Photoluminescence studies of red-emitting NaEu(WO4)2 as a near-UV or blue convertible phosphor

Sodium europium double tungstate [NaEu(WO₄)₂] phosphor was prepared by the solid-state reaction method. Its crystal structure, photoluminescence properties and thermal quenching characteristics were investigated aiming at the potential application in the field of white light-emitting diodes (LEDs). The influences of Sm doping on the photoluminescence properties of this phosphor were also studied. It is found that this phosphor can be effectively excited by 394 or 464 nm light, which nicely match the output wavelengths of near-ultraviolet (UV) or blue LED chips. Under 394 or 464 nm light excitation, this phosphor exhibits stronger emission intensity than the Y₂O₂S:Eu³⁺ or Eu²⁺-activated sulfide phosphor. The introduction of Sm³⁺ ions can broaden the excitation peaks at 394 and 464 nm of the NaEu(WO₄)₂ phosphor and significantly enhance its relative luminance under 400 and 460 nm LEDs excitation. Furthermore, the relative luminance of NaEu(WO₄)₂ phosphor shows a superior thermal stability compared with the commercially used sulfide or oxysulfide phosphor, and make it a promising red phosphor for solid-state lighting devices based on near-UV or blue LED chips.     

Effect of local environment and Sm-codoping on the luminescence properties in the Eu-doped potassium tungstate phosphor for white LEDS

The luminescence properties of Eu³⁺- and Sm³⁺-doped potassium tungstate phosphors were investigated. The K_4−3(x+y) (WO₄)₂:Eu_x³⁺,Sm_y³⁺ phosphor was produced by solid-state reactions, followed by re-firing with a flux. The phosphor showed a strong absorption in the near-UV to green region due to 4f-4f electron transitions of the Eu³⁺ and Sm³⁺ ions, generating a red emission. The excitation spectrum could be adjusted by Sm³⁺-codoping. A small amount of Sm³⁺, acting as a sensitizer, increased the energy absorption peak at 405 nm. The crystal structure and local environment around the Eu³⁺ ions were determined using the Rietveld method. The crystal structure of this phosphor was determined to be monoclinic with a space group of C2/c. The small Eu-0 distance in the crystal led to high energy-level splitting at the ⁵D₀→⁷F₂ transition of the Eu³⁺ ions, resulting in more emission peaks.     

Luminescent properties of Mg3Ca3(PO4)4: Eu2+ blue-emitting phosphor for white light emitting diodes

A blue-emitting phosphor, Eu²⁺-activated Mg₃Ca₃(PO₄)₄ phosphor was synthesized by conventional solid-state reaction. X-ray powder diffraction (XRD) analysis confirmed the phase formation. Photoluminescence (PL) results showed that Mg₃Ca₃(PO₄)₄: Eu²⁺ could be efficiently excited by UV–visible light from 250 to 430 nm, which matched well with the emission wavelengths of near-UV and UV LED chips. The effects of the doped-Eu²⁺ concentration in Mg₃Ca₃(PO₄)₄: Eu²⁺ on the PL were also investigated. The result reveals that Mg₃Ca₃(PO₄)₄: Eu²⁺ is a potential blue-emitting phosphor for white LEDs.     

Eu2+激活的Ca3SiO5绿色荧光粉的制备和发光特性研究

研究了Eu²⁺激活的绿色发光材料Ca₃SiO₅的制备条件和发光性质. Eu²⁺中心形成主峰值为501 nm和次峰值为570 nm的特征宽带，两峰值叠加形成发射峰值为502nm的绿色发射光谱带. 利用这些光谱结果和Van Uitert 经验公式，确认Ca₃SiO₅:Eu²⁺中存在两种性质有差异的Eu²⁺发光中心，它们分别占据基质中八配位的Ca²⁺(Ⅰ)格位和四配位的Ca²⁺(Ⅱ)格位. 其激发光谱分布在250—450 nm的波长范围，峰值位于375 nm处，可以被InGaN管芯产生的350—410 nm辐射有效激发. 关键词： 发光 荧光粉 绿色荧光粉 3SiO₅')" href="#">Ca₃SiO₅ 2+')" href="#">Eu²⁺     

Thermally stable luminescence of blue LiSrPO4:Eu2+ phosphor for near-UV light-emitting diodes

