Liquid chromatography-electrospray mass spectrometry of multicomponent peptide mixtures. Characterization of a mixture from the synthesis of the hormone goserelin

In order to separate and characterize the target peptide and the side-product peptide compounds of a synthesis mixture of the peptide hormone goserelin, liquid chromatography coupled to high-flow electrospray ionization mass spectrometry (LC-ES-MS) has been used. Goserelin is an important drug with recognized therapeutical application for palliative treatment of prostatic and breast carcinomas. Stepwise solid-phase peptide synthesis commonly results in unwanted side-products associated with incomplete peptide chains. Consequently, this procedure requires extensive purification and characterization of the final synthesis mixture. The method of linear solvation energy relationships has been applied to optimize the proportion of organic modifier of the mobile phase used in the established LC method. On the other hand, ES-MS has allowed rapid and reliable identification of the target peptide and the other impurities present in the goserelin synthesis products.     

Separation and characterization of complex crude mixtures produced in the synthesis of therapeutic peptide hormones by liquid chromatography coupled to electrospray mass spectrometry (LC-ES-MS)

Native peptides and peptidomimetics can be synthesized in a routine way by rapid and efficient procedures. However, the final products always result in complex mixtures, in which the target peptide is contaminated with undesired side products and other impurities. Thus, it is imperative to develop analytical methods for the evaluation of the target peptide’s purity in order to obtain an effective, safe and legal pharmaceutical product. LC-ES-MS is used here in order to separate and characterize the side-products associated with several synthetic hormones with therapeutic interest: carbetocin, eledoisin, leuprolide, goserelin and triptorelin. General directions for LC-ES-MS analysis of the synthetic peptide mixtures are established. Mass information obtained offers a significant advantage for the purity assessment of therapeutic hormones and gives a key tool to enhance their process of synthesis.     

Investigation of synthetic peptide hormones by liquid chromatography coupled to pneumatically assisted electrospray ionization mass spectrometry: analysis of a synthesis crude of peptide triptorelin

Triptorelin, a synthetic peptide hormone used in the treatment of prostate cancer by means of reduction in the action of male hormone testosterone, is studied here. The synthetic procedure commonly results in unwanted side products that require extensive purification and characterization of the synthesis mixture. The chromatographic separation of triptorelin from the crude mixture was developed by applying the linear solvation energy relationship (LSER) methodology previously developed, to optimize the composition of the mobile phase in order to avoid lengthy empirical optimization procedures. Electrospray ionization mass spectrometry coupled to liquid chromatography (LC/ES-MS) was used to obtain reliable information on the inevitable side products. The knowledge of the identity of these impurities allows fast optimization of the synthetic procedure and also the therapeutic use of triptorelin peptide hormone.     

Liquid chromatography-mass spectrometry approach for the characterization and purification of crude synthetic peptide hormones

In this study, conditions for the optimal separation by LC-UV and characterisation by LC-ES-MS of crude mixtures generated during SPPS of several peptide hormones are compiled. The linear solvation energy relationship (LSER) methodology has been used to predict the retention of the target peptides and their side products and then to develop a separation LC methodology with applicability on both the analytical and preparative scale. Identification of these side products by LC-ES-MS analysis has been made on the basis of their calculated molecular masses. This method may be regarded as a key tool for the optimisation of the synthetic procedures and for complying with regulatory agencies' requirements before commercialisation of a safe and effective peptide-based pharmaceutical drug.Awarded a prize as outstanding poster on the occasion of Jornadas de Análisis Instrumental (JAI), November 26 to 29, 2002, Barcelona, Spain     

Hot or not—the influence of elevated temperature and microwave irradiation on the solid phase synthesis of an affibody

