Determination of selenium(IV) and other forms of selenium dissolved in sea water by anion-exchange resin loaded with sulfonic acid derivative of bismuthiol-II and hydride generation atomic-absorption spectrometry

Summary A sulfonic acid derivative of bismuthiol-II (bisIIS) was synthesized from 4-hydrazinobenzene sulfonic acid and carbon disulfide. Selenium(IV) was adsorbed selectively and quantitatively on the anion-exchange resin loaded with bis-IIS. Selenium adsorbed on the resin was eluted by the use of penicillamine and determined by hydride generation atomic absorption spectrometry (hydride generation/AAS). Selenium(VI) and other forms of selenium, which were not adsorbed onto the resin, were collected on the resin after digestion with nitric acid followed by reduction with hydrochloric acid. Separative preconcentration of selenium(IV), selenium(VI) and other forms of selenium in 0.5 mol/l sodium chloride could be carried out successfully by the proposed procedures. However, in the case of estuarial sea water containing a large quantity of organic substances, selenium(IV) could not be separated, because organic substances interfered with the reduction of selenium(VI) to selenium(IV) by the use of hydrochloric acid. Selenium(IV) and total amount of selenium(VI) and other forms of selenium dissolved in polluted sea water samples were determined by the proposed procedures.

---

Bestimmung von Selen (IV) und anderen in Meereswasser gelösten Selenformen mit Hilfe eines mit dem Sulfonsäurederivat von Bismuthiol-II beladenen Anionenaustauschers und der Hydrid-AAS

     

A chelate-forming resin bearing mercapto and azo groups and its application to the recovery of mercury(II)

A new chelate-forming resin bearing mercapto and azo groups was prepared from a common anion-exchange resin by treatment with azothiopyrine disulphonic acid (ATPS). ATPS resin was very stable and highly effective for the collection of mercury(II) by the batch and column methods. In the column method, the amount of mercury(II) in solution could be reduced to below 0.5 mug/l. The mercury(II) adsorbed could be eluted with thiourea solution, and the resin could be used repeatedly.     

Anion-exchange resin modified with bismuthiol-II, as a new functional resin for the selective collection of selenium(IV)

A functional resin for the collection of selenium(IV) has been prepared simply by the conversion of a common ion-exchange resin with bismuthiol-II which has three functional properties, namely the capabilities of selective reaction with selenium(IV), ion-exchange reaction with ion-exchange resin and strong physical sorption to the ion-exchange resin matrix. The binding ratio of selenium(IV) to bismuthiol-II on the resin was confirmed to be 1:4. The reaction was represented as follows: 4RSH + H(2)SeO(3)--> R-S-Se-S-R + R-S-S-R + 3H(2)O. Highly selective sorption of selenium(IV) was achieved, based on the formation of stable selenotrisulphide on the resin. Selenium(IV) sorbed on bismuthiol-II resin was eluted effectively with 8-13M nitric acid or some thiols, such as cysteine and penicillamine. In the cases of thiols, the elution of selenium was found to be also based on the formation of selenotrisulphide, and the bismuthiol-II resin was regenerated. Satisfactory results were obtained when this resin was applied to the determination of selenium(IV) in river, estuarine or sea water samples.     

Ion-exchange selectivity of anion exchange resin modified with polystyrenesulfonic acid.

In order to change the ion-exchange selectivity of anion-exchange resin, the surface of a gel-type anion exchange resin was modified with anionic polyelectrolyte, polystyrenesulfonic acid. Using this modified resin, the ion-exchange rate of nitrate was little decreased, but that of sulfate was evidently decreased. It is considered that the ion-exchange reaction of the multivalent anion is suppressed by the greater electrostatic repulsive force against the modification layer than that against the monovalent anion. Thus, this modified resin may be suitable for the selective separation of monovalent anions. The influence of the modified condition on the ion-exchange rate was examined. Furthermore, this modified resin was used to separate nitrate ions from sulfate ions in the aqueous solution.     