Blue phosphor, LiSrPO₄:Eu²⁺, was prepared by solid-state reaction method under a weak reductive atmosphere and investigated by means of photoluminescence, concentration quenching process, and temperature dependence of luminescence. These results show that LiSrPO₄:Eu²⁺ can be efficiently excited by the UV-visible light of 250–440 nm and exhibits bright blue emission. Furthermore, Eu²⁺-doped LiSrPO₄ phosphor shows high thermally stable luminescence comparable to commercial phosphor BaMgAl₁₀O₁₇:Eu²⁺ (BAM). Two bright blue LEDs were fabricated by incorporating an InGaN-based near-UV chip with the obtained phosphor LiSrPO₄:Eu²⁺ and BAM, respectively. Their luminescence properties were compared based on different forward-bias currents. All the characteristics suggest that LiSrPO₄:Eu²⁺ is a good blue phosphor candidate for creating white light in phosphor-conversion white LEDs.     

KBaPO4:Ln (Ln=Eu, Tb, Sm) phosphors for UV excitable white light-emitting diodes

This letter reports the novel three emission bands based on phosphate host matrix, KBaPO₄ doped with Eu²⁺, Tb³⁺, and Sm³⁺ for white light-emitting diodes (LEDs). The phosphors were synthesized by solid-state reaction and thermal stability was elucidated by measuring photoluminescence at higher temperatures. Eu²⁺-doped KBaPO₄ phosphor emits blue luminescence with a peak wavelength at 420 nm under maximum near-ultraviolet excitation of 360 nm. Tb³⁺-doped KBaPO₄ phosphor emits green luminescence with a peak wavelength at 540 nm under maximum near-ultraviolet excitation of 370 nm. Sm³⁺-doped KBaPO₄ phosphor emits orange-red luminescence with a peak wavelength at 594 nm under maximum near-ultraviolet excitation of 400 nm. The thermal stabilities of KBaPO₄:Ln (Ln=Eu²⁺, Tb³⁺, Sm³⁺), in comparison to commercially available YAG:Ce³⁺ phosphor were found to be higher in a wide temperature range of 25-300 °C.     

Synthesis and photoluminescence characteristics of (Sr, Ca)3B2O6:Eu for application in white light-emitting diodes

A series of yellow-green (Sr, Ca)₃B₂O₆:Eu phosphors have been synthesized using precursors prepared via a facile sol-gel route. The solid-solution phases crystallized to materials with the formula of Sr_3−x−yCa_xEu_yB₂O₆ with varied Ca²⁺ and Eu²⁺ contents. The emission peak centered at 540 nm under near-UV excitation exhibited a broad-band distribution in the range of 450-650 nm. The dependences of the luminescence intensity on the contents of Ca²⁺ substitution and Eu²⁺ dopant were also investigated. The composition in the host lattice sensitively affected the chromaticity index. Sr_1.21Ca_1.7Eu_0.09B₂O₆ (SCB:0.09Eu) was shown to possess the highest intensity and broadest emission band. Calcining temperature was shown to greatly influence the luminescent properties of SCB:0.09Eu. It is concluded that SCB:0.09Eu can be used as an efficient yellow-green phosphor for white light-emitting diodes (white LEDs) applications.     

Preparation of Sm3+–Eu3+ coactivating red-emitting phosphors and improvement of their luminescent properties by charge compensation

By charge compensating, a series of red-emitting phosphors Ca_0.54Sr_0.16Ca_0.54Sr_0.31Eu_0.08Sm_0.02(MoO₄)_0.6(WO₄)_0.4 were synthesized. Two approaches to charge compensation were used: (a) 2Ca²⁺/Sr²⁺→Eu ³⁺/Sm³⁺+M ⁺, where M⁺ is a monovalent cation like Li⁺, Na⁺ or K⁺; (b) Ca²⁺/Sr²⁺→Eu ³⁺/Sm³⁺+N ^?, where N⁺ is a monovalent anion like F^?, Cl^?, Br^?, or I^?. One red LED was made by combining the phosphor and 390–405 nm emitting LED chip under 20 mA forward-bias current, the color purity, chromaticity coordinates and the luminous intensity of which were 99.5%, x=0.66, y=0.33, 5600 mcd, respectively.     

