Contributions to the basic problems of complexometry-XXV Determination of rare earths and phosphate without separation

A new method for coraplexometric determination of rare earths (RE) and phosphate without prior separation is described. It is based on indirect determination of RE by back-titration of an excess of DTPA with zinc solution, with Xylenol Orange as indicator. After the titration an excess of La-EDTA complex solution is added and the solution is titrated again with zinc at 40-50 degrees . During this titration lanthanum is displaced from its complex and precipitated as phosphate: LaY(-) + Zn(2+)+ PO(4)(3-) = LaPO(4) + ZnY(2-). The consumption of zinc solution corresponds to the amount of phosphate.     

Radiochemische Bestimmung von Plutonium in Urin bei Gegenwart von Komplexen Dekorporationsmitteln

The interfering effect of DTPA or EDTA on the coprecipitation of Pu from urine with Ca(Mg)-phosphate is cancelled nearly by adding an excess of Ni²⁺ (about 1.8 g/l) to the urine samples before precipitating. After subsequent extraction with Alamine-336 (10% in xylene), reextraction with 10N HCl/NH₄I, and electrodeposition on stainless steel, the recoveries of Pu are about 70% in comparison with 85% in absence of DTPA or EDTA.      

Selectivity enhancements for the determination of thorium by flow-injection analysis through the formation of the Th-DTPA-HQS fluorescent ternary complex

Addition of diethylenetriaminepentaacetic acid (DTPA) to the fluorescent binary complex of thorium and 8-hydroxyquinoline-5-sulfonic acid (HQS) forms the Th-DTPA-HQS fluorescent ternary complex. The formation of this ternary complex enhances the selectivity for the determination of thorium. Excesses of DTPA and HQS are used as reagents in flow-injection analysis to detect thorium. The excess DTPA effectively masks potentially interfering ions by preventing the formation of fluorescent binary metal-HQS complexes. The presence of lanthanides and transition metals does not interfere with the thorium detection with this method (the ratio of molar intensity for metals to molar intensity for thorium is <0.3% with the exception of lutetium, for which molar intensity ratio is 1.34%). The detection limit for thorium is 12 ng ml(-1).     

Indirect determination of the sum of chelons in drinking- and ground-waters by anodic stripping voltammetry

The complexing ligand EDTA can be determined as its complex with bismuth by indirect anodic stripping voltammetry down to 0.1 μg/L without a concentration step. Interfering copper and excess bismuth have to be removed by cation exchange, although in presence of these metals EDTA can be determined down to 0.5 μg/L only. If NTA, EDTA, and DTPA are present simultaneously, the accumulation curves for the corresponding bismuth-complexes can overlap, preventing a separate determination of the three chelons. Due to the interaction of NTA and DTPA with soil normally only EDTA is present in ground-waters. Similarly, EDTA also dominates in surface-waters. Thus it seems to be sufficient to determine the sum of the three chelons as EDTA (index of bismuth-complexation) using suitable electrochemical conditions.     

Indirect determination of the sum of chelons in drinking- and ground-waters by anodic stripping voltammetry

The complexing ligand EDTA can be determined as its complex with bismuth by indirect anodic stripping voltammetry down to 0.1 μg/L without a concentration step. Interfering copper and excess bismuth have to be removed by cation exchange, although in presence of these metals EDTA can be determined down to 0.5 μg/L only. If NTA, EDTA, and DTPA are present simultaneously, the accumulation curves for the corresponding bismuth-complexes can overlap, preventing a separate determination of the three chelons. Due to the interaction of NTA and DTPA with soil normally only EDTA is present in ground-waters. Similarly, EDTA also dominates in surface-waters. Thus it seems to be sufficient to determine the sum of the three chelons as EDTA (index of bismuth-complexation) using suitable electrochemical conditions. Received: 9 September 1996 / Revised: 2 December 1996 / Accepted: 11 January 1997     

Potentiometric determination of iron with DTPA in the presence of a large amount of aluminium

Potentiometric determination of iron with DTPA at pH 1.6 (platinum and calomel electrodes) permits determination of iron in the presence of aluminium up to an Al:Fe ratio of 70. Aluminium is determined indirectly by addition of excess of DCTA, adjustment to pH 5, and back-titration with iron(III) chloride.     

