基于菌紫质F态的永久光存储研究

在线偏振飞秒激光激发下, 菌紫质通过双光子光化学反应可以生成具有永久光致各向异性的蓝移产物F₅₄₀态. 基于F₅₄₀态的永久光致各向异性, 通过调控飞秒激光空间光场分布, 可以在菌紫质薄膜中实现永久光信息存储. 本文使用纯相位型空间光调制器调制飞秒激光光场, 在物镜焦平面上生成光学点阵图案, 可以将信息快速记录在菌紫质薄膜中. 同时, 通过改变入射激光偏振方向, 可以实现偏振复用光存储, 这在高密度光存储和数据加密领域具有潜在应用.     

Polarization multiplexed write-once-read-many optical data storage in bacteriorhodopsin films

In polymeric films of bacteriorhodopsin (BR) a photoconversion product, which was named the F620 state, was observed on excitation of the film with 532 nm nanosecond laser pulses. This photoproduct shows a strong nonlinear absorption. Such BR films can be used for write-once-read-many (WORM) optical data storage. We demonstrate that a photoproduct similar or even identical to that obtained with nanosecond pulses is generated on excitation with 532 nm femtosecond pulses. This photoproduct also shows strong anisotropic absorption, which facilitates polarization storage of data. The product is thermally stable and is irretrievable to the initial B state either by photochemical reaction or through a thermal pathway. The experimental results indicate that the product is formed by a two-photon absorption process. Optical WORM storage is demonstrated by use of two polarization states, but more polarization states may be used. The combination of polarization data multiplexing and extremely short recording time in the femtosecond range enables very high data volumes to be stored within a very short time.     

Self-assembled volume vortex grating induced by femtosecond laser pulses in glass

We presented a microfabrication process for optical volume vortex grating inside glass by femtosecond laser pulses. The self-trapped filament of femtosecond laser pulses can induce hundreds μm-long region refractive-index changes in glass. We realized the restructured optical vortex beams using a collimated He–Ne laser beam. The maximum first-order diffraction efficiency was about 19.6%. The volume vortex grating structure fabricated in glass is polarization dependent.     

Effect of the laser fluence on structural and optical characterization of thin CdS films synthesized by femtosecond pulsed laser deposition

CdS thin films have been grown on Si(1 1 1) and quartz substrates using femtosecond pulsed laser deposition. X-ray diffraction, atomic force microscopy, photoluminescence measurement, and optical transmission spectroscopy were used to characterize the structure and optical properties of the deposited CdS thin films. The influence of the laser fluence (laser incident energy in the range 0.5–1.5 mJ/pulse) on the structural and optical characterizations of CdS thin films has been studied. The results indicate that the structure and optical properties of the CdS thin films can be improved as increasing the per pulse output energy of the femtosecond laser to 1.2 mJ. But when the per pulse output energy of the femtosecond laser is further increased to 1.5 mJ, which leads to the degradation of the structure and optical properties of the CdS thin films.     

Excimer laser deposited CuO and Cu<Subscript>2</Subscript>O films with third-order optical nonlinearities by femtosecond <Emphasis Type="Italic">z</Emphasis>-scan measurement

By controlling the oxygen pressure, single-phase CuO and Cu₂O thin films have been obtained on quartz substrates using a pulsed laser deposition technique. The structure properties and linear optical absorption of the films were characterized by X-ray diffraction and UV–VIS spectroscopy. By performing z-scan measurements using a femtosecond laser (800 nm, 50 fs), the real and imaginary parts of the third-order nonlinear susceptibility, Re χ ⁽³⁾ and Im χ ⁽³⁾, of the films were determined. Both CuO and Cu₂O films exhibited large optical nonlinearities, which is comparable to those in some representative semiconductor films such as ZnO and GaN films using femtosecond laser excitation. Compared with Cu₂O films, the CuO films showed larger third-order nonlinear optical effects under off-resonance excitation. Furthermore, the mechanisms of the optical nonlinearities in CuO and Cu₂O films are explained in the main text. It was suggested that the reasons of the difference in their nonlinear refractive effects may be related to the different electronic structure in CuO and Cu₂O materials.     

Optical properties of a waveguide written inside a LiTaO3 crystal by irradiation with focused femtosecond laser pulses

Optical waveguides were fabricated by modifying the optical properties inside a LiTaO₃ crystal by irradiation with femtosecond laser pulses, and the performance and optical properties of the waveguide were investigated. On the basis of near-field pattern of the light guided through the waveguides, the optimum writing conditions such as the pulse energy and the pulse duration were determined. The waveguide written inside a LiTaO₃ crystal had a strong polarization dependence of guided light. Observation by a polarized microscope suggested that the stress distribution around the photoexcited region should be responsible for the polarization dependence of guided light. In addition, the second harmonic generation from a laser beam passing through the waveguide was observed, which suggests that the ferroelectric properties of LiTaO₃ were preserved after the photoexcitation.     

