Column preconcentration of trace manganese with the ion pair of 2-nitroso-1-naphthol-4-sulfonic acid tetradecyldimethylbenzyl-ammonium chloride supported on naphthalene and determination by derivative spectrophotometry

A column preconcentration method has been developed for the determination of trace amounts of manganese by preconcentration on 2-nitroso-1-naphthol-4-sulfonic acid (nitroso-S)-tetradecyldimethylbenzylammonium (TDBA) naphthalene as an adsorbent using a simple funnel tipped glass tube. Manganese reacts with nitroso-S to form a water soluble brown colored chelate anion. The chelate anion forms a water insoluble Mn-Nitroso-S-TDBA ion pair on naphthalene packed in a column in the pH range 9.6-10.5 at a flow rate of 1-2 ml/min. The solid mass consisting of manganese complex and naphthalene is dissolved in 5 ml of dimethylformamide (DMF) and the metal determined by second derivative spectrophotometry. The calibration curve is linear in the concentration range 0.25-35.0 micrograms of Mn in 5 ml of the final DMF solution. Eight replicate determinations of 25 micrograms of standard manganese solution give a mean peak height of 4.0 with a correlation coefficient of 0.9995 and relative standard deviation of +/- 1.1%. The sensitivity was calculated to be 0.502(d2 A/d lambda 2)/microgram ml-1 from the slope of the calibration curve. The detection limit was 0.020 microgram ml-1 for manganese at the minimum instrumental settings (signal to noise ratio = 2). Various parameters effecting the method such as the effect of pH, volume of aqueous phase and interference of a number of metal ions on the determination of manganese have been evaluated to optimize the conditions for its determination in standard alloys and biological samples.     

Ruthenium-manganese complexes for artificial photosynthesis: factors controlling intramolecular electron transfer and excited-state quenching reactions

Continuing our work toward a system mimicking the electron-transfer steps from manganese to P(680)(+) in photosystem II (PS II), we report a series of ruthenium(II)-manganese(II) complexes that display intramolecular electron transfer from manganese(II) to photooxidized ruthenium(III). The electron-transfer rate constant (k(ET)) values span a large range, 1 x 10(5)-2 x 10(7) s(-1), and we have investigated different factors that are responsible for the variation. The reorganization energies determined experimentally (lambda = 1.5-2.0 eV) are larger than expected for solvent reorganization in complexes of similar size in polar solvents (typically lambda approximately 1.0 eV). This result indicates that the inner reorganization energy is relatively large and, consequently, that at moderate driving force values manganese complexes are not fast donors. Both the type of manganese ligand and the link between the two metals are shown to be of great importance to the electron-transfer rate. In contrast, we show that the quenching of the excited state of the ruthenium(II) moiety by manganese(II) in this series of complexes mainly depends on the distance between the metals. However, by synthetically modifying the sensitizer so that the lowest metal-to-ligand charge transfer state was localized on the nonbridging ruthenium(II) ligands, we could reduce the quenching rate constant in one complex by a factor of 700 without changing the bridging ligand. Still, the manganese(II)-ruthenium(III) electron-transfer rate constant was not reduced. Consequently, the modification resulted in a complex with very favorable properties.     

Capillary electrophoretic determination of dithiocarbamates and ethyl xanthate

A simple and sensitive capillary electrophoretic method was developed for the separation and determination of sodium methyldithiocarbamate (metham), manganese ethylenebisdithiocarbamate (maneb) and ethyl xanthate in boric acid buffer by direct UV absorbance detection at lambda = 254 nm. The separation is dependent on pH and nature of the buffer. The detection limits (S/N = 3) are 1.7 x 10(-6) mol/L for ethyl xanthate, 1.3 x 10(-6) mol/L for metham and 2.1 x 10(-6) mol/L for maneb. The method has been successfully applied to the analysis of wheat samples spiked with maneb and in a commercial sample.     

Determination of manganese in some medicinal plants and their infusions by a catalytic spectrophotometric method

The catalytic effect of manganese (II) on the oxidation of the azo dye 3-Methyl-6-(2-hydroxyethoxy)-2-[2-methoxy-4-N (N, N diethylamino) phenylazo] benzothiazolium methylsulphate, with potassium periodate in the presence of 1,10-phenanthroline in weakly acidic media was studied. The reaction was followed spectrophotometrically by measuring the decrease in the absorbance of the dye at 560 nm. Under the optimum conditions (4 x 10(-5) mol dm(-3) azo dye, 4 x 10(-4) mol dm(-3) potassium periodate, 1 x 10(-4) mol dm(-3) 1,10-phenanthroline, 0.1 mol dm(-3) buffer--pH 3.0, 70 degrees C, 8 min) manganese (II) in the range 0.1-5 ng cm(-3) could be determined by the fixed-time method with a detection limit of 0.035 ng cm(-3). The developed method is highly sensitive, selective, and simple. The method was applied successfully to the determination of total manganese in some medicinal plants and to analyse their infusions for trace amounts of total manganese and free manganese (II) ions without separation.     

