Structural and optical properties of poly-vinylpyrrolidone modified ZnO nanorods synthesized through simple hydrothermal process

The synthesis of nanocrystalline zinc oxide (ZnO) in the presence of poly-vinylpyrrolidone (PVP) as capping agent through hydrothermal process, and their structural and optical properties were reported. PVP modified ZnO nanorods grown hydrothermally involve a heterogeneous chemical reaction in the presence of water as a solvent medium and reaction temperature of 100 °C for 7 h in a hot air oven and calcined in air at 500 °C for 3 h. Crystal structure, phase purity and average crystallite size of ZnO were studied by powder X-ray diffraction (PXRD). The strain associated with the as-prepared samples due to lattice deformation was estimated by Williamson–Hall (W–H) analysis. Structural morphology was investigated using scanning electron microscopy (SEM), which showed the formation of nanorods with PVP capping. The growth mechanism of ZnO nanorods and its capping by poly-vinylpyrrolidone are briefly discussed through FT-IR adsorption spectra. The optical behavior of the samples was analyzed through photoluminescence (PL) spectroscopy with an emission spectra in visible region ∼418 nm indicate the applicability of using it as a transport material in solar cells.     

Optical emission from disordered multi-branched ZnO nanorods formed by catalyst-free growth

We have demonstrated catalyst-free fabrication of multi-branched ZnO nanorods and their interesting optical properties. Under Xe lamp excitation (325 nm), it is found that the ethanol rinsing leads to an obviously enhanced ultraviolet emission at room temperature. Moreover, temperature-dependent emission spectra exhibit an anomalous temperature dependence of the ultraviolet emission intensity. This has been analyzed in terms of the competition between the radiative and nonradiative hopping processes using a model developed for disordered porous semiconductors. With femtosecond pulse excitation (640 nm), two-photon-induced photoluminescence is observed, which is confirmed by the quadratic dependence of the emission intensity on the excitation pulse energy.     

A study on morphology control and optical properties of ZnO nanorods synthesized by microwave heating

In this study, we present morphology control investigations on zinc oxide (ZnO) nanorods synthesized by microwave heating of a mixture of zinc nitrate hexahydrate and hexamethylenetetramine (HMTA) precursors in deionized water (DI water). To study the morphology and structural variations of the obtained ZnO nanorods in different molar ratio of zinc nitrate hexahydrate to HMTA, X-ray diffraction (XRD), scanning electron microscopy (SEM) images, Raman scattering, and photoluminescence (PL) spectroscopy were measured. XRD and SEM images are utilized to examine the crystalline quality as well as the morphological properties of the ZnO nanorods. It is found that morphology control can be achieved by simply adjusting the reactant concentrations and the molar ratio of zinc nitrate hexahydrate to HMTA. Raman scattering and PL spectroscopy measurements were demonstrated to study the size- and shape-dependent optical response of the ZnO nanorods. The Raman scattering result shows that the intensity of LO mode at around 576 cm^?1 decreases with the increase in the molar ratio of zinc nitrate hexahydrate to HMTA, indicating the reduction of defect concentrations in the synthesized ZnO nanorods. Room temperature PL spectrum of the synthesized ZnO nanorods reveals an ultraviolet (UV) emission peak and a broad visible emission. An enhancement of UV emission appears in the PL spectra as the molar ratio of zinc nitrate hexahydrate to HMTA increases, indicating that the defect concentration of the synthesized ZnO nanorods can be reduced by increasing the molar ratio.     

Enhanced optical and field emission properties of CTAB-assisted hydrothermal grown ZnO nanorods

We have developed a simple N-cetyl-N,N,N-trimethyl ammonium bromide (CTAB)-assisted hydrothermal route for the production of ZnO one-dimensional (1D) nanostructures on zinc foil at reaction temperature of 160 °C. With the increase of CTAB concentration, the one-dimensional structures change from microrod to a mixture of nano- and microrod and finally to nanorods. X-ray diffraction studies confirmed the proper phase formation of the grown nanostructures. The room temperature photoluminescence spectra showed that ZnO nanostructures prepared with increased CTAB concentration exhibited enhanced band edge UV emission and also blue shift of the emission peak. All the samples show no defect related green emission. Field emission property of the 1D structures has been investigated in detail. By tuning the CTAB concentration, the field emission property was optimized. The nanorods synthesized with high CTAB showed turn-on and threshold fields of 3.2 and 5 V/μm, respectively, which are comparable to the values for vapour phase synthesized high field emitting ZnO nanostructures.     

