Studies on polymerization of vinyl acetate using ylide as an initiator and degradative transfer agent

Polymerization of vinyl acetate initiated by β-picolinium p-chlorophenacylide was carried out at 30, 35, and 40°C, using conventional dilatometric technique. The initiator and the monomer exponent values were 0.80 ± 0.15 and unity, respectively. The polymerization was inhibited in the presence of hydroquinone, but was favored by nonpolar solvent and polymerization temperature. The energy of activation was 90.3 KJ mol^?1. An average value of k/k_t for the present system was found to be 0.37 × 10^?2. The results are explained in terms of a radical mode of polymerization with degradative initiator transfer; the principal mode of termination, however, was bimolecular.     

Anionic polymerization of N-substituted maleimide. V. A study on the kinetic features of anionic polymerization of N-phenylmaleimide

The kinetic feature of the anionic polymerization of N-PMI was investigated in THF. The polymerization system initiated with lithium tert-butoxide was revealed to be so-called “slow-initiation” system. The rate constant of the initiation reaction, k_i, was obtained to be 4.2 × 10^?3 (L mol^?1 s^?1) at ?72°C. The apparent rate constants of the propagation reaction, k, at ?72°C were individually obtained from each slope of the first-order plots in the later stages of the polymerizations for four different initiator concentrations. Each k is fairly close to that of initiation rate around 10^?3. The propagation reaction was concluded to be dominated by ion-pair mechanism from the analysis of the kinetic data and the results of the addition effects of crown ether and common salt.     

Temperature and pressure effects on the kinetics of the Bromate ion-iodide ion-L-ascorbic acid clock reaction

The kinetics of the bromate ion-iodide ion-L-ascorbic acid clock reaction was investigated as a function of temperature and pressure using stopped-flow techniques. Kinetic results were obtained for the uncatalyzed as well as for the Mo(VI) and V(V) catalyzed reactions. While molybdenum catalyzes the BrO-I^? reaction, vanadium catalyzes the direct oxidation of ascorbic acid by bromate ion. The corresponding rate laws and kinetic parameters are as follows. Uncatalyzed reaction: r₂ = k₂[BrO] [I^?][H⁺]², k₂ = 38.6 ± 2.0 dm⁹ mol^?3 s^?1, ΔH? = 41.3 ± 4.2 kJmol^?1, ΔS? = ?75.9 ± 11.4 Jmol^?1 K^?1, ΔV? = ?14.2 ± 2.9 cm³ mol^?1. Molybdenum-catalyzed reaction: r′₂ = k₂[BrO] [I^?] [H⁺]² + k_Mo[BrO] [I^?] [ H⁺]²[M₀(VI)], k_Mo = (2.9 ± 0.3)10⁶ dm¹² mol^?4 s^?1, ΔH? = 27.2 ± 2.5 kJmol^?1, ΔS? = ?30.1 ± 4.5 Jmol^?1K^?1, ΔV? = 14.2 ± 2.1 cm³ mol^?1. Vanadium-catalyzed reaction: r′₁ = k_V[BrO] [V(V)], k_V = 9.1 ± 0.6 dm³ mol^?1 s^?1, ΔH? = 61.4 ± 5.4 kJmol^?1, ΔS? = ?20.7 ± 3.1 Jmol^?1K^?1, ΔV? = 5.2 ± 1.5 cm³ mol^?1. On the basis of the results, mechanistic details of the BrO-I^? reaction and the catalytic oxidation of ascorbic acid by BrO are elaborated. © 1995 John Wiley & Sons, Inc.     

Studies on the composition and kinetics of chromium(III)-alanine system

Kinetics of the complex formation of chromium(III) with alanine in aqueous medium has been studied at 45, 50, and 55°C, pH 3.3–4.4, and μ = 1 M (KNO₃). Under pseudo first-order conditions the observed rate constant (k_obs) was found to follow the rate equation: Values of the rate parameters (k_an, k, K_IP, and K) were calculated. Activation parameters for anation rate constants, ΔH^≠(k_an) = 25 ± 1 kJ mol^?1, ΔH^≠(k) = 91 ± 3 kJ mol^?1, and ΔS^≠(k_an) = ?244 ± 3 JK^?1 mol^?1, ΔS^≠(k) = ?30 ± 10 JK^?1 mol^?1 are indicative of an (I_a) mechanism for k_an and (I_d) mechanism for k routes (‥substrate Cr(H₂O) is involved in the k route whereas Cr(H₂O)₅OH²⁺ is involved in k′ route). Thermodynamic parameters for ion-pair formation constants are found to be ΔH°(K_IP) = 12 ± 1 kJ mol^?1, ΔH°(K) = ?13 ± 3 kJ mol^?1 and ΔS°(K_IP) = 47 ± 2 JK^?1 mol^?1, and ΔS°(K) = 20 ± 9 JK^?1 mol^?1.     

