the higher is the potential, indicating a stabilization of the Cu¹ oxidation state.     

Selective metal promoted hydrolysis of nitrile groups in the side chain of tetraazamacrocyclic Cu2+-complexes

The metal promoted hydrolysis of nitrile groups in the side chains of tetraazamacrocyclic Cu2+ complexes has been studied by stopped-flow techniques. It is shown that the reaction proceeds by an intramolecular attack of an axially coordinated OH- onto the nitrile group to give the corresponding amide. In alkaline solution the amide then deprotonates and binds to the axial position of the Cu2+ thus preventing further coordination of an OH-. This explains mechanistically that in the Cu2+ complexes of macrocycles carrying two nitrile functions only one is selectively hydrolysed. The nitrile hydrolysis has also been used on a preparative scale to synthesize tetraazamacrocycles with two different side chains. X-Ray diffractions of several products are presented to confirm the structures and the results from the kinetics and equilibria measurements.