A new method of plutonium speciation in sea water

A new method of plutonium speciation in large volume of sea water was developed by using adsorption of Pu(IV)-Xylenol Orange chelate and Pu-Arsenazo chelate on XAD-2 resin, respectively. The tetravalent plutonium ion reacts selectively with Xylenol Orange in acid solution and that adsorbed on XAD-2 resin. Total plutonium can be collected onto the resin in the form of its Arsenazo-III complex. The determination of plutonium then was carried out by alpha-ray spectrometric method after decomposition of organic complexes and ion exchange separation. The present method is confirmed for convenient and rapid preconcentration procedure for plutonium shipboard chemistry.     

Separation and concentration of some platinum metal ions with a new chelating resin containing thiosemicarbazide as functional group

A new chelating ion-exchange resin containing thiosemicarbazide as functional group and based on macroreticular polystyrene-divinylbenzene (8%) has been prepared. Its sorption characteristics for palladium(II), platinum(IV), rhodium(III), ruthenium(III) and iridium(III) have been studied. These platinum metal ions can be quantitatively separated by sorption on this chelating resin and selective elution. The resin is highly stable in acid and alkaline solution.     

Anion-exchange separation of plutonium in hydrochloric-hydrobromic acid media

Plutonium can be rapidly and selectively separated from the elements that interfere in its radiochemical determination, by the use of hydrobromic acid in a hydrohalic acid anion-exchange separation procedure. Plutonium(IV) and (VI) are adsorbed onto the resin column from 9M hydrochloric acid, interfering elements such as americium and thorium are washed from the column with 9M hydrochloric acid, and the plutonium is reduced to plutoniurn(III) and washed from the column with 11M hydrobromic acid. Interfering elements such as uranium and neptunium, which are adsorbed onto the column from 9M hydrochloric acid, are retained there during the hydrochloric and hydrobromic acid washes. This system would also appear to provide the means for effectively separating plutonium from those elements that commonly interfere in such chemical methods of analysis as redox titration.     

Determination of cadmium in uranium by ion exchange and square-wave polarography

Traces of cadmium in uranium and its compounds can be determined by ion-exchange separation and square-wave polarography. With a small column of anion-exchange resin, cadmium can be separated from uranium and recovered quantitatively from hydrochloric acid solution, Separations of cadmium from uranium are not perfect but are sufficient for the determination of traces of cadmium by square-wave polarography. The lower limit of the method is 0.01 p.p.m. of cadmium.     

Synthesis and properties of strongly basic acrylate polyfunctional anion-exchange resin for uranium extraction

Some studies on the synthesis of strongly basic acrylate polyfunctional anion-exchange resins designed for the extraction of uranium from uranium ore leaching solutions were performed. The alkylation reaction conditions providing the synthesis of a polyfunctional anion-exchange resin with 55% of strongly basic groups were determined. Its sorption properties were studied using model solutions. The capacity of the alkylated polyfunctional anion-exchange resin with respect to uranium was shown to be highly competitive with foreign analogues using the comparative analysis of its ion-exchange characteristics with the parameters of known ion-exchange resins.     

Kinetic-spectrophotometric determination of selenium in natural water after preconcentration of elemental selenium on activated carbon

A simple, accurate, sensitive and selective method is described for rapid determination of ultra-trace quantities of selenium. Selenium (IV) was collected on activated carbon after reduction to elemental Se by l-ascorbic acid. The collected selenium was then determined based on its accelerating effect on the oxidation reaction of methyl orange with bromate in acidic media. Total amount of Se(IV) and Se(VI) were collected on AC after their reduction by hydrazine. Se(IV), Se(VI) and total selenium could be determined by the method. Selenium in the range 10-10 000 ng could be determined by the method. The method was used to the determination of Se(IV), Se(VI) and total selenium in natural water with satisfactory results.     

Local structures of ions at ion-exchange resin/solution interface

The local structures of Cl- and Br- in anion-exchange resins have been studied by X-ray absorption fine structure (XAFS), and separation selectivity is discussed on the basis of results. When two different anion-exchange resins having trimethylammonium and dimethylammonium groups as anion-exchange groups are employed for ion-exchange experiments, slightly higher Br- selectivity has been obtained with the former. XAFS has indicated that the average hydration numbers for a given anion is not affected by the structure of the ion-exchange group, but that the extent of ion-association between the anion and the ion-exchange groups depends on the type of the ion-exchange group. Shorter interaction distance (and in turn stronger ion-association) has been confirmed for the dimethylammonium-type resin, and is consistent with lower Br- selectivity of this resin.     