Design and fabrication of an optimum holographic optical element lens for a femtosecond laser pulse using a hologram computer-aided design tool

Design and fabrication of an optimum holographic optical element (HOE) lens for a femtosecond laser pulse using a hologram computer-aided design (CAD) tool is presented. The hologram CAD tool, which the authors have developed can design, analyze, and evaluate holograms fabricated by interferometrical technique. The function of the tool is extended to design and analyze a HOE lens illuminated with a femtosecond laser pulse. An optimum HOE lens for a laser pulse, which has 130 fs duration, 720 nm central wavelength, and 10 nm spectrum bandwidth, is designed by the tool. The optimum HOE lens gives both high diffraction efficiency and small amount of aberration. The designed HOE lens is fabricated and its optical characteristics have been experimentally evaluated. The reconstructed point images agree with the results of the numerical simulations by the tool. The tool demonstrates the capability of designing the optimum HOE lens for a femtosecond laser pulse.     

Size dependence of non-linear optical properties of SiO2 thin films containing InP nanocrystals

SiO₂ composite thin films containing InP nanocrystals were fabricated by radio-frequency magnetron co-sputtering technique. The microstructure of the composite thin films was characterized by X-ray diffraction and Raman spectrum. The optical absorption band edges exhibit marked blueshift with respect to bulk InP due to strong quantum confinement effect. Non-linear optical absorption and non-linear optical refraction were studied by a Z-scan technique using a single Gaussian beam of a He-Ne laser (632.8 nm). We observed the saturation absorption and two-photon absorption in the composite films. An enhanced third-order non-linear optical absorption coefficient and non-linear optical refractive index were achieved in the composite films. The nonlinear optical properties of the films display the dependence on InP nanocrystals size. Received: 27 June 2000 / Accepted: 27 June 2000 / Published online: 13 September 2000     

Fabrication of microelectrodes deeply embedded in LiNbO3 using a femtosecond laser

We present a novel technique to fabricate deeply embedded microelectrodes in LiNbO₃ using femtosecond pulsed laser ablation and selective electroless plating. The fabrication process mainly consists of four steps, which are (1) micromachining of microgrooves on the surface of LiNbO₃ by femtosecond laser ablation; (2) formation of AgNO₃ films on substrates; (3) scanning the femtosecond laser beam in the fabricated microgrooves for modification of the inner surfaces; and (4) electroless copper plating. The void-free electroless copper plating is obtained with appropriate cross section of microgrooves and uniform initiation of the autocatalytic deposition on the inner surface of grooves. The dimension and shape of the microelectrodes could be accurately controlled by changing the conditions of femtosecond laser ablation, which in turn can control the distribution of electric field inside LiNbO₃ crystal for various applications, opening up a new approach to fabricate three-dimensional integrated electro-optic devices.     

Microlens arrays of high-refractive-index glass fabricated by femtosecond laser lithography

Microlens arrays of high-refractive-index glass GeO₂-SiO₂ were fabricated by femtosecond laser lithography assisted micromachining. GeO₂-SiO₂ thin glass films, which were deposited by plasma-enhanced chemical vapor deposition, have a refractive index of 1.4902 and exhibit high transparency at wavelengths longer than 320 nm. Using a femtosecond laser, three-dimensional patterns were written inside resists on GeO₂-SiO₂ films, and then the patterns were transferred to the underlying films by CHF₃ and O₂ plasma treatments. This combined process enabled us to obtain uniform microlens structures with a diameter of 38 μm. The heights of the transferred lenses were approximately one-quarter the height of the resist patterns, due to differences in the plasma etching rates between GeO₂-SiO₂ and the resist. The lens surfaces were smooth. When 632.8-nm-wavelength He-Ne laser light was normally coupled to the lenses, focal spots with a diameter of 3.0 μm were uniformly observed. The combined process was effective in fabricating three-dimensional surfaces of inorganic optical materials.     

