Adsorptive stripping voltammetry determination of molybdenum(VI) in water and soil

A differential pulse stripping voltammetry method for the trace determination of molybdenum(VI) in water and soil has been developed. In 0.048M oxalic acid and 6 x 10(-5)M Toluidine Blue (pH 1.8) solution, Mo(V), the reduction product of Mo(VI) in the sample solution, can form a ternary complex, which can be concentrated by adsorption on a static mercury drop electrode at -0.1 V (vs. Ag/AgCl). The adsorbed complex gives a well-defined cathodic stripping current peak at -0.30 V, which can be used for determining Mo(VI) in the range 5 x 10(-10)-7 x 10(-9)M, with a detection limit of 1 x 10(-10)M (4 min accumulation). The method is also selective. Most of the common ions do not interfere but Sn(IV) and large amounts of Cu(2+), Ag(+) and Au(3+) affect the determination.     

Extractive-spectrophotometric determination of molybdenum with 4-unsubstituted-5-pyrazolones

A fairly sensitive and selective method for rapid determination of tracer amounts of molybdenum(V) as mixed-ligand complexes with thiocyanate and 4-unsubstituted-5-pyrazolones is described. The red complexes are extractable into chloroform from 1-5M hydrochloric or perchloric acid or 1-3M sulphuric arid media. The molar absorptivities are in the range 1.72-2.15 x 10(4)l.mole(-1).cm(-1) at 455 nm (lambda(max)). The method has been applied to the estimation of molybdenum in various synthetic and alloy-steel samples. In presence of excess of the reagent, Cu(II), Co(II), Mn(II), Fe(II), Fe(III), Al(III), Cr(III), Cr(VI), Ti(III), Ti(IV), Zr(IV), Hf(IV), V(III), V(IV), V(V), Nb(V), Ta(V), W(VI) and U(VI) do not interfere.     

Electroreduction of molybdenum(VI) at a prehydrogenated platinum electrode

The use of hydrogenated platinum electrodes allows observation of the electroreduction of some oxygenated ions, which is otherwise masked by the reduction of the hydrogen ion. The present paper deals with the reduction of molybdenum(VI) at a prehydrogenated platinum electrode in acid solutions. The experimental conditions for the electrode hydrogenation process are the following: 90 min at a cathodic current density of about 7 A/cm(2) for microelectrodes with an area of 0.02-0.03 cm(2); about 120 min at a current density of 1.5-2 A/cm(2) for microelectrodes with an area of 0.25-0.35 cm(2). The reduction of molybdenum(VI) in 0.8-1.6M H(2)SO(4) occurs in two consecutive steps: the more cathodic wave [Mo(V) to Mo(III)] is for the most part masked by the reduction of the solvent; the less cathodic wave [Mo(VI) to Mo(V)] takes place at E(1 2 ) values of about +0.07 V, is well shaped, diffusion-controlled and usable for the determination of molybdenum down to 4 x 10(-5)M or 6 x 10(-5)M if a rotating disk electrode is used. Interferences from diverse ions have been studied. A generalization of the effect of electrode hydrogenation on the reduction of those oxygenated ions so far studied [i.e., vanadium(IV), uranium(VI) and molybdenum(VI)] is presented.     

Redox chemistry of morpholine-based Os(VI)-hydrazido complexes: trans-[Os(VI)(tpy)(Cl)2(NN(CH2)4O)](2+)

