An indirect atomic-absorption method for the determination of selenium

Because of the difficulty in determining selenium directly, an indirect atomic-absorption method has been developed, based on two selective reactions that lead to the formation of the Pd(DanSe)(2)Cl(2) complex and measurement of the palladium absorption. Reaction conditions, separation techniques, effect of foreign ions, instrumental conditions and sample analysis in the sub-ppm range are described. The method is more sensitive than existing atomic-absorption methods for selenium.     

Rapid determination of selenium and tellurium by atomic-absorption spectrophotometry

A rapid method has been developed for the determination of selenium and tellurium in geological and biological samples. It involves acid digestion of the sample with mineral acids, addition of arsenic as a carrier, reduction of arsenic to co-precipitate selenium and tellurium, dissolution of the precipitate in dilute nitric acid and subsequent determination of selenium and tellurium by conventional atomic-absorption spectrophotometry. Selenium and tellurium have been measured on a routine basis, down to 0.1 ppm.     

Trace metal analysis of rocks by flameless atomic-absorption spectrometry with a metal micro-tube atomizer

Flameless atomic-absorption spectrometry with a metal micro-tube atomizer has been studied. The element to be determined was atomized by electrical heating of the micro-tube in an inert atmosphere within a glass chamber. A detailed study of the atomic-absorption characteristics of the micro-tube atomizer is presented. The absolute sensitivities were 2.6 x 10(-12), 2.9 x 10(-11), 2.5 x 10(-10), 1.1 x 10(-10) and 1.4 x 10(-10)g for copper, cobalt, aluminium, palladium and selenium, respectively. The interferences of cations were studied for determination of cobalt and copper. Cobalt and copper in rock samples were determined in order to evaluate the metal micro- tube atomizer.     

Determination of selenium in ores, concentrates and related materials by graphite-furnace atomic-absorption spectrometry after separation by extraction of the 4-nitro-o-phenylenediamine complex

A method for determining approximately 0.01 mug/g or more of selenium in ores, concentrates, rocks, soils, sediments and related materials is described. After sample decomposition selenium is reduced to selenium(IV) by heating in 4M hydrochloric acid and separated from the matrix elements by toluene extraction of its 5-nitropiazselenol complex from approximately 4.2M hydrochloric acid. After the extract has been washed with 2% nitric acid to remove residual iron, copper and chloride, the selenium in the extract is oxidized to selenium(VI) with 20% bromine solution in cyclohexane and stripped into water. This solution is evaporated to dryness in the presence of nickel, and selenium is ultimately determined in a 2% v/v nitric acid medium by graphite-furnace atomic-absorption spectrometry at 196.0 nm with the nickel functioning as matrix modifier. Common ions, including large amounts of iron, copper and lead, do not interfere. More than 1 mg of vanadium(V) and 0.25 mg each of platinum(IV), palladium(II), and gold(III) causes high results for selenium, and more than 1 mg of tungsten(VI) and 2 mg of molybdenum(VI) causes low results. Interference from chromium(VI) is eliminated by reducing it to chromium(III) with hydroxylamine hydrochloride before the formation of the selenium complex.     

Simple method for determination of selenium in biological materials by flameless atomic-absorption spectrometry using a carbon-tube atomizer

A method for determination of selenium in biological materials by flameless atomic-absorption spectrometry using a carbon-tube atomizer is described. The sample is burned by an oxygen-flask combustion procedure, the resulting solution is treated with a cation-exchange resin to eliminate interfering cations, the selenium is extracted with dithizone in carbon tetrachloride and the resulting selenium dithizonate is combined with nickel nitrate in the carbon tube to enhance the sensitivity for selenium and avoid volatilization losses. The method measures selenium concentrations as low as 0.01 mug/g with a relative standard deviation of 8%.     

Determination of tellurium in copper, lead and selenium by atomic-absorption spectrometry after extraction of the trioctylmethylammonium-tellurium bromide complex

A simple, rapid and sensitive combined solvent extraction and atomic-absorption spectrometric method has been developed for the determination of tellurium in copper, lead, selenium and blister copper. Tellurium is extracted as the trioctylmethylammonium-tellurium(IV) bromide complex into butyl acetate and determined by flame atomic-absorption spectrometry of the extract. As little as 1 mug of tellurium in a sample can be determined. The extraction of tellurium from hydrobromic acid solution with trioctylamine has also been investigated.     

Determination of gold in silver, copper, lead, selenium and anode slime by atomic-absorption spectrometry

A simple and sensitive combined solvent-extraction and atomic-absorption spectrometric method has been developed for the determination of gold in silver, copper, lead, selenium and anode slime. Samples are decomposed with hydrochloric and nitric acids, and gold is extracted as the trioctylmethylammonium-gold bromide complex and determined by atomic-absorption spectrometry by direct spraying of the extract into the flame. Optimal conditions for the extraction and determination of gold have been established. As little as 0.5 mug of gold in a sample can be determined. The extraction of gold from hydrochloric or hydrobromic acid solution with trioctylamine or trioctylmethylammonium chloride (or bromide) has also been investigated.     

