Freshwater suspended particles: An intercomparison of long-term integrating sampling systems used for environmental radioactivity monitoring

Summary Sampling and sample preparation are known to carry large, but typically unknown uncertainty contributions to the final analytical data and there is a lack of qualitative and quantitative data on the comparability of results achieved by different sampling methods. To this end an intercomparison exercise was carried out to compare different methods for the collection of suspended material used for the monitoring of environmental radioactivity in freshwater bodies.This paper presents the results of this intercomparison exercise in which “in situ”particulate sampling devices were compared in field exercises performed in the Kiev Reservoir (Ukraine) and in the Po River (Italy). The main criterion for this intercomparison was the agreement among the¹³⁷Cs activity concentrations associated with the suspended particles expressed as Bq^. g^-1and among the (C/N) molar ratios measured on the suspended particles. In addition, an estimate of the uncertainties associated with each measuring method has been performed.     

Visualisation of proficiency test exercise results in Kiri plots

A novel graphical method (‘Kiri plots’) for the presentation of proficiency test exercise results is presented. The Kiri plot visualises the evaluation of the proficiency test results based on three statistical tests (the z score, the zeta score and the relative uncertainty outlier test) by defining six zones including a central “in agreement” zone.     

Intercomparison of suspended particles sampling methodologies

Sampling and sample preparation/processing are known to carry large, but typically unknown uncertainty contribution to the final analytical data and there is a lack of qualitative and quantitative data on the comparability of results achieved by the different sampling methods. To this end, an intercomparison programme was founded by the European Commission, in which different institutions participated using their own ”in-situ” methods (”ANPA”, ”EDF” and ”MIDIYA”) for collection of water and suspended material in freshwater bodies. The main criterion for this intercomparison was the agreement among the ¹³⁷Cs activity concentrations in the dissolved phase (Bq l^–1), those associated with the suspended particles (Bq g^–1) and the concentrations of total suspended material (TSM) in the water body (mg l^–1). The results show that the sampling systems provide TSM concentration results with low accuracy; on the contrary, they are recommended for the determination of ¹³⁷Cs activity concentration in the dissolved phase. Concerning the determination of radiocaesium activity concentration in the suspended particles, the ”EDF” system provides the more reliable results. Received: 10 December 2001 Accepted: 4 March 2002     

Influence of the out-of-plane distortions of nuclear configurations of molecules with then-AO of the heteroatom directed along theC 2 symmetry axis on spin-orbit coupling between thenπ*- and ππ*-states

This paper studies changes in the matrix elements (U_mp) of spin-orbit coupling between the nπ^*- and ππ^*-states, which are induced by the (“chair,” “bath”) distortions of the nuclear configurations of molecules. The analysis is performed for acridine molecules in which the n-p_z atomic orbital (AO) of the heteroatom is directed along the C₂ symmetry axis. Earlier, for molecules with a planar nuclear configuration of C_2v symmetry and with the heteroatom lying on the C₂ axis, we established the dependence of U_mp on the symmetry of ππ^*-states [Γ(ππ^*)=A₁ or B₂]. The values of U_mp differ by more than one order of magnitude; this is in line with the difference between the interconversion rate constants (K_isc; two or three orders). In this work we have found that this contrast in U_mp (and, accordingly, in K_isc) is retained when the nuclear configuration of the acridine molecule is distorted to the “chair” (AC-A) configuration, although the individuality of both molecular orbital types (nσ-MO and π-MO) and states nπ^* and ππ^* is annihilated to a certain extent. For the “bath” (AC-B) conformation the difference in U_mp considerably diminishes. Reasons for the changes in the matrix elements of spin-orbit coupling and rate constants of the S-T conversion are analyzed. The available energy level diagram is critically analyzed, and a slightly different diagam as well as a scheme of nonradiating deactivation of acridine are suggested. L. Ya. Karpov Physicochemical Scientific Research Institute. Translated fromZhurnal Strukturnoi Khimii, Vol. 36, No. 2, pp. 292–297, March–April, 1995. Translated by L. Smolina     

Essai de comparaison globale des differentes methodes d'analyses de traces dans un standard geochimique

Correspondence Factor Analysis is a multivariate technique that may be applied to any type of data. The principal advantage of this method is related to its simultaneous representation of subjects and variables on the same factorial axis. Two dimensional graphs may be drawn and offer a strong aid in the interpretation of the results. In our case subjects are “analytical methods or laboratories” and variables are “determined elements”.      

