1-(4-nitrophenyl)-3-(2-quinolyl) triazene as an extremely sensitive reagent for spectrophotometric determination of mercury

1-(4-Nitrophenyl)-3-(2-quinolyl)triazene has been synthesized, and used as an extremely sensitive reagent for the spectrophotometric determination of mercury by the decrease in the absorbance of the reagent at 490 nm and pH 9.0-10.8 in the presence of cetylpyridinium bromide. Beer's law is obeyed over the range 0-120 ng/ml Hg(II), the apparent molar absorptivity being 1.0 x 10(6) l.mole(-1).cm(-1). The effect of 69 ionic species or compounds has been examined. Trace mercury in waste water has been determined satisfactorily.     

Spectrophotometric determination of cobalt in a vitamin, alloys and an ore by extraction of its 3-hydroxy-2-methyl-1,4-naphthoquinone 4-oxime complex into molten naphthalene

A selective spectrophotometric method has been developed for the determination of cobalt after extraction of its 3-hydroxy-2-methyl-1,4-naphthoquinone 4-oxime (HMNQM) complex into molten naphthalene. The optimum pH range for the extraction is 5.0-7.5. The solidified naphthalene, containing the cobalt-HMNQM complex, is separated by filtration and dissolved in N,N-dimethylformamide. The absorbance is measured at 430 nm against a reagent blank. Beer's law is obeyed up to 1.90 ppm cobalt. The molar absorptivity is 2.09 x 10(4) l.mole(-1).cm(-1).     

Simultaneous determination of beryllium and aluminium in mixtures using derivative spectrophotometry

The spectrophotometric determination of beryllium and aluminium with 5,8-dihydroxy-1,4-naphthoquinone in the presence of a non-ionic surfactant is reported. Absorption maxima, molar absorptivity and Sandell's Sensitivity of 1:2 (M:L) beryllium and aluminium complexes are, 585 nm and 598 nm, 1.63 x 10(4) l.mole(-1).cm(-1) and 2.04 x 10(4) l.mole(-1).cm(-1), and 0.55 ng/cm(2) and 1.32 ng/cm(2) respectively. Beer's law is obeyed between 7.20-3.96 x 10(2) ng/ml beryllium and 1.08 x 10(1)-1.08 x 10(3) ng/ml aluminium. A method for simultaneous determination of beryllium and aluminium in their mixture using derivative spectra is described. The range 3.6 x 10(1)-3.6 x 10(2) ng/ml beryllium could be determined in the presence of 1.08 x 10(2)-1.08 x 10(3) ng/ml aluminium, and vice versa.     

Determination of palladium with thiocyanate and rhodamine b by a solvent-extraction method

Sensitive spectrophotometric and spectrofluorimetric procedures for the determination of palladium have been developed, based on solvent-extraction of the ion-pair formed between Rhodamine B and the anionic complex of Pd(II) with thiocyanate. With an organic to aqueous phase-volume ratio of 1:5, the molar absorptivity is 9.0 x 10(4) l.mole(-1).cm(-1) and the absorbance of the reagent blank is 0.026. Spectrophotometrically, palladium can be determined in the range 0.1-8.8 mug. Spectrofluorimetrically, it can be determined over the range 0.04-1.5 mug. The spectrophotometric procedure has been applied to the determination of palladium in dental alloys, organopalladium compounds and hydrogenation catalysts.     

Malachite green as a reagent for detection and spectrophotometric determination of chromium(VI)

A sensitive and inexpensive method of spectrophotometric determination of chromium(VI), based on the absorbance of its complex with malachite green and acetic acid at pH 2.5 is reported. The complex shows a molar absorptivity of 8 x 10(4) l.mole(-1) cm(-1) at 560 nm, using malachite green and acetic acid as reference solution. The effect of time, temperature, pH and reagent concentration is studied and optimum operating conditions are established. Beer's law is applicable in the concentration range 2.0-22.8 mug/ml chromium(VI). The resin beads act as a catalyst and as little as 1.6 mug of chromium(VI) is detected in the resin phase as compared to 4.1 mug in the solution phase. The standard deviation in the determinations is +/-0.40 mug/ml for a 10.35 mug/ml solution.     