Despite the advances of solid phase peptide synthesis (SPPS) the synthesis of long peptides is still challenging. Microwave irradiation and conventional heating are considered to improve the efficiency of SPPS. It has been shown that conventional heating and heating by microwave irradiation improves the efficiency of solid phase synthesis of peptides that are prone to aggregation as compared to the synthesis at room temperature. In this Letter, the influence of elevated temperature and microwave irradiation on the homogeneity of the synthesis product of a 58-mer peptide affibody has been compared. A detailed analysis by high resolution HPLC and LC-MS mass spectrometry using a high-mass resolution Orbitrap Exactive mass spectrometer was performed. This study revealed that neither thermal heating nor microwave heating improves the yield and purity of the crude product as compared to the synthesis at room temperature. In contrast, the formation of undesirable side products rather increased by microwave irradiation. These results indicate that neither heating nor microwave enhancement of solid phase synthesis does allow a significant improvement of peptide sequences with a low aggregation potential.     

On‐line two‐dimensional LC: A rapid and efficient method for the determination of enantiomeric excess in reaction mixtures

A novel LC‐based method for the determination of enantiomeric excess (ee) in a sample mixture has been developed by employing on‐line 2D LC. The orthogonal separation system is composed of an NH₂ column as the first dimension to elute the target chiral compound from the crude mixture and a chiral column as the second dimension to determine the ee of the target chiral product. A series of crude mixtures from asymmetric reactions have been directly analyzed without prepurification. Good reproducibility (intra‐ and interday precisions were all under 1.33%) and good accuracy (deviations from ee values determined by 1D HPLC were all <1.03%) have been obtained. Compared with the traditional method for the determination of ee, on‐line 2D HPLC can be used in real time and holds great potential in the time‐saving determination of ee in asymmetric synthesis.     

液相色谱-质谱联用技术分析固相合成胸腺五肽及其副产物

利用反相高效液相色谱(RP-HPLC)与电喷雾质谱(ESI-MS/MS)联用技术,分析用芴甲氧羰基(Fmoc)固相合成方法在WANG树脂上手工合成的胸腺五肽(H2N-Arg-Lys-Asp-Val-Tyr-COOH)粗产物,RP-HPLC结果显示:合成粗产物含有一个主要成分,三个次要成分和多个微量成分;与之联用的电喷雾质谱同步得出相应的某些信息,可对各成分的结构进行分析。结果证明,粗产物中的主成分即为目标五肽,另外几个主要副产物为五肽合成过程中去保护未完全的副产物。     

Preparative isolation of novel antioxidant flavonoids of alfalfa by stop-and-go counter-current chromatography and following on-line liquid chromatography desalination

In this work, we have established a new stop-and-go two-dimensional chromatography coupling of counter-current chromatography and liquid chromatography (2D CCC × LC) for the preparative separation of two novel antioxidant flavonoids from the extract of alfalfa (Medicago sativa L.). The CCC column has been used as the first dimension to purify the target flavonoids using a solvent system of isopropanol and 20% sodium chloride aqueous solution (1:1, v/v) with the stop-and-go flow technique, and the LC column packed with macroporous resin has been employed as the second dimension for on-line absorption, desalination and desorption of the targeting effluents purified from the first CCC dimension. As a result, two novel flavonoids, 6,8-dihydroxy-flavone-7-O-β-D-glucuronide (15.3 mg) and 6-methoxy-8-hydroxy-flavone-7-O-β-D-glucuronide (13.7 mg), have been isolated from 126.8 mg of crude sample pre-enriched by macroporous resin column. Their structures have been identified by electrospray ionization mass spectrometry (ESI-MS), electrospray ionization time-of-flight mass spectrometry (ESI-TOF-MS) and one- and two-dimensional nuclear magnetic resonance spectra (1D and 2D NMR). Further antioxidant assays showed that the first component possess a strong antioxidant activity. All the results demonstrated that the stop-and-go 2D CCC × LC method is very efficient for the separation of flavonoids of alfalfa and it can also be applied to isolate other comprehensive multi-component natural products.     

