Determination of cis-diamminedichloroplatinum(II) in human plasma using ion-pair chromatography with electrochemical detection

A thin-layer gold/mercury electrode and a hanging mercury drop electrode are compared as part of an evaluation of liquid chromatography (LC) with electrochemical detection (ED) for the determination of platinum species in human plasma ultrafiltrate. The platinum species, derived from an aged aqueous solution of the antineoplastic agent cis-diamminedichloroplatinum(II) (CDDP), can be separated by ion-pair chromatography. Variation of a number of parameters is described along with the limitations and advantages of each kind of electrode system. We have used our LC-ED technique to separate CDDP from its hydrolysis products and other non-platinum-containing species in human plasma ultrafiltrate with a detection limit of 62 ng/ml (ppb).     

Liquid chromatographic determination of cis-platin as platinum(II) in pharmaceutical preparation, serum and urine samples of cancer patients

Spectrophotometric and high performance liquid chromatographic (HPLC) methods have been developed for the determination of cis-platin and carboplatin based on the pre-column derivatization of platinum(II) with 2-acetylpyridine-4-phenyl-3-thiosemicarbazone. The complex was extracted in chloroform with molar absorptivity of 2.2 × 10⁴ L mol⁻¹ cm⁻¹ at 380 nm. The complex eluted from a Phenomenex C-18 (150 mm × 4.6 mm i.d.) column with methanol:water:acetonitrile:tetrabutyl ammonium bromide (1 mM) (44:30:25:1, v/v/v/v) with a flow rate of 1 ml/min and UV detection at 260 nm. Ruthenium(IV) and selenium(IV) also separated completely. The linear calibration curve was with 0.5-12.5 μg/ml and detection limit of 10 ng/ml platinum(II).The analysis of cis-platin and carboplatin injections by spectrophotometric and HPLC methods indicated relative standard deviation (R.S.D.) of 0.66-2.1%. The method was used for the determinations of cis-platin in serum and urine of cancer patients after chemotherapy and platinum contents were found 148-444 and 50-90 ng/ml with R.S.D. of 0.3-3.0 and 0.6-2.4% for the serum and urine, respectively. The recovery of platinum(II) from serum was 97% with R.S.D. 2.2%.     

Urine analysis of platinum species derived from cis-dichlorodiammineplatinum(II) by high-performance liquid chromatography following derivatization with sodium diethyldithiocarbamate.

A clinically useful method is described for the quantitative analysis of platinum species derived from cis-dichlorodiammineplatinum(II) in urine. The drug and its biodegradation products are derivatized directly in urine by reaction with sodium diethyldithiocarbamate (DDTC) to form a common product, a 2:1 DDTC-platinum adduct. This complex is stable and can be quantitatively extracted into 0.1 volumes of chloroform. An aliquot of the chloroform layer is then subjected to high-performance liquid chromatography on a muBondapak CN column and the eluent monitored spectrophotometrically at 254 nm. At this wavelength the DDTC-platinum adduct has a molar absorptivity of 43,000, and platinum levels of 25 ng/ml or urine can be detected with a precision of +/- 2.5% and an accuracy of +/- 4%.     

Catalytic method for determination of micro amounts of gold in iron ores

Summary Gold in iron ores has been determined by means of its catalytic action on the oxidation of mercury(I) by cerium(IV). The calibration curve is linear over the range 3–30 ng/ml. Only iridium(IV), platinum(IV), palladium(II), ruthenium(III) and gallium(III) interfere seriously, though some interference is experienced from lead(II), iron(III), osmium(VIII) and indium(III).

---

Zusammenfassung Gold wurde in Eisenerzen auf Grund seiner katalytischen Wirkung auf die Oxydation von Quecksilber(II) durch Cer(IV) bestimmt. Die Eichkurve verläuft von 2 bis 30 ng/ml linear. Nur Iridium(IV), Platin(IV), Palladium(II), Ruthenium(III) und Gallium(III) stören ernstlich, während eine geringfügige Störung auch durch Blei(II), Eisen(III), Osmium(VIII) und Indium(III) beobachtet wurde.