Light induced manganese oxidation and long-lived charge separation in a Mn2II,II-RuII(bpy)3-acceptor triad

The photoinduced electron-transfer reactions in a Mn2II,II-RuII-NDI triad (1) ([Mn2(bpmp)(OAc)2]+, bpmp = 2,6-bis[bis(2-pyridylmethyl)aminomethyl]-4-methylphenolate and OAc = acetate, RuII = tris-bipyridine ruthenium(II), and NDI = naphthalenediimide) have been studied by time-resolved optical and EPR spectroscopy. Complex 1 is the first synthetically linked electron donor-sensitizer-acceptor triad in which a manganese complex plays the role of the donor. EPR spectroscopy was used to directly demonstrate the light induced formation of both products: the oxidized manganese dimer complex (Mn2II,III) and the reduced naphthalenediimide (NDI*-) acceptor moieties, while optical spectroscopy was used to follow the kinetic evolution of the [Ru(bpy)3]2+ intermediate states and the NDI*- radical in a wide temperature range. The average lifetime of the NDI*- radical is ca. 600 micros at room temperature, which is at least 2 orders of magnitude longer than that for previously reported triads based on a [Ru(bpy)3]2+ photosensitizer. At 140 K, this intramolecular recombination was dramatically slowed, displaying a lifetime of 0.1-1 s, which is comparable to many of the naturally occurring charge-separated states in photosynthetic reaction centra. It was found that the long recombination lifetime could be explained by an unusually large reorganization energy (lambda approximately 2.0 eV), due to a large inner reorganization of the manganese complex. This makes the recombination reaction strongly activated despite the large driving force (Delta-G degrees = 1.07 eV). Thus, the intrinsic properties of the manganese complex are favorable for creating a long-lived charge separation in the "Marcus normal region" also when the charge separated state energy is high.     

Study on the second-order optical behavior of 4-(substituted-benzylidene)-2-phenyl-4H-oxazol-5-one

The maximum absorption wavelengths (lambda(a-max)), absorption coefficient (epsilon), maximum emission wavelengths (lambda(e-max)) of 4-benzo[1,3]dioxol-5-ylmethylene-2-phenyl-4H-oxazol-5-one (1), 4-(3,4-dimethoxybenzylidene)-2-phenyl-4H-oxazol-5-one (2) and 4-(3,4,5-trimethoxy-benzylidene)-2-phenyl-4H-oxazol-5-one (3) were measured, their second-order nonlinear polarization values (beta(xxx)) were determined by solvatochromic method. Although the spectral nature (lambda(a-max), epsilon, lambda(e-max)) and beta(xxx) values of 1, 2 and 3 were close to each other in the same solvent, the second-order harmonic generation (SHG) value of sample 1 is higher obviously than that of sample 2 or 3 in solid state. The crystal structures of 1 and 2 characterized by single crystal X-ray diffraction technique indicated the reason why the SHG value of 1 is higher.     

Kinetic model of energy transfer processes between low-coordinated ions on MgO by photoluminescence decay measurements.

Photoluminescence decay studies of emitting species on MgO nanocubes at room temperature provide evidence of three surface species characterized by an excitation and emission wavelength couple {lambda(exc);lambda(em)}. Species A corresponds to {lambda(exc)=240 nm; lambda(em)=380 nm}, whereas the couple {lambda(exc)=280 nm; lambda(em)=470 nm} is assigned to two species: B and B', the former is involved in energy transfer from excited state A* and the latter in direct emission from excited state B'*. A simple model for energy transfer from species A* to B is proposed. The numerical resolution of equations corresponding to this model is in good agreement with experimental data. This method quantifies the kinetics of intrinsic emission and energy transfer processes. Lifetime values indicate that phosphorescence is taking place, and species A, B and B' are identified as edge O(2-) (4 C), corner O(2-) (3 C) and kink O(2-) (3 C) oxide ions respectively.     

