EPR character of gadolinium complexes with noncyclic polyether Schiff bases and its solvent effects

EPR characters of three new gadolinium complexes with noncydic polyether Schiff bases in powder or organic solvents, including various oxyethylene chain lengths and different substituting groups in ligands, are investigated respectively. Some regularities are summed up. The difference of EPR character in various solvents, particularly at different temperatures, has been examined. The 'single peak effect' due to THF solvent at low temperature is observed for the first time. This phenomenon is explicated.     

Anodic stripping voltammetry with mercury electrodes in extracts of cadmium,lead, thallium and indium diethyldithiocarbamate complexes and analysis of mixtures

The selectivity of the determination of traces of cadmium, lead, thallium and indium is improved by direct coupling of liquid/liquid extraction and anodic stripping voltammetry. Metals are extracted from aqueous solution to benzene or chloroform after the addition of sodium or zinc diethyldithiocarbamate. Stripping voltammetry of Cd, Tl and Pb at a hanging mercury drop electrode or mercury film electrode is done in benzene/methanol medium (1:1) with 0.1 M NaClO₄ as supporting electrolyte. For indium, the medium is chloroform/ethanol/water (1:4:1) with 0.005 M sodium acetate/0.06 M KBr/0.06 M HCl as supporting electrolyte. The complexes in acidic solution can be decomposed by mercury (II) ions, which provides useful shifts of deposition potentials. Calibration graphs are linear at concentrations of about 10^?7 M with a detection limit of 1×10^?8 M. The method is applied to determine a single metal in the presence of a large amount (1000-fold) of interfering metal.     

A heterometric micro-determination of lead with sodium diethyldithiocarbamate

The reaction between lead and sodium diethyldithiocarbamate is studied hcterometrically. The influence of the milieu, conditions of acidity and of different complexing agents, was studied. 0.02–0.04 mg lead per ml of solution can be determined either alone or in the presence of large excesses of other metals. A titration is carried out at 20°C in 8–15 minutes with an error of 0.0–1.0%. The analysed solution may contain ~ 99.5% of the following cations: Ca⁺². Sr⁺², Ba⁺², Mg⁺² Zn⁺², Mn⁺², Ni⁺², Co⁺², Al⁺³, Cr⁺³, Fe⁺³, Cd⁺². Cu⁺², Sb⁺³, Hg⁺², Ag⁺.     

Synthesis and antibacterial activities of metal(II) complexes with Schiff bases derived from 3,5-diiodosalicylaldehyde

Two new Schiff bases (2,4-diiodo-6-[(2-morpholin-4-yl-ethylimino)-methyl]-phenol and 2,4-diiodo-6-[(3-morpholin-4-yl-propylimino)-methyl]-phenol), condensed from 3,5-diiodosalicylaldehyde with 2-morpholinoethylamine and 3-morpholinopropylamine, have been designed and synthesized. Reaction of the Schiff bases with Zn(OAc)₂ · 2H₂O, Cu(OAc)₂ · H₂O, Ni(OAc)₂ · 4H₂O, Co(OAc)₂ · 4H₂O, Cd(OAc)₂ · 2H₂O, Mn(OAc)₂ · 4H₂O, Fe(SO4)₂ · 7H₂O, and Hg(OAc)₂ led to the formation of 16 new mononuclear complexes. The complexes were characterized by UV, Infrared, ESI-MS, and elemental analyses, and 3,5-diiodosalicylalidene-2-morpholinoethylaminozinc(II) (1) and 3,5-diiodosalicylalidene-2-morpholinoethylaminocopper(II) (2) were characterized by single crystal X-ray diffraction. Based on crystal structural analysis of 1 and 2, coupled with their spectral similarity with 3–16, it can be concluded that 3–16 have structures similar to 1 and 2. All the complexes were assayed for antibacterial activities against three Gram positive bacterial strains (Bacillus subtilis, Staphylococcus aureus, and Streptococcus faecalis) and three Gram negative bacterial strains (Escherichia coli, Pseudomonas aeruginosa, and Enterobacter cloacae) by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide method. Among the complexes tested, 8 and 16 showed the most favorable antibacterial activity with minimum inhibitory concentration of 0.781, 12.5, 6.25, 3.125, 3.125, 6.25 and 1.562, 6.25, 1.562, 3.125, 3.125, 1.562 µg mL^?1 against B. subtilis, S. aureus, S. faecalis, P. aeruginosa, E. coli, and E. cloacae, respectively.     