Chain-length dependent termination in pulsed-laser polymerization, 5. The evaluation of the rate coefficient of bimolecular termination kt for the reference system styrene in bulk at 25°C

Following earlier suggestions the values for the rate coefficient of chain termination k_t in the bulk polymerization of styrene at 25°C were formally calculated (a) from the second moment of the chainlength distribution (CLD) and (b) from the rate equation for laser-initiated pseudostationary polymerization (both expressions originally derived for chain-length independent termination) by inserting the appropriate experimental data including the rate constant of chain propagation k_p. These values were treated as average values, k and k , respectively. They exhibited good mutual agreement, even the predicted gradation (k < k by about 20%) was recovered. The log-log plot of k_t vs. the number-average degree of polymerization of the chains at the moment of their termination yielded exponents b of 0.16–0.18 in the power-law k_t = A · P_n ^−b, A ranging from 2.3 × 10⁸ to 2.7 × 10⁸ L · mol⁻¹ · s⁻¹. These data are only slightly affected if termination is not assumed to occur by recombination only and a small contribution of disproportionation is allowed for.     

Chain-length dependent termination in pulsed-laser polymerization, 6. The evaluation of the rate coefficient of bimolecular termination kt for the reference system methyl methacrylate in bulk at 25°C

The values for the rate coefficient of chain termination k_t in the bulk polymerization of methyl methacrylate at 25°C were formally calculated (i) from the second moment of the chain-length distribution and (ii) from the rate equation for laser-initiated pseudostationary polymerization (both expressions were originally derived for chain-length independent termination) by inserting the appropriate experimental data including the rate constant of chain propagation k_p. These values were treated as average values, k and k , respectively. They exhibited good mutual agreement, even the predicted gradation (k < k by about 20%) was recovered. The log-log plot of k_t vs. the average degree of polymerization of the chains at the moment of their termination v′ yielded exponents b of 0.16–0.17 in the power-law k _t = A · v′^−b, A ranging from 1.1 × 10⁸ to 1.3 × 10⁸ (L · mol⁻¹ · s⁻¹). A 70% contribution of disproportionation to overall termination has been assumed in the calculations.     

Improving the control of styrene polymerization at 60 °C using a dialkylated α‐hydrogenated nitroxide

A new dialkylated α‐hydrogenated linear nitroxide and the corresponding 1‐phenylethyl alkoxyamine were synthesized in two and three steps, respectively. The alkoxyamine was involved in the polymerization of styrene at 60 °C, and the in situ concentration of nitroxide was monitored by electron spin resonance spectroscopy. The enhanced characteristics of these new alkylated alkoxyamine and nitroxide (k = 1.5 × 10^?4 s^?1 and k = 5.7 × 10⁴ L mol^?1 s^?1) yielded a monomer consumption one order of magnitude higher than styrene thermal polymerization. This resulted in well‐defined polystyrenes up to 70,000 g mol^?1 and the observation of a control occurring through the establishment of the radical persistent effect, that is, ln([M]₀/[M]) = t^2/3. Experimentally determined kinetic constants were involved in PREDICI modelings to investigate the influence of temperature and initial alkoxyamine concentration on the kinetics as well as on the livingness and the controlled character of the polymerization. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Variable-Temperature and Variable-Pressure Kinetic and Equilibrium studies of formation and dissociation of [V(H2O)5NCS]2+

