Spectrophotometric determination of thallium with 4-(2-pyridylazo)resorcinol and 4-(2-thiazolylazo)resorcinol

Thallium(III) gives sensitive reactions with PAR and TAR (epsilon = 2 x 10(4) at 520 nm), forming 1:1 complexes at pH approximately 1-2, and a mixture of 1:1 and 1:2 complexes at higher pH values; hydrolysis sets in above pH approximately 3. The stability constants are evaluated.     

Spectrophotometric determination of palladium with 4-(2-pyridylazo)resorcinol

Summary A simple photometric method for the determination of palladium has been worked out, employing pyridylazo-resorcinol (PAR) as a complexing ligand for the metal ion. The coloured species is extractable into chloroform in the presence of diethylamine, the absorbance of which is measured at 535 nm. The method is free from the interference of a large number of elements particularly the other platinum metals. It obeys Beer's law in the range of 0–3 g Pd/ml with Sandell's sensitivity of 0.0034 g Pd cm^–2. The ratio of metal to ligand in the complex is found to be 1:1. Analysis of various samples has been carried out with satisfactory and reproducible results (standard deviation ±0.002).     

Relative stabilities of metal complexes of 4-(2-pyridylazo)resorcinol and 4-(2-thiazolylazo)resorcinol

The stability constants of 1:1 complexes of 4-(2-pyridylazo)resorcinol (PAR) and 4-(2-thiazolylazo)resorcinol (TAR) with Mn(II), Ni(II), Cu(II) and Zn(II) have been determined spectrophotometrically at μ = 0.1 and 25°C. The method is based on indirect estimation of the protonated and normal complexes by measuring the ligand absorption peak. Both protonated and normal complexes of these metals with PAR are more stable than those with TAR. The reverse order was previously observed for the pronated complexes of the lanthanides(III). The different behaviour of the 3d transition metals(II) compared to the lanthanides(III) is discussed. The proton dissociation constants of the protonated complexes of PAR or TAR with various metals are also discussed.     

Spectrophotometric determination of niobium in zirconium with 4-(2-pyridylazo)resorcinol

The direct spectrophotometric determination of niobium in zirconium alloys with 4-(2-pyridylazo)resorcinol is described. Samples are dissolved in hydrofluoricsulphuric acid mixture and the colour developed without the removal of fluoride. In the presence of EDTA only Co²⁺, Ta⁵⁺ and V⁵⁺ cause serious interference. The molar absorptivity is 3.67 .10⁴ in the presence of 1 /smg of zirconium, and Beer's law is obeyed up to 1.0μg Nb/ml. The method can be applied to zirconium alloys containing as little as 0.005% niobium.     

Spectrophotometric determination of formation constants of 1:1 complexes of lanthanides with 4-(2-pyridylazo)resorcinol (par)

Complex formation (1:1) between lanthanides(III) and 4-(2-pyridylazo)resorcinol (PAR or H₂R) has been studied by spectrophotometry. The method is based on indirect estimation of the protonated (MHR) and the normal (MR) complexes by measuring the absorbance at the peak for the ligand, which decreases with increasing metal concentration at a constant pH. Similar experiments were made at various pH values. Both MHR and MR complexes were found to be formed in the pH range 5–6. Their formation constants, logK_MHR and logK_MR, determined by graphical analysis, ranged from 3.78 ± 0.02 (Ce) to 4.39 ± 0.02 (Lu), and from 9.61 ± 0.06 (Ce) to 10.70 ± 0.05 (Lu), respectively. The acidity of the MHR complexes parallels the order of stability of the MR complexes.     

Ternary ion-association complexes between the indium(III) - 4-(2-pyridylazo)resorcinol anionic chelate and some tetrazolium cations

Complex formation and liquid-liquid extraction were studied in systems containing indium(III), 4-(2-pyridylazo)resorcinol (PAR), tetrazolium salt (TZS), water and chloroform. Two different TZS were used: 2,3,5-triphenyl-2H-tetrazolium chloride (TTC) and 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-2H-tetrazolium bromide (MTT). The optimum conditions for extraction of In(III) as a ternary complex, (TT⁺)[In(PAR)₂] or (MTT⁺)[In(PAR)₂], were found: pH, extraction time, concentration of PAR and concentration of TZS. The constants of extraction (K_ex), constants of association (β), constants of distribution (K_D) and recovery factors (R%) were determined. The apparent molar absorptivities in chloroform were calculated to be ɛ′₅₂₀=6.6×10⁴ L mol⁻¹ cm⁻¹ and ɛ′₅₁₅=7.1×10⁴ L mol⁻¹ cm⁻¹ for the systems with TTC (I) and MTT (II), respectively. Beer’s law was obeyed for In(III) concentrations up to 3.4 μg mL⁻¹ in both the cases. The limits of detection (LOD=0.07 μg mL⁻¹ I and LOD=0.12 μg mL⁻¹ II), limits of quantification (LOQ=0.24 μg mL⁻¹ I and LOQ=0.41 μg mL⁻¹ II) and Sandell’s sensitivities (SS) were estimated as well.      

