Oxydative Aryl-Aryl-Verknüpfung von 6,6′,7,7′-Tetramethoxy-1,1′,2,2′,3,3′,4,4′-octahydro-1,1′-biisochinolin-Derivaten

Oxidative Aryl-Aryl-Coupling of 6,6′,7,7′-Tetramethoxy-1,1′,2,2′,3,3′,4,4′-octahydro-1,1′-biisoquinoline Derivatives We describe the synthesis of 2 by intramolecular oxidative coupling of 1, 1′-biisoquinoline derivatives 1 (Scheme 1). This heterocyclic system can be considered as a union of two apomorphine molecules and may thus exhibit dopaminergic activity. - The readily available tetrahydrobiisoquinoline 6 was methylated to 11 (Scheme 4) and reduced (with NaBH₃CN) to rac- 7 and (catalytically) to meso- 7 (Scheme 3). Reduction of 11 with NaBH₄ and of the biurethane rac- 9 with LiAlH₄/AlCl₃ afforded meso- and rac- 10 , respectively (Scheme 4). Demethylation of 6 , meso- 10 , meso- and rac- 7 led to 12 , meso- 14 , meso- and rac- 13 , respectively (Scheme 5). The latter two phenols were converted with chloroformic ester to the hexaethoxycarbonyl derivatives meso- and rac- 15 and subsequently saponified to the biurethanes meso- and rac- 16 , respectively (Scheme 5). - In order to assure proximity of the two aromatic rings, the ethano-bridged derivatives meso- and rac- 18 were prepared by condensing meso- and rac- 7 with oxalic ester and reducing the oxalyl derivatives meso- and rac- 17 with LiAlH₄/AlCl₃, respectively (Scheme 6). The ¹H-NMR, spectra at different temperatures showed that rac- 18 populated two conformers but rac- 17 only one, all with C₂-symmetry, and that meso- 17 as well as meso- 18 populated two enantiomeric conformers with C₁-symmetry. Whereas both oxalyl derivatives 17 were fairly rigid due to the two amide groupings, the ethano derivatives 18 exhibited coalescence temperatures of -20 and 30°. - The intramolecular coupling of the two aromatic rings was successful under ‘non-phenolic oxidative’ conditions with the tetramethoxy derivatives 7, 10 and 18 , the rac-isomers leading to the desired dibenzophenanthrolines, the meso-isomers, however, mostly to dienones (Scheme 9): With VOF₃ and FSO₃H in CF₃COOH/CH₂Cl₂ rac- 7 was converted to rac- 19 , rac- 18 to rac- 21 and rac- 10 to a mixture of rac- 20 and the dienone 23b of the morphinane type. Under the same conditions meso- 10 was transformed to the dienone 23a of the morphinane type, whereas meso- 18 yielded the dienone 24 of the neospirine type, both in lower yields. The analysis of the spectral data of the six coupling products offers evidence for their structures. With the demethylation of rac- 20 and rac- 21 to rac- 25 and rac- 26 , respectively, the synthetic goal of the work was reached, but only in the rac-series (Scheme 10). - In the course of this work two cleavages of octahydro-1,1′-biisoquinolines at the C(1), C(1′)-bond were observed: (1) The biurethanes 9 and 16 in both the meso- and rac-series reacted with oxygen in CF₃COOH solution to give the 3,4-dihydroisoquinolinium salts 27 and 28 ; the latter was deprotonated to the quinomethide 30 (Scheme 11). (2) Under the Clarke-Eschweiler reductive-methylation conditions meso- and rac- 7 were cleaved to the tetrahydroisoquinoline derivative 32 .     

Synthesis and properties of polyimides from 4,4′-binaphthyl-1,1′,8,8′-tetracarboxylic dianhydride

4,4′-Binaphthyl-1,1′,8,8′-tetracarboxylic dianhydride was synthesized from 4-chloro-1,8-naphthalic anhydride and polymerized with aromatic and pliphatic diamines in m-cresol or N-methyl-2-pyrrolidinone (NMP). The polyimides, except for two derived from p-phenylenediamine and hydrazine, are soluble in 1,1,2,2-tetrachloroethane and NMP. Their intrinsic viscosities ranged from 0.36 to 2.20 dL/g. The polymers showed excellent thermal and thermooxidative stabilities and displayed weak glass transition temperatures. Young's moduli of some polymer films were in the range of 2.5 and 5.4 GPa at 30°C. The aliphatic polyimides exhibited a stronger fluorescence than the aromatic polyimides. © 1995 John Wiley & Sons, Inc.     

