Spectrophotometric determination of nonionic surfactants by flow injection analysis utilizing ion-pair extraction and an improved phase separator

The proposed flow-injection determination of nonionic surfactants of the general type RO(CH₂CH₂O)nH (where R is an alkyl or alkylphenyl group and n is the number of moles of oxyethylene group) is based on extraction of the colored ion-pair product formed between the nonionic surfactant and the regent tetrabromophenolphthalein ethyl ester potassium salt (TBPE-K). The complex is extracted into 1,2-dichloroethane and measured at 609 nm. A new phase separator is described. Triton X-100 is used as a model compounds, for which response is linear in the range 2–60 mg l^?1. Precision of the method is excellent with a relative standard deviation of <1.0%. The sensitivity of the method depends on the type of surfactant examined.     

A sensitive two-phase titration of anionic surfactants with a dilute tetraphenylphosphonium chloride solution

A visual indicator method is described for titrations of anionic surfactants with 5 × 10^-5 M tetraphenylphosphonium solution. Two dyes, the hydrophilic neutral red and the hydrophobic tetrabromophenolphthalein ethyl ester, are used as indicator in the presence of 1,2-dichloroethane.     

Optical Sensing Membrane Based on Tetrabromophenolphthalein Ethyl Ester for the Determination of Cationic Surfactants

Abstract

An optical sensing membrane for detection of cationic surfactants was developed. The optical sensing membrane is 2‐nitrophenyl octyl ether‐plasticized poly(vinyl chloride) membrane incorporating tetrabromophenolphthalein ethyl ester (TBPE). The response of the optical membrane to cationic surfactants was a result of extraction of cationic surfactant into the PVC membrane. The protonated TBPE deprotonates forming an ion associate with the extracted cationic surfactant; simultaneously, the deprotonation of the TBPE is accompanied by a spectral change. Namely, the extracted cationic surfactant changes color of the membrane from yellowish green to blue (absorption maximum: 622 nm). The optical membrane responds to cationic surfactants such as Zephiramine and cetyltrimethylammonium bromide in the concentration range from 1 µM to 100 µM.     

Flow-injection determination of sodium and potassium by separationon a silica column and extraction-spectrophotometry with benzo-18-crown-6 and tetrabromophenolphthalein ethyl ester

Sodium and potassium ions in waters are determined by flow-injection extraction-spectrophotometry. The ion-association complexes formed between the metal/crown ether cations and the tetrabromophenolphthalein ethyl ester anion (TBPE^-) are extracted into chlorobenzene/benzene (1:3) and the absorbance of the organic phase is measured after phase separation with a porous membrane. Sodium and potassium are separated on-line with a column (1 mm i.d.×30 cm) packed with silica gel (100-200 mesh). The manifold comprises four streams, each at 0.8 ml min^?1. The sample is injected into a water stream and mixed with a reagent stream containing lithium acetate and benzo-18-crown-6 before entering the silica gel column; after the separation, the stream is mixed with EDTA (trilithium salt) and lithium hydroxide, and then with the extraction solution containing TBPE.H. Extraction proceeds in a 2-m coil; the absorbance of the organic phase is measured at 620 nm. CAlibration graphs are linear inthe ranges 0–×10^?3 M sodium and 0–2×10^?4 M potassium. The sample throughput is 15 h^?1. The procedure is applicable to river and tap waters.     

Hygroscopic growth of self-assembled layered surfactant molecules at the interface between air and organic salts

We report here the self-assembly of surfactant molecules at the interface of air and the hygroscopic quaternary ammonium salt tetrabutylammonium acetate (TBAAc). Homogeneously dissolved surfactant molecules at 100 degrees C self-assemble upon contacting air due to high moisture adsorption by the organic salt when cooling down. Highly ordered lamellar phases with different lattice spacings have been observed when surfactants with various lengths of alkyl chains were used. C(n)TMAB/TBAAc systems showed all-trans conformation of interior methylene carbons and interdigited bilayers with an average CH2 increment of 0.119 nm, while C(n)NH2/TBAAc systems showed trans/gauche mixed conformations of interior methylene carbons and bilayers with an average CH2 increment of 0.247 nm. C(n)NH2s in C(n)NH2/TBAAc formed bilayers through water-mediated intermolecular hydrogen bonds with a water layer thickness of 0.51-0.61 nm. In C(n)TAB/TBAAc, as the head group of C(n)TAB is bigger, the interdigited bilayer thickness (d-spacing) is smaller, because the bigger head groups accommodate enough space for alkyl tails to come in between them.     

Hydrophobic indicators for two-phase titrations and their application to the determination of silver and pentachlorophenol

The hydrophobic dyes tetrabromophenolphthalein ethyl ester and 2,6-dichlorophenolindo-phenol are proposed as visual indicators for two-phase titrations. The aqueous phase is colourless throughout the titration and these indicators make it possible to detect the end-point of the titration by the colour of one or the other phase. The indicators allow the two-phase titration of the silver(I)-1,10-phenanthroline complex with tetraphenylborate and of pentachlorophenol with tetraphenylphosphonium chloride.     