Separation and determination of selenium(IV) in environmental water samples by an anion-exchange resin modified with bismuthiol-II and diaminonaphthalene fluorophotometry

Summary Selenium(IV) in environmental water samples was determined fluorometrically following its collection by the use of a new functional resin. The resin was easily prepared from an anion-exchange resin by modification with bismuthiol II. A highly selective adsorption of selenium(IV) was achieved by the formation of stable selenotrisulfide from bismuthiol II and selenium(IV) on the resin. The method was successfully employed for the determination of Se in river water and waste water.

---

Trennung und Bestimmung von Selen(IV) in Umwelt-Wasserproben mit Hilfe eines Bismuthiol II-modifizierten Anionenaustauschers und der Fluorophotometrie mit Diaminonaphthalin

Zusammenfassung Das Selen wurde mit Hilfe eines mit Bismuthiol II modifizierten Anionenaustauschers angereichert und fluorometrisch bestimmt. Die Adsorption, die auf der Bildung eines stabilen Selentrisulfids beruht, ist sehr selektiv. Das Verfahren wurde mit gutem Erfolg zur Selenbestimmung in Fluß- und Abwasser eingesetzt.

     

Determination of manganese in uranium by ion exchange and square-wave polarography

Traces of manganese in uranium and its compounds can be determined by ion-exchange separation and square-wave polarography. When a 9 M hydrochloric acid solution of the sample is introduced into a column of strongly basic anion-exchange resin, manganese can be quantitatively separated from uranium by cluting with 9 M hydrochloric acid. The determination of the separated manganese by square-wave polarography is performed in 1 M potassium hydroxide-0.4 M triethanolamine solution with an excellent sensitivity. The lower limit of the method is 0.5 p.p.m. of manganese.     

Determination of selenium and tellurium in air by atomic-absorption spectrometry

Elemental selenium and tellurium, and gaseous inorganic forms of Se(IV), Se(VI), Te(IV) and Te(VI) have been determined after their adsorption on gold-coated beads. After leaching, with water and dilute hydrochloric and nitric acids, the different chemical species in each acid fraction were separated with an anion-exchange resin (Bio-Rad AG-1X8) and a cation-exchange resin (Amberlite IR-120 Plus) by varying the acidity of the leaching agent. Subsequent analysis was by graphite-fumace atomic-absorption spectrometry. The lower detection limit for Se and Te was 0.03 ng/M(3) with a precision of +/- 5%. The average amounts of selenium in interior and exterior air samples were about 4.73 and 1.93 ng/m(3) respectively. For tellurium the corresponding values were about 0.78 and 0.24 ng/m(3).     

Sorption of protons and metal ions from aqueous solutions by a strong-base anion-exchange resin loaded with sulphonated azo-dyes

Two sulphonated azo-dyes, which bear a nitrogen donor atom in the diazo group and are known to complex many heavy metal ions in aqueous solution, have been found to be sorbed by a strong-base anion-exchange resin (Dowex 1-X8) simply by ion-exchange. The resin containing the dyes behaves like a chelating resin, able to sorb copper(II) and nickel(II) from aqueous solution, if the proper conditions are chosen. The acidity, ionic composition and volume of the aqueous solution, and the amount and nature of the sorbed ligand are the factors which determine the fraction of metal ion sorbed when the batch technique is used. The experimental results are interpreted by using a model of the resin based on the Donnan equilibrium concept, which allows prediction of the sorption conditions on the basis of some independently determined quantities, such as the protonation and complex formation constants in aqueous solution, and the activity of the counter-ion in the resin phase. The exchange of protons between the resin and the aqueous solution can also be explained with this model.     

Radiochemical purification of microgram and sub-microgram amounts of beryllium

A method is presented for the separation and radiochemical purification of microgram and tracer amounts of beryllium from solutions. It is a four-stage ion-exchange procedure consisting of (1) selective adsorption of the beryllium onto NaDAP resin and its elution with ammonium fluoride, (2) adsorption of the fluoroberyllate complex onto an anion-exchange column and elution of the beryllium with hydrochloric acid, (3) adsorption and selective elution of the beryllium on a cation-exchange column and (4) a pass through an anion-exchange column in concentrated hydrochloric acid. The method is quantitative and requires no carrier. Decontamination factors from most radionuclides tested were greater than 10,000. The method can be used to determine beryllium-10 in environmental materials.     