Enhancement of the ultraviolet emission of ZnO nanorods by terphenyl liquid-crystalline ligands modification

We have developed a novel method to modifying the surface of ZnO nanorods (ZnO NRs) using p-hexoxyterphenylol (HTph-OH) as liquid crystal ligands. The structure and morphology of the modified ZnO NRs were characterized using Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD) and atomic force microscopy (AFM). AFM measurement showed that the dispersion of ZnO NRs could be dramatically improved by the surface modification of HTph-OH and further annealing treatment at its liquid crystal state temperature (150 °C). The remarkable decrease of the annealed composite film roughness is because the HTph-OH chains self-organize into more ordered structure induced by mesogens after annealing treatment, which may push the ZnO NRs to form oriented nano-dispersing structure. The optical properties of the modified ZnO NRs were investigated by UV-vis absorption spectroscopy and photoluminescence spectroscopy (PL). Markedly enhanced band-edge ultraviolet photoluminescence and significantly reduced defect-related emission were observed. We attribute this observation to the nearly perfect surface passivation of the ZnO NRs by the HTph-OH molecules. Meanwhile, UV emission of modified ZnO NRs could be further enhanced by increasing the concentration of HTph-OH and annealing treatment at its liquid crystal state temperature.     

Ag-doped ZnO nanorods synthesized by two-step method

A two-step method is adopted to synthesize Ag-doped ZnO nanorods.A ZnO seed layer is first prepared on a glass substrate by thermal decomposition of zinc acetate.Ag-doped ZnO nanorods are then assembled on the ZnO seed layer using the hydrothermal method.The influences of the molar percentage of Ag ions to Zn ions(RAg/Zn) on the structural and optical properties of the ZnO nanorods obtained are carefully studied using X-ray diffractometry,scanning electron microscopy and spectrophotometry.Results indicate that Ag ions enter into the crystal lattice through the substitution of Zn ions.The<002>c-axis-preferred orientation of the ZnO nanorods decreases as RAg/Zn increases.At RAg/Zn >1.0%,ZnO nanorods lose their c-axis-preferred orientation and generate Ag precipitates from the ZnO crystal lattice.The average transmissivity in the visible region first increases and then decreases as R Ag/Zn increases.The absorption edge is first blue shifted and then red shifted.The influence of Ag doping on the average head face,and axial dimensions of the ZnO nanorods may be optimized to improve the average transmissivity at RAg/Zn <1.0%.     

Patterned growth of ZnO nanorods and their field emission properties

Patterned zinc oxide (ZnO) nanorods were fabricated on the different patterned silicon nanocrystallite (SiNC) substrates via a simple thermal evaporation method without any catalyst. The as-synthesized products were examined by X-ray diffraction (XRD), scanning electron microscopy (SEM), respectively. The efficient field emission with low turn-on and threshold field, 3.5 V/μm and 8.1 V/μm, was obtained. The experimental results demonstrate that these products could be one of the promising candidates for field emission displays.     

Formation of aligned ZnO nanorods on self-grown ZnO template and its enhanced field emission characteristics

We report a novel method for producing aligned ZnO nanorods (ANR) on self-grown ZnO template in a single step process involving growth of ZnO by vapor transport, followed by quenching of growing ZnO flux in liquid nitrogen. In the present study Zn powder turns into ZnO sheet under oxygen flow at ∼900 °C and bottom surface of the sheet acts as template for the growth of ANR. It is revealed from XRD and EDAX analysis that the bottom of the sheet is Zn rich region and acts as self catalyst for the growth of ANR. The grown nanorods have length up to several tens of micrometers with diameters ranging from ∼100 to 150 nm. Microstructural analysis of ANR indicates the fractal like configuration. The field emission properties have been investigated for ANR with fractal geometry using the ANR on self-grown ZnO template as a cathode directly. The turn-on electric field required to draw current density of ∼1.0 μA/cm² has been found to be ∼0.98 V/μm. The field enhancement factor based on Fowler-Nordheim (F-N) plot was found to be ∼7815 for ANR. The fractal geometry of ANR has been shown to be advantageous for achieving improved field emission features. The present investigations of synthesis involving formation of ANR over self-grown ZnO template, together with fractal configuration of the as-synthesized ANR, are first of their type.     

Synthesis and optical properties of flower-like ZnO nanorods by thermal evaporation method

Flower-like ZnO nanorods have been synthesized by heating a mixture of ZnO/graphite powders using the thermal evaporation and vapor transport on Si (1 0 0) substrates without any catalyst. The structures, morphologies and optical properties of the products were characterized in detail by using X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), photoluminescence (PL) and Raman spectroscopy. The synthesized products consisted of large quantities of flower-like ZnO nanostructures in the form of uniform nanorods. The flower-like ZnO nanorods had high purity and well crystallized wurtzite structure, whose high crystalline quality was proved by Raman spectroscopy. The as-synthesized flower-like ZnO nanorods showed a strong ultraviolet emission at 386 nm and a weak and broad yellow-green emission in visible spectrum in its room temperature photoluminescence (PL) spectrum. In addition, the growth mechanism of the flower-like ZnO nanorods was discussed based on the reaction conditions.     