Thermodynamic, spectroscopic, and computational studies of lanthanide complexation with diethylenetriaminepentaacetic acid: temperature effect and coordination modes

Stability constants of two DTPA (diethylenetriaminepentaacetic acid) complexes with lanthanides (ML(2-) and MHL(-), where M stands for Nd and Eu and L stands for diethylenetriaminepentaacetate) at 10, 25, 40, 55, and 70 °C were determined by potentiometry, absorption spectrophotometry, and luminescence spectroscopy. The enthalpies of complexation at 25 °C were determined by microcalorimetry. Thermodynamic data show that the complexation of Nd(3+) and Eu(3+) with DTPA is weakened at higher temperatures, a 10-fold decrease in the stability constants of ML(2-) and MHL(-) as the temperature is increased from 10 to 70 °C. The effect of temperature is consistent with the exothermic enthalpy of complexation directly measured by microcalorimetry. Results by luminescence spectroscopy and density functional theory (DFT) calculations suggest that DTPA is octa-dentate in both the EuL(2-) and EuHL(-) complexes and, for the first time, the coordination mode in the EuHL(-) complex was clarified by integration of the experimental data and DFT calculations. In the EuHL(-) complex, the Eu is coordinated by an octa-dentate H(DTPA) ligand and a water molecule, and the protonation occurs on the oxygen of a carboxylate group.     

Comparative study of the masking effect of various complexans in the spectrophotometric determination of uranium with arsenazo III and chlorophosphonazo III

Results are presented for the masking of 35 elements with the complexans DTPA, EGTA and TTHA in the spectrophotometric determination of uranium(VI) with Arsenazo III at pH 1.8 +/- 0.2 and with Chlorophosphonazo III at pH 1.1 +/- 0.2. The complexans EDTA and DCTA were found to be less suitable because at low pH they tended to precipitate. DTPA is shown to be especially attractive for masking other elements in the determination of uranium(VI) at low pH.     

Amperometric complex-formation titration of traces of alkaline earths

Alkaline earth metals were determined in microgram quantities by complexometric titration with EDTA, EGTA and DTPA. The end-point was detected by following the anodic wave of the chelating agent at the rotating mercury electrode. All the alkaline earths can be titrated at the microgram level with reasonable accuracy, and calcium may be titrated with EGTA in the presence of a 1000-fold excess of magnesium.     

Radiation effects on the separation of lanthanides and transplutonides by the TALSPEAK-type extraction

Effects of radiation on the extraction system composed of DEHPA extractant and DTPA aqueous solution containing nitrate were studied by measuring distribution ratios of Am(III) and Nd(III) with the extractant and DTPA solution either one of which was irradiated with⁶⁰Co γ-rays or the organic—aqueous mixed phase irradiated under continuous stirring. The irradiation causes an increase of Df and a decrease of the Nd/Am separation factor β, to an especially large extent in the mixed phase system. These effects are due firstly to the radiolytic decomposition of DTPA and secondarily to the formation of MEHPA. The replacement of nitrate with lactate stops the degradation of DTPA and DEHPA resulting in the retardation of increase of Df and a decrease of separation factor. The DEHPA-DTPA-lactic acid system is concluded to sustain absorption of radiation at an absorbed dose up to 200 Wh·I⁻¹ in the partitioning of transplutonium elements in HLW.     

New dialkyldithiophosphinic acid self-assembled monolayers (SAMs): influence of gold substrate morphology on adsorbate binding and SAM structure