Preconcentration of 1-(2-pyridylazo)-2-naphthol-iron(III)-capriquat on a membrane filter, and third-derivative spectrophotometric determination of iron(III)

Iron(III) was preconcentrated by collection on an organic solvent-soluble membrane filter (nitrocellulose (NC)) of the iron(III)-1-(2-pyridylazo)-2-naphthol (PAN) complex in the presence of capriquat as an oily quaternary ammonium salt. Third-derivative spectrophotometry was used for measurement of the third-derivative distance (d(3)A/dlambda(3)) between lambda(1) = 520 nm and lambda(2) = 590 nm or lambda(3) = 660 nm and lambda(4) = 724 nm of the iron(III)-PAN-capriquat complex or PAN-capriquat in dimethylsulfoxide (DMSO) following preconcentration. The calibration curve was linear in the range of 1-10 mug iron(III)/5.0 ml DMSO solution. The proposed method was about five-fold more sensitive and more selective than using zero-order spectrophotometry.     

Kinetic determination of traces of manganese in different materials by its catalytic effect on the methylene green-periodate reaction

The oxidation of Methylene Green by sodium periodate is a slow process. A kinetic method based on the catalytic effect of manganese(II) on this reaction in the presence of 1,10-phenanthroline as activator is described. The reaction is followed spectrophotometrically by measuring the decrease in the absorbance of the dye at 620 nm. Under the optimal experimental conditions [4 x 10(-5)M Methylene Green, 0.2M acetate buffer (pH 4), 2 x 10(-3)M 1,10-phenanthroline, 2.5 x 10(-3)M sodium periodate, 35 degrees ], manganese(II) between 0.2 and 30 ng ml is determined by the tangent method. The accuracy of the method and the influence of 44 foreign ions have been studied and an equation for the kinetics of the catalysed reaction is proposed. The procedure has been applied to the determination of manganese in water, milk and beer with excellent results.     

Kinetic spectrofluorimetric determination of silver, based on its catalytic effect on the oxidation of pyrocatechol-1-aldehyde 2-pyridylhydrazone by peroxodisulphate in the presence of 1,10-phenanthroline as activator

A kinetic fluorimetric method for the determination of silver is described, based on its catalytic effect on the oxidation of pyrocatechol-1-aldehyde 2-pyridylhydrazone by peroxodisulphate. In aqueous solution silver concentrations of 0.2-0.8 mug ml can be determined, and 10-80 ng ml in the presence of 1,10-phenanthroline as activator. The fluorescent species obtained (lambda(ex) 357 nm, lambda(em) 445 nm) results from oxidation of the reagent. The kinetic parameters and the interferences are reported, and the method is applied to the determination of silver in developed panchromatic plates.     

The structure and catalytic activity of anatase and rutile titania supported manganese oxide catalysts for selective catalytic reduction of NO by NH3

The structure and catalytic properties of anatase and rutile supported manganese oxide catalysts prepared by impregnation method have been studied by using X-ray diffraction (XRD), laser Raman spectroscopy (LRS), X-ray photoelectron spectroscopy (XPS), H(2) temperature-programmed reduction (H(2)-TPR) and BET surface area measurements combined with activity testing of selective catalytic reduction (SCR) of NO by NH(3). It has been shown that the manganese oxide loadings on the two TiO(2) supports exert great influences on the SCR activity. For the rutile supported manganese oxide catalysts, increasing manganese oxide loading leads to the increase of reducibility of dispersed manganese oxide species and the rate constant k, which reaches a maximum around 9.6 × 10(-6) mol g(Mn)(-1) s(-1) at 0.5 mmol Mn per 100 m(2) TiO(2). When the manganese oxide loading is beyond this value, the existence of amorphous MnO(x) multiple layers will certainly reduce the ratio of manganese oxide species exposed on the surface and the reducibility of dispersed manganese oxide species, resulting in the rapid decrease of rate constant k. The LRS and XPS results have revealed that for the anatase supported manganese oxide catalysts manganese oxide species exist in Mn(+4) as a major species with Mn(+3) species and partially undecomposed Mn-nitrate as the minor species. Under the SCR reaction conditions, Mn(+3) species on anatase are oxidized to Mn(+4) species, inserting in the surface of anatase and promoting the anatase-to-rutile transformation in the surface layers of the anatase support. Since these Mn(4+) cations are actually dispersed on the support with a rutile shell-anatase core structure and its concentration is very near to that of MnO(x)/TiO(2) (R) catalyst, the relation between the rate constant k and the MnO(x) loading on the anatase support is similar to that on the rutile support, and that the rate constant k values for anatase and rutile supported manganese oxide catalysts are very close at the same MnO(x) loading.     