Spectrophotometric determination of nickel in vegetable oil with ammonium 2-amino-1-cyclohexene-1-dithiocarboate

The reaction between nickel and ammonium 2-amino-1-cyclohexene-1-dithiocarboate in aqueous acetone medium at pH 3.0-8.0 results in a stable dark red complex. The ratio of reagent to nickel in the complex is 2:1 and the formation constant is 7.38 +/- 0.12 x 10(10). Beer's law is obeyed up to 4 microg/ml nickel at the absorption maximum at 535 nm. The apparent molar absorptivity is 2.8 x 10(4) l.mole(-1). cm(-1), and the detection limit is 10 ng/ml nickel. The method is applied to the determination of nickel in vegetable oil.     

Extractive spectrophotometric determination of trace amounts of iron(III) with benzyltriethylammonium chloride

The ion-association complex formed between a thiocyanato-iron(III) ion and a benzyltriethylammonium ion is extracted into 1,2-dichloroethane, and its absorbance at 476 nm is used for determination of the iron. Beer's law is obeyed up to about 4 mug/ml iron concentration in the final solution. The molar absorptivity is 2.79 x 10(4) l.mole(-1).cm(-1).     

Extraction-spectrophotometric determination of boron with 4,6-Di-tert-butyl-3-methoxycatechol and ethyl violet

4,6-Di-tert-butyl-3-methoxycatechol (DBMC) has been developed as a new reagent for boron, the complex anion formed being extracted as an ion-associate with Ethyl Violet into toluene, and the absorbance measured at 610 nm. The calibration graph is linear up to 0.43 mug of boron, the molar absorptivity is 1.02 x 10(5) 1.mole(-1).cm(-1) and the relative standard deviation 1.2%. The method has been applied to the determination of boron in sea-water and river water with satisfactory results.     

Spectrophotometric determination of osmium with 1-phenyl-4,4,6-trimethyl-(1H,4H)-2-pyrimidinethiol and extraction into molten naphthalene

Conditions have been developed for the spectrophotometric determination of osmium with 1-phenyl-4,4,6-trimethyl-(1H,4H)-2-pyrimidinethiol after extraction of the complex into molten naphthalene. Beer's law holds for the concentration range of 4-77 mug of osmium in 10 ml of the final solution. The molar absorptivity is 1.33 x 10(4) l.mole(-1).cm(-1). The reagent is highly selective for osmium.     

Spectrophotometric determination of chromium(III) and rhodium(III) after extraction with oxine into molten naphthalene

Conditions have been developed for the extraction of chromium(III) and rhodium(III) as their 8-hydroxyquinolinates into molten naphthalene. The naphthalene is allowed to solidify, separated by filtration, dried with filter paper and dissolved in chloroform. The solution is diluted to 10 ml and its absorbance measured at 410 nm for chromium and 425 nm for rhodium, against a reagent blank. In both cases the solution is stable for 24-36 hr. Beer's law is obeyed over the range of 2.7-48.6 mug of chromium or 2.7-57.5 mug of rhodium in 10 ml of the chloroform solution. The molar absorptivity is 3 x 10(3) l. mole(-1) . cm(-1) for chromium and 3.6 x 10(4) for rhodium. Solutions containing 27.0 mug of chromium or 10.95 mug of rhodium give a mean absorbance of 0.140 and 0.395 respectively, with standard deviations of 0.002(2) and 0.004(7). Most metal ions that form oxinates may interfere, but can be removed beforehand by normal liquid-liquid extraction.     

Spectrophotometric determination of vanadium with 1,10-phenanthroline

A simple and sensitive spectrophotometric method for the determination of vanadium based upon the reaction of vanadate with 1,10-phenanthroline in the presence of sodium dithionite in ammoniacal solution is described. The absorbance of the complex measured at 645 nm follows Beer's law for solutions containing 30-400 microg of vanadium in 100 ml of solution. A 10-fold excess of molybdenum, tungsten, phosphorus or chromium does not interfere. The molar absorptivity is 8.0 x 10(3) 1 mole(-1) cm(-1). The complex is shown to be tris-1,10-phenanthroline vanadium(II). The method has been applied successfully to the determination of vanadium in bauxite.     