We report the fabrication and characterization of new self-assembled monolayers (SAMs) formed from dihexadecyldithiophosphinic acid [(C(16))(2)DTPA] molecules on gold substrates. In these SAMs, the ability of the (C(16))(2)DTPA headgroup to chelate to the gold surface depends on the morphology of the gold substrate. Gold substrates fabricated by electron-beam evaporation (As-Dep gold) consist of ～50-nm grains separated by deep grain boundaries (～10 nm). These grain boundaries inhibit the chelation of (C(16))(2)DTPA adsorbates to the surface, producing SAMs in which there is a mixture of monodentate and bidentate adsorbates. In contrast, gold substrates produced by template stripping (TS gold) consist of larger grains (～200-500 nm) with shallower grain boundaries (<2 nm). On these substrates, the low density of shallow grain boundaries allows (C(16))(2)DTPA molecules to chelate to the surface, producing SAMs in which all molecules are bidentate. The content of bidentate adsorbates in (C(16))(2)DTPA SAMs formed on As-Dep and TS gold substrates strongly affects the SAM properties: Alkyl chain organization, wettability, frictional response, barrier properties, thickness, and thermal stability all depend on whether a SAM has been formed on As-Dep or TS gold. This study demonstrates that substrate morphology has an important influence on the structure of SAMs formed from these chelating adsorbates.     

Amperometric titration of mercury(II) with EDTA, DTPA and TRIEN in the ppm-range

Summary Mercury(II) can be titrated at pH 2.5–3 with EDTA, DTPA and TRIEN. The titration is followed amperometrically making use of a rotating gold-electrode at a potential of + 0.25 V vs. S.C.E. Especially the use of DTPA allows the determination of small amounts of mercury(II) (down to 1 g). The standard deviation is 2–3%. A correction for the systematic negative error of approximately 4% in the case of EDTA and 8% in the case of DTPA, mainly caused by the faradayic reaction at the electrode, can easily be made.

---

Bestimmung von ppm-Mengen Quecksilber(II) durch amperometrische Titration mit ÄDTA, DTPA und TRIEN

Zusammenfassung Quecksilber(II) kann bei pH 2,5–3 mit ÄDTA, DTPA und TRIEN gut titriert werden. Die Titration wird amperometrisch indiziert mit Hilfe einer rotierenden Gold-Elektrode bei einem Potential von + 0,25 V gegen eine gesättigte Kalomelelektrode. Besonders DTPA ermöglicht die Bestimmung von kleinen Mengen Quecksilber(II) (bis etwa 1 g). Die Standardabweichung beträgt 2–3%. Für die systematischen negativen Fehler von etwa 4% bei ÄDTA und 8% bei DTPA, hauptsächlich verursacht durch faradayische Umsetzung an der Elektrode, kann eine einfache Korrektur vorgenommen werden.

Lecture presented at Euroanalysis I Conference, 28. 8. –1. 9. 1972 in Heidelberg, Germany.     

Gd(DTPA-BIN)与人血清白蛋白作用的核磁共振研究

造影剂通常为Ｇｄ３＋、Ｍｎ２＋或Ｆｅ３＋的稳定化合物．它们能改变体内水分子氢核的弛豫速率,从而提高正常与病变组织的磁共振成像（ＭａｇｎｅｔｉｃＲｅｓｏｎａｎｃｅＩｍａｇｉｎｇ,ＭＲＩ）对比度或显示体内器官的功能状态．因此,开发新优ＭＲＩ造影剂具有重要...     

The rates of the exchange reactions between [Gd(DTPA)]2- and the endogenous ions Cu2+ and Zn2+: a kinetic model for the prediction of the in vivo stability of [Gd(DTPA)]2-, used as a contrast agent in magnetic resonance imaging

The kinetic stability of the complex [Gd(DTPA)]2- (H5DTPA = diethylenetriamine-N,N,N',N",N"-pentaacetic acid), used as a contrast-enhancing agent in magnetic resonance imaging (MRI), is characterised by the rates of the exchange reactions that take place with the endogenous ions Cu2+ and Zn2+. The reactions predominantly occur through the direct attack of Cu2+ and Zn2+ on the complex (rate constants are 0.93+/-0.17 M(-1) s(-1) and (5.6+/-0.4) x 10(-2)M(-1) S(-1), respectively). The proton-assisted dissociation of [Gd(DTPA)]2- is relatively slow (k1 = 0.58+/-0.22 M(-1) s(-1)), and under physiological conditions the release of Gd3+ predominantly occurs through the reactions of the complex with the Cu2+ and Zn2+ ions. To interpret the rate data, the rate-controlling role of a dinuclear intermediate was assumed in which a glycinate fragment of DTPA is coordinated to Cu2+ or Zn2+. In the exchange reactions between [Gd-(DTPA)]2- and Eu3+, smaller amounts of Cu2+ and Zn2+ and their complexes with the amino acids glycine and cysteine have a catalytic effect. In a model of the fate of the complex in the body fluids, the excretion and the "dissociation" of [Gd(DTPA)]2- are regarded as parallel first-order processes, and by 10 h after the intravenous administration the ratio of the amounts of "dissociated" and excreted [Gd(DTPA)]2- is constant. From about this time, 1.71% of the injected dose of [Gd(DTPA)]2- is "dissociated". The results of equilibrium calculations indicate that the Gd3+ released from the complex is in the form of Gd3+-citrate.     