The oxidations of benzyl alcohol, PPh3, and the sulfides (SEt2 and SPh2) (Ph = phenyl and Et = ethyl) by the Os(VI)-hydrazido complex trans-[Os(VI)(tpy)(Cl)2(NN(CH2)4O)](2+) (tpy = 2,2':6',2' '-terpyridine and O(CH2)4N(-) = morpholide) have been investigated in CH3CN solution by UV-visible monitoring and product analysis by gas chromatography-mass spectrometry. For benzyl alcohol and the sulfides, the rate law for the formation of the Os(V)-hydrazido complex, trans-[Os(V)(tpy)(Cl)2(NN(CH2)4O)](+), is first order in both trans-[Os(VI)(tpy)(Cl)2(NN(CH2)4O)](2+) and reductant, with k(benzyl) (25.0 +/- 0.1 degrees C, CH3CN) = (1.80 +/- 0.07) x 10(-4) M(-1) s(-1), k(SEt2) = (1.33 +/- 0.02) x 10(-1) M(-1) s(-1), and k(SPh2) = (1.12 +/- 0.05) x 10(-1) M(-1) s(-1). Reduction of trans-[Os(VI)(tpy)(Cl)2(NN(CH2)4O)](2+) by PPh3 is rapid and accompanied by isomerization and solvolysis to give the Os(IV)-hydrazido product, cis-[Os(IV)(tpy)(NCCH3)2(NN(CH2)4O)](2+), and OPPh3. This reaction presumably occurs by net double Cl-atom transfer to PPh3 to give Cl2PPh3 that subsequently undergoes hydrolysis by trace H2O to give the final product, OPPh3. In the X-ray crystal structure of the Os(IV)-hydrazido complex, the Os-N-N angle of 130.9(5) degrees and the Os-N bond length of 1.971(7) A are consistent with an Os-N double bond.     

Determination of molybdenum by extraction of its thiocyanate into ethyl methyl ketone

A simple, sensitive and selective spectrophotometric method for determination of molybdenum is described. A solution containing 100 mug of Mo in 2.5M hydrochloric acid is treated with ascorbic acid and ammonium thiocyanate and after standing for 8 min is shaken with an equal volume of ethyl methyl ketone for 30 sec. The absorbance of the complex is measured at 465 nm against a reagent blank. The complex is stable for 1 hour. There is no interference from Re(VII), SO(2-)(4), Cl(-), CH(3)COO(-), PO(3-)(4), NO(-)(3), C(2)O(2-)(4), citrate or tartrate, and at least 5 mg of U(VI), 10 mg of Cr(III, VI), Th, or Ni, and 20 mg of W(VI) Can be tolerated. Vanadium(V) interferes at the 500 mug level, and fluoride slightly decreases the absorbance.     

Redox and complexation chemistry of the Cr(VI)/Cr(V)-D-galacturonic acid system

The oxidation of d-galacturonic acid by Cr(VI) yields the aldaric acid and Cr(III) as final products when a 30-times or higher excess of the uronic acid over Cr(VI) is used. The redox reaction involves the formation of intermediate Cr(IV) and Cr(V) species, with Cr(VI) and the two intermediate species reacting with galacturonic acid at comparable rates. The rate of disappearance of Cr(VI), Cr(IV) and Cr(V) depends on pH and [substrate], and the slow reaction step of the Cr(VI) to Cr(III) conversion depends on the reaction conditions. The EPR spectra show that five-coordinate oxo-Cr(V) bischelates are formed at pH < or = 5 with the uronic acid bound to Cr(V) through the carboxylate and the alpha-OH group of the furanose form or the ring oxygen of the pyranose form. Six-coordinated oxo-Cr(V) monochelates are observed as minor species in addition to the major five-coordinated oxo-Cr(V) bischelates only for galacturonic acid : Cr(VI) < or =10 : 1, in 0.25-0.50 M HClO(4). At pH 7.5 the EPR spectra show the formation of a Cr(V) complex where the vic-diol groups of Galur participate in the bonding to Cr(V). At pH 3-5 the Galur-Cr(V) species grow and decay over short periods in a similar way to that observed for [Cr(O)(alpha-hydroxy acid)(2)](-). The lack of chelation at any vic-diolate group of Galur when pH < or = 5 differentiates its ability to stabilise Cr(V) from that of neutral saccharides that form very stable oxo-Cr(V)(diolato)(2) species at pH > 1.     