Influence of volatile hydride-forming elements on antimony determination by atomic-absorption spectrometry with hydride-generation

A study was undertaken to determine the interfering effects of arsenic, bismuth, germanium, lead, selenium, tin and tellurium on trace determination of antimony by atomic-absorption spectrometry with hydride-generation. A 1% NaBH(4) solution was used as reductant and a small amount of oxygen was added to the hydrogen produced, to support the combustion and atomization of SbH(3). The interference from selenium in the determination of antimony is removed if potassium iodide-ascorbic acid solution or copper sulphate is added to the sample solution. The interference of tin and tellurium can also be avoided by adding potassium iodide-ascorbic acid solution. A possible interference mechanism is discussed.     

Electrothermal atomization of palladium stabilized selenium in the presence of phosphate

The interference caused by phosphate (as Na₂HPO₄) in the electrothermal atomic absorption determination of selenium was investigated for reduced and unreduced palladium nitrate modifiers. An increase of the amount of phosphate in the sample was accompanied with increasing losses of selenium. Kinetic parameters of the selenium atomization were calculated for various amounts of phosphate interference. These results were compared with previous findings for palladium stabilized selenium and the sulfate interference observed for this system. The increasing chemical interference is due to phosphorous replacing the selenium bound by palladium. The phosphorus thus makes the palladium surface unavailable for the stabilization of selenium.     

An automated submicrogram determination of selenium in vegetation by quartz-tube furnace atomic-absorption spectrophotometry

An automated method for the determination of submicrogram amounts of selenium in vegetation is described. A weighed sample of vegetation is digested with a 4:1 nitric-perchloric acid mixture, and made up to a known volume. The digested sample is placed in a Technicon sampler and reacted with sodium borohydride solution. The selenium converted into the gaseous hydride is swept by an argon stream into a gas-liquid separator. The mixed gas stream is passed through a heated quartz cell, positioned in the light-path of an atomic-absorption spectrophotometer. The absorption by the atomized selenium is recorded. The method is capable of analysing 50 samples a day by the use of a calibration curve or 25 a day by the standard addition technique. A relative standard deviation of better than 10% and a detection limit of 0.025 microg/g were obtained.     

Atomic-absorption spectrometric determination of catalytic components (Pd,Ti, and Cu) in mixtures based on phenol

Procedures for the determination of palladium, titanium, and copper in organic reaction mixtures based on phenol were developed with the use of atomic absorption spectrometry and various sample preparation techniques: quantitative back extraction of the metals with a 2 M HCl solution; autoclave digestion in an acid mixture of HClO₄, HF, and HNO₃; and decomposition in a muffle furnace. The accuracy of analysis was demonstrated by a comparison between the results of the atomic-absorption spectrometric determination of the elements obtained with the use of all of the sample preparation techniques proposed and the standard addition method. The relative standard deviation in the determination of palladium, copper, and titanium was 7–10%.     

Determination of silver in copper and lead metals and alloys and in zinc and selenium by atomic-absorption spectrometry after separation by extraction of the tri-n-octylmethylammonium-silver bromide complex

A simple and sensitive combined solvent extraction and atomic-absorption spectrometric method has been developed for the determination of silver in copper and lead metals and alloys and in zinc and selenium. Optimal conditions have been established for the extraction and determination of silver. Silver is extracted as the tri-n-octylmethylammonium-silver bromide complex and determined by atomic-absorption spectrometry by spraying the extract directly into the flame. As little as 0.2 mug of silver in a sample can be determined.     

Comparison of four digestion methods for the determination of selenium in bovine liver by hydride generation and atomic-absorption spectrometry in a flow system

A flow system for hydride generation and atomic-absorption spectrometry is described, and the results from the optimization of the equipment for selenium determination are reported. For a sample volume of 0.6 ml the limit of detection for selenium was 0.1 mug l . and the imprecision less than 1% RSD at the 10-mug l . level. Four digestion procedures for selenium in bovine liver have been tested. All procedures gave concordant results, provided that the standard-additions method was used. The accuracies of the overall analytical procedures were estimated by comparison with results from neutron-activation analysis and analysis of NBS Bovine Liver, No. 1577. These comparisons proved that the accuracies of the procedures described in this paper are good.     

Application of matrix-modification in determination of thallium in waste water by graphite-furnace atomic-absorption spectrometry

A method has been developed for the determination of thallium in waste water at the ng ml level by graphite-furnace atomic-absorption spectrometry. If microgram amounts of palladium or platinum are used as a matrix modifier, the ashing temperature for thallium can be raised to 1000 degrees , and the interference of halides and mineral acids is greatly reduced. The relative standard deviation found was 2% (9 replicate determinations) at the 8-ng ml thallium level, and the detection limit 1 ng ml .     