Reduction-responsive vesicles composed of dimethylaminopropyl octadecanamide and dithiodipropionic acid

Reduction-responsive vesicle was prepared by salt-bridging N-[3-(dimethylamino)propyl]-octadecanamide (DMAPODA, a cationic amphiphile) using 3,3′-dithiodipropionic acid (DTPA, a disulfide diacid compound). According to the transmission electron micrograph and the fluorescence quenching degree (53.2%), it could be said that vesicles were formed when the DMAPODA to DTPA molar ratio was 2:2. The DMAPODA/DTPA associate was considered to be a building block for vesicle formation because DTPA could electrostatically associate with DMAPODA and help the cationic amphiphile assemble into the vesicle. On a differential scanning calorimetric thermogram, the DMAPODA/DTPA vesicle showed two endothermic peaks at 50.6°C and 63.2°C. The peak found at the lower temperature was possibly due to the solid gel-to-liquid crystal phase transition of the vesicular membrane and the peak found at the higher temperature was considered to be due to the melting of DMAPODA, indicating that unassociated DMAPODA coexisted with DMAPODA/DTPA vesicles. The release of calcein enveloped in the vesicle was promoted by DL-dithiothreitol, possibly because DTPA can be broken by the reducing agent to form mercaptopropionic acids and the vesicle could be disintegrated and/or the vesicular membrane would become defective.     

Decomposition Studies of Aqueous Phase Ligands Used in Advanced Reprocessing Flowsheets

Two potential methods for decomposing organic ligands in nitric acid have been studied using acetic acid and diethylenetriaminepentaacetic acid (DTPA) as examples; these methods were oxidation by nitric acid at elevated temperatures (70-110 °C) and electrochemical oxidation, both direct and mediated electrochemical oxidation. Based on total carbon measurements, acetic acid proved to be rather stable against nitric acid oxidation whereas 60-80% of DTPA was decomposed at 100-110°C. Electrochemical oxidation methods were generally more effective in decomposing acetic acid and DTPA with mediated electrochemical oxidation using Ag(II) ions the most effective method under the conditions tested, with ∼80 and >90% loss of carbon from acetic acid and DTPA solutions respectively, at ambient temperature in 6 M HNO₃.     

Kinetics of the exchange reactions between Gd(DTPA)2-, Gd(BOPTA)2-, and Gd(DTPA-BMA) complexes, used as MRI contrast agents, and the triethylenetetraamine-hexaacetate ligand