ZnO nanorods with different morphologies and their field emission properties

ZnO nanorods with different morphologies were grown by changing the temperature of the process using the thermal vapor deposition method without a catalyst. The X-ray diffraction pattern of these nanorods showed a single-crystalline wurtzite structure and a c-axis orientation. The turn-on fields of the pencil-like and normal ZnO nanorods were 1.7 V/μm and 2.2 V/μm at a current density of 0.1 μA/cm², and the emission current density from the ZnO nanorods reached 1 mA/cm² at bias fields of 5.1 V/μm and 7.5 V/μm, respectively. The results indicated that ZnO nanorods could give sufficient brightness as a field emitter in a flat panel display.     

Synthesis,structural, optical and magnetic properties of Cu-doped ZnO nanorods prepared by a simple direct thermal decomposition route

Cu-doped ZnO nanorods (i.e. Cu = 1.75, 3.55, 5.17 and 6.39 at.%) have been successfully synthesized by simple, direct, thermal decomposition of zinc and copper acetates in air at 300 °C for 6 h. The prepared samples were characterized by X-ray diffraction (XRD) and transmission electron microscopy. The XRD results indicate that the 1.75 at.% Cu-doped ZnO sample has a pure phase with the ZnO wurtzite structure, while the impurity phases are detected with increasing Cu concentrations. It was found that the doping of Cu results in a reduction of the preparation temperature. The optical properties of the samples were also investigated by UV–visible spectroscopy and photoluminescence measurements. The results show that the Cu doping causes the change in energy-band structures and effectively adjusts the intensity of the luminescence properties of ZnO nanorods. X-ray photoelectron spectroscopy analysis implies that there are some oxygen vacancies in the samples and also indicates that all the doped samples are associated with the mixture of Cu ion states (Cu²⁺ and Cu¹⁺/Cu⁰). Magnetic measurements by vibrating sample magnetometry indicate that undoped ZnO is diamagnetic, whereas all of the Cu-doped ZnO samples exhibit room temperature ferromagnetic behavior. We suggest that Cu substitution and density of oxygen vacancies (V _o) may play a major role in the room temperature magnetism of the Cu-doped ZnO samples.     

Structural and optical properties of the S-doped ZnO particles synthesized by hydrothermal method

Sulfur-doped ZnO particles have been synthesized by hydrothermal method. The structural and optical properties were studied systematically by XRD, scanning electron microscopy (SEM), and photoluminescence. SEM results show that the particle is hexagonal and the average size decreases with increasing sulfur doping, which means a retardant effect of sulfur on the growth of S-doped ZnO. XRD results show that the lattice parameters increase with more sulfur, which means an effective sulfur doping and increasing strain. Optical characterization also shows that the effective sulfur doping will enhance the green emission and suppress the near bandgap emissions.     

Electrical and optical properties of Sb-doped ZnO thin films synthesized by sol–gel method

Sb-doped ZnO thin films with different values of Sb content （from 0 to 1.1 at.%） are deposited by the sol-gel dip- coating method under different sol concentrations. The effects of Sb-doping content, sol concentration, and annealing ambient on the structural, optical, and electrical properties of ZnO films are investigated. The results of the X-ray diffraction and ultraviolet-visible spectroscopy （UV-VIS） spectrophotometer indicate that each of all the films retains the wurtzite ZnO structure and possesses a preferred orientation along the c axis, with high transmittance （〉 90%） in the visible range. The Hall effect measurements show that the vacuum annealed thin films synthesized in the sol concentration of 0.75 mol/L each have an adjustable n-type electrical conductivity by varying Sb-doping density, and the photoluminescence （PL） spectra revealed that the defect emission （around 450 nm） is predominant. However, the thin films prepared by the sol with a concentration of 0.25 mol/L, despite their poor conductivity, have priority in ultraviolet emission, and the PL peak position shows first a blue-shift and then a red-shift with the increase of the Sb doping content.     