Synthesis of 1,2′,3,3′,5′,6′-hexahydro-3-phenylspiro[isobenzofuran-1,4′-thiopyrans] and 1,2′,3,3′,5′,6′-hexahydro-3-phenylspiro-[isobenzofuran-1,4′-pyrans]

The 1,2′,3,3′,5′,6′-hexahydro-3-phenylspiro[isobenzofuran-1,4′-thiopyran] ring system ( 2a ) has been prepared from o-bromobenzoic acid. The 1,2′,3,3′,5′,6′-hexahydro-3-phenylspiro[isobenzofuran-1,4′-pyran] ring system ( 3a ) has been prepared from 2-bromobenzhydrol methyl ether. Several 3-(dimethylaminoalkyl) derivatives of both 2a and 3a were prepared by lithiation followed by alkylation.     

Biselenienyl series. II. Synthesis and resolution of 2,2′-dinitro-3,3′-biselenienyl-4,4′-dicarboxylic acid

2,2′-Dinitro-3,3′-biselenienyl-4,4′-dicarboxylic acid (VI), the first recorded compound of the 3,3′-biselenienyl series, has been prepared and resolved into its optical antipodes by fractional crystallization of its brucine salt. On the basis of the quasi-racemate method of Fredga and the O.R.D. spectra, to the dextrorotatory acid is assigned the R configuration.     

New heterocyclic derivatives of 1′- and 3′-amino-5′,6′,7′,8′-tetrahydro-2′-acetonaphthones

The preparation of 1′-and 3′-amino-5′,6′,7′,8′-tetrahydro-2′-acetonaphthones (IIIa and IIIb) is described, by reduction of the low temperature nitration products of 5′,6′,7′,8′-tetrahydro-2′-acetonaphtone (I). The structures of the nitro isomers (IIa and IIb), and the reduction products, IIIa and IIIb, were elucidated spectroscopically. By known reactions, a series of new heterocyclic compounds prepared from the o-aminoketones, IIIa and IIIb, resulted in two series of new heterocyclic compounds.     

Synthesis and characterization of photosensitive polyimides from methylthiomethyl-substituted 4,4′-diaminodiphenylmethanes and 3,3′,4,4′-benzophenonetetracarboxylic dianhydride

A series of novel polyimides are synthesized by the reaction of 3,3′,4,4′-benzophenonete-tracarboxylic dianhydride (BTDA) with four methylthiomethyl-substituted aromatic diamines: 3-methylthiomethyl-4,4′-diaminodiphenylmethane ( I ), 3,3′-dimethylthiomethyl-4,4′-diaminodiphenylmethane ( II ), 3,3′,5-trimethylthiomethyl-4,4′-diaminodiphenylmethane ( III ), and 3,3′,5,5′-tetramethylthiomethyl-4,4′-diaminodiphenylmethane ( IV ) in refluxing m-cresol. The polyimide of diamine I and BTDA carrying only one pendant methylthiomethyl group in a repeating unit is readily soluble in m-cresol, chloroform, and polar aprotic solvents. Increasing the number of the pendant group results in higher solubility. These fully imidized polyimides are also intrinsically photosensitive. The fraction of photoreactive benzophenone sites that relates to the rate and degree of completion of photocrosslinking reaction increases systematically with the increase of the pendant group content. As the average number of the pendant group in a repeating unit reaches 3, 63% of benzophenone sites are found to be photoreactive. These methylthiomethyl-substituted polyimides possess moderate tensile strength which falls in the range of 67–81 MPa. As a result of the increase of methylthiomethyl content, this type of polyimide reveals higher glass transition temperature but lower thermal stability due to the considerable dimension of the pendant group and the ready cleavage nature of the C? S bond. © 1993 John Wiley & Sons, Inc.     