Evaluation of a new generation quadrupole-based ICP-MS for uranium isotopic measurements in environmental samples

We compare the analytical performance of a modern quadrupole-based ICP-MS (“X-Series”, Thermo-Electron, Winsford, UK) with a single-collector double-focusing sector-field ICP-MS (“Axiom”, VG Elemental, Winsford, UK) for uranium isotopic measurements in environmental samples. We focus on the precision and accuracy obtained with both instruments for the ²³⁵U/²³⁸U isotopic ratios and on the abundance sensitivity that is a key parameter for low ²³⁶U/²³⁸U isotopic ratios measurements. We observe that isotopic measurements are more precise accurate with the “X-Series” than with the “Axiom”. Besides, we demonstrate that the “Axiom’s” higher abundance sensitivity limits its capability to measure ²³⁶U/²³⁸U ratio below a few ppm.     

Effect of ligand coordination type on the relative stability of linear mercury clusters

The problem of stabilization of linear mercury clusters with acceptor ligands coordinated along the symmetry axis of the cluster is discussed in terms of the MNDO method. It is shown that stable four-membered rings Hg₂Cl₂ may be formed. It is proposed that the structure of linear mercury clusters with side coordination of ligands be described as the result of “polymerization” of short stable linear molecules XHg_nX (n=1, 2) and HgX ₂ ¹⁻ , HgX ₃ ¹⁻ ions with accepting terminal groups. Mordovia State University. Institute of Organoelement Compounds, Russian Academy of Sciences. Translated fromZhurnal Strukturnoi Khimii, Vol. 39, No. 1, pp. 26–34, January–February, 1998. This work was performed in the framework if the interindustry scientific and technical program “Fullerenes and Atomic Clusters.”     

EPMA and Quantitative MCs+-SIMS of Metal-DLC Coating Materials

 Compositional characterization of metal-DLC (metal-containing diamond-like carbon) hard coatings is carried out by (WDS)-EPMA and MCs⁺-SIMS. EPMA enables accurate (± 5% relative) quantitative analysis including minor concentrations (0.1–10 at%) of N, O and Ar. Under conditions of “near-surface” EPMA (E₀ < 10 keV) the influence of surface oxide films on “pure” metal standards may be a limiting factor in respect of accuracy. Depth profiling of sufficiently “thick” layered structures (film thickness ≥ 2 μm) is carried out by EPMA-line scans along mechanically prepared bevels. The depth resolution is about 0.2 μm. SIMS in the MCs⁺-mode enables high resolution (< 20 nm) depth profiling of metal-DLC layered structures including the determination of H (1–20 at%). MCs⁺-SIMS, i.e. employing Cs⁺ primary ions and monitoring MCs⁺ molecular secondary ions (M is the element of interest) is presented as a promising route towards sufficiently accurate (10–20%) SIMS-quantification. Matrix-independent relative sensitivity factors for MCs⁺-SIMS are derived from homogeneous coating materials defined by EPMA. EPMA proves to be also useful to detect problems related to SIMS of Ar in metal-DLC materials. The combination EPMA-SIMS is demonstrated as an effective analytical strategy for quality control in industrial production and to support the development of metal DLC layered structures with optimum tribological properties.     

Deposition of Diamond-like Carbon Films using Graphite Sputtering in Neon Dense Plasma

This paper reports the deposition of diamond-like carbon (DLC) films on Si <100>, using a low energy (1.45 kJ) dense plasma focus assisted sputtering of graphite insert at the tip of the tapered anode. The substrates are placed in front of the anode at different axial and angular positions and are exposed to multiple focus shots. The information regarding the DLC structure is acquired by using Raman spectroscopy. The spectra are characterized by two broad bands known as “G-band” and “D-band”. The results point towards the formation of DLC films with both sp³ (diamond like) and sp² (graphite like) domains. In X-ray diffraction (XRD) pattern, no additional peak is observed except a peak at 2θ = 69° which corresponds to the silicon (Si) substrate. The intensity of Si peak is reduced after treatment indicating the deposition of amorphous carbon. Scanning electron microscopy (SEM) results demonstrate that the smoothness of the film increases with increasing the substrate angular positions with respect to the anode axis. Energy dispersive X-ray (EDX) analysis reveals that the films deposited at lower axial and angular positions are thicker which is complemented by the cross-sectional views of the films.     

Overview of reduced dimensionality quantum approaches to reactive scattering

 In this overview I discuss recent advances as well as outstanding issues in reduced dimensionality quantum approaches to reactive scattering. “Reduced dimensionality” in the present context signifies treating a subset of all degrees of freedom (the most strongly coupled ones) by rigorous quantum methods and treating the remaining (weakly coupled) degrees of freedom by a variety of approximate methods, ranging from simple, so-called energy shifts to more elaborate adiabatic treatments. The most widely used example of this approach is termed “J-shifting”, and this overview will concentrate on this method and discuss its application and generalization to both “direct” and “complex” reactions, exemplified by O(³P) + HCl and O(¹D) + HCl, respectively. In addition, for O(³P) + HCl, resonances in the tunneling region, due to van der Waals wells, are discussed and their challenge to reduced dimensionality methods is stressed. Another new aspect of the reduced dimensionality treatment of polyatomic reactions is the need to describe anharmonicity in a consistent fashion. This is exemplified by the H + CH₄ reaction. Received: 3 February 2002 / Accepted: 8 April 2002 / Published online: 19 August 2002     