Rhenium(V) complexes with Schiff bases: Synthesis and reaction mechanisms

Summary Some isomers of the ReOX₂LPPh₃ complexes [X = Cl or Br and L =N-methylsalicylideneiminate,N-phenylsalicylideneiminate, halfN,N'-ethylenebis(salicylideneiminate) or 8-hydroxyquinolinate] have been synthesized and characterized. Two different mechanisms for reaction of thetrans-ReOX₃(PPh₃)₂ complexes (X = Cl or Br) with the Schiff bases are supported by qualitative studies on such parameters as the Schiff base ligand form, concentration of free triphenylphosphine ligand, reaction solvent and temperature.     

Exchange interactions in copper(II) complexes with tridentate Schiff bases: EPR and magnetic studies

The influence of the nature of ligands upon the magnetic and EPR properties was investigated for the series of polynuclear Cu(II) complexes with tridentate Schiff bases. A similar tendency of changes in the |J| and D parameters was found for binuclear Cu(II) complexes with ligands derived from condensation of 3-amino-1-propanol with 2-hydroxyaldehydes and acetylacetone as well as for Cu(II) complexes with condensation products of o-aminophenol and β-diketones. The Cu(II) complex with Schiff base of 1-amino-2-propanol and acetylacetone exhibits ferromagnetic behaviour suggesting tetrameric structure.     

Synthesis,characterization, crystal structure,and electrochemical properties of three copper(II) complexes with 3,5-dihalosalicylaldehyde Schiff bases derived from amantadine

Abstract

Complexes 1-3, C₃₄H₃₆X₄CuN₂O₂ (X?=?Cl, Br, I), were synthesized with copper chloride dihydrate and three new Schiff base ligands derived from amantadine and 3,5-dihalosalicylaldehydes. They were characterized by IR, UV–VIS, elemental analysis, molar conductance, and single-crystal X-ray diffraction. Single-crystal X-ray diffraction analysis reveals that 1 and 2 crystallize in the triclinic system, Pī space group. Each asymmetric unit consists of one copper(II) ion, two corresponding deprotonated Schiff base ligands and one lattice dichloromethane molecule. 3 crystallizes in the monoclinic system, P2₁/n space group. Each asymmetric unit consists of one copper(II) ion and two deprotonated iodo- Schiff base ligands. The tetra-coordination of the central copper(II) ion in 1-3 is constructed by two nitrogen atoms and two oxygen atoms from the corresponding Schiff base ligands, forming a distorted tetrahedral geometry. Electrochemical properties of the complexes were determined by cyclic voltammetry.

     

水杨醛酪氨酸铜配合物合成和EPR波谱

A new Schiff base derived from tyrosine and salicylidene and its copper(Ⅱ) complex have been synthesized and characterized by elemental analyses,molar conductances,thermal analyses,infrared spectra,electronic spectra and EPR spectra.The composition of the complex is K[CuL(Ac)]•H2O, where L=H13C16NO4. EPR spectra of the copper(Ⅱ) complex were investigated in various solvents at different temperatures.It is found that the linewidth of four hyperfine lines on solution spectra at room temperature is unequal and changes with mⅠ ,this could be satisfactorily explained by the relaxation effect.The relaxation time and the relaxation rate were calculated.By using spectral parameters from solution spectra at low temperature,the bonding parameters of Cu(Ⅱ) complex were calculated.The bonding characterization and stability of the complex were disscussed.The results show that the in plane 螵瞓ond and the in plane 皙瞓ond in the complex all play an important role.     