Preparation of 3,4,5,3′-Tetramethoxy-4′,5′-Methylenedioxybenzophenone and Bis-(3-Methoxy-4,5-Methylenedioxy)-Benzophenone

The preparation of 3,4,5,3′-tetramethoxy-4′,5′-methylenedioxybenzophenone (I) and bis-(3-methoxy-4,5-methylenedioxy)-benzophenone(II) were reported. The synthesis of these compounds were accomplished using two separate synthetic routes starting from gallic add and its derivatives to the corresponding benzils. Both compound I and II were obtained by benzilic acid rearrangement of the benzils and followed by an oxidative decarboxylation.     

Synthesis of 5′-halo-2′,3′-lyxo-epoxy and 2′,3′-unsaturated thieno[3,2-d]pyrimidine nucleosides

A series of thieno[3,2-d]pyrimidine-2,4-dione nucleosides modified in the carbohydrate moiety has been synthesized. In the first part, synthetic routes are described for the replacement of 5′-hydroxyl group in preformed 1-(β-D-ribofuranosyl)thieno[3,2-d]pyrimidine-2,4-dione I by fluoro, iodo or chloro atoms. Reduction of the 5′-iodo substituent of VI was then carried out catalytically using palladium on carbon as catalyst to give the expected 5′-deoxy derivative VIII. The lyxo-epoxide derivative XII was then synthesized by sequential treatment of the 5′-deoxy-5′-chloro derivative X with methanesulfonyl chloride and with sodium hydroxide. In the second part, most of attention has been devoted to apply different methods reported in the literature that allow access to 2′,3′-olefinic derivatives from the corresponding 2′,3′-dihydroxy precursor. The 5′-O-silyl protected bisxanthate XIV either on reduction with tri-n-butyltin hydride or by reductive elimination of the haloacetate XVI afforded the free 2′,3′-olefin nucleoside after removal of the 5′-protecting group. However none of the compounds in this series exhibited significant antiviral activity against HIV at the doses tested.     

Synthesis and characterization of soluble polyimides derived from [1,1′;4′,1″]terphenyl‐2′,5′‐diol and biphenyl‐2,5‐diol

Two series of polyimides based on laterally attached p‐terphenyl and biphenyl groups were synthesized. The solubility and thermal properties were studied using DSC, thermogravimetric analysis, and the solubility test. These polymers exhibited good thermal stability and excellent solubility. The high solubility for both polymer series was attributed to the non‐coplanarity of diamine monomers and the use of fluorinated dianhydride, whereas the slightly better solubility for polymers based on p‐terphenyl was attributed to further weakening of interchain interaction of the polymers. Both polymer series exhibited glass‐transition temperatures (T_g's) in the range of 244–272 °C. The T_g's of polymers containing laterally attached p‐terphenyls were higher than those of their counterparts containing biphenyls by 5–17 °C. This was attributed to the formation of an interdigitated structure that hinders the segmental movement of polymer chains. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2998–3007, 2001     

Nucleosides 4: Synthesis of 2′,3′-Didehydro-2′,3′-dideoxydoridosine and 2′,3′-Dideoxydoridosine as Potential Antihypertensive Agents

To measure the hydrophobic character of the ribose moiety of doridosine on the adenosine receptors, 2′,3′-didehydro-2′,3′-dideoxydoridosine (2) and 2′,3′-dideoxydoridosine (3) were prepared. Initial treatment of doridosine with N,N-dimethylformamide diethylacetal, and subsequently with tert-butyldimethylsilyl chloride gave 5. Compound 5 was then reacted with 1,1′-thiocarbonyldiimidazole and the resulting thionocarbonate 6 was heated with triethyl phosphite at 135°C to afford 7. Treatment of compound 7 with tetrabutylammonium fluoride and methanolic ammonia furnished compound 2 in good yield. Compound 2 was subjected to catalytic hydrogenation affording compound 3 in 85% yield.     

Folic acid analogs. Modifications in the benzene-ring region. 5. 2′,6′-diazafolic acid

The synthesis of 2′,6′-diazafolic acid was accomplished by the condensation of 2-acetylamino-4(3H)pteridinone-6-earboxaldehyde (XIV) with diethyl N-[(5-amino-2-pyrimidinyl)carbonyl]-L-glutamate (XIII) followed by reduction of the anil double bond and alkaline hydrolylic cleavage of the N²-acetyl and ethyl ester protecting groups. Intermediate XIII was prepared by starling with 5-nitro-2-styrylpyrimidine (VI) and proceeding via 5-arnino-2-styrylpyrimidine (IX). The henzyloxycarbonyl derivative of IX was prepared and oxidized to the corresponding 5-benzyloxycarbonylaminopyrimidine-2-carboxylic acid (XI). The coupling of XI with diethyl L-glutamate followed by hydrogenolysis of the henzyloxycarbonyl function afforded the desired intermediate XIII. 2′,6′-Diazafolic acid was a potent inhibitor of Streptococcus faecium and displayed marginal activity against leukemia 1,1210 in mice.     