固相反应法制备Co掺杂ZnO的磁性和光学性能研究

研究了以固相反应法制备Co掺杂ZnO粉体的磁性和光学性能，测试结果表明对于均匀掺杂的Zn_0.95Co_0.05O粉体，Co²⁺随机取代Zn²⁺的位置进入ZnO晶格.Co²⁺之间的3d自旋电子耦合交换作用使得近邻的Co²⁺自旋反平行，Zn_0.95Co_0.05O粉体在3—300K表现为顺磁性，而非铁磁性. 关键词： ZnO 固相反应 稀磁半导体 顺磁性     

Studies on structural and magnetic properties of Co-doped pyramidal ZnO nanorods synthesized by solution growth technique

Large-area arrays of highly oriented Co-doped ZnO nanorods with pyramidal hexagonal structure are grown on silica substrates by wet chemical decomposition of zinc–amino complex in an aqueous medium. In case of undoped ZnO with an equi-molar ratio of Zn²⁺/hexamethylenetetramine (HMT), highly crystalline nanorods were obtained, whereas for Co-doped ZnO, good quality nanorods were formed at a higher Zn²⁺/HMT molar ratio of 4:1. Scanning electron microscope (SEM) studies show the growth of hexagonal-shaped nanorods in a direction nearly perpendicular to the substrate surface with a tip size of ～50 nm and aspect ratio around 10. The XRD studies show the formation of hexagonal phase pure ZnO with c-axis preferred orientation. The doping of Co ions in ZnO nanorods was confirmed by observation of absorption bands at 658, 617 and 566 nm in the UV–vis spectra of the samples. The optical studies also suggest Co ions to be present both in +2 and +3 oxidation states. From the photoluminescence studies, a defect-related emission is observed in an undoped sample of ZnO at 567 nm. This emission is significantly quenched in Co-doped ZnO samples. Further, the Co-doped nanorods have been found to show ferromagnetic behavior at room temperature from vibrating sample magnetometer (VSM) studies.     

Growth of ZnO nanorods by a simple chemical method

ZnO nanorods were grown by a near-room-temperature, simple, chemical solution method on large-area Zn foils and substrate materials such as silicon, and zinc oxide thin films on silicon and glass. Study of the ZnO nanorods on the different substrates by electron microscopy methods shows that the morphology and size of the ZnO nanorods can be tuned varying the growth parameters and the substrates used. The growth mechanism is briefly discussed. Photoluminescence experiments at room temperature reveal a major emission peak of the nanorods at around 385 nm, which is attributed to the band edge transition of ZnO and weaker defect-related visible band peaks. PACS 81.05.Dz; 78.55.Et; 81.07.-b     

Fabrication of Co-doped ZnO nanowires and their temperature-dependent ultraviolet emission properties

Co-doped ZnO nanowires have been fabricated through a high temperature vapor–solid deposition process. The temperature-dependent ultraviolet emission properties of Co-doped ZnO nanowires under 10–300 K were reported. The results show that there are multipeak emissions situated at the ultraviolet region. The investigation of the excitonic transition in Co-doped ZnO nanowires shows that there is an intensive ultraviolet periodic emission of Co-doped ZnO nanowires under low temperature. The oscillatory structure has an energy periodicity about 70 meV. The oscillatory structure is mainly attributed to the longitudinal optical phonon replicas of the free exciton. The ultraviolet emission shows an obvious redshift with the increasing temperature.     

Microstructure and optical properties of ZnO nanoparticles prepared by a simple method

In this investigation, ZnO nanoparticles were prepared by a simple and rapid method. This method is based on the short time solid state milling and calcinations of zinc acetate and citric acid powders. The samples were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared (FTIR) spectroscopy, photoluminescence and UV-vis spectroscopy. It was shown that the calcination temperature significantly affected the particle size and optical properties of the synthesized ZnO nanoparticles. Calculation based on the XRD data shows that the average sizes of ZnO particles are in agreement with those from TEM images and the size of the particles increases on increasing the calcination temperature. Also the band gap of samples decreased from 3.29 to 3.23 eV on increasing the calcination temperature from 350 to 600 °C. Photoluminescence analyses show that many defects such as interstitial zinc, zinc vacancy and oxygen vacancy are responsible for the observed optical properties.     

Synthesis and optical properties of ZnO nanorods on indium tin oxide substrate

ZnO nanorods with uniform diameter and length have been synthesized on an indium-tin oxide (ITO) substrate by using a simple thermal evaporation method which is suitable to larger scale production and without any catalyst or additives. The samples were characterized with X-ray diffraction (XRD), scanning electron microscopy (SEM), ultraviolet-vis (UV-vis) absorption spectrum, photoluminescence (PL) spectrum and Raman spectrum. The single-phase ZnO nanorods grow well-oriented along the c-axis of its wurtzite structure on ITO substrate. The ZnO nanorods shows sharp and strong UV emission located at 380 nm without notable visible light emission in the PL spectrum, which suggests the good crystallinity of the nanorods, which was also testified by their Raman spectrum. The photodegradation of methylene orange (MO) in aqueous solution reveals that the well-arranged c-axis growth of ZnO nanorods possess evidently improved photocatalytic performance and these properties enable the ZnO nanorods potential application in UV laser.