3,5-Dimethyl and 3,5-di-tert-butylpyrazolato complexes with alkali metals: monomeric, dimeric, cluster, and 1D chain structures

The pyrazolato complexes [(Me(2)pz)(THF)Li] (1), [((t)Bu(2)pz)Li](4) (2), [((t)Bu(2)pzH)((t)()Bu(2)pz)Li](2) (2a), [(Me(2)pz)Na] (3), [((t)Bu(2)pz)Na](4), [((t)Bu(2)pz)(6)(OH)Na(7)] (4a), [((t)Bu(2)pz)(18-crown-6)Na] (4b), and [((t)Bu(2)pz)K] (5) were synthesized by metalation reactions between R(2)pzH (R = Me, (t)()Bu) and alkyllithium, elemental sodium, or potassium. All the complexes were characterized by spectroscopic methods and microanalysis, and in addition, the crystal structures of 2, 2a, 3, 4a, 4b, and 5 were obtained by single-crystal X-ray diffraction. They show monomeric, dimeric, cluster, and 1D chain structures in the solid state. Ab initio calculations on the structure and stabilities of the monomeric pzM complexes were performed at the MP2 level of theory showing good agreement with the coordination preferences of the pyrazolato ligand to a particular alkali ion.     

Recyclization of 3,5-diacetyl- and 3,5-dicyanopyridinium salts under the influence of bases

Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 6, pp. 848–849, June, 1990.     

Synthesis of complex pyridine bases in the reaction of α,ω)-nitrileacetylenes with acetylene,catalyzed by cobalt complexes

Conclusions Cyclocodimerization of acetylene with , -nitrileacetylenes, catalyzed by a Co(2-ethyl hexanoate)₂-AlEt₃ system gives new types of mono- and bicyclic pyridines.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 7, pp. 1628–1634, July, 1986.     

Thermometric titration of cadmium with sodium diethyldithiocarbamate, with oxidation by hydrogen peroxide as indicator reaction

A new method of end-point indication is described for thermometric titration of cadmium with sodium diethyldithiocarbamate (DDTC). It is based on the redox reaction between hydrogen peroxide added to the system before titration, and the first excess of DDTC. Amounts of cadmium in the range 10-50 mumoles are titrated within 1% error.     

Gold and palladium: their diethyldithiocarbamate complexes. composition,structure and analysis

A study was made of the composition and behaviour of complexes formed at different pH's between gold(III) and palladium(II) with sodium diethyldithiocarbamate. The complexes obtained are: Pd(CBM)₂ (insoluble); [Au(CBM)]⁺² (insoluble); [Au₂(CBM)₃)⁺³ (soluble); [Au(CBM)₂]⁺ (soluble).Analytical methods are presented for the determination of gold and palladium in mixtures. The heterometric curves obtained permit the determination of gold as well as of palladium in a single titration, with an error of 0–2%.     

Radiometric trace analysis of lead with diethyldithiocarbamate and 204T1

Two methods for the determination of submugram amounts of lead are described. (A) Lead is selectively extracted with carbon tetrachloride from an alkaline solution containing exccss diethyl-dithiocarbamatc (DDC) and cyanide. Traces of DDC arc back-extracted. The lead in the DDC complex is exchanged with ²⁰⁴Tl and the amount of ²⁰⁴Tl in the organic layer acts as a measure for the lead. The limit of sensitivity is 0.1 mg; the standard deviation is 11% (for 0. 1μg). Bismuth and thallium interfere; their influence can be accounted for with the help of EDTA, however. (B) Excess cyanide is added to the alkaline sample solution and lead is exchanged selectively with ²⁰⁴Tl by shaking with a CHCl₃ solution containing ²⁰⁴T1(DDC)₁. As the process is not 100% effective (with a reasonable excess of the thallium complex) isotope dilution with ²¹⁰Pb is also carried out. The amount of ²⁰⁴Tl in the aqueous layer acts as a measure for the exchanged lead. The limit of sensitivity is 0.05 μg and the standard deviation is 12% (for 0.05 μg). Bismuth and thallium must be removed in advance, e.g. by anion exchange.     

The reaction of some dibromocyclohexanediones with bases

The reaction of some dibromocyclohexanediones with bases is reported. Elimination of HBr, believed to proceed via cyclopropane intermediates, yields ultimately cyclopentenediones. A possible mechanism is described.