Synthesis and Properties of 2′-Deoxy-1′,2′-seco-D-ribosyl (5′ → 3′)oligonucleotides (= 1′,2′-seco-DNA) containing adenine and thymine

Some 2′-deoxy-1′,2′-seco-D-ribosyl (5′→3′)oligonucleotides (= 1′,2′-seco-DNA), differing from natural DNA only by a bond scission between the centers C(1′) and C(2′), were synthesized and studied in order to compare their structure properties and pairing behavior with those of corresponding natural DNA and homo-DNA oligonucleotides (2′,3′-dideoxy-β-D-glucopyranosyl oligonucleotides). Starting from (?)-D-tartaric acid, 2′-deoxy-1′,2′-secoadenosine derivative 9a and 1′,2′-secothymidine ( 9b ) were obtained in pure crystalline form. Using the phosphoramidite variant of the phosphite-triester method, a dinucleotide monophosphate 1′,2′-seco-d(T₂) was synthesized in solution, while oligonucleotides 1′,2′-seco-d[(AT)₆], 1′,2′-seco-d(A₁₀) and 1′,2′-seco-d(T₁₀) were prepared on solid phase with either automated or manual techniques. Results of UV- and CD-spectroscopic as well as gel-electrophoretic studies indicated that neither adenine-thymine base pairing (as observed in natural DNA and homo-DNA), nor the adenine-adenine base pairing (as observed in homo-DNA) was effective in 1′,2′-seco-DNA, Furthermore, hybrid pairing was observed neither between 1′.2′-seco-DNA and natural DNA nor between 1′,2′-seco-DNA and homo-DNA.     

Synthesis of 5-Methyluridine and Its 5′-Mercapto-, 2-Amino-, and 4′,5′-Unsaturated Analogues

The stereospecific cis-hydroxylation of 1-(2,3-dideoxy-β-D -glyceropent-2-enofuranosyl)thymine (1) into 1-β-D -ribofuranosylthymine (2) by osmium tetroxide is described. Treatment of 2′,3′-O, O-isopropylidene-5-methyl-2,5′-anhydrouridine (8) with hydrogen sulfide or methanolic ammonia afforded 5′-deoxy-2′,3′-O, O-isopropylidene-5′-mercapto-5-methyluridine (9) and 2′,3′-O, O-isopropylidene-5-methyl-isocytidine (10) , respectively. The action of ethanolic potassium hydroxide on 5′-deoxy-5′-iodo-2′,3′-O, O-isopropylidene-5-methyluridine (7) gave rise to the corresponding 1-(5-deoxy-β-D -erythropent-4-enofuranosyl)5-methyluracil (13) and 2-O-ethyl-5-methyluridine (14) . The hydrogenation of 2 and its 2′,3′-O, O-isopropylidene derivative 4 over 5% Rh/Al₂O₃ as catalyst generated diastereoisomers of the corresponding 5-methyl-5,6-dihydrouridine ( 17 and 18 ).     

Some reactions of 4-[(2′,3′-diphenyl-6′-methoxy-5′-benzofuranyl)-methylene]- and 4-[(2′,3′-diphenyl-5′-methoxy-6′-benzofuranyl)-methylene]-2-phenyloxazolin-5-one

2,3-Diphenyl-5-formyl-6-methoxybenzofuran was reacted with hippuric acid to give 4-[(2′,3′-diphenyl-6′-methoxy-5′-benzofuranyl)methylene]-2-phenyloxazolin-5-one. The above mentioned oxazolone yielded 2,3-diphenyl-6-methoxybenzofuranylacetic acid by reaction with hydrazine hydrate, nitrous acid, benzene followed by acid hydrolysis. The reactions of the oxazolone with hydroxylamine hydrochloride and primary or secondary amines were also investigated.