A facile electrochemical synthesis of covellite nanomaterials at room temperature

A novel method for the electrochemical synthesis of covellite (CuS) nanoparticles (NPs) in aqueous phase was developed. In this experiment, thioglycerol (TG) is used as the catalyst for the hydrolysis of sodium thiosulfate, the sulfur source for the synthesis of CuS. Cu foil, which acts as the sacrificing anode, is oxidized to Cu²⁺ by applying a potential of 0.5 V while OH^- was produced on the cathode surface at the same time. The production of OH^- facilitates the reaction between Cu²⁺ and thiosulfate under the catalysis of TG. The evolution of hydrogen bubbles effectively prevents the deposition of copper sulfide on the cathode. Copper sulfide sols of “golden-brown”, and “dark-green” forms can be obtained by varying the concentration of TG. The “golden-brown” copper sulfide sols are also observed to convert to the green form with time, and the rate of this conversion process is faster at higher temperatures. X-ray diffraction (XRD) and chemical analysis indicate that the “dark-green” form of product is pure hexagonal phase CuS. The obtained CuS NPs were covered by a layer of TG as suggested by Fourier transform infrared (FTIR) data. The size and morphology of the particles are studied by transmission electron microscope (TEM).     

<Superscript>3</Superscript>H and <Superscript>90</Superscript>Sr in urine radiobioassay intercomparison results from the intercomparison studies program at Oak Ridge National Laboratory: statistical analysis of laboratory performance

The Intercomparison Studies Program (ISP) at the Oak Ridge National Laboratory (ORNL, Oak Ridge, TN USA) provides natural-matrix human urine quality-assurance/quality-control (QA/QC) samples to radiobioassay analysis laboratories. Samples are provided to these laboratories as “single-blind” or “double-blind” unknowns, spiked with radioactive-solution standards at “low” levels (e.g., 0.7–7 Bq g⁻¹ for ³H and 0.7–7 Bq kg⁻¹ for ⁹⁰Sr). Participants use the results as a tool for self-evaluation and a measure of performance. In this paper, sample preparation and the results of testing during the years 2001–2005 for ³H and ⁹⁰Sr are presented and discussed.     

Phase equilibria in binary subsystems of urea–biuret–water system

Joint results of the differential scanning calorimetry (DSC) and thermogravimetry (TG) experiments were the basis for the fusion enthalpy and temperature determination of the biuret (NH₂CO)₂NH (synthesis by-product of the urea fertilizer (NH₂)₂CO). Recommended values are Δ_m H = (26.1 ± 0.5) kJ mol⁻¹, T _m = (473.8 ± 0.4) K. The DSC method allowed for the phase diagrams of “water–biuret,” “water–urea,” “urea–biuret” binary systems to be studied; as a result, liquidus and solidus curves were precisely defined. Stoichiometry and decomposition temperature of the biuret hydrate identified, composition of the compound in “urea–biuret” system was suggested.     

A simple laboratory-based radon calibration system

Measurements of ²²²Rn (“radon”) in the environment are important in the geosciences and radiation-protection fields. We demonstrate here a simple laboratory-based calibration system to evaluate the efficiency of radon detectors with a reproducibility of about ±2%. The system uses a closed-loop air circulation design with ²²⁶Ra adsorbed onto MnO₂-impregnated fiber as a radon source. Two RAD7 radon detectors (Durridge Co., Inc.) that were precisely calibrated at Durridge’s in-house calibration facility are used as secondary standards. By parallel analysis of the radon-enriched air within the closed loop, the test RAD7s are assigned a calibration coefficient to be applied to future measurements. We also performed a side-by-side intercomparison with two RAD7s in a high-radon natural environmental setting (limestone cave in Florida) that produced comparable results.     

Spontaneous fission yields for 238U in molybdenum measured in Archaean zircons

The relative cumulative fission yields of ^95,97,98,100Mo produced by spontaneous fission of ²³⁸U contained in Archaean zircons, were measured by sensitive thermal ionization mass spectrometry (TIMS). The relative yields for ^95,97,98,100Mo are 0.58 : 1.08 : 1.04 : 1.0, respectively. Combined with mass spectrometrically-determined ^{99,101,102,104}Ru fission yields,¹ the mass distribution from 95￡A￡104 can be delineated. Assuming an “absolute” fission yield of 6.1±0.4% for the cumulative fission yield at mass 97, it is possible to express the Mo and Ru relative spontaneous fission yields for ²³⁸U as “absolute” values. There is no evidence for a significant isotope anomaly at mass 98. This revised version was published online in July 2006 with corrections to the Cover Date.     

Probe—detektor-anordnungen zur Kernstrahlungsmessung für Analytische