Macroporous poly(glycidyl methacrylate-triallyl isocyanurate-divinylbenzene) matrix as an anion-exchange resin for protein adsorption.

A novel macroporous poly(glycidyl methacrylate-triallyl isocyanurate-divinylbenzene) matrix was prepared by a radical suspension copolymerization. The matrix contained epoxy groups, so diethylaminohydroxypropyl groups were coupled to the matrix, leading to an anion-exchange resin. We studied the components, surface and pore structures of the anion-exchange resin by Fourier transform infared spectroscopy and scanning electron microscopy (SEM). SEM observations showed that the resin abounded in macropores as large as 3 to 8 microns both in the surface and the interior. The back-pressure of the column packed with the resin was modest even at a high flow-rate (60.2 cm/min). Then, bovine serum albumin (BSA) was used as a model protein to examine the adsorption properties of the anion-exchange resin. The results showed that under optimum conditions the resin had a capacity as high as 22.8 mg BSA/g wet resin, or 68.7 mg/g dry resin. The adsorbed protein could be desorbed by increasing the liquid phase ionic strength. Most importantly, the matrix had little nonspecific adsorption for BSA before introducing the ion-exchange groups.     

Chelate-forming resins prepared by modification of anion-exchange resins

The properties of some chelate-forming resins prepared from common anion-exchange resins by treatment with reagents bearing chelate-forming and ion-exchange groups have been studied. A resin prepared from the sulphonic acid derivative of dithizone (DzS) was found to be superior to other chelate-forming resins. Resins loaded with DzS, tetraphenylporphinetrisulphonic acid or zincon were stable in 1M sodium chloride. Resins prepared from sulphonazo III, arsenazo III, thiosalicylic acid or p-mercaptobenzenesulphonic acid were found to be unstable when exposed to sodium chloride solution.     

Separation and determination of selenium in rocks, marine sediments and plankton by direct evolution with the bromide-condensed phosphoric acid reagent

A new method is presented for the quantitative separation and determination of selenium by direct evolution with the bromide-condensed phosphoric acid reagent (Br(-)-CPA) from rocks, marine sediments and plankton. In the reaction with the Br(-1)-CPA, selenium(IV) and (VI) in the solid samples are evolved as selenium tetrabromide, and can be collected in an absorbing solution of 0.3M hydrochloric acid and 06M perchloric add (1:1), and then determined spectrophotometrically with 4-substituted o-phenylenediamines followed by the extraction of the resulting 5-substituted piazselenol into toluene. Elemental selenium and selenide do not react with the Br(-)-CPA, but can be determined after oxidation to selenite with potassium iodate. Therefore, successive distillations, the first with Br(-)-CPA and the second with IO(3)(-)-Br(-)-CPA, give a satisfactory means of diflerential determination of selenium(IV) and (VI), and elemental selenium and selenide. This method can be successfully applied for the separation of selenium in the neutron-activation analysis of standard rock samples, marine sediments and plankton, giving good and reliable results.     

Separation of bismuth from lead, copper and other elements by means of anion exchange

The anion-exchange behaviour of bismuth and various other elements has been investigated in media consisting of methyl glycol and nitric acid. Through the determination of the distribution coefficients in such mixtures, a method for the anion-exchange separation of bismuth from many metal ions has been developed. A mixture of 90% methyl glycol and 10% 5M nitric acid is a suitable medium for this separation on the strongly-basic anion exchanger Dowex 1, X8. Only bismuth, thorium and lanthanum are strongly retained on the resin in these conditions. All other elements investigated, such as lead, copper, iron, etc., are either only weakly adsorbed or are not absorbed. By means of this ion-exchange procedure, a series of analyses of copper-base alloys for bismuth has been carried out. The results show that this method can be used successfully for the quantitative isolation of bismuth from such materials. The final determination of bismuth in the eluates is performed by complexometric titration.