The kinetics of formation and dissociation of [V(H₂O)₅NCS]²⁺ have been studied, as a function of excess metal-ion concentration, temperature, and pressure, by the stopped-flow technique. The thermodynamic stability of the complex was also determined spectrophotometrically. The kinetic and equilibrium data were submitted to a combined analysis. The rate constants and activation parameters for the formation (f) and dissociation (r) of the complex are: k/M ^?1 · S^?1 = 126.4, k/s^?1 = 0.82; ΔH /kJ · mol^?1 = 49.1, ΔH/kJ · mol^?1 = 60.6; ΔS/ J·K^?1·mol^?1= ?39.8, ΔSJ·K^?1·mol^?1 = ?43.4; ΔV/cm³·mol^?1 = ?9.4, and ΔV/cm³ · mol^?1 =?17.9. The equilibrium constant for the formation of the monoisothiocynato complex is K²⁹⁸/M ^?1 = 152.9, and the enthalpy and entropy of reaction are ΔH⁰/kJ · mol^?1 = ? 11.4 and ΔS⁰/J. K^?1mol^?1 = +3.6. The reaction volume is ΔV⁰/cm³· mol^?1 = +8.5. The activation parameters for the complex-formation step are similar to those for the water exchange on [V(H₂O)₆]³⁺ obtained previously by NMR techniques. The activation volumes for the two processes are consistent with an associative interchange, I_a, mechanism.     

Inorganic reactions of iodine(III) in acidic solutions and free energy of iodous acid formation

An analysis of the former works devoted to the reactions of I(III) in acidic nonbuffered solutions gives new thermodynamic and kinetic information. At low iodide concentrations, the rate law of the reaction IO + I^? + 2H⁺ ? IO₂H + IOH is k_+B [IO][I^?][H⁺]² – k_?B [IO₂H][IOH] with k_+B = 4.5 × 10³ M^?3s^?1 and k_?B = 240 M^?1s^?1 at 25°C and zero ionic strength. The rate law of the reaction IO₂H + I^? + H⁺ ? 2IOH is k_+C [IO₂H][I^?][H⁺] – k_?C [IOH]² with k_+C = 1.9 × 10¹⁰ M^?2s^?1 and k_?C = 25 M^?1s^?1. These values lead to a Gibbs free energy of IO₂H formation of ?95 kJ mol^?1. The pK_a of iodous acid should be about 6, leading to a Gibbs free energy of IO formation of about ?61 kJ mol^?1. Estimations of the four rate constants at 50°C give, respectively, 1.2 × 10⁴ M^?3s^?1, 590 M^?1s^?1, 2 × 10⁹ M^?2s^?1, and 20 M^?1 s^?1. Mechanisms of these reactions involving the protonation IO₂H + H⁺ ? IO₂H and an explanation of the decrease of the last two rate constants when the temperature increases, are proposed. © 2008 Wiley Periodicals, Inc. Int J Chem Kinet 40: 647–652, 2008     

Magnesium chloride supported high mileage catalysts for olefin polymerization. XII. Polymerization of ethylene

Polymerizations of ethylene by the MgCl₂/ethylbenzoate/p-cresol/AlEt₃ TiCl₄-AlEt₃/methyl-p-toluate (CW-catalyst) have been studied. The initially formed active site concentration, [Ti] has a maximum value of 50% of total titanium at 50°C and lower values at other temperatures. The Ti decays rapidly to Ti sites with conc. ca. 10 mol %/mol Ti. The rate constants for four chain transfer processes have been obtained at 50°C: for transfer with AlEt₃, k = 2.1 × 10^?4 s^?1 and k = 4.8 × 10^?4 s^?1; for transfer with monomer, k = 3.6 × 10^?3 (M s)^?1 and K = 8.3 × 10^?3 (M s)^?1; for β-hydride transfer, k = 7.2 × 10^?4 s^?1 and k = 4.9 × 10^?4 s^?1; and transfer with hydrogen, k = 4.0 × 10^?3 torr^1/2 s^? and k = 5.1 × 10^?3 torr^1/2 s^?1. The rate constants for the termination assisted by hydrogen is k = 1.7 (M^1/2 torr^1/2 S)^?1. If monomer is assisting termination as was observed for propylene polymerization, then k = 7.8 (M^3/2 s)^?1. Values of all the rate constants can be higher or lower at other temperatures. Detailed comparisons were made with the results of propylene polymerizations. There are more than four times as many Ti active sites for ethylene polymerization than there are for stereospecific polymerization of propylene; the difference is more than a factor of two for the Ti sites. Certain rate constants are nearly the same for both monomers while others are markedly different. Some of the differences can be explained by stereoelectronic effects.     