Spectrophotometric determination of Fe(III) in alkaline solutions without neutralization

Spectrometric study on the complexation of Fe(III) with an organic reagent obtained by coupling 3-methyl-1-phenyl-5-pyrazolone with diazotized 3-hydroxy-4-amino-benzene sulphonic acid was carried out in alkaline solutions. A 1:2 Fe(III): reagent water soluble complex is formed. The optimum pH is 9.0-11.8. The maximum absorbance of the complex lies at lambda = 560 nm, where the absorbance of the reagent is low. The molar absorptivity is 9000 l.mole(-1).cm(-1) at pH = 11.6. The value of the stability constant determined at 20 +/- 1 degrees C, pH = 11.6 and lambda = 560 nm is 4 x 10(5)M. The Beer-Lambert law is followed for iron concentration in the 0.2-5.0 mug/ml range. The spectrophotometric method was tested on synthetic solutions and thus applied for determination of traces of Fe(III) in several samples of alkaline hydroxides and carbonates without the neutralization of the solutions.     

Spectrophotometric determination of iron(III) dimethyldithiocarbamate (ferbam)

A spectrophotometric method was developed for the determination of ferbam (iron(III) dimethyldithiocarbamate) by converting it into an iron-phenanthroline complex, which was then absorbed on microcystalline naphthalene in the presence of tetraphenylborate, and the absorbance was measured at 515 nm against a reagent blank. The molar absorptivity of the complex was 1.2 x 10(4)l mol(-1)cm(-1). Ten replicate analyses of a sample solution containing 150 mug of ferbam gave a relative standard deviation of 0.84%. Beer's law was obeyed over the concentration range 22.4-372.9 mug of ferbam. The effects of various factors such as reagent concentration and naphthalene, shaking time and diverse ions were studied in detail. The method is sensitive and selective and can be applied to the direct determination of ferbam in commercial samples and in mixtures containing various other dithiocarbamates (e.g. ziram, zineb and maneb) in foodstuffs.     

Simultaneous spectrophotometric determination of nickel and iron in copper-base alloy with bromo-PADAP

The reaction of nickel (II) with Br-PADAP, in the presence of tergitol NPX surfactant, forms a complex with absorption peaks at 520 and 560 nm. The iron(II)-Br-PADAP system at the same conditions forms a chelate with absorption peaks at 560 and 748 nm. This allows the simultaneous spectrophotometric determination of nickel and iron by measuring the absorbance at 560 and 748 nm. The proposed method, at ph 4.0-5.7, shows a molar absorptivity of 1.22 x 10(5)l . mole(-1) . cm(-1) for nickel at 560 nm and 8.20 x 10(4)l . mole(-1) . cm(-1) at 560 nm and 3.35 x 10(4)l . mole(-1) . cm(-1) at 748 nm for iron(II). Beer's law is obeyed up to 0.40 mu/ml of nickel(II) and up to 0.65 mu/ml of iron(II). Thiosulphate as masking agent allows the simultaneous determination of iron and nickel in the presence of high concentrations of copper. The ethylene glycol 2-(2-amino-ethyl) tetracetic acid provides the elimination of many other interferences. The method has been applied successfully to the simultaneous determination of nickel and iron in reference samples.     

Spectrophotometric determination of indium in nickel alloys and zinc ores with 1-(2-pyridylmethylideneamine)-3-(salicylideneamine)thiourea

A sensitive method for the spectrophotometric determination of indium with 1-(2-pyridylmethylideneamine)-3-(salicylideneamine)thiourea is proposed. A yellow complex is formed at pH 4.5 (succinate buffer) in a medium containing 40% dimethylformamide, and the absorbance is measured at 415 nm. The molar absorptivity is 6.2 x 10(4)l.mole(-1).cm(-1). The relative standard deviation of the procedure is 1.5%. The method has been applied to determination of indium in a nickel alloy and three zinc ores, with prior isolation of indium by co-precipitation with ammonia and extraction into n-butyl acetate from 5M hydrobromic acid.     