Simultaneous determination of manganese and zinc in mixtures using first- and second-derivative spectrophotometry

A new direct spectrophotometric determination of manganese with 5,8-dihydroxy-1,4-naphthoquinone (naphthazarin,NAZA) is reported. Absorption maximum, molar absorptivity and Sandell's sensitivity of 1:2 (M:L) complex are 695 nm, 1.88x10(4) l mol(-1) cm(-1) and 2.92 ng cm(-2), respectively. A linear calibration graph is obtained up to a concentration of 7.2 mug ml(-1) of manganese. The optimum range for determination (Ringbom) is between 0.20 and 6.8 mug ml(-1). A rapid method for simultaneous determination of manganese and zinc in their mixture using derivative spectra is described. The range 0.28-5.6 mug ml(-1) manganese could be determined in the presence of 0.33-6.8 mug ml(-1) zinc and vice versa. The developed method was applied to the simultaneous spectrophotometric determination of manganese and zinc in some synthetic mixtures and was found to give satisfactory results.     

Molecules in high spin states III: the millimeter/submillimeter-wave spectrum of the MnCl radical (X (7)Sigma(+))

The pure rotational spectrum of the MnCl radical (X (7)Sigma(+)) has been recorded in the range 141-535 GHz using millimeter-submillimeter direct absorption spectroscopy. This work is the first time the molecule has been studied with rotational resolution in its ground electronic state. MnCl was synthesized by the reaction of manganese vapor, produced in a Broida-type oven, with Cl(2). Transitions of both chlorine isotopomers were measured, as well as lines originating in several vibrationally excited states. The presence of several spin components and manganese hyperfine interactions resulted in quite complex spectra, consisting of multiple blended features. Because 42 rotational transitions were measured for Mn(35)Cl over a wide range of frequencies with high signal-to-noise, a very accurate set of rotational, fine structure, and hyperfine constants could be determined with the aid of spectral simulations. Spectroscopic constants were also determined for Mn(37)Cl and several vibrationally excited states. The values of the spin-rotation and spin-spin parameters were found to be relatively small (gamma=11.2658 MHz and lambda=1113.10 MHz for Mn(35)Cl); in the case of lambda, excited electronic states contributing to the second-order spin-orbit interaction may be canceling each other. The Fermi contact hyperfine term was found to be large in manganese chloride with b(F)(Mn(35)Cl)=397.71 MHz, a result of the manganese 4s character mixing into the 12sigma orbital. This orbital is spsigma hybridized, and contains some Mn 4psigma character, as well. Hence, it also contributes to the dipolar constant c, which is small and positive for this radical (c=32.35 MHz for Mn(35)Cl). The hyperfine parameters in MnCl are similar to those of MnH and MnF, suggesting that the bonding in these three molecules is comparable.     

Simultaneous determination of ethanol and glycerol in wines by a flow injection-pervaporation approach with in parallel photometric and fluorimetric detection

A simultaneous method for the determination of ethanol and glycerol in wines based on the coupling of pervaporation-chemical derivatisation-photometric detection for ethanol and biochemical derivatisation-fluorimetric detection for glycerol is proposed. After separation by pervaporation the ethanol is collected in a K(2)Cr(2)O(7) acceptor stream and the Cr(3+) formed is driven to the spectrophotometer and monitored at 600 nm. The determination of glycerol is based on its oxidation by oxidised beta-nicotinamide adenine dinucleotide (beta-NAD(+)) catalysed by glycerol dehydrogenase immobilised on controlled-pore glass, the reduced form of the coenzyme (NADH) being spectrofluorimetrically monitored (lambda(ex)=340 nm, lambda(em)=460 nm). The linear determination range is between 1-20% for ethanol and 2-8 g l(-1) for glycerol, with RSDs 3 and 2%, respectively. The method applied to red and white Spanish wines, compares well with the official methods for these analytes.     

Neutron-activation analysis of manganese in polysulphide materials

A fast non-destructive neutron-activation analysis method has been developed for manganese in polysulphide adhesives. Samples are irradiated for 20 min at a thermal flux of 2 x 10(10) n cm(-2) sec(-1). The net activity in the 0.845-MeV gamma peak of (56)Mn produced by the (n, gamma) reaction in the sample is compared with the activity obtained from a weighed amount of pure manganese irradiated at the same time. Samples containing 2-3% of manganese have been analysed with a relative standard deviation of 2.9%.     

