Cation-exchange behaviour of several elements in hydrobromic acid-organic solvent media

The cation-exchange characteristics of 19 elements in hydrobromic acid-organic solvent media have been investigated. In these systems the batch distribution coefficients of the metal ions were determined, using the strongly acidic cation-exchange resin Dowex 50, X8. Methanol, ethanol, n-propanol, isopropanol, methyl glycol, acetone, tetrahydrofuran and acetic acid have been used as the organic solvents. The conditions most suitable for the quantitative separation of the elements are indicated and discussed. Several examples of successful separations are tabulated.     

Cation-exchange behaviour of several elements in hydrofluoric acid-organic solvent media

The cation-exchange characteristics of 15 elements with the strongly acidic cation-exchange resin Dowex 50 x 8 were investigated in media containing varying concentrations of organic solvents and aqueous hydrofluoric acid. The determination of the distribution coefficients was carried out in 0.15-1.2 M hydrofluoric acid solutions containing 0-90% of the organic solvents methanol, ethanol, n-propanol, isopropanol, methyl glycol, acetone, tetrahydrofuran, and acetic acid. Based on these distribution data the possibilities of separations of the various elements are indicated and discussed.     

Cation-exchange behaviour of several elements in nitric acid-organic solvent media

The cation-exchange behaviour of 19 elements towards the strongly acidic cation-exchange resin Dowex 50-X8 in media containing varying concentrations of organic solvents and aqueous nitric acid is reported. Based on the determination of the distribution coefficients of these elements in the organic solvents methanol, ethanol, n-propanol, isopropanol, methyl glycol, acetone, tetrahydrofuran and acetic acid, the conditions most suitable for their quantitative separation are indicated and discussed.     

Anion-exchange behaviour of several elements in hydrobromic acid-organic solvent media

The anion-exchange behaviour of 19 elements in hydrobromic acid-organic solvent media has been investigated. The batch distribution coefficients of the metal ions were determined in these systems employing the strongly basic anion-exchange resin Dowex 1, x 8. Organic solvents used were methanol, ethanol, n-propanol, isopropanol, methyl glycol, acetone, tetrahydrofuran and acetic acid. The most suitable conditions for some quantitative separations based on these equilibrium studies are indicated and discussed.     

Cation-exchange behaviour of several elements in hydrochloric acid-organic solvent media

In the present paper the cation-exchange characteristics of 20 elements towards the strongly acidic cation-exchange resin Dowex 50 X 8 in media containing varying concentrations of organic solvents and aqueous hydrochloric acid were investigated. Based on the determination of the distribution coefficients of these elements in the organic solvents methanol, ethanol, n-propanol, isopropanol, methyl glycol, acetone, tetrahydrofuran, and acetic acid, the conditions most suitable for their quantitative separation are indicated and discussed.     

Cation-exchange separation of strontium from manganese and other elements in citrate media

Mn(IT) can be eluted quantitatively with 0.067M ammonium citrate at pH 7.0 or 7.5 from a column of AG50W-X8 cationexchange resin (200-400 mesh), and separated from Sr which is retained. Mg, Ca, Cu(II), Zn and Co(II) accompany Mn(II). From citric acid solutions up to 1M (20%) and from 5 % citric acid solution at pH 2.2 both Mn(II) and Sr are retained very strongly. This is in agreement with some previous work but disagrees with a recent statement by others that 5 % citric acid at pH 2.2 is an effective eluting agent for Sr.     

Cation-exchange separation of uranium from other elements in tetrahydrofuran-nitric acid media containing trioctylphosphine oxide

The batch distribution coefficients of Cu(II), Za, Cd, Fe(III), Hg(II), Mg, Co(II), Ni, Pb, Ca and Bi were determined on the strongly acidic cation-exchange resin Dowex 50 x 8 in 0.1M trioctylphosphine oxide in tetrahydrofuran-5% 12M nitric acid. In this mixture all these metal ions, except Bi, have high K(d)-values and can be separated quantitatively from uranium which has a distribution coefficient of 0.1. Mixtures of U with Cu, Ni, Co, Cd or Fe were analysed to test the applicability of such separations. Different titrimetric and spectrophotometric methods were used to determine the elements subsequent to their separation from uranium on ion-exchange columns. The results show that accurate and effective separations can be achieved.     

Cation-exchange behaviour of several elements in formic acid solution

The cation-exchange characteristics of 20 elements towards the strongly acidic cation-exchange resin Dowex 50 x 8 in media containing varying concentrations of formic acid and mixtures of formic acid with aqueous dioxan were investigated. Possible separations are indicated and discussed. Bismuth may be quantitatively separated from copper.     