Luminescence properties and energy transfer in Eu2+, Mn2+ codoped Na(Sr,Ba)PO4 phosphor

Eu²⁺ and Mn²⁺ singly doped and codoped Na(Sr,Ba)PO₄ phosphors were synthesized, and their luminescent properties were investigated. A broad blue emission and a broad orange emission band were observed in Na(Sr,Ba)PO₄:Eu²⁺, Mn²⁺ phosphor. The resonant-type energy transfer from Eu²⁺ to Mn²⁺ was demonstrated, and the energy transfer efficiency was also calculated according to their emission spectra. Based on the principle of energy transfer, the emission intensity ration of Eu²⁺ and Mn²⁺ could be appropriately tuned by adjusting the contents of activators. Due to the strong absorption in the 250–400 nm range, Na(Sr,Ba)PO₄:Eu²⁺, Mn²⁺ phosphor could be used as a potential candidate for near-UV white light-emitting diodes (LEDs).     

Green Eu-doped Ba3Si6O12N2 phosphor for white light-emitting diodes: Synthesis, characterization and theoretical simulation

The Eu²⁺-doped Ba₃Si₆O₁₂N₂ green phosphor (Eu_xBa_3−xSi₆O₁₂N₂) was synthesized by a conventional solid state reaction method. It could be efficiently excited by UV-blue light (250-470 nm) and shows a single intense broadband emission (480-580 nm). The phosphor has a concentration quenching effect at x=0.20 and a systematic red-shift in emission wavelength with increasing Eu²⁺ concentration. High quantum efficiency and suitable excitation range make it match well with the emission of near-UV LEDs or blue LEDs. First-principles calculations indicate that Ba₃Si₆O₁₂N₂:Eu²⁺ phosphor exhibits a direct band gap, and low band energy dispersion, leading to a high luminescence intensity. The origin of the experimental absorption peaks is clearly identified based on the analysis of the density of states (DOS) and absorption spectra. The photoluminescence properties are related to the transition between 4f levels of Eu and 5d levels of both Eu and Ba atoms. The 5d energy level of Ba plays an important role in the photoluminescence of Ba₃Si₆O₁₂N₂:Eu²⁺ phosphor. The high quantum efficiency and long-wavelength excitation are mainly attributed to the existence of Ba atoms. Our results give a new explanation of photoluminescence properties and could direct future designation of novel phosphors for white light LED.     

Orange emissive Sr3Al2O5Cl2:Eu2+ phosphor for warm-white light-emitting diodes

Orange-emitting Sr₃Al₂O₅Cl₂:Eu²⁺ phosphors were synthesized by a high-temperature solid-state reaction. The excitation spectrum shows a broad band from the UV region to the blue region. The emission spectrum shows strong orange emission peaking at 610 nm, attributed to the d–f transition of the Eu²⁺ ion. By combining the Sr₃Al₂O₅Cl₂:Eu²⁺ phosphor with 420 nm and 460 nm chips, three white light-emitting diodes (LEDs) were fabricated. The warm-white LEDs show color rendering indexes of 76, 66 and 90 with color temperatures of 2447, 3546 and 4300 K, respectively. This new phosphor exhibits the potential to act as a single host doped with Eu²⁺ phosphor for UV or blue chip excited white LEDs.     

用于白光LED的单一基质白光荧光粉Ca2SiO3Cl2:Eu2+，Mn2+的发光性质

用高温固相法合成了Eu²⁺，Mn²⁺共激活的Ca₂SiO₃Cl₂高亮度白色发光材料，并对其发光性质进行了研究. 该荧光粉在近紫外光激发下发出强的白色荧光，Eu^{2+中心形成峰值为419 nm和498 nm的特征宽带，通过Eu2+中心向Mn2+中心的能量传递导致了峰值为578 nm的发射，三个谱带叠加从而在单一基质中得到了白光. 激发光谱均分布在250—415 nm的波长范围，红绿蓝三个发射带的激发谱峰值分别位于385 nm，412 nm，370 nm和396 nm处，可以被InGaN管芯产生的紫外辐射有效激发. Ca₂SiO₃Cl₂:Eu2+，Mn2+是一种很有前途的单一基质白光LED荧光粉.}     

Luminescence properties of a new green emitting Eu2+-doped barium chlorosilicate phosphor