Characterization of complexes involved in the spectrophotometric determination of cobalt with 4-(2-pyridylazo)resorcinol

Complex species involved in the spectrophotometric determination of cobalt with 4-(2-pyridylazo)resorcinol (PAR = H₂R) were studied in solution and in the solid state. An anionic [Co(III)R₂]^- species was extracted from aqueous solution in chloroform by tetraphenylarsonium or tetraphenylphosphonium chloride. Stable tetraphenylarsonium and tetraphenylphosphonium salts of di-4-(2-pyridylazo)resorcinolo cobaltate(III) with the formula [(C₆H₅)₄X][Co(III)R₂] where X=As.P; and R=C₁₁H₇N₃O₂^2-, were isolated from the chloroform phase. The complexes were characterized by elemental analyses, visible, i.r., p.m.r., e.s.r. spectra, x-ray powder photographs, magnetic susceptibility and conductivity measurements. The spectral evidence and magnetic properties indicate a tridentate coordination of two 4-(2-pyridylazo) resorcinol dibasic anions, bonded to cobalt(III) in a symmetric arrangement with both azo groups coordinated to the cobalt atom through a single nitrogen lone pair.     

Spectrophotometric determination of acidity constants of 4-(2-pyridylazo)resorcinol in binary methanol-water mixtures

The acidity constants of 4-(2-pyridylazo)resorcinol (PAR, Scheme 1) in binary mixtures of methanol-water at 25 °C and an ionic strength of 0.1 M have been determined spectrophotometrically. DATa ANalysis (DATAN) program applied for determination of acidity constants. As percent of methanol increases in solvent mixtures the pK_a constants also increased. There is linear relationship between acidity constants and the mole fraction of methanol in the solvent mixtures. Effect of solvent composition on acidity constants and pure spectrum of each component are also discussed.     

Spectrophotometric study and analytical application of the reaction between manganese(II) and 4-(2-pyridylazo)resorcinol

A highly sensitive method for spectrophotometric determination of manganese(II) with 4-(2-pyridylazo)resorcinol (PAR) as reagent is described. The molar absorptivity of the complex was found to be 8.65 ± 0·04 x 10⁴. The stability constant of the ML₂ complex was found to be log β₂ = 15·6. Beer's law is obeyed within the range 0·02–0·5 μg of Mn/ml. An application of this reaction for analytical purposes is described.     

The reaction of uranyl ions with 4-(2-pyridylazo)resorcinol

The uranyl ion and 4-(2-pyridylazo)resorcinol (PAR) form only 1:1 chelates in solutions of pH < 8.5, UO(2),(PAR)H(+) being formed at pH > 3 and UO(2),(PAR) at pH > 5.5. Equilibrium constants and spectrophotometric data for both chelates are given. Solid, non-stoichiometric crystalline species in which the mole ratio of PAR to uranium is more than 1:1 are precipitated up to pH 6. The medium of 0.1-0.2M triethanolamine at pH 8 recommended by other workers proved satisfactory for the sensitive spectrophotometric determination of uranium, as did pH 3.6 in the presence of < 0.1M formate or 20-30% v/v dimethylformamide.     

Liquid-liquid extraction and cloud point extraction for spectrophotometric determination of vanadium using 4-(2-pyridylazo)resorcinol

Liquid-liquid extraction (LLE) and cloud point extraction (CPE) of vanadium(V) ternary complexes with 4-(2-pyridylazo)resorcinol (PAR) and 2,3,5-triphenyl-2H-tetrazolum chloride (TTC) were investigated. The optimal conditions for vanadium extraction and spectrophotometric determination were identified. The composition (V: PAR: TTC) of the extracted species was 1:2:3 (optimal conditions; LLE), 2:2:2 (low reagents concentrations; LLE), 1:1:1 (short heating time;CPE), and 1: 1: 1 + 1: 1: 0 (optimal extraction conditions; CPE). LLE, performed in the presence of 1,2-diaminocyclohexane-N,N,N′,N′-tetraacetic acid and NH₄F as masking agents, afforded the sensitive, selective, precise, and inexpensive spectrophotometric determination of vanadium. The absorption maximum, molar absorptivity, limit of detection, and linear working range were 559 nm, 1.95 × 10⁵ dm³ mol^?1 cm^?1,0.7 ng cm^?3, and 2.2–510 ng cm^?3, respectively. The procedure thus developed was applied to the analysis of drinking waters and steels. The relative standard deviations for V(V) determination were below 9.4 % (4–6 × 10^?7 mass %; water samples) and 2.12 % (1–3 mass %; steel samples).     