Hydrogenolysis of the cyclopropyl group into an isopropyl group in the presence of a platinum catalyst and hydrobromic acid

Reduction of cyclopropylmethylamines proceeded under mild reaction conditions in the presence of platinum (IV) oxide catalyst and hydrobromic acid at rt, providing isobutylamines and no linear butylamines. The ring cleavage reaction was widely applicable to cyclopropane rings in various compounds such as N-cyclopropylalkyl, O-cyclopropylalkyl, and C-cyclopropylalkyl derivatives. Although unactivated cyclopropane rings were also cleaved, the cyclobutane ring was tolerated under the same reaction conditions.     

Cation-exchange isolation and ICP-AES determination of rare earth elements in geological silicate materials

An ion-exchange ICP-AES method for the determination of 14 rare earth elements (REEs) and Y in geological materials is described. The separation of REEs from Ba using a Dowex 50W-X8 cation resin is especially considered since Ba is an excellent internal standard for REE determination by this technique. Although total recovery with either HCl or HNO₃ may be achieved, it is advantageous to use both acids sequentially. Volume and concentration of the acids are optimized attaining a quantitative separation of REEs from Ba by the introduction of the sample solution in a 1.75 mol/l HCl medium, followed by elution with 2 mol/l HNO₃ to remove matrix elements and with 7 mol/l HNO₃ to elute the analytes. The total elution volume is significantly reduced without decreasing the efficiency. The behaviour of the matrix constituents under the selected conditions is also studied, evaluating their elution percentages in each step. The final solution obtained contains only the REEs and Y, with the bulk of Sc and minor amounts of Cr, Fe, Hf and Ta. Experimental data for 5 geological reference standards (NIM-G, GSP-1, AGV-1, NIM-L and NIM-S) are reported. Good agreement between the present results and previously accepted values by various analytical techniques is observed.     

电感耦合等离子体质谱（ICP-MS）法测定碳质板岩样品中铂族元素

碳质板岩属黑色岩系,与多种金属(包括贵金属)成矿有密切的联系。按照常规的分析方法,硫镍试金溶剂配方都不能对贵金属元素有较好的富集,影响贵金属元素的测定。根据石墨岩中样品的成份特征,对测定铂族元素的常规硫镍试金配方进行了改进,增加了硝酸钾和氧化镁,且无需加入锇稀释剂。通过实验选择了合适比例配料,熔融后粉碎镍扣,加入盐酸分解,碲共沉淀剂富集。过滤沉淀用王水溶解。用电感耦合等离子体质谱(ICP-MS)法测定,Lu作内标,对碳质板样品中的铂族元素进行了测定。结果表明,加标回收率为85%～105%,能够满足碳质板岩中铂族元素的分析测定要求。     

Cation-exchange studies of yttrium(III) and its separation from various other elements

Summary Systematic studies are presented on the cation-exchange behaviour of yttrium on Dowex 50W-X8. HCl, HNO₃, H₂SO₄, NH₄Cl, NH₄NO₃, (NH₄)₂SO₄, CH₃COONH₄, NaCl, NaNO₃, malonic acid, tartaric acid and EDTA were used as eluting agents. Y was separated from a large variety of elements by selective elution or selective adsorption. Thus it was possible to separate it from many common ions such as alkalis, alkaline earths, Bi, Hg, V, Cd, U, In, Co, Ga, Zn, Sc, Fe, Al, Ni, and Ce by selective elution. It was separated from Ti, Zr, Hf, and Sb by selective sorption in citrate media and from Cr, Tl, Pb, and Th by gradient elution.     

Radiochemical fire-assay for determination of the platinum group elements

The radioactive study of Ni–NiS bead fire-assay followed by neutron activation analysis showed nearly quantitative collection of the platinum group elements and gold in the bead. However, there was clearly some loss of gold and ruthenium at the dissolution and filtration stage. A preliminary study of the radiochemical fire-assay method indicates that the technique could overcome the problem of losses. Chemical carrier behaves in the same way as platinum metal concentrate during the analytical procedure and could be used to evaluate yields during each determination. When applied to rock samples, the radiochemical fire-assay gives good sensitivity and could be applied to the determination of nanogram concentrations of the platinum group elements without the problem of high blank values from reagents.     