     

Highly sensitive differential pulse amperometric detection of second generation anti-tumor platinum compounds in HPLC effluents

Summary A highly sensitive on-line amperometric detection of platinum compounds in HPLC effluents was possible with the use of a polarographic detector. For TNO-1 (=cis-1,1-di(aminomethyl)-cyclohexane Pt(II)chloride) a linear dynamic range of at least three decades could be obtained (0.034–108g TNO-1/ml) with a detection limit of three times the noise signal at 0.7 ng TNO-1 (20ng Pt/ml). The sensitivity was 0.1 nA/ng TNO-1 (0.2nA/ng Pt). The within-day presicion was 1.1% at a concentration of 10.8g TNO-1/ml (n=10). With this system the compatibility was measured of TNO-6 with infusion fluids. In 0.15 M NaCl, TNO-6 (=cis-1,1-di(aminomethyl)-cyclohexanePt(II)sulphate) was converted into TNO-1 within 40 minutes. Molecular changes of TNO-6 were also observed in a 5% aqueous glucose solution.     

Reversed-phase high performance liquid chromatography-spectrophotometry of several platinum group metal complexes with 4-(5-Nitro-2-pyridylazo)resorcinol

The reversed-phase HPLC of several platinum group metal complexes with a new chromogenic reagent 4-(5-nitro-2-pyridylazo)resorcinol (5-NO(2)-PAR) on an ODS column using methanol-ethyl acetate-water (50:10:40, v/v/v) containing 10 mM HAc-NaAc buffer (pH 4.0), 10 mM tetrabutylammonium bromide and 10 mM Na(2)EDTA was investigated. The detection wavelength was 536 nm. Pd(II), Rh(III), Ru(III) and Pt(II) complexes of 5-NO(2)-PAR were separated and determined simultaneously within 18 min. Calibration ranges (ng/ml) were 1.5-500 for Pd(II), 1.5-500 for Rh(III), 2.1-500 for Ru(III) and 7.8-500 for Pt(II). Detection limits were 0.5, 0.5, 0.7 and 2.6 ng/ml, respectively.     

Determination of lead in preserved egg by flame atomic absorption spectrometry after chemically modified preconcentration

A sensitive method for the determination of lead in preserved egg by flame absorption spectrometry using ammonium pyrrolidine dithiocarbamate-polystyrene chemically modified platinum wire matrix is presented. The modified platinum wire matrix, after preconcentrating the lead, is placed in a flame burner for direct atomization and measurement. The concentration range is linear between 5 and 500 ng/ml lead in solution and the detection limit is 0.65 ng/ml. This new technique is sensitive and convenient.     

Development of a Specific Analytical Method for Cis-Dichlorodiammineplatinum (II) in Plasma

Abstract

An analytical method has been developed to specifically monitor cis-dichlorodiammineplatinum (II) in plasma. The drug is separated from plasma protein and other macromolecular species by centrifugal ultrafiltration, which removes components with molecular weight greater than 50,000. The ultrafiltrate was then fractionated by HPLC. Mixtures were chromatographed on a strong anion exchange column and the eluent monitored spectrophotometrically (at concentrations of analyte exceeding 1μg/ml) or by atomic absorption spectrometry. Using the latter readout system, the detected limit for the analyte was 4 0 ng/ml of plasma at the 2s level and the detector output was linearly related to the drug concentration over the range 40–1000 ng/ml. The method appears to specifically respond to parent drug and is able to differentiate between it and other platinum species (metabolites or breakdown products) which may be present in the sample.     

Spectrophotometric studies on the platinum(IV)-prochlorperazine bismethanesulfonate complex

We have studied the formation of a platinum complex and developed a simple, rapid and sensitive spectrophotometric method for the determination of platinum in solution. The method is based on the complexation reaction of the chromogen, prochlorperazine bismethane-sulfonate (PCPMS), with platinum(IV) in phosphoric acid medium which forms a reddish brown 1 1 complex with an absorption maximum around 528 nm. The reaction is fast in the presence of copper(II) and goes to completion within 1 min. Beer's law is obeyed over the concentration range 0.3–7.2 g/ml of platinum(IV) with an optimal range of 1.2–6.6 g/ml. The molar absorptivity is 2.65 × 10⁴1 mol^–1 cm^–1 and the Sandell's sensitivity is 7.8 ng cm^–2. The stability constant, logK, of the complex is 4.96±0.1 at 25 ° C. The effects of time, temperature, concentrations of acids, PCPMS and copper(II), and the interference by various ions are investigated. The method has been successfully applied to the determination of platinum content in alloys and minerals.     