Depolymerization kinetics of di(4‐tert‐butyl cyclohexyl) itaconate and Mark‐Houwink‐Kuhn‐Sakurada parameters of di(4‐tert‐butyl cyclohexyl) itaconate and di‐n‐butyl itaconate

Multipulse pulsed laser polymerization coupled with size exclusion chromatography (MP‐PLP‐SEC) has been employed to study the depropagation kinetics of the sterically demanding 1,1‐disubstituted monomer di(4‐tert‐butylcyclohexyl) itaconate (DBCHI). The effective rate coefficient of propagation, k, was determined for a solution of monomer in anisole at concentrations, c, 0.72 and 0.88 mol L^?1 in the temperature range 0 ≤ T ≤ 70 °C. The resulting Arrhenius plot (i.e., ln k vs. 1/RT) displayed a subtle curvature in the higher temperature regime and was analyzed in the linear part to yield the activation parameters of the forward reaction. In the temperature region where no depropagation was observed (0 ≤ T ≤ 50 °C), the following Arrhenius parameters for k_p were obtained (DBCHI, E_p = 35.5 ± 1.2 kJ mol^?1, ln A_p = 14.8 ± 0.5 L mol^?1 s^?1). In addition, the k data was analyzed in the depropagatation regime for DBCHI, resulting in estimates for the associated entropy (?ΔS = 150 J mol^?1 K^?1) of polymerization. With decreasing monomer concentration and increasing temperature, it is increasingly more difficult to obtain well structured molecular weight distributions. The Mark Houwink Kuhn Sakurada (MHKS) parameters for di‐n‐butyl itaconate (DBI) and DBCHI were determined using a triple detection GPC system incorporating online viscometry and multi‐angle laser light scattering in THF at 40 °C. The MHKS for poly‐DBI and poly‐DBCHI in the molecular weight range 35–256 kDa and 36.5–250 kDa, respectively, were determined to be K_DBI = 24.9 (10³ mL g^?1), α_DBI = 0.58, K_DBCHI = 12.8 (10³ mL g^?1), and α_DBCHI = 0.63. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1931–1943, 2007     

Copper Catalysed Oxygenation of Bis (2-pyridyl) methane and 6-Methyl-bis (2-pyridyl)methane to the Corresponding Ketones

The ligands (L) bis (2-pyridyl) methane (BPM) and 6-methyl-bis (2-pyridyl)methane (MBPM) form the three complexes CuL²⁺, CuL, and Cu₂L₂H with Cu²⁺. Stability constants are log K₁ = 6.23 ± 0.06, log K₂ = 4.83 ± 0.01, and log K (Cu₂L₂H + 2H²⁺ ? 2 CuL²⁺) = ?10.99 ± 0.03 for BPM and 4.56 ± 0.02, 2.64 ± 0.02, and ?11.17 ± 0.03 for MBPM, respectively. In the presence of catalytic amounts of Cu²⁺, the ligands are oxygenated to the corresponding ketones at room temperature and neutral pH. With BPM and 2,4,6-trimethylpyridine (TMP) as the substrate and the buffer base, respectively, the kinetics of the oxygenation can be described by the rate law with k₁ = (5.9 ± 0.2) · 10^?13 mol l^?1 s^?1, k₂ = (4.0 ± 0.6) · 10^?4 mol^?1 ls^?1, k₃ = (1.1 ± 0.1) · 10^?12 mol l^?1 s^?1, and k₄ = (9 ± 2) · 10^?14 mol l^?1 s^?1.     

Syndiospecific polymerization of styrene. II. Monocyclopentadienyltributoxy titanium/methylaluminoxane catalyst

Syndiospecific polymerization of styrene was catalyzed by monocyclopentadienyltributoxy titanium/methylaluminoxane [CpTi (OBu)₃/MAO]. The atactic and syndiotactic polystyrenes were separated by extracting the former with refluxing 2-butanone. The activity and syndiospecificity of the catalyst were affected by changes in catalyst concentration and composition, polymerization temperature, and monomer concentration. Extremely high activity of 5 × 10⁷ g PS (mol Ti mol S h)^?1 with 99% yield of the syndiotactic product were achieved. The concentration of active species, [C^*], has been determined by radiolabeling. The amount of the syndiospecific and nonspecific catalytic species, [C] and [C] respectively, correspond to 79 and 13% of the CpTi(OBu)₃. The rate constants of propagation for C and C at 45°C are 10.8 and 2.0 (M s)^?1, respectively, the corresponding rate constants for chain transfer to MAO are 6.2 × 10^?4 and 4.3 × 10^?4s^?1. There was no deactivation of the catalytic species during a batch polymerization. The rate constant of chain transfer with monomer is 6.7 × 10^?2 (M s)^?1; the spontaneous β-hydride transfer rate constant is 4.7 × 10^?2 s^?1. The polymerization activity and stereospecificity of the catalyst are highest at 45°C, both decreasing with either higher or lower temperature. The stereoregular polymer have broad MW distributions, M?_w/M?_n = 2.8–5.7, and up to three crystalline modifications. The T_m of the s-PS polymerized at 0–90°C decreased from 261.8 to 241°C indicating thermally activated monomer insertion errors. The styrene polymerization behaviors were essentially insensitive to the dielectric constant of the medium.     