Electrochemical and complexation behavior of neptunium in aqueous perchlorate and nitrate solutions

Electrochemical and complexation properties of neptunium (Np) are investigated in aqueous perchlorate and nitrate solutions by means of cyclic voltammetry, bulk electrolysis, UV-visible absorption, and Np L(III)-edge X-ray absorption spectroscopies. The redox reactions of Np(III)/Np(IV) and Np(V)/Np(VI) couples are reversible or quasi-reversible, while the electrochemical reaction between Np(III/IV) and Np(V/VI) is irreversible because they undergo structural rearrangement from spherical coordinating ions (Np(3+) and Np(4+)) to transdioxoneptunyl ions (NpO2(n+), n = 1 for Np(V) and 2 for Np(VI)). The redox reaction of the Np(V)/Np(VI) couple involves no structural rearrangement on their equatorial planes in acidic perchlorate and nitrate solutions. A detailed analysis on extended X-ray absorption fine structure (EXAFS) spectra suggests that Np(IV) forms a decaaquo complex of [Np(H2O)10](4+) in 1.0 M HClO4, while Np(V) and Np(VI) exist dominantly as pentaaquoneptunyl complexes, [NpO2(H2O)5](n+) (n = 1 for Np(V) and 2 for Np(VI)). A systematic change is observed on the Fourier transforms of the EXAFS spectra for all of the Np oxidation states as the nitrate concentration is increased in the sample, revealing that the hydrate water molecules are replaced by bidentate-coordinating nitrate ions on the primary coordination sphere of Np.     

Separation and gravimetric determination of cerium and lanthanum with N-m-tolyl-m-nitrobenzohydroxamic acid

Cerium and lanthanum were determined gravimetrically by selective precipitation with N-m-tolyl-m-nitrobenzohydroxamic acid and separated from several metal ions such as Ag(+), Be(2+) , Pb(2+) , Mn(2+) , Cu(2+), Zn(2+) , Cd(2+) , Hg(2+) , Pd(2+) , Ga(3+) A1(3+) , Bi(3+) , Sb(3+), Sn(4+), Ce(3+) , Pr(3+) , Nd(3+) , Ti(4+), Zr(4+), Th(4+), V(5+) , Mo(6+) and U(6+) . The precipitates were weighted directly after drying at 110 degrees . The analytical results indicated the composition of the complexes to be (C(14)H(11)N(2)O(4))(n)M.     

Polyoxomolybdodiphosphonates: examples incorporating ethylidenepyridines

We have synthesized and structurally characterized three pyridylethylidene-functionalized diphosphonate-containing polyoxomolybdates, [{Mo(VI)O(3)}(2){Mo(V)(2)O(4)}{HO(3)PC(O)(CH(2)-3-C(5)NH(4))PO(3)}(2)](6-) (1), [{Mo(VI)(2)O(6)}(2){Mo(V)(2)O(4)}{O(3)PC(O)(CH(2)-3-C(5)NH(4))PO(3)}(2)](8-) (2), and [{Mo(V)(2)O(4)(H(2)O)}(4){O(3)PC(O)(CH(2)-3-C(5)NH(4))PO(3)}(4)](12-) (3). Polyanions 1-3 were prepared in a one-pot reaction of the dinuclear, dicationic {Mo(V)(2)O(4)(H(2)O)(6)}(2+) with 1-hydroxo-2-(3-pyridyl)ethylidenediphosphonate (Risedronic acid) in aqueous solution. Polyanions 1 and 2 are mixed-valent Mo(VI/V) species with open tetranuclear and hexanuclear structures, respectively, containing two diphosphonate groups. Polyanion 3 is a cyclic octanuclear structure based on four {Mo(V)(2)O(4)(H(2)O)} units and four diphosphonates. Polyanions 1 and 2 crystallized as guanidinium salts [C(NH(2))(3)](5)H[{Mo(VI)O(3)}(2){Mo(V)(2)O(4)}{HO(3)PC(O)(CH(2)-3-C(5)NH(4))PO(3)}(2)]·13H(2)O (1a) and [C(NH(2))(3)](6)H(2)[{Mo(VI)(2)O(6)}(2){Mo(V)(2)O(4)}{O(3)PC(O)(CH(2)-3-C(5)NH(4))PO(3)}(2)]·10H(2)O (2a), whereas polyanion 3 crystallized as a mixed sodium-guanidinium salt, Na(8)[C(NH(2))(3)](4)[{Mo(V)(2)O(4)(H(2)O)}(4){O(3)PC(O)(CH(2)-3-C(5)NH(4))PO(3)}(4)]·8H(2)O (3a). The compounds were characterized in the solid state by single-crystal X-ray diffraction, IR spectroscopy, and thermogravimetric and elemental analyses. The formation of polyanions 1 and 3 is very sensitive to the pH value of the reaction solution, with exclusive formation of 1 above pH 7.4 and 3 below pH 6.6. Detailed solution studies by multinuclear NMR spectrometry were performed to study the equilibrium between these two compounds. Polyanion 2 was insoluble in all common solvents. Detailed computational studies on the solution phases of 1 and 3 indicated the stability of these polyanions in solution, in complete agreement with the experimental findings.     