Photometric determination of cobalt with nitroso-R-salt

The chelate is quantitatively formed only in the pH range 6.5-7.5. Despite the large stability constant, a large excess of reagent is required to suppress interferences. The most suitable wavelength for the photometric measurement is 500 nm, where the molar absorptivity is 1.607 x 10(4) 1.mole(-1). cm(-1). The procedure given allows determination of 8 x 10(-4)% Co in a l-g sample. The standard deviation for cobalt is 2.1 mug/100 ml (f = 19). Applications to analysis of iron and steel, nickel, copper, ores and silicates are given.     

Spectrophotometric determination of trace sulphate in rain and snow after preconcentration with 2-aminoperimidine on a membrane filter

A simple and precise preconcentration technique, based on collecting a precipitate on a membrane filter and dissolving the filter and precipitate in an organic solvent, has been applied to the spectrophotometric determination of trace sulphate in rain and snow. The sulphate is precipitated with 2-aminoperimidine and the resulting compound is dissolved in nitric acid, made alkaline with sodium hydroxide and then adsorbed on tetradecyldimethylbenzylammonium nitrate. The precipitate is then collected on a membrane filter and both precipitate and filter are dissolved in dimethylsulphoxide (DMSO). The absorbance of the DMSO solution is measured at 550 nm against a reagent blank. The molar absorptivity is 2.1 x 10(4) 1 . mole(-1) . cm(-1) and the coefficient of variation for six measurements is < 1.5%. The detection limit (S/N = 3) is 0.06 mug of sulphate in 5 ml of sample solution.     

Spectrophotometric and second-derivative spectrophotometric determination of mercury in organomercurials by means of benzyl 2-pyridyl ketone 2-quinolylhydrazone

Mercury(II) reacts with benzyl 2-pyridylketone 2-quinolylhydrazone (BPKQH) in the pH range 9.0-10.4, to form a stable 1:2 (metal:ligand) complex which has a sharp absorption maximum at 475 nm and molar absorptivity 5.01 x 10(4) 1.mole(-1).cm(-1). It is proposed for use in spectrophotometric determination of mercury at microg/ml levels and analysis for organomercurials. The sensitivity of the method can be increased significantly by employing derivative spectrophotometry, making mercury determination at ng ml levels feasible.     

Highly selective assay of proteins in dilute solutions

A very simple, highly selective assay of proteins has been developed. Solutions of 6 M hydrochloric acid containing 0-20 mug ml(-1) protein are subjected to acid hydrolysis, in the presence of air, during their evaporation to dryness on a steam bath. Then, the resulted amino acids are determined with a 2,2-dihydroxy-1,3-indanedione reagent. To eliminate any interference and to increase in selectivity of the assay, a blank with the unhydrolyzed protein is carried out. The protein being analyzed or alanine is used to plot calibration curves. The absorbance of the colored solution is read at 516 nm. The color system obeys Beer's law in the range 0.1-20 mug ml(-1) protein. The molar absorptivity for alanine was found to be 1.69x10(3) (+/-9.7) l mol(-1) cm(-1). Also, the relative molar absorptivity for peptone was found to be 1.23x103 (+/-6.5) l mol(-1) cm(-1). The lowest limits for the estimation of serum albumin, gelatin, and peptone are around 0.25,0.19 and 0.31 mug ml(-1), respectively. The method is highly selective and the determination is little affected by the presence of other substances. All other important analytical parameters were studied and practical applicability of the method has been verified by the analysis of some biological materials.     

Spectrophotometric determination of copper in alloys using naphthazarin

Naphthazarin (5,8-dihydroxy-1,4-naphthoquinone; Naph) is proposed as a chromogenic reagent for the spectrophotometric determination of copper(II). The polynuclear complex has a mole ratio of Cu:Naph=4:6 in a 50% v/v ethanol/water medium containing 0.1 M ammonium acetate and 1.5% (w/v) sodium dodecyl sulfate. The copper-naphthazarin complex shows an absorption maximum at 330 nm with a molar absorptivity of 1.84x10(4) l mol(-1) cm(-1). Beer's law is obeyed up to 4.5 ppm of copper(II). The method was applied for copper determination in alloy samples with satisfactory results.