非离子型表面活性剂对聚硅氧烷阴离子型乳液的耐电解质稳定性的影响

本文研究了非离子型表面活性剂对聚硅氧烷阴离子型乳液的耐电解质稳定性的影响。十二烷基聚氧乙烯醚C_12H_25(OCH_2CH_2)_nOH(n=6.3,C_12E_6.3)能提高乳液的氯化镁临界凝聚浓度。乳液的表面化学性质和乳液粒子表面上表面活性剂的组成表明C_12E_6.3与十二烷基苯磺酸之间存在着协同作用,组成了混合界面膜。根据DLVO理论对C_12E_6.3提高乳液耐电解质凝聚稳定性进行了解释。     

Yttrium complexes incorporating the chelating diamides [ArN(CH2)xNAr]2- (Ar = C6H3-2,6-iPr2, x= 2, 3) and their unusual reaction with phenylsilane

Novel yttrium chelating diamide complexes [(Y[ArN(CH(2))(x)NAr](Z)(THF)(n))(y)] (Z = I, CH(SiMe(3))(2), CH(2)Ph, H, N(SiMe(3))(2), OC(6)H(3)-2,6-(t)Bu(2)-4-Me; x = 2, 3; n = 1 or 2; y = 1 or 2) were made via salt metathesis of the potassium diamides (x = 3 (3), x = 2 (4)) and yttrium triiodide in THF (5,10), followed by salt metathesis with the appropriate potassium salt (6-9, 11-13, 15) and further reaction with molecular hydrogen (14). 6 and 11(Z = CH(SiMe(3))(2), x = 2, 3) underwent unprecedented exchange of yttrium for silicon on reaction with phenylsilane to yield (Si[ArN(CH(2))(x)NAr]PhH) (x = 2 (16), 3) and (Si[CH(SiMe(3))(2)]PhH(2)).     

An atomic absorption spectrometric method for the determination of non-ionic surfactants

A method is described for the determination of non-ionic surfactants in the concentration range 0.05–2 mg l^-1.Surfactant molecules are extracted into 1,2-dichlorobenzene as a neutral adduct with potassium tetrathiocyanatozincate(II) and the determination is completed by atomic absorption spectrometry. With a 150-ml water sample, the limit of detection is 0.03 mg l^-1(as Triton X-100).The method requires a single phase separation step, is applicable, without modification, to fresh, estuarine and sea-water samples and is relatively free from interference by anionic surfactants; the presence of up to 5 mg l^-1 of anionic surfactant (as LAS) introduces an error of no more than 0.07 mg l^-1 (as Triton X-100) in the apparent non-ionic surfactant concentration.     

Surfactant effect on the lower critical solution temperature of poly(organophosphazenes) with methoxy-poly(ethylene glycol) and amino acid esters as side groups

 The surfactant effect on the lower critical solution temperature (LCST) of thermosensitive poly(organophosphazenes) with methoxy-poly(ethylene glycol) and amino acid esters as side groups was examined in terms of molecular interactions between the polyphosphazenes and surfactants including various anionic, cationic, and nonionic surfactants in aqueous solution. Most of the anionic and cationic surfactants increased the LCST of the polymers: the LCST increased more sharply with increasing length and hydrophobicity of the hydrophobic part of the surfactant molecule. The ΔLCSTs (T _0.03M− T _0M), the change in the LCST by addition of 0 and 0.03 M sodium dodecyl sulfate (SDS), were found to be 7.0 and 14.5 °C for the polymers bearing ethyl esters of glycine and aspartic acid, respectively. The LCST increase of poly(organophosphazene) having a more hydrophobic aspartic acid ethyl ester was 2 times larger compared with that of the polymer having glycine ethyl ester as a side group. The binding behavior of SDS to the polymer bearing glycine ethyl ester as a hydrophobic group was explained from the results of titration of the polymer solutions containing SDS with tetrapropylammonium bromide. Graphic models for the molecular interactions of polymer/surfactant and polymer/surfactant/salt in aqueous solutions were proposed. Received: 17 February 2000/Accepted: 25 April 2000     

Spectrophotometric determination of strychnine and methylatropine by extraction with tetrabromophenolphthalein ethyl ester

A new application of monoacidic dyes is reported for the determination of strychnine and methylatropine. The method is based on solvent extraction into 1,2-dichloroethane of the ion-pair or addition compound formed between tetrabromophenolphthalein ethyl ester and quaternary ammonium salts or alkaloids. The absorbance of the extracts is linearly dependent on the concentration of strychnine or methylatropine initially present in the aqueous solution.     