Comparative EXAFS investigation of uranium(VI) and -(IV) aquo chloro complexes in solution using a newly developed spectroelectrochemical cell

The coordination of the U(IV) and U(VI) ions as a function of the chloride concentration in aqueous solution has been studied by U L(III)-edge extended X-ray absorption fine structure (EXAFS) spectroscopy. The oxidation state of uranium was changed in situ using a gastight spectroelectrochemical cell, specifically designed for the safe use with radioactive solutions. For U(VI) we observed the complexes UO2(H2O)5(2+), UO2(H2O)4Cl+, UO2(H2O)3Cl2(0), and UO2(H2O)2Cl3- with [Cl-] increasing from 0 to 9 M, and for U(IV) we observed the complexes U(H2O)9(4+), U(H2O)8Cl3+, U(H2O)(6-7)Cl2(2+), and U(H2O)5Cl3+. The distances in the U(VI) coordination sphere are U-Oax = 1.76+/-0.02 A, Oeq = 2.41 +/- 0.02 A, and U-Cl = 2.71 +/- 0.02 A; the distances in the U(IV) coordination sphere are U-O = 2.41 +/- 0.02 A and U-Cl = 2.71 +/- 0.02 A.     

Simultaneous capillary electrophoretic separation and detection of P(V) and As(V) As heteropoly-blue complexes

A capillary electrophoretic (CE) method was developed for the simultaneous determination of P(V) and As(V). A Mo(VI)-ascorbic acid reagent reacted with a mixture of trace amounts of P(V) and As(V) to form the corresponding heteropoly-blue complexes in 0.05 M acetate buffer (pH 3.5). When 0.05 M malonate buffer was used as a migration buffer, the peaks due to their migrations were well separated in the electropherogram, and the pre-column complex-formation reaction was applied to the simultaneous CE determination of P(V) and As(V) with direct UV detection at 220 nm. With the proposed method, the calibration curves were linear in the concentration range of 5 x 10(-7) - 1 x 10(-4) M, with a detection limit of 1 x 10(-7) M (a signal-to-noise ratio of 3). Interference from foreign ions was also discussed.     

A new volumetric method for the determination of molybdenum(VI)

Summary A new volumetric method has been developed for the determination of molybdenum(VI). The method consists in the reduction of molybdenum(VI) by heating with a slight excess of hydrazine sulphate in 1 to 2 M hydrochloric acid medium for ten minutes on a water bath. The mixture is cooled and the molybdenum(V) obtained determined by titration with a standard solution of ceric sulphate at an overall acidity of 4 N hydrochloric acid, using diphenyl benzidine as indicator and adding 5 ml of syrupy phosphoric acid for 50 ml of the mixture. Alternately the molybdenum(V) can be titrated with a standard solution of ceric sulphate at an overall acidity of 3 N hydrochloric acid using ferroin as indicator and adding 5 ml of syrupy phosphoric acid for 50 ml of the titration mixture. The molybdenum(V) can also be titrated with a standard solution of sodium vanadate in 8 N sulphuric acid medium, using N-phenyl anthranilic acid as indicator. Alternately, the titration with sodium vanadate can be made with diphenyl benzidine as indicator in 4 N acid medium, adding 5 ml of syrupy phosphoric acid and 1 ml of 1.0 M oxalic acid to catalyse the indicator action. The method now proposed is much more convenient than the methods currently available. It is simple because it does not require any costly chemicals or complicated apparatus. Furthermore, it has the advantages of great rapidity and excellent precision.     