Formation of periodic structures by the space-selective precipitation of Ge nanoparticles in channel waveguides

Thermally stabilized channel waveguides with Bragg gratings were fabricated by the space-selective precipitation technique of crystalline Ge nanoparticles using KrF excimer laser irradiation. The periodic structures consisting of Ge nanoparticles were formed in Ge-B-SiO₂ thin glass films after exposure to an interference pattern of the laser followed by annealing at 600 °C. The channel waveguides with the periodic structures were fabricated by the cladding of the patterned Cr layers on the films. The diffraction peak for the TE-like mode of 11.8 dB depth was observed clearly at a wavelength of 1526.4 nm, indicating that the periodic structure also served as the optical band-pass filter in optical communication wavelength. The spectral shape, diffraction efficiency, and diffraction wavelength remained unchanged even after annealing at 400 °C. Furthermore, a low temperature dependence of the diffraction wavelength - as low as 8.1 pm/°C - was achieved. The diffraction efficiency was further enhanced after subsequent annealing at 600 °C. The space-selective precipitation technique is expected to be useful for the fabrication of highly reliable optical filters or durable sensing devices operating at high temperature.     

Luminescence and structural properties of thermally evaporated benzanthrone dyes thin films

We report optical and luminescence properties of 3-N, N-diacetylaminobenzanthrone thin films deposited on glass substrate by thermal evaporation. The structural and optical properties of organic thin films were studied by means of the confocal microscope with an input of femtosecond laser radiation, X-ray diffractometer, and scanning electron microscope (SEM). Intense luminescence with the maximum at 530 nm was observed when excited by laser radiation with the wavelengths 458, 476, 488, 496, 514 nm. In addition, the luminescence caused by two-photon absorption of femtosecond (fs) laser radiation has been investigated. Semi empirical calculations by AM1 and ZINDO/S methods and ab initio calculations using Gaussian software were carried out to estimate the electron system of structure. The calculations show planar configurations for the aromatic core and diacetylamino fragment of this compound. The study of the structure of benzanthrone derivative thin films with X-ray diffraction (XRD) methods, indicates the distance between molecular layers and ordered molecular fragments.     

Enhancement of waves at rotational oscillations of a liquid

The generation of coherent optical phonons in an antimony film has been directly observed by the femtosecond electron diffraction method. The sample has been excited by a femtosecond laser pulse (λ = 800 nm) and probed with a pulsed photoelectron beam. Oscillations of the intensity corresponding to vibration frequencies of optical phonons excited by the laser have been observed in the obtained diffraction patterns: totally symmetric (A_1g) and twofold degenerate (E_2g) phonon modes of antimony and their combinations.     

Multilayer Au/TiO2Composite Films with Ultrafast Third-Order Nonlinear Optical Properties

We report on the ultrafast third-order optical nonlinearity in multilayer Au/TiO2 composite films fabricated on quartz substrates by pulsed laser deposition technique. The linear optical properties of the films are determined and optical absorption peaks due to surface plasmon resonance of Au particles are observed at about 590hm. The third-order optical nonlinearities of the films are investigated by z-scan method using a femtosecond laser （50 fs） at the wavelength of 800 nm. The sample showed fast nonlinear optical responses with nonlinear absorption coefficient and nonlinear refractive index being -3.66 × 10^-10 m/W and -2.95 × 10^-17 m^2/W, respectively. The results also show that the nonlinear optical effects increase with the increasing Au concentration in the composite films.     

Manufacturing of Nd:Gd3Ga5O12 ridge waveguide lasers by pulsed laser deposition and ultrafast laser micromachining

Laser radiation is used both for the deposition of the laser active thin films and for the micro structuring to define wave guiding structures for the fabrication of waveguide lasers. Thin films of crystalline and amorphous neodymium doped Gd₃Ga₅O₁₂ are grown on single crystal yttrium aluminium garnet by pulsed laser deposition using excimer laser radiation.Manufacturing of the laser active waveguides by micro structuring is done using femtosecond laser ablation of the deposited films. The structural and optical properties of the films and the morphology of the structured waveguides are determined in view of the design and the fabrication of compact and efficient diode pumped waveguide lasers. The resulting waveguides are polished, provided with resonator mirrors, pumped using diode lasers and the waveguide lasers are characterized. The spectroscopic properties of the amorphous waveguide are investigated and an infrared waveguide laser is demonstrated. To our knowledge, there have been no reports by other groups of the successful operation of a structured waveguide laser fabricated by this technique or of a waveguide laser made from amorphous neodymium doped Gd₃Ga₅O₁₂.     