Partition and water/oil adsorption of some surfactants

Adsorption isotherms have been determined at the water/oil interface for five biphasic systems involving surfactants (non-ionic and ionic) present in both phases at partition equilibrium. The systems studied were polyoxyethylene(23)lauryl ether (Brij35) in water/hexane and four ionic surfactants, hexadecyltrimethylammonium bromide (CTAB), and a series of three tetraalkylammonium dodecylsulfate (TEADS, TPADS, and TBADS) in water/CH 2Cl 2. Interfacial tension measurements performed at the water/air and water/oil interfaces provided all the necessary information for the determination of the adsorption parameters by taking partition into account. These measurements also allowed the comparison of the adsorption properties at both interfaces which showed an increase of the adsorption equilibrium constant and a decrease of the maximum surface concentration at the water/oil interface compared to water/air. The values of the critical aggregation concentration showed, in all cases, that only the surfactant dissolved in the aqueous phase contribute to the decrease of the water/oil interfacial tension. In the case of the four ionic surfactants, the critical aggregation concentration obtained in biphasic conditions were lowered because of the formation of mixed surfactant-CH 2Cl 2 aggregates.     

Frother/collector interactions in thin froth films and flotation

Aqueous thin film studies and surface tension measurements on a mixed surfactant system consisting of poly(ethylene oxide) (PEO), which was chosen as a model flotation frother, and potassium ethyl xanthate, which was chosen as a model flotation collector, enable the interaction between the two surfactants at the air/solution interface to be elucidated.

For the film containing the non-ionic frother, the interface was charged and addition of low concentrations of xanthate acted as a common electrolyte and reduced the thickness of the film, inducing rupture. However, at high xanthate collector concentrations, the negatively charged xanthate was found to interact with the non-ionic PEO causing an accumulation of negative charge at the air/solution interface. Higher frother concentrations were necessary to produce non-rupturing thin films upon increasing the xanthate concentration.     

Methyl and phenyl esters and thioesters of carboxylic acids as surrogate substrates for microassay of proteinase K esterase activity

The development of a microassay for proteinase K esterase activity with carboxylic acid esters is reported using novel substrates of the general formula R-C(O)-XR'. Highest rates of hydrolysis have been obtained with the O-phenyl esters CH(3)(CH(2))(n = 1 - 2)-S-(CH(2))(n = 1 - 2) C(O)-O-phenyl and their thioester analogs in studies where R, X and R' have been varied. The phenol release has been measured with 4-aminoantipyrine and potassium ferricyanide to determine the rates of O-phenyl ester hydrolyses. Thioester hydrolyses have been monitored continuously with 5,5'-dithio-bis (2-nitrobenzoic acid).     

Enhancing Water Stability of Metal-Organic Frameworks via Phosphonate Monoester Linkers

A new porous metal-organic framework (MOF), barium tetraethyl-1,3,6,8-pyrenetetraphosphonate (CALF-25), which contains a new phosphonate monoester ligand, was synthesized through a hydrothermal method. The MOF is a three-dimensional structure containing 4.6 ? × 3.9 ? rectangular one-dimensional pores lined with the ethyl ester groups from the ligand. The presence of the ethyl ester groups makes the pores hydrophobic in nature, as determined by the low heats of adsorption of CH(4), CO(2), and H(2)O (14.5, 23.9, and 45 kJ mol(-1), respectively) despite the polar and acidic barium phosphonate ester backbone. The ethyl ester groups within the pores also protect CALF-25 from decomposition by water vapor, with crystallinity and porosity being retained after exposure to harsh humid conditions (90% relative humidity at 353 K). The use of phosphonate esters as linkers for the construction of MOFs provides a method to protect hydrolytically susceptible coordination backbones through kinetic blocking.     

Effect of protic ionic liquids (PILs) on the formation of non-ionic dodecyl poly(ethylene oxide) surfactant self-assembly structures and the effect of these surfactants on the nanostructure of PILs

The ability of a series of non-ionic dodecyl poly(ethylene oxide) surfactants to form micelles in a variety of protic ionic liquids (PILs) was investigated using small and wide angle X-ray scattering (SAXS/WAXS). The C(12)E(n) surfactants with n = 3-8 were examined in PILs which contained either an ethyl, diethyl, triethyl, butyl, pentyl, ethanol or pentanol-ammonium cation in conjunction with either a nitrate or formate anion. The ability of the PILs to support micelles of these surfactants was highly dependent on their liquid nanostructure. The PILs containing hydroxyl groups on the cations were not nanostructured and had very low surfactant solubility (<1 wt%). The highly nanostructured PILs with butylammonium or pentylammonium cations contain large non-polar domains, and had excellent surfactant solubility, but due to the greater hydrocarbon solubility they had insufficient drive from the "solvophobic effect" to enable micelle formation. The PILs of ethylammonium nitrate (EAN), propylammonium nitrate (PAN), diethylammonium formate (DEAF) and triethylammonium formate (TEAF) had smaller non-polar domains, and all supported micelle formation below 20 wt% surfactant. The critical micelle concentration (CMC) of surfactants in EAN were two orders of magnitude greater than in water. The minimum molecular areas of the poly(ethylene oxide) head groups at the air/ionic liquid interface, A(min), were significantly larger in EAN than in water. The SAXS patterns from the micelles present in EAN fitted well to ellipsoids, whereas the micelles present in PAN fitted well to spheres. The nanostructure of select PILs was also influenced by the presence of surfactants.     