The kinetics of ligand exchange reactions occurring between the Gd(DTPA), Gd(BOPTA), and Gd(DTPA-BMA) complexes, used as contrast agents in MRI, and the ligand TTHA, have been studied in the pH range 6.5-11.0 by measuring the water proton relaxation rates at 25 °C in 0.15 M NaCl. The rates of the reactions are directly proportional to the concentration of TTHA, indicating that the reactions take place with the direct attack of the H(i)TTHA((6-i)-) (i = 0, 1, 2 and 3) species on the Gd(3+) complexes, through the formation of ternary intermediates. The rates of the exchange reactions of the neutral Gd(DTPA-BMA) increase when the pH is increased from 6.5 to 9, because the less protonated H(i)TTHA((6-i)-) species can more efficiently attack the Gd(3+) complex. The rates of the exchange reactions of [Gd(DTPA)](2-) and [Gd(BOPTA)](2-) also increase from pH 8.5 to 11, but from 6.5 to 8.5 an unexpected decrease was observed in the reaction rates. The decrease has been interpreted by assuming the validity of general acid catalysis. The protons from the H(i)TTHA((6-i)-) species (i = 2 and 3) can be transferred to the coordinated DTPA or BOPTA in the ternary intermediates when the dissociation of the Gd(3+) complexes occurs faster. The kinetic inertness of Gd(DTPA), Gd(BOPTA), and Gd(DTPA-BMA) differs very considerably; the rates of the ligand exchange reactions of Gd(DTPA-BMA), thus the rates of its dissociation, are 2 to 3 orders of magnitude higher than those of Gd(DTPA) and Gd(BOPTA). The rates of the ligand exchange reactions increase with increasing concentration of the endogenous citrate, phosphate, or carbonate ions at a pH of 7.4, but the effect of citrate and phosphate is negligible at their physiological concentrations. The increase in the reaction rates at the physiological concentration of the carbonate ion is significant (20-60%), and the effect is the largest for the Gd(DTPA-BMA) complex.     

Ion-pair interactions of lanthanide(III) complexes in aqueous solutions

The formation of ion-pair adducts between the cationic complex La(THP)3+ (THP = 1,4,7,10-tetrakis(2-hydroxypropyl)-1,4,7,10-tetraazacyclododecane) and the anionic complexes Tm(DOTA)- (DOTA = 1,4,7,10-tetraazacyclododecane-N,N',N",N"'-tetraacetate), Tm(DTPA)2- (DTPA = diethylenetriamine-N,N,N',N",N"-pentaacetate), Tm(TTHA)3- (TTHA = triethylenetetraamine-N,N,N',N",N"',N"'-hexaacetate), and Tm(DOTP)5- (DOTP = 1,4,7,10-tetraazacyclododecane-N,N',N",N"'-tetrakis(methylenephosphonate)) is examined by 13C NMR spectroscopy. The induced 13C shifts of the La(THP)3+ complex are followed by titration of the Tm(III) complexes of DOTA, DTPA, and TTHA at pH 7. From these data, the stability constants are calculated to be beta 1 = 64 M-1 (1:1), beta 1 = 296 M-1 (1:1), and beta 2 = 26,000 M-2 (2:1) for the ion pairs of La(THP)3+, with Tm(DOTA)-, Tm(DTPA)2-, and Tm(TTHA)3-, respectively. The La(THP)3+,Tm(DOTP)5- system elicits chiral resolution of the rapidly interconverting Tm(DOTP)5- isomers.     

Determination of Sulphate by Titrimetric and Colorimetric Measurement of Equivalent Displaced Zinc Ion

Abstract

Two methods are described for the determination of sulphate in the range of 200 μg to 100 mg by dissolving precipitated barium sulphate in excess of EDTA at pH 12.5. A titrimetric procedure involves back titration of excess EDTA with a standard zinc solution, while a complementary spectrophotometric method makes use of the stability of the barium EDTA complex in the presence of an excess of zinc ions; the latter are reacted with zincon and are equivalent to the amount of sulphate present.     

Complexes of diethylenetriaminepentaacetic acid as contrast agents in NMR imaging. Computer simulation of equilibria in human blood plasma

In magnetic resonance imaging (MRI), the degree of contrast can be improved by using suitable contrast agents. The diethylenetriaminepentaacetic acid (DTPA) complexes of paramagnetic ions have been proposed for this purpose. This paper deals with extensive simulations of the distribution of species in blood plasma when solutions of manganese(II), copper(II), iron(III) and gadolinium(III) ions (as their soluble salts and as DTPA complexes) are injected. The various interaction equilibria, for which formation constants are known, are considered in order to assess toxic side-effects associated with their use in MRI. The data obtained support from the thermodynamic point of view, the use of GdDTPA, and suggest that the administration of a slight excess of ligand would guarantee complete coordination of the toxic gadolinium ion, and only minor interaction with the metal ions naturally present in blood plasma.