Extractive separation of platinum from macroamounts of palladium using triphenylphosphine oxide and its successive spectrophotometric determination by the stannous chloride method

Trialkylphosphine oxides extract more effectively chloride complexes of platinum than of palladium(II). Of the examined tributylphosphine (TBPO), trioctylphosphine (TOPO), and triphenylphosphine (TPPO) oxides the latter one makes possible best separation of these metals.The extraction of platinum with TPPO from solutions containing platinum and palladium unfavorably decreases with increasing palladium concentration. Using 0.1 M TPPO solution in dichloroethane, at HCl concentration 7.5 M, it is possible to separate 2–200 μg Pt/ml at a palladium concentration not higher than 10 mg/ml.Separation of platinum from macroamounts of palladium has been combined with spectrophotometric determination of platinum by means of stannous chloride. The method has been applied to the analysis of palladium for platinum content.     

Spectrophotometric determination of platinum in glass after extraction with polyurethane foam

A spectrophotometric method has been developed for determination of trace amounts of platinum in glass. The method is based on the extraction of platinum(II) from 1M hydrochloric acid containing 0.2M stannous chloride and 4 x 10(-4)M dithizone onto polyurethane foam, elution with acetone (containing 3% v/v concentrated hydrochloric acid) and measurement of the absorbance of the eluate at 530 nm. Beer's law is obeyed up to 10.0 microg/ml Pt. The minimum platinum level in the eluate that can be determined by this method is 0.1 microg/ml.     

一种基于纳米金介导生物沉积铂催化氢还原的电化学免疫分析新方法

本文发展了一种基于纳米金介导生物沉积铂并以铂催化氢还原伏安法进行检测的高灵敏电化学免疫分析新方法。该方法采用夹心免疫分析模式,实现了人免疫球蛋白（HIgG）的测定。首先在聚苯乙烯微孔板中固定羊抗HIgG捕获抗体,HIgG捕获后,碱性磷酸酶标记的HIgG抗体修饰的纳米金探针通过与HIgG的形成的夹心复合物而结合在微孔板上。结合的碱性磷酸酶催化抗坏血酸磷酸酯底物水解产生抗坏血酸,后者在纳米金上介导下还原铂离子沉积于纳米金表面。沉积的金属铂用王水溶解并电富集于玻碳电极上。通过测定铂催化氢还原产生的阴极电流,可实现HIgG的高灵敏分析。催化氢还原电流与HIgG浓度对数在0.1~100ng/ml之间呈线性相关性,检测限达22pg/ml。由于铂催化氢还原的高灵敏度及纳米金介导的生物沉积放大反应,该法具有较高的分析灵敏度,且免疫分析微孔板模式使得该法可同时用于大量样品的分析。     

On the reaction between iodide and mercury(II)

A survey on the iodide-mercury(II) reaction and its analytical uses is given. Titrations of iodide with mercury(II) in various acidities, using nitrate, acetate, and chloride as titrants and silver or platinum amalgam as the indicator electrode, showed that mercury(II) nitrate is the best titrant giving 0.46 V/0.1 ml potential break in comparison with 0.14 V/0.1 ml of mercury(II) chloride and 0.35V/0.1 ml of mercury(II) acetate, all titrants being 0.05 M in mercury(II).     

Application of matrix-modification in determination of thallium in waste water by graphite-furnace atomic-absorption spectrometry

A method has been developed for the determination of thallium in waste water at the ng ml level by graphite-furnace atomic-absorption spectrometry. If microgram amounts of palladium or platinum are used as a matrix modifier, the ashing temperature for thallium can be raised to 1000 degrees , and the interference of halides and mineral acids is greatly reduced. The relative standard deviation found was 2% (9 replicate determinations) at the 8-ng ml thallium level, and the detection limit 1 ng ml .     

Flow-injection determination of copper(II) based on its catalysis on the redox reaction of cysteine with iron(III) in the presence of 1,10-phenanthroline

A redox reaction of cysteine with iron(III) proceeds slowly in the presence of 1,10-phenanthroline (phen). However, this reaction is accelerated in the presence of copper(II) as a catalyst, producing an iron(II)-phen complex (lambda(max)=510 nm). A sensitive spectrophotometric flow-injection method is proposed for the determination of copper(II) based on its catalytic action on this redox reaction. The dynamic range was 0.1-10 ng ml(-1) of copper(II) with a relative standard deviation of 1.0% (n=10) for 1.0 ng ml(-1) of copper(II) at a sampling rate of 30 h(-1). The detection limit (S/N=3) is 0.04 ng ml(-1). The proposed method was successfully applied to the determination of copper in river water as a certified reference material.     