Direct determination of selenium in sub-milligram amounts of human sperm nuclei by electrothermal atomic absorption spectrometry

In the sperm nuclei selenium is present only in form of a single selenoenzyme, the sperm nuclei glutathione peroxidase (snGPx), involved in processes to secure the structural stability of the nuclear chromatin. As changes in its expression may affect sperm function, its analysis is of interest in the diagnosis of male infertility. A method has been developed which by removal of the other selenium compounds present in other sperm components and measurement of the concentration of selenium in the purified human sperm nuclei by electrothermal atomic absorption spectrometry (ETAAS) allows the quantitative analysis of this enzyme. As the purification resulted in yields in the range of only 150 μg nuclei/ml semen and the amount of purified nuclei in the sample could only be determined by weighing, the main analytical difficulty arose from the accurate determination of the sample masses. The procedure includes preparation of purified sperm nuclei, measurement of the sample mass and direct selenium analysis in the suspensions of the compact sperm nuclei without prior digestion of the matter, using a palladium matrix modifier, a spectrometer with Zeeman background correction and a graphite atomizer with L'vov platform. The detection limit for the determination of selenium was 8.4 pg. The quality control of the results by means of instrumental neutron activation analysis (INAA) showed the reliability of the selenium determination by ETAAS. The procedure proved to be suitable to analyze selenium and thus snGPx in very small amounts of purified human sperm nuclei.     

Optimization of the determination of selenium by atomic-absorption spectrometry: Comparison of two hydride generation systems

Two commercially available systems for the determination of selenium by hydride-generation and atomic-absorption spectrometry were compared. Chemical and physical parameters were optimized both for an electrothermally heated closed atom-cell method and a flame-heated open-cell technique. Both systems were evaluated with respect to performance and applicability to determination of traces of selenium.     

Optimization of a chemical modifier in the determination of selenium by graphite furnace atomic absorption spectrometry and its application to wheat and wheat flour analysis.

A method for the determination of total selenium in wheat and wheat flour using graphite furnace atomic absorption spectrometry (GFAAS) with palladium/ascorbic acid as a chemical modifier was studied. The effects of nickel nitrate, palladium/ascorbic acid, and palladium/magnesium nitrate as chemical modifiers on the sensitivity in the determination of selenite, selenate and selenomethionine by GFAAS were compared. The palladium/ascorbic acid modifier was used for the determination of total selenium in wheat and wheat flour, because the oxidation states of the selenium ion are not important in the determination. The detection limit was estimated to be 1 microg L(-1) (calculated as 3sigma of the blank); the calibration curve was linear for the concentration range 5 - 50 microg L(-1) and the recovery range was 96.66 - 101.80%. The optimal ashing and atomizing temperatures were 1300 degrees C and 2250 degrees C, respectively. The proposed method was successfully applied to the determination of total selenium in wheat and wheat flour.     

Non-dispersive atomic-fluorescence spectrometry of trace amounts of bismuth by introduction of its gaseous hydride into a premixed argon (entrained air)-hydrogen flame

A method has been developed for the determination of bismuth by generation of its gaseous hydride and introduction of the hydride into a premixed argon (entrained air)-hydrogen flame, the atomic-fluorescence lines from which are all detected by use of a non-dispersive system. The detection limit is 5 pg/ml, or 0.1 ng of bismuth, but the reagent blank found in a 20-ml sample volume was approximately 2 ng of bismuth. Analytical working curves obtained by measuring peak-heights and integrated peak-areas of the signals are linear over a range of about four orders of magnitude from the detection limit. Perchloric, phosphoric and sulphuric acids up to 2.0M concentration give no interference, but nitric acid gives slight depression of the signal. The presence of silver, gold, nickel, palladium, platinum, selenium and tellurium in 1000-fold ratio to bismuth causes pronounced depression of the signal, whereas mercury and tin slightly enhance the atomic-fluorescence signal. The method has been applied to the determination of bismuth in aluminium-base alloys and sulphide ores with use of the standard additions method. The results are in good agreement with those obtained by flame atomic-absorption spectrometry and optical emission spectrometry with an inductively coupled plasma.     

平台石墨炉原子吸收法直接测定高温镍基合金中硒

研究了基体改进剂及其用量,硒的灰化、原子化和出现温度,以及近20种共存离子的干扰。采用镍和钯混合液作基体改进剂,硒的灵敏度高,抗干扰能力强,不需要分离样品基体,可以采用平台石墨炉法直接测定高温镍基合金中硒。     

Ascorbic acid as a matrix modifier for determination of tin in concentrated boric acid solutions by electrothermal atomic-absorption spectrometry

It has been found that the atomic-absorption signal for tin is reduced in the presence of 5 micro1 of 0.05-0.30M boric acid at STPF-conditions. It has been proposed that the reason for the boron interferences is the formation of SnB(g) at the atomization stage. In the presence of palladium chloride the interferences from 0.2M boric acid are reduced by a factor of 1.3. The interferences are reduced most effectively when the sample is atomized from a polycrystalline graphite platform or in the presence of ascorbic acid. The interference of up to 0.2M boric acid can be suppressed and the area of the tin signal doubled. It is proposed that the observed phenomenon is connected with the bonding of boron as non-volatile B(4)C. Ascorbic acid is the most effective matrix modifier for the determination of different trace elements in boron compounds.