A new intense green light-emitting phosphor, the Eu²⁺-doped (BaO–BaCl₂–SiO₂) phosphor system, was synthesized at 800°C by the conventional high-temperature solid-state reaction. Its structure and luminescence properties were investigated by using thermogravimetry-differential scanning calorimetry (TG-DSC), X-ray diffraction (XRD), diffuse reflection spectra, photoluminescence (PL) and photoluminescence excitation (PLE) spectra. The photoluminescence spectrum reveals that this phosphor can be efficiently excited by near-ultraviolet (UV) light and blue light in the wavelength region covering 280 and 480 nm, which perfectly matches the emission wavelength of near-UV light-emitting diodes (LEDs). It emits an intense green light peaking at 502 nm, which is promising to develop possible applications for white LEDs.     

Ca2BO3Cl:Ce,Eu: A potential tunable yellow-white-blue-emitting phosphors for white light-emitting diodes

Polycrystalline Ca₂BO₃Cl:Ce³⁺,Eu²⁺ phosphors were synthesized by a solid-state reaction and which could display tunable color emission from blue to yellow under an ultraviolet (UV) source by adjusting the ratio of Ce³⁺ and Eu²⁺ appropriately. The mechanism of resonance-type energy transfer from Ce³⁺ to Eu²⁺ was established to be electric dipole-dipole natured, and the critical distance was estimated to be 31 Å based on the spectral overlap and concentration quenching model. A white light was obtained from Ca₂BO₃Cl:0.06Ce³⁺,0.01Eu²⁺ phosphor with chromaticity coordinates (x=0.31, y=0.29) and relative color temperature of 7330 K upon excitation with 360 nm, which is potentially a good candidate as an UV-convertible phosphor for white light-emitting diodes (LEDs).     

Luminescence properties of Y2WO6:Eu incorporated with Mo or Bi ions as red phosphors for light-emitting diode applications

In this study, the red phosphors, Y₂W_1−xMo_xO₆:Eu³⁺ and Y₂WO₆:Eu³⁺,Bi³⁺, have been investigated for light-emitting diode (LED) applications. In Y₂WO₆:Eu³⁺, the excitation band edge shifts to longer wavelength with the incorporation of Mo⁶⁺ or Bi³⁺ ions. The emission spectra exhibit ⁵D₀→⁷F₁ and ⁵D₀→⁷F₂ transition of Eu³⁺ ion at 588, 593, and 610 nm, respectively. Moreover, the bluish-green luminescence of the WO₆⁶⁻ at about 460 nm is observed to decrease with the incorporation of Mo⁶⁺, which results in pure red color. Thus, this study shows that the red phosphor, Y₂WO₆:Eu³⁺, incorporated with Mo⁶⁺ or Bi³⁺ ions is advantageous for LEDs applications.     

A white light emitting phosphor Sr1.5Ca0.5SiO4:Eu, Tb, Eu for LED-based near-UV chip: Preparation, characterization and luminescent mechanism

In this work, we report preparation, characterization and luminescent mechanism of a phosphor Sr_1.5Ca_0.5SiO₄:Eu³⁺,Tb³⁺,Eu²⁺ (SCS:ETE) for white-light emitting diode (W-LED)-based near-UV chip. Co-doped rare earth cations Eu³⁺, Tb³⁺ and Eu²⁺ as aggregated luminescent centers within the orthosilicate host in a controlled manner resulted in the white-light phosphors with tunable emission properties. Under the excitation of near-UV light (394 nm), the emission spectra of these phosphors exhibited three emission bands: one broad band in the blue area, a second band with sharp lines peaked in green (about 548 nm) and the third band in the orange-red region (588-720 nm). These bands originated from Eu²⁺ 5d→4f, Tb³⁺⁵D₄→⁷F_J and Eu³⁺⁵D₀→⁷F_J transitions, respectively, with comparable intensities, which in return resulted in white light emission. With anincrease of Tb³⁺ content, both broad Eu²⁺ emission and sharp Eu³⁺ emission increase. The former may be understood by the reduction mechanism due to the charge transfer process from Eu³⁺ to Tb³⁺, whereas the latter is attributed to the energy transfer process from Eu²⁺ to Tb³⁺. Tunable white-light emission resulted from the system of SCS:ETE as a result of the competition between these two processes when the Tb³⁺ concentration varies. It was found that the nominal composition Sr_1.5Ca_0.5SiO₄:1.0%Eu³⁺, 0.07%Tb³⁺ is the optimal composition for single-phased white-light phosphor. The CIE chromaticity calculation demonstrated its potential as white LED-based near-UV chip.     