胡蜂蜂毒肽的固相合成

采用Fmoc固相合成策略,合成了胡蜂蜂毒肽(COOH-Ile-Asn-Leu-Lys-Ala-Leu-Ala-Ala-Leu-Ala-Lys-Lys-Ile-Leu-NH₂)。以Wang树脂为载体,HBTU-HOBt为缩合剂,按照其氨基酸序列依次缩合,最终用切割试剂将其从树脂上切割下来,得到粗肽,经RP-HPLC纯化得到目标肽,纯度97.6%。经HR-MS（EI）分析,确定产物为胡蜂蜂毒肽。     

Automated modular preparative HPLC-MS purification laboratory with enhanced efficiency

Automated parallel synthesis as tool to increase productivity in chemical synthesis is well-established. However, even more time-consuming than the synthesis process is the following purification of the resulting crude products. To enhance efficiency of the lead optimization process at Bayer CropScience, a high-throughput HPLC/MS-laboratory for the purification of up to 48 crude products per day in the range of 200-400 mg each in one injection per sample has been set up. The use of Covaris technology for HPLC sample preparation, automated aliquotation during fractionation, and a novel evaporation process by combination with freeze-drying are new key technologies applied successfully for the first time in this purification unit facilitating to achieve the targeted efficiency. The whole process is supported by a specially designed IT-landscape covering each step of the workflow. Both the technical instruments used within the laboratory and the workflow and IT platform are described in this article.     

Peptide mapping with liquid chromatography using a basic mobile phase

A new peptide mapping with liquid chromatography (LC) using an ammonia-containing basic mobile phase was reported. As compared with a method under a traditional acidic condition with a mobile phase containing trifluoroacetic acid (TFA) or formic acid (FA), the new method exhibited excellent overall performance: it was advantageous over the TFA method in terms of the ultraviolet (UV) and mass spectrometry (MS) sensitivities and the sequence coverage for a tryptic map; it was superior to the FA method in terms of the UV sensitivity, the sequence coverage and the separation capacity. Due to a significant difference in the chromatographic selectivity, several important peptide mapping applications that were sometimes difficult to be conducted previously could now be carried out using the new method. For example, the baseline separation of peptides from the corresponding deamidated products could be achieved with confidence using the new method, a critical pre-requisite for definitive identification and quantification of the deamidation products with LC/MS. No on-column deamidation was observed with the conditions used for the separation. Complementary and confirmative information about a protein could be obtained by running its proteolytic digest under both the basic and acidic conditions.     

Solid-phase microextraction-gas chromatography-mass spectrometry of biologically active substances in water samples

High-flow pneumatically assisted electrospray ionization mass spectrometry (ESI-MS) has been extensively used for the characterization and determination of peptides and peptide hormones available for biomedical research and therapeutic applications. The aim of this study was to optimize a method of characterization and determination of a mixture of peptide hormones with therapeutic interest by liquid chromatography (LC) coupled to ESI-MS. In this work the linear solvation energy relationship methodology was used in order to optimize the mobile phase to be used in the LC separation of the peptide hormone series and the operational parameters of the source and analyzer of ESI were also optimized to obtain the best signal stability and the highest sensitivity. To validate the proposed method for peptide hormone analysis, quality parameters were determined and satisfactory results were obtained. Likewise, the method detection limit was picomole level for most of the peptides employing selected-ion monitoring of the [M+nH]n+ ions.     

微波促进催产素和赖氨加压素环肽的固相合成

以Rink Amide-MBHA树脂为载体, 采用Fmoc/tBu正交保护固相合成策略, 运用微波照射促进, 先快速高效地合成得到载有催产素或赖氨加压素还原型多肽的树脂, 再将连接在树脂上的各还原型多肽分别在微波促进条件下和常温条件下环合形成二硫键制得环肽, 最后用Reagent K试剂将环肽从树脂上裂解下来得到目标多肽的粗品. 利用HPLC法测定不同固相环合条件下得到的多肽粗品纯度, 结果显示经微波促进固相环合得到的多肽粗品纯度明显高于常温条件下得到的多肽粗品纯度. 粗品最后经过反相制备高效液相系统纯化并冻干得到目标多肽纯品, 通过电喷雾质谱法测定了制得的还原型多肽及相应环肽的分子量, 验证了它们的结构.     