Gravimetric determination of cadmium with N-phenylbenzohydroxamic acid

A quantitative gravimetric determination of cadmium in presence of Ag(+), Be(2+), Pb(2+), Mn(2+), Ni(2+), Cu(2+), Zn(2+), Hg(2+), Pd(2+), Ga(3+), Al(3+), Bi(3+), Sb(3+), La(3+), Ti(4+), Zr(4+), V(5+), Mo(6+) and U(6+) was made by selective precipitation with N-phenylbenzohydroxamic acid from a solution containing 6-15 mg of cadmium acetate at pH 5.8-6.5. The precipitate was weighed directly after drying at 110-120 degrees . The cadmium complex is curdy white, granular and melts at 225 degrees. The analytical results indicate the complex to be (C(13)H(10)NO(2))(2)Cd.     

Column chromatographic separation of uranium(VI) and other elements using poly(dibenzo-18-crown-6) and ascorbic acid medium

A selective and very effective separation method for uranium(VI) has been developed by using poly(dibenzo-18-crown-6) and column chromatography. The separations are carried out from ascorbic acid medium. The adsorption of uranium(VI) was quantitative from 0.00002 to 0.006 M ascorbic acid. The elution of uranium(VI) was quantitative with 2.0-8.0 M HCl and 2.0-5.0 M H2SO4. The capacity of poly(dibenzo-18-crown-6) for uranium(VI) was found to be 0.92 +/- 0.01 mmol g(-1) of crown polymer. Uranium(VI) was separated from a number of cations in binary as well as in multicomponent mixtures. The method was extended to the determination of uranium in geological samples. It is possible to separate and determine 5 ppm of uranium(VI) by this method. The method is very simple, rapid, selective and has good reproducibility (approximately +/- 2%).     

Use of N-benzyl-2-naphthohydroxamic acid as a highly selective reagent for solvent extraction and spectrophotometric determination of vanadium(V)

N-Benzyl-2-naphthohydroxamic acid extracts vanadium(V) selectively and quantitatively into chloroform from 2-8.5M hydrochloric acid in the presence of Mo(VI), Zr(IV) and Ce(IV). The extraction takes place quickly and gives a stable reddish-violet extract which shows an absorption maximum at 505 nm with molar absorptivity of (5.34 +/- 0.05) x 10(3) 1.mole(-1).cm(-1). The optimum range for the determination is 2.2-7.4 ppm of vanadium(V) in the final solution. The method has been used for the determination of vanadium in steels.     

Voltamperometric determination of uranium and plutonium in alkaline solutions

The simultaneous determination of U(VI), Pu(VI), Pu(V) in 0.5–4.0 M NaOH has been elaborated by means of classical and differential pulse voltamperometry. U(VI) is determined with a dropping mercury electrode (DME) at the half-wave potential of E_1/2=–0.89 V vs. Ag/AgCl reference electrode due to reduction to U(V). The limiting current or peak heights are proportional to uranium(VI) concentration in the range of 1.3.10^–7–3·10^–4 M U(VI). Deviation from proportionality is observed for higher concentrations due to polymerization of uranates. Pu(VI) and Pu(V) are determined with a platinum rotating electrode at E_1/2=–0.02 V due to the reaction Pu(VI)+e^–»Pu(V) and with DME at E_1/2=–1.1 V due to the reduction to Pu(III). The limiting currents of both Pu(VI) and Pu(V) are proportional to their concentrations in the range of 4·10^–6–1.2·10^–3 M Pu. The determination of U(VI), Pu(VI), Pu(V) is not interfered by the presence of the following salts: 2M NaNO₃, 2M NaNO₂, 1.5M NaAlO₂, 0.5M NaF and ions of Mo(VI), W(VI), V(V), Cu(II). The presence of CrO ₄ ^2– and FeO ₂ ^– ions disturbs the determination of U(VI) in 1–4M NaOH, however, contribution of the reaction Fe(III)+e^–»Fe(II) to uranium reduction peak can be calculated from the height of the second peak Fe(II)+2 e^–»Fe(0).     