Recent advances in the determination of the platinum group elements and gold

Accurate determinations of the platinum group elements (PGEs) and gold, known as the precious metals, have always been difficult tasks. The metals are often present at trace levels in sample types of complex composition. This situation has improved recently due to developments of instrumental methods and their applications to analyses of the precious metals in a variety of matrices. Attention has been given to determinations of traces of precious metals in biological, clinical and environmental samples. Foremost in importance is inductively coupled plasma mass spectrometry (ICP-MS) which has provided a sensitive means of simultaneous determination of traces of PGEs and gold. Important extensions and improvements in atomic absorption spectrometry (AAS), nuclear and electrochemical methods have been reported also. More research on sample treatments, especially fire assays, applied to PGEs has been carried out. Chlorination has proven to be a viable alternative to fire assays for preconcentration of PGEs and gold in analyses of geological materials. In addition, the recent availability of some additional reference materials will be of great assistance in research work on precious metals.     

Distribution and speciation of platinum group elements in environmental matrices

The use of platinum group elements (PGEs) as components of autocatalytic converters attached to motor vehicles has resulted in serious contamination of the environment by Pt, Rh and Pd in nanocrystalline forms. Trace concentrations of PGEs, particularly the major component Pt, in environmental samples have been measured by sensitive instrumental procedures. These data have raised further questions about the nature of Pt species in contaminated soils and in plants grown in them. The focus of attention is changing from accumulations of data expressing total concentrations to investigations of speciation. Application of analytical procedures for research on speciation has provided information concerning transformations of Pt compounds in contaminated soils, the uptake of Pt by plants and the nature of Pt compounds in vegetation. Determination of background levels of precious metals in clinical and environmental matrices has required the development of analytical methods which combine uses of minimal quantities of reagents, and as small a number of chemical operations as possible to yield very low procedural blanks. Sensitive instrumental methods based upon high resolution inductively coupled plasma mass spectrometry and adsorptive stripping voltammetry have proven to be valuable for this work.     

Anion-exchange behaviour of a number of metal ions on DEAE-cellulose in hydrobromic and hydriodic acid media

Summary The adsorption behaviour of 48 metal ions on DEAE-cellulose layers has been investigated in aqueous hydrobromic and hydriodic acid media. R_F values are given as a function of the hydrobromic and hydriodic acid concentration over the ranges 0.01–6 mol dm^–3 and 0.01–3 mol dm^–3, respectively, and are compared with those obtained with Avicel SF. R_F spectra are comparatively simple in both media, reflecting the strong affinity of the bromide and iodide ions to the DEAE-cellulose phase. Pd, Pt, Re, Au and Hg are distributed chromatographically in either system, while most other metal ions exhibit rather extreme R_F values of near unity or zero. Therefore, the selectivity of the systems is particularly high for Pd, Pt, Re, Au and Hg, providing the possibility of their excellent selective separations.     

A survey of the determination of the platinum group elements

The platinum-group metals (PGMs), Ru, Rh, Pd, Os, Ir and Pt, are widely used as catalysts in petroleum and chemical processes. They find wide applications in automotive exhaust-gas control converters and are of immense importance to the electronics industry. They are found in many items of jewellery and serve to an increasing extent as a form of investment. The PGMs are extracted in minute quantities from a limited number of ores, found mainly in S. Africa and the USSR. They are concentrated and separated from each other by elaborate chemical processes. Because of their great intrinsic value (Pt $650 per oz; Rh $1400 per oz), the recycling of the PGMs from literally hundreds of different forms of scrap is an essential factor in the overall management of the PGM economy. In this survey emphasis is placed on the need to tailor the analytical method according to (a) the environment in which the PGMs occur, (b) the individual PGM concentrations, and (c) the desired sensitivity and precision. The factors which determine the choice of chemical, physicochemical and/or instrumental approaches are discussed. They are further commented on in extensive presentations of dissolution and separation techniques and methods for the final measurement of individual PGMs. Appendices are provided which present the compositions and sources of the products most frequently encountered in PGM analysis, along with information on methods of decomposition, separations required, type of separation, and final determination.     

Quantitative bioimaging of platinum group elements in tumor spheroids

Limited drug penetration into tumor tissue is a significant factor to the effectiveness of cancer therapy. Tumor spheroids, a 3D cell culture model system, can be used to study drug penetration for pharmaceutical development. In this study, a method for quantitative bioimaging of platinum group elements by laser ablation (LA) coupled to inductively coupled plasma mass spectrometry (ICP-MS) is presented. Different matrix-matched standards were used to develop a quantitative LA-ICP-MS method with high spatial resolution. To investigate drug penetration, tumor spheroids were incubated with platinum complexes (Pt(II)acetylacetonate, cisplatin) and the palladium tagged photosensitizer 5,10,15,20-tetrakis(3-hydroxyphenyl)porphyrin (mTHPP). Distribution and accumulation of the pharmaceuticals were determined with the developed method.