Determination of manganese in high-purity niobium, tantalum, molybdenum and tungsten metals with pan

A spectrophotometric method for the determination of 0.0005-0.10% of manganese in high-purity niobium, tantalum, molybdenum and tungsten metals is described. The matrix materials are separated from the manganese by extraction as cupferrates, after sample dissolution, then the red complex formed between manganese(II) and 1-(2-pyridylazo)-2-naphthol, PAN, is extracted into chloroform from an ammoniacal tartrate-cyanide medium. The absorbance of the extract is determined at 562 mmicro. With the exception of zinc and lead, other impurities present in the four high-purity metals described do not interfere with the proposed method.     

Flow-injection photometric determination of manganese(II) based on its catalysis of the periodate oxidation of N,N'-bis(2-hydroxy-3-sulfopropyl)tolidine

A novel flow-injection spectrophotometric method has been developed for the determination of manganese(II) at sub-nanogram/ml levels. The method is based on its catalytic effect on the oxidation of N,N′-bis(2-hydroxy-3-sulfopropyl)tolidine (HSPT) by periodate. The catalytic effect of manganese(II) was enhanced by the presence of 2,2′-bipyridine as an activator. By monitoring the change in absorbance of the oxidation product of HSPT at 670 nm, manganese(II) ranging 0.02-3.0 ng ml⁻¹ could be determined with the relative standard deviations of less than 2%. The interfering ions were effectively suppressed by the addition of 2,2′-iminodiethanol and citric acid. The proposed method is directly applicable to the determination of manganese in lake and river water samples.     

Direct correlation function for the square-well potential

An analytical expression of direct correlation function (DCF) for the square-well potential is developed. The development is based on the first-order mean spherical approximation and its extension to the functionality of the existing radial distribution function. The developed DCF is a combination of a special polynomial function introduced in this work. The combination is piecewise in four regions [0, lambda - 1], [lambda - 1,2 - lambda], [2 - lambda,1], and [1,lambda] for lambda < 1.5 or [0,2 - lambda], [2 - lambda, lambda - 1], [lambda - 1, 1], and [1, lambda] for lambda > 1.5. In addition, the DCF is continuous to second-order inside hard core and discontinuous at r=1 and r=lambda outside it. The behavior of DCF is analyzed by some detail calculations.     

Spectrophotometric methods for the determination of prazosin hydrochloride in tablets

Four simple and sensitive methods for the assay of prazosin hydrochloride (PRH) are developed. These methods are based on the formation of coloured species by treating it either with excess N-bromosuccinimide (NBS) and determining the unconsumed NBS with p-N-methyl aminophenol sulphate (metol)-sulphanilamide (SA) reagent (method A, lambda(max) 520 nm): with 3-methyl-2-benzothiazolinone hydrazone hydrochloride (MBTH) in the presence of eerie ammonium sulphate (CAS) (method B, lambda(max) 620 nm) or with acidic dyes such as orange-II (O-II) (method C, lambda(max) 490 nm) and alizarin violet 3B (AV-3B) (method D, lambda(max) 570 nm) under the specified experimental conditions. Regression analysis of Beer's law plot showed good correlation in the concentration range of 1.0-10.0, 2.5-25.0, 1.0-17.5 and 2.5-30.0 mug ml for methods A, B, C and D respectively.     

Rapid test methods for minor components analysis of hydraulic cement. Spectrophotometric determination of manganese oxide content of Portland cement and cement raw meal

A rapid, sensitive and highly selective spectrophotometric method for the determination of manganese oxide content of Portland cement and cement raw meal is developed. The method is based on the reaction of manganese(II) with 1,2,4 trihydroxyanthraquinone (purpurin, PURP) in 50% v/v ethanol-water solution at pH 8.5. The solution equilibria of manganese chelates are demonstrated and characterized for delineating optimal conditions of the complexation reaction and analytical aspect of the Mn-PURP system. The analysis of cement materials of variable manganese content is feasible over the concentration range 1.67-8.13 microg ml(-1) Mn, the limit of detection (at the 95% confidence level) of the method is 68 ng ml(-1) for manganese. Under optimum conditions, the use of first derivative spectrophotometry has the advantage of high sensitivity than normal spectrophotometric method and allows the determination of 0.5 microg ml(-1) of manganese.