Determination of tetraphenylborate by two-phase titration with tetraphenylphosphonium salt

A visual indicator method has been developed for the titration of tetraphenylborate (TPB) with a 5 × 10^?5, M tetraphenylphosphonium (TPP) solution. A hydrophobic dye, tetrabromophenolphthalein ethyl ester (TBPE), is used as an indicator in the presence of 1,2-dichloroethane. The organic phase changes from yellow to blue at the endpoint. This method was applied to the determination of solubility product of TPP perchlorate. The extract of ephedrine, homatropine, perchlorate, or thiocyanate with TPB or TPP was titrated.     

The Adsorption of Gemini and Conventional Surfactants onto Some Soil Solids and the Removal of 2-Naphthol by the Soil Surfaces

The adsorption of two cationic gemini surfactants, [C(n)H(2n+1) N(+)(CH(3))(2)-CH(2)CH(2)](2).2Br(-), where n=12 and 14, on limestone, sand, and clay (Na-montmorillonite) from their aqueous solution in double-distilled water and the effect of this adsorption on the removal of 2-naphthol have been studied. Compared to those of conventional cationic surfactants with similar single hydrophilic and hydrophobic groups (C(n)H(2n+1)N(+)(CH(3))(3).Br(-), where n=12 and 14), the molar adsorptions of the gemini and the conventional surfactants on Na-montmorillonite are almost identical and very close to their cation exchange capacities. On sand and limestone, the molar adsorption of the cationic gemini surfactants is much larger than that of their corresponding conventional surfactants. Adsorption studies of the pollutants onto the three kinds of solids treated by either the gemini or the conventional surfactants show that the former are both more efficient and more effective at removing 2-naphthol from the aqueous phase. On all three soil solids, the addition of KBr increases the efficiency of the adsorption of both types of cationics and for most cases increases also the maximum amount adsorbed, but decreases slightly the efficiency of removal of 2-naphthol. On limestone, the anionic gemini adsorbs with one hydrophilic group oriented toward the Ca(2+) sites on the surface and its second hydrophilic group oriented toward the aqueous phase. The conventional anionic surfactant forms a double layer. The gemini anionic is more efficient and more effective than the conventional anionic in the removal of 2-naphathol from the aqueous phase. Both anionic conventional and gemini surfactants have no adsorption on sand. The adsorption mechanisms for all the surfactants on the three soil solid surfaces are discussed. Copyright 2001 Academic Press.     

Phase Separation Phenomenon in Non-ionic Surfactant TX-114 Micellar Solutions: Effect of Added Surfactants and Polymers

Clouding (or phase separation) in non-ionic surfactants is a well-known phenomenon. Clouding is to be avoided in some applications whereas in others it is preferred. Herein the results of CP (cloud point—the temperature at which solution separates into two phases) measurements of the non-ionic surfactant Triton X-114 (TX-114) in the presence of surfactants and polymers are presented. Cationic and nonionic surfactants, in the absence and presence of the quaternary salt tetrabutylammonium bromide (TBAB), increase the CP of TX-114. Anionic surfactants, in the absence of TBAB, increase the CP; in the presence of TBAB, these surfactants decrease the CP. Polymers of PEG and PVP series have been found to decrease the CP. The results are discussed by taking into consideration the nature of the added surfactants and polymers.     

正、负离子碳氟-碳氢表面活性剂混合水溶液的表面活性

1　前言碳氟表面活性剂是目前所有表面活性剂中表面活性最高的一类 ,具有很多碳氢表面活性剂无法取代的特殊用途[1] 。但是碳氟表面活性剂由于合成困难 ,价格昂贵 ,实际应用受到限大限制。研究表明 ,通过碳氟表面活性剂与碳氢表面活性剂的复配 ,有可能减少碳氟表面活性剂的用量而保持其表面活性 [1] 。在所有表面活性剂混合体系中 ,正、负离子表面活性剂混合体系具有最强的协同效应 [2 ] 。但由于正、负离子表面活性剂混合溶液一般在很低浓度即形成沉淀 ,对碳氟表面活性剂更是如此。因此目前有关碳氟—碳氢混合表面活性剂的研究主要集中在同…