Radical-initiated homopolymerization and copolymerization of ethyl α-hydroxymethylacrylate

Ethyl α-hydroxymethylacrylate (EHMA) was synthesized and homopolymerized in bulk and in solution. The poly(EHMA) is readily soluble in alcohol, acetone, tetrahydrofuran, and methylene chloride at room temperature. Intramolecular lactone formation occurred when poly(EHMA) was heated to 180–230°C. The kinetics of EHMA homopolymerization was investigated in ethyl acetate, using α,α′-azobisisobutylonitrile as an initiator. The rate of polymerization R_p was expressed by R_p = k[AIBN]^0.50[EHMA]^1.4 and the overall activation energy was calculated as 71.9 kJ/mol. Kinetic constants for EHMA polymerization were obtained as follows: k_p/k = 0.17L^0.9mol^?0.9s^?0.5; 2fk_d = 1.5 × 10^?5 s^?1. The relative reactivity ratios of EHMA(M₂) copolymerization with styrene (r₁ = 0.472, r₂ = 0.564) in ethyl acetate were obtained. Applying the Q-e scheme led to Q = 0.84 and e = 0.35 for EHMA.     

Kinetic study of the interaction of adenosine 5′‐monophosphate with diaqua (2‐hydrazinopyridine) palladium(II) in aqueous medium

The interaction of the palladium(II) complex [Pd(hzpy)(H₂O)₂]²⁺, where hzpy is 2‐hydrazinopyridine, with purine nucleoside adenosine 5′‐monophosphate (5′‐AMP) was studied kinetically under pseudo‐first‐order conditions, using stopped‐flow techniques. The reaction was found to take place in two consecutive reaction steps, which are both dependent on the actual 5′‐AMP concentration. The activation parameters for the two reaction steps, i.e. ΔH = 32 ±2 kJ mol^?1, ΔS = ?168 ±7 J K^?1 mol^?1, and ΔH = 28 ± 1 kJ mol^?1, ΔS = ?126 ± 5 J K^?1 mol^?1, respectively, were evaluated and suggested an associative mode of activation for both substitution processes. The stability constants and the associated speciation diagram of the complexes were also determined potentiometrically. The isolated solid complex was characterized by C, H, and N elemental analyses, IR, magnetic, and molar conductance measurements. © 2009 Wiley Periodicals, Inc. Int J Chem Kinet 42: 132–142, 2010     

The activation energy of the skeletal isomerization in the radical cations of toluene and cycloheptatriene by mass spectrometry of their 2-phenylethyl derivatives

The Unimolecular mass spectrometric fragmentations of the molecular ions of 1,3-diphenylpropane, 1-(7-cycloheptatrienyl)-2-phenylethane and the 1-phenyl-2-tolylethanes and their [d₅]phenyl analogues have been investigated by metastable ion techniques and measurements of ionization and appearance energies. By comparing the formation of [C₇H₇]⁺, [C₇H₈]⁺?, [C₈H₈]⁺? and [C₈H₉]⁺ it is shown that the molecular ions of the four diaryl isomers do not undergo ring expansion reactions of the aromatic nuclei prior to these fragmentations. Conversely, the molecular ions of the cycloheptatrienyl isomer suffer in part a contraction of the 7-membered ring. From these results and from the measured ionization and appearance energies lower limits to the activation energies of these skeletal isomerizations have been estimated yielding E > 33±5 kcal mol^?1 formonoalkylbenzene, E > 20 2±5 kc mol^?1 for 7-alkylcycloheptatriene and E > 40±5 kcal mol^?1 for dialkylvbenzene positive radical ions. Upper limits can be deduced from literature evidence yielding E < 45 kcal mol^?1 for monoalkylbenzene and E < 53 kcal 4mol^?1 for dialkylbenzene positive radical ions. The activation energy thus estimated for monoalkylbenzene is in excellent agreement with the recently calculated value(s) for the toluene ion.     