Preparation and luminescence of blue-emitting phosphor Ca2PO4Cl:Eu2+ for n-UV white LEDs

A series of blue-emitting Ca_2 ? xEu_xPO₄Cl phosphors were synthesized by a solid state method in a reducing atmosphere. The factors those affect the structure and the photoluminescence (PL) intensities of phosphors, including the dosage of chlorine source CaCl₂, reaction time and annealing temperature, have been investigated in detail. X-ray diffraction (XRD) and photoluminescence measurements were performed to testify the crystal structure and luminescent properties. The optimal Eu²⁺ concentration was determined, and the mechanism of the concentration quenching was predominated by dipole–dipole interaction. The present phosphor exhibits a strong absorption in the near-UV region, emits an intense blue emission centered at 451 nm and presents excellent thermal stability, suggesting that the phosphor is competitive as a promising blue-emitting phosphor for near ultraviolet (n-UV) light-emitting diodes (LEDs).     

A potential red-emitting phosphor with high color-purity for near-UV light emitting diodes

New red tungstates phosphors, Na₅La_1?xLn_x(WO₄)₄ (Ln = Eu, Sm) and Na₅Eu_1?xSm_x(WO₄)₄, were prepared by solid-state reaction technique. And their structure and photo-luminescent properties were investigated. The introduction of Sm³⁺ broadened the excitation band around 400 nm of the phosphors, and strengthened the red emission. And the possible energy transfer process from Sm³⁺ to Eu³⁺ is discussed. The single red LED was fabricated by combining InGaN chip with Na₅Eu_0.94Sm_0.06(WO₄)₄ as red phosphor, intense red light can be observed by naked eyes. Then the phosphor Na₅Eu_0.94Sm_0.06(WO₄)₄ may be a good candidate for red component of near-UV InGaN-based W-LEDs, because of efficient red-emitting with broadened absorption around 400 nm and appropriate CIE chromaticity coordinates (x = 0.65, y = 0.34).     

The concentration quenching and crystallographic sites of Eu2+ in Ca2BO3Cl

A yellow phosphor, Ca2BO3CI：Eu2＋, is prepared by the high-temperature solid-state method. Under the condition of excitation sources ranging from ultraviolet to visible light, efficient yellow emission can be observed. The emission spectrum shows an asymmetrical single intensive band centred at 573 nm, which corresponds to the 4f65dl→4f7 transition of Eu2＋. Eu2＋ ions occupy two types of Ca2＋ sites in the Ca2BO3C1 lattice and form two corresponding emission centres, respectively, which lead to the asymmetrical emission of Eu2＋ in Ca2BO3C1. The emission intensity of Eu2＋ in Ca2BO3C1 is influenced by the Eu2＋ doping concentration. Concentration quenching is discovered, and its mechanism is verified to be a dipole-dipole interaction. The value of the critical transfer distance is calculated to be 2.166 nm, which is in good agreement with the 2.120 nm value derived from the experimental data.     

Preparation and Photoluminescence of Sm <Superscript>3+</Superscript> Doped YAlO <Subscript>3</Subscript> Phosphor

YAlO₃: Sm³⁺ phosphor has been synthesized by the solid state reaction method with calcium flouride used as a flux. The resulting YAlO₃: Sm³⁺ phosphor was characterized by X-ray diffraction (XRD) technique, Fourier transmission infrared spectroscopy (FTIR), photoluminescence . . PL excitation spectrum was found at 254,332,380,400,407, 603 and 713 nm. Under excitation of UV(713 nm) YAlO₃: Sm³⁺ (0–3 %) broad band emission were observed from 400 to 790 nm with a maximum around 713 nm of YAlO₃ host lattice accompanied by weak emission of Sm³⁺ (⁴G_5/2 – ⁶H_5/2, ⁶H_7/2,⁶H_9/2) transitions. The results of the XRD show that obtained YAlO₃: Sm³⁺ phosphor has a orthorhombic structure. The study suggested that Sm³⁺ doped phosphors are potential luminescence material for laser diode pumping and inorganic scintillators.