Colour reaction of platinum(II) with 5-(4-nitrophenylazo)-8-(p-toluenesulphonamido)-quinoline and its analytical applications

A simple, rapid and sensitive spectrophotometric method has been developed for the determination of platinum. 5-(4-Nitrophenylazo)-8-(p-toluenesulphonamido)quinoline (NPTSQ) reacts with platinum(II) almost instantaneously in alkaline solution to form a violet-red 1:2 complex with an absorption maximum at 640 nm. Beer's law is obeyed over the concentration range 0-1 mug/ml platinum. The molar absorptivity is 1.37 x 10(5) 1.mole(-1).cm(-1). The method has been used for the determination of microamounts of platinum in catalysts and anode slime.     

Extraction and separation studies of platinum(IV) with N-n-octylaniline

N-n-octylaniline in xylene is used for the extractive separation of platinum(IV) from acidic media. Platinum(IV) was extracted quantitatively with 10 ml of 3% reagent in xylene from 0.5 to 10 and 2.5 to 10 M hydrochloric and sulphuric acid, respectively. It was stripped from organic phase with water and estimated photometrically with stannous chloride. The effect of metal ion, acids, reagent concentration and of various foreign ions has been investigated. The method affords binary separation of platinum(IV) from iron(III), cobalt(II), nickel(II) and copper(II), and is applicable to the analysis of synthetic mixtures and alloys. The method is fast, accurate and precise.     

The GC determination of cisplatin as platinum(II) from pharmaceutical preparations and blood sample of cancer patients

Summary A capillary gas chromatographic method is described for the determination of cisplatin based on the complexation of platinum(II) with bis(isovalerylacetone) ethylenediimine (H₂IVA₂en) and extraction in chloroform. The chromatography was carried out on a BP1 or a BP5 column with an FID. Copper(II), nickel (II) and palladium(II) separated completely and did not affect the determination of platinum(II). The method was applied of the determination of cisplatin in a pharmaceutical preparation and blood samples of cancer patients after infusion of cisplatin. The amounts of cisplatin in blood were found to be within 246–283 ng mL⁻¹ with a C.V. of 2.35–4.26%.     

High performance liquid chromatographic separation and UV determination of cobalt, copper iron and platinum in pharmaceutical preparations using bis(isovalerylacetone)ethylenediimine as complexing reagent

The reagent bis(isovalerylacetone)ethylenediimine(H₂IVA₂en) has been examined for HPLC separation and UV determination of cobalt, copper, iron and platinum using off-line precolumn derivatization and extraction in chloroform. The complexes of cobalt(II), cobalt(III), iron(II), iron(III) and the reagent have been subsequently separated on a Microsorb C-18 column. The complexes were eluted isocratically using ternary mixtures of methanol/water/acetonitrile. Detection was achieved by UV monitoring. Detection limits for Co(II), Co(III), Fe(II) and Fe(III) were 2.5–5.0 ng/injection, based on 0.5–1.0 g/ml with 5 l/injection. The concentration of cobalt(II) and cobalt(III) in aqueous solution have been determined. The presence of oxovanadium(IV), platinum(II), and nickel(II) did not affect the determinations. The HPLC method developed has been applied to the determination of cobalt, copper, iron and platinum in pharmaceutical preparations at the 30 g/g to 15 mg/g level and the obtained results were compared to those of atomic absorption spectrometry.     

A sensor for hydrogen sulphide

A sensor for hydrogen sulphide is described. It is based on the catalytic effect of the gas on the iodine-azide reaction. An iodine-azide solution is exuded from a sintered-glass ball (10mm diameter) at a flow-rate of 3.30 ml min whilst its potential is monitored by two platinum electrodes. one inside and the other outside the ball. Sample is carried in a gas at a flow-rate of 350 ml min . Carbon disulphide, methyl mercaptan or sulphur dioxide in amounts up to a hundred times that of the hydrogen sulphide do not interfere. The detection limit is 5 ng and the determination limit is 8 ng, with a relative standard deviation of 10%.