CuO薄膜的三阶非线性光学特性研究

采用脉冲激光沉积技术在Si(100)和熔石英基片上制备了单相的CuO薄膜.通过X射线衍射仪,拉曼光谱仪,场发射扫描电镜和紫外可见光光度计对薄膜的结构,表面形貌和光学性质进行了表征. 场发射扫描电镜结果表明CuO薄膜中晶粒排列致密且分布均匀,其尺寸约为45nm.结合飞秒激光(800nm,50fs)和Z扫描方法测量了薄膜的三阶非线性光学特性,结果表明CuO薄膜具有超快的非线性光学响应且非线性折射率和非线性吸收系数均为负值,其大小分别为-3.96×10^-17 m^{2< 关键词： CuO薄膜 Z-扫描')" href="#">Z-扫描 三阶光学非线性}     

基于高重复频率飞秒激光直写技术制作衍射光栅的研究

基于由光子晶体光纤飞秒激光器产生的高重复频率飞秒激光搭建了飞秒激光微加工系统,利用LabVIEW编写程序精密控制三维移动平台的移动路径和高速快门,在加工功率为1.5W、移动速率为1mm/s时,利用直写技术在无胶铬版上得到了微米量级的任意形状的平面衍射光栅。利用CCD相机对光栅制备过程进行实时监视,保证了光栅的加工质量。制备的光栅在显微镜下观察,条纹边缘清晰、线纹粗细均匀。使用He-Ne激光照射加工的光栅,可以获得清晰、稳定、与理论符合很好的夫琅和费(Frauhofer)衍射图样,显示了所加工的光栅具有良好的光学性能。实验结果也表明了光子晶体光纤飞秒激光在光栅制作过程中所具备的良好的加工性能。     

Nanosecond and femtosecond ablation of La0.6Ca0.4CoO3: a comparison between plume dynamics and composition of the films

Thin films of La_0.6Ca_0.4CoO₃ were grown by pulsed laser ablation with nanosecond and femtosecond pulses. The films deposited with femtosecond pulses (248 nm, 500 fs pulse duration) exhibit a higher surface roughness and deficiency in the cobalt content compared to the films deposited with nanosecond pulses (248 nm, 20 ns pulse duration). The origin of these pronounced differences between the films grown by ns and fs ablation has been studied in detail by time-resolved optical emission spectroscopy and imaging. The plumes generated by nanosecond and femtosecond ablation were analyzed in vacuum and in a background pressure of 60 Pa of oxygen. The ns-induced plume in vacuum exhibits a spherical shape, while for femtosecond ablation the plume is more elongated along the expansion direction, but with similar velocities for ns and fs laser ablation. In the case of ablation in the background gas similar velocities of the plume species are observed for fs and ns laser ablation. The different film compositions are therefore not related to different kinetic energies and different distributions of various species in the plasma plume which has been identified as the origin of the deficiency of species for other materials.     

Nonlinear optical absorption and refraction of epitaxial Ba0.6Sr0.4TiO3 thin films on (001) MgO substrates

Highly epitaxial Ba_0.6Sr_0.4TiO₃ (BST) ferroelectric thin films were fabricated on (001) MgOsubstrates by pulsed laser deposition. The nonlinear optical absorption coefficients (β) and refraction indices (γ) of the BST thin films on (001) MgO substrates were investigated using the single beam Z-scan technique with femtosecond laser pulses at the wavelengths of 790 nm and 395 nm, respectively, at room temperature. The nonlinear absorption coefficients of BST thin films were measured to be ∼0.087 cm/GW and ∼0.77 cm/GW at 790 nm and 395 nm, respectively. The nonlinear refraction indices of BST thin films exhibit a strong dispersion from a positive value of 6.1×10^-5 cm²/GW at 790 nm to a negative value of -4.0×10^-5 cm²/GW at 395 nm near band gap. The dispersion of γ is roughly consistent with Sheik-Bahae’s theory for the bound electronic nonlinear refraction resulting from the two-photon resonance. These results show that the BST film is a promising material as a candidate for nonlinear optical applications. PACS 42.70.Mp; 78.20.-e; 81.05.-t     

飞秒激光烧蚀LiNbO3晶体的形貌特征与机理研究

采用了不同能量的单脉冲和多脉冲飞秒激光对LiNbO₃晶体进行烧蚀，并刻蚀了表面衍射型光栅.通过扫描电镜和原子力显微镜观察了烧蚀点的形貌特征，首次发现利用单束飞秒激光脉冲对LiNbO₃晶体烧蚀，可以得到超衍射极限的烧蚀点，当聚焦光斑直径约为2μm、能量为170nJ的单脉冲飞秒激光作用时，烧蚀点的直径约为400nm，100nJ，17个脉冲作用时烧蚀点的直径约为800nm.同时可以观察到在能量较低的多脉冲飞秒激光作用下， LiNbO₃晶体呈现出大约200nm周期性分布的波纹状结构.实验结果表明，选择合适参数的飞秒激光脉冲可以对LiNbO₃晶体进行超衍射极限加工，这对于利用飞秒激光制作LiNbO₃基质的微纳光电子器件有十分重要的意义.