Extraction and spectrophotometric determination of gallium with 4-(2-pyridylazo)resorcinol

A sensitive and selective spectrophotometric determination of gallium is described. It is based on extraction of gallium from 3 M hydrochloric acid solution as a chloro-complex into 1,2-dichlorobenzene and exchange of the chloro ligand with 4-(2-pyridylazo)resorcinol (PAR); the final association complex of Ga—PAR with tetraphenylarsonium ions is measured in the organic phase. The absorption maximum occurs at 510 nm and the effective molar absorptivity is (8.2 ±0.3) ·1O⁴ l mol^-1cm^-1. Beer's law is obeyed over the range 0.2–2 p.p.m. of gallium. Few ions interfere.     

Spectrophotometric studies on the simultaneous determination of cadmium and mercury with 4-(2-pyridylazo)-resorcinol

A new method for direct spectrophotometric determination of cadmium with 4-(2-pyridylazo)-resorcinol is reported. Absorption maximum, molar absorptivity and Sandell's sensitivity of the 1:1 (M:L) complex are 510 nm, 2.5 x 10(5) l mol(-1) cm(-1) and 3.55 ng cm(-2), respectively. A linear calibration graph is obtained up to 4.49 microg ml(-1). The zero-crossing measurement technique is found suitable for the direct measurement of the first-derivative value at the specified wavelengths. Cadmium(II) (0.42-9.2 microg ml(-1)) and mercury(II) (0.35-7.4 microg ml(-1)) in different ratios have been determined simultaneously. A critical evaluation of the proposed method is performed by statistical analysis of the experimental data. The developed method was applied to the simultaneous spectrophotometric determination of Cd and Hg in some synthetic mixtures and was found to give satisfactory results.     

Spectrophotometric studies and analytical application of Ce(III) chelates with 1-(2-pyridylazo)-2-naphthol (PAN)

A sensitive procedure for spectrophotometric determination of cerium(III) has been developed. AtpH 10.2 cerium reacts with 1-(2-pyridylazo)-2-naphthol in 40% ethanol to form a red complex which has an absorption maximum at 545 nm. The molar absorptivity at 545 is 3.95·10³ mol^–1. Maximum stability of the complex was attained in pure ethanol. The stoichiometries and structures of the chelates were studied applying conductometric titration, visible spectrophotometry and IR spectrophotometry. The IR spectra revealed that coordination takes place through the N=N, C-OH and pyridyl group.

---

Spektrophotometrische Untersuchungen und analytische Anwendung von Ce(III)-Chelaten mit 1-(2-Pyridylazo)-2-naphthol (PAN)

Zusammenfassung Es wurde eine empfindliche Methode zur spektrophotometrischen Bestimmung von Cer(III) entwickelt. Bei einempH von 10,2 reagiert Cer mit 1-(2-Pyridylazo)-2-naphthol in 40% Ethanol unter Bildung eines roten Komplexes mit einem Absorptionsmaximum bei 545 nm (=3 950). Der Komplex besitzt in reinem Ethanol ein Maximum an Stabilität. Die Stöchiometrien und Strukturen der gebildeten 1:1- und 1:2-Chelate wurden mittels konduktometrischer Titration, Elektronen- und IR-Spektrometrie untersucht. Die IR-Daten zeigen, daß die Koordination über N=N, C-OH und Pyridyl erfolgt.

     

Determination of titanium by adsorption voltammetry with 4-(2-pyridylazo) resorcinol

Summary Titanium (IV) forms a complex with 4-(2-pyridylazo) resorcinol (PAR) in weakly acidic solutions. This complex can be used to determine titanium by adsorption voltammetry at a stationary Hg-electrode. The experimental conditions for the determination are described. The current-concentration curve is linear from 0.15–4.8 ng/g. Ti at a deposition time of 3 min, the detection limit lies at 0.1 ng/g. The influence of foreign ions was investigated. The determination can be carried out in the presence of a 1000-fold excess of iron by the standard addition method, albeit with decreased sensitivity.