Diagnostic protein discovery using liquid chromatography/mass spectrometry for proteolytic peptide targeting

A peptide targeting method has been developed for diagnostic protein discovery, which combines proteolytic digestion of fractionated plasma proteins and liquid chromatography coupled to electrospray time-of-flight mass spectrometry (LC/ESI-TOFMS) profiling. Proteolysis prior to profiling overcomes molecular weight limitations and compensates for the poor sensitivity of matrix-assisted laser desorption/ionization (MALDI) protein profiling. LC/MS increases the peak capacity compared to crude fractionation techniques or single sample MALDI analysis. Differentially expressed peptides are targeted in the mass chromatograms using bioinformatic techniques and subsequently sequenced with MALDI tandem MS. In a model study comparing pancreatic cancer patients to controls, 74% of the peptide targets were successfully sequenced. This profiling method was superior to previous experiments using single sample MALDI analysis for protein profiling or proteolytic peptide profiling, because more potential protein markers were identified.     

Separation, identification and quantification of riboflavin and its photoproducts in blood products using high-performance liquid chromatography with fluorescence detection: a method to support pathogen reduction technology

A medical device using riboflavin (RB) and light is being developed for the reduction of pathogens in platelet concentrates (MIRASOL pathogen reduction technology [PRT]). A high-performance liquid chromatography (HPLC) method for the quantification of RB and its main photoproduct, lumichrome (LC) in blood components has been developed and validated. In addition, the same method has been used to identify and quantify the presence of additional photoproducts-catabolites of RB. Levels of these agents before and after treatment as well as endogenous levels present in normal donor blood are reported using this analytical technique. The method allows for quantitative and qualitative analysis of RB and LC in blood components using HPLC-fluorescence detection, a Zorbax SB-CN (stable bond cyano) column and a methanol-water mobile phase. Quantitation and qualitative analysis of additional photoproducts of RB was also performed, but the method has not been validated for these other components. The method described has passed an 8 day validation and has been found to be adequate for its intended use. The range of the method for RB is 0.016-1.500 microM and for LC is 0.060-1.500 microM. The method detection limit for RB is 0.0006 microM and for LC is 0.012 microM. The acceptance criteria for repeatability were met; the relative standard deviation for RB was 0.64% and for LC was 0.76%. The acceptance criteria for bias were met with a 97% average recovery for RB and a 102% recovery for LC. Samples were centrifuged and diluted 1:50 with 0.9% saline before analysis. No protein precipitation or extraction was required. A mass balance of approximately 93.4-94.4% was achieved after exposure of products to UV light in the intended pathogen reduction treatment method. The method permitted the identification of photoproducts in blood that were both naturally occurring and produced after photolysis of blood samples treated with the PRT process. The identity of these photoproducts has been established using HPLC Tandem Mass Spectrometry (MS/MS) and UV spectroscopic methods and has been correlated with known metabolites and catabolites of RB. HPLC with fluorescence detection using a reverse phase cyano-column allows for accurate separation, identification and quantification of both RB and LC in blood products without the need for solvent extraction or protein precipitation. Additional photoproducts could also be identified and quantified using this method. The presence of these agents in normal, untreated blood suggests that their presence in blood is ubiquitous.     