Kinetic Studies on the Reaction of Sodium Hexacyanoferrate（ll） Complex with Peroxydisulfate Anion

The oxidation of Na₄Fe(CN)₆ complex by S₂O anion was found to follow an outer‐sphere electron transfer mechanism. We firstly carried out the reaction at pH=1. The specific rate constants of the reaction, k_ox, are (8.1±0.07)×10^?2 and (4.3±0.1)×10^?2 mol^?1·L·s^?1 at μ=1.0 mol·L^?1 NaClO₄, T=298 K for pH=1 (0.1 mol·L^?1 HCl0₄) and 8, respectively. The activation parameters, obtained by measuring the rate constants of oxidation 283–303 K, were ΔH^≠=(69.0±5.6) kJ·mol^?1, ΔS^≠=(?0.34±0.041)×10² J·mol^?1·K^?1 at pH=l and ΔH^≠=(41.3±5.5) kJ·mol^?1, ΔS^≠=(?1.27±0.33)×10² J·mol^?1·K^?1 at pH=8, respectively. The cyclic voltammetry of Fe(CN) shows that the oxidation is a one‐electron reversible redox process with E_1/2 values of 0.55 and 0.46 V vs. normal hydrogen electrode at μ=1.0 mol·L^?1 LiClO₄, for pH=1 and pH=8 (Tris). respectively. The kinetic results were discussed on the basis of Marcus theory.     

SP–PLP–EPR Investigations into the Chain‐Length‐Dependent Termination of Methyl Methacrylate Bulk Polymerization

Termination kinetics of methyl methacrylate (MMA) bulk polymerization has been studied via the single pulsed laser polymerization–electron paramagnetic resonance method. MMA‐d₈ has been investigated to enhance the signal‐to‐noise quality of microsecond time‐resolved measurement of radical concentration. Chain‐length‐dependent termination rate coefficients of radicals of identical size, k, are reported for 5–70 °C and up to i = 100. k decreases according to the power‐law expression . At 5 °C, k_t for two MMA radicals of chain‐length unity is k = (5.8 ± 1.3) · 10⁸ L · mol⁻¹ · s⁻¹. The associated activation energy and power‐law exponent are: E_A(k) ≈ 9 ± 2 kJ · mol⁻¹ and α ≈ 0.63 ± 0.15, respectively.

     

Stability of Complex Metal Bromides in the gas phase and in toluene

The equilibrium constants of the reactions MBr₂(s) + Al₂Br₆(sln) ? MAl₂Br₈(sln) M = Cr, Mn, Co, Ni, Zn, Cd have been measured at 298 K in toluene. Ni: 0.017 ± 0.0024, Co: 0.54 ± 0.07, Zn: 1.5 ± 0.2, Mn: 2.1 ± 0, 7, Cr: 2.2 ± 1, Cd: 7 ± 5. They are compared with literature values of the equilibrium constants of analogous reactions in the gas phase MX₂(s) + Al₂X₆(g) ? MAl₂X₈(g), X = Cl, Br. For CoAl₂Br₈(sln) the temperature dependence of the equilibrium constant yielded Δ_fH = ?9.4 ± 1 kJ mol^?1 and Δ_fS = ?39.5 ± 3 J mol^?1 K^?1 while literature values for CoAl₂Br₈(g) are Δ_fH = 42.4 ± 2 kJ mol^?1 and Δ_fS = 42.9 ± 2 J mol^?1 K^?1. The solubility of Al₂Br₆ in toluene as well as its enthalpy of dissolution have been measured in order to evaluate ΔH° and ΔS° of the solvation of Al₂Br₆(g) and CoAl₂Br₈(g) in toluene by a thermodynamic cycle. Solvation of Al₂Br₆(g): ΔH = ?72.7 ± 1 kJ mol^?1, ΔS = ?139.6 ± 4 J mol^?1 K^?1, solvation of CoAl₂Br₈(g): ΔH = ?124.5 ± 4kJ mol^?1, ΔS = ?222 ± 9J mol^?1 K^?1. Thus, CoAl₂Br₈ interacts more strongly with the solvent toluene than Al₂Br₆ does.