The hydrogen salicylate ion as ligand. Complex formation equilibria with dioxouranium (VI), neodymium (III) and lead (II)

The complexation equilibria of the hydrogen salicylate ion, HL(-), have been studied, at 25 degrees C, by potentiometric measurements with a glass electrode in 1 M NaClO4 for uranyl and Nd(III) ions and in 3 M NaClO4 for Pb(II) ion. The ligand concentration (CL) was varied between 10(-3) and 0.05 M. In the system with U(VI) the concentrations ranged between: 10(-3) < or = [U(VI)] < or = 0.01 M, 0.5 < or = CL /[U(VI)] < or = 10 and 10(-2) < or = [H+] < or = 10(-5) M; for neodymium system: 2 x 10(-3) < or = [Nd(III)] < or = 0.01, 1 < or = CL /[Nd(III)] < or = 10 and 10(-2) < or = [H+] < or = 10(-7) M; for lead system: 10(-3) < or = [Pb(II) < or = 3 x 10(-3), 1 < or = CL /Pb(II)] < or = 2 and 10(-5) < or = [H+] < or = 10(-7.3) M. The experimental data have been explained with the formation of UO2HL+, UO2L, UO2(OH)L(-), (UO2)2(OH)L2(-) UO2(HL)L(-), NdHL(2+), NdL(+), Nd(OH)L, PbHL(+), PbL and PbL2(2-). Equilibrium constants are given for the investigated ionic media and at infinite dilution.     

Electronic properties of vanadium-doped TiO2

The electronic properties of vanadium-doped rutile TiO(2) are investigated theoretically with a Hartree-Fock/DFT hybrid approach. The most common oxidation states (V(2+), V(3+), V(4+), and V(5+)) in different spin states are investigated and their relative stability is calculated. The most stable spin states are quartet, quintet, doublet, and singlet for V(2+), V(3+), V(4+), and V(5+) doping, respectively. By comparing the formation energy with respect to the parent oxides and gas-phase oxygen (ΔE), we conclude that V(4+) (ΔE=145.3 kJ mol(-1)) is the most likely oxidation state for vanadium doping with the possibility of V(5+) doping (ΔE=283.5 kJ mol(-1)). The energetic and electronic properties are converged with dopant concentrations in the range of 0.9 to 3.2%, which is within the experimentally accessible range. The investigation of electronic properties shows that V(4+) doping creates both occupied and unoccupied vanadium states in the band gap and V(5+) doping creates unoccupied states at the bottom of the conduction band. In both cases there is a significant reduction of the band gap by 0.65 to 0.75 eV compared to that of undoped rutile TiO(2).     

Electrochemical preparation of the bis(ruthenocenium) dication

The electrochemical oxidation of ruthenocene (1) in CH(2)Cl(2)/[NBu(4)]A, where A = [B(C(6)F(5))(4)](-) or [B(C(6)H(3)(CF(3))(2))(4)](-), gives the dimeric dication [(RuCp(2))(2)](2+), 2(2+), in equilibrium with the 17-electron ruthenocenium ion 1(+). At room temperature the rapid equilibrium accounts for the quasi-Nernstian cyclic voltammetry (CV) behavior (E(1/2) = 0.41 V vs FeCp(2), A = [B(C(6)F(5))(4)](-)). Direct electrochemical evidence for 2(2+) is seen by CV and by bulk electrolysis at 243 K. The bis(ruthenocenium) dication undergoes a highly irreversible two-electron cathodic reaction at E(pc) ca. 0 V. Anodic electrolysis of 1 at 243 K using [B(C(6)H(3)(CF(3))(2))(4)](-) as the supporting electrolyte, followed by cathodic electrolysis of 2(2+), regenerates half of the original 1. Precipitation of 2(2+) occurs when the supporting electrolyte is [B(C(6)F(5))(4)](-), allowing facile isolation of [(RuCp(2))(2)][B(C(6)F(5))(4)](2). A second, unidentified, anodic product also reduces to give back ruthenocene. Digital simulations of the CV curves of 1 at 243 K give a dimerization equilibrium constant of 9 x 10(4) M(-1) for K(eq) = [(RuCp(2))(2)(2+)]/2 [RuCp(2)](+) in CH(2)Cl(2)/0.1 M [NBu(4)][B(C(6)F(5))(4)].