LC/MS guided isolation of alkaloids from lotus leaves by pH-zone-refining counter-current chromatography

The traditional methods used in natural product separation primarily target the major components and the minor components may thus be lost during the separation procedure. Consequently, it's necessary to develop efficient methods for the preparative separation and purification of relatively minor bioactive components. In this paper, a LC/MS method was applied to guide the separation of crude extract of lotus (Nelumbo nucifera Gaertn.) leaves whereby a minor component was identified in the LC/MS analysis. Afterwards, an optimized pH-zone-refining CCC method was performed to isolate this product, identified as N-demethylarmepavine. The separation procedure was carried out with a biphasic solvent system composed of hexane-ethyl acetate-methyl alcohol-water (1:6:1:6, v/v) with triethylamine (10 mM) added to the upper organic phase as a retainer and hydrochloric acid (5 mM) to the aqueous mobile phase eluent. Two structurally similar compounds--nuciferine and roemerine--were also obtained from the crude lotus leaves extract. In total 500 mg of crude extract furnished 7.4 mg of N-demethylarmepavine, 45.3 mg of nuciferine and 26.6 mg of roemerine with purities of 90%, 92% and 96%, respectively. Their structures were further identified by HPLC/ESI-MSn, FTICR/MS and the comparison with reference compounds.     

N-Nosyl-α-amino acids in solution phase peptide synthesis

A highly efficient and practical synthesis of peptides in solution phase has been developed. The procedure is based on the use of p-nitrobenzenesulfonyl (nosyl) group for the protection of the amino function of α-amino acids. Every step of the procedure, protection of the amino function by the nosyl group, formation of the peptide bond, and removal of the sulfonamide group, is characterized by high yields and excellent purity of the final products. The described strategy allows the preparation of short peptide sequences keeping the chiral integrity of amino acid precursors. Compatibility of nosyl group with the side-chain protecting groups used in Fmoc-based strategy is demonstrated. The method here presented is an alternative strategy that could provide advantages for future peptide synthesis.     

TTT活泼酰胺法在固相肽合成中的应用——促生长激素释放肽的合成及其生物活性

通过合成促生长激素释放肽,对四氢噻唑-2-硫酮(TTT)活泼酰胺法在固相肽合成中的应用进行了研究。实验结果表明,TTT活泼酰胺同载体上的氨基组分的缩合反应速度很大,每步缩合反应的产率很高(>99.3％),最终产品的纯度也很令人满意。此外,还报道了合成肽的生物活性。     

Automatic mass spectrometry method development for drug discovery: application in metabolic stability assays

High-throughput metabolic screening has been requested routinely to keep pace with high-throughput organic synthesis. Liquid chromatography/tandem mass spectrometry (LC/MS/MS) with a fast gradient has become the method of choice for the task due to its sensitivity and selectivity. We have developed an automated system that consists of a robotic system for in vitro incubation and a commercially available software package for automatic MS/MS method development. A short, generic LC gradient and MS conditions that are applicable to most compounds have been developed to minimize the method development time and data analysis. This system has been used to support a number of in vitro screening assays in early drug discovery phase including microsomal stability and protein binding.     

新型包覆Pd纳米粒子液相色谱-串联质谱法用于鉴定沙特阿拉伯原油中的含氧化合物(英文)

Saudi Arabian crude oil is a super complex mixture and,up to now,there has been little research into its heteroatom-containing compounds.First,oxygenated compounds(OCs)were isolated from Saudi Arabian oil using a Pd nanoparticle exchange complex,which formed between the nano-Pds and the oxygenated ligands.Normally,polycyclic aromatic sulphur heterocycles(S-PAHs)are separated from petroleum oil via the same method.The obtained results reveal that all the OC formulations with S-PAHs can be separated from the pre-isolated aromatic fraction of crude oil via this approach.S-PAHs are mixtures of benzothiophene and dibenzothiophene congeners.The isolated OCs are composed mainly of hydroxyl compounds.The liquid chromatography(LC)/electrospray ionization(ESI)in positive ion mode ESI(+)/tandem mass spectrometry(MS/MS)technique was used to assign the molecular weight distribution and identify the isolated OCs.The LC/ESI(+)-MS/MS technique differentiates S-PAHs and OCs using protonated ions.Thus,LC/ESI(+)-MS/MS can be used to assign molecular weight distributions for both the groups as a single mixture.MS/MS in precursor ion mode was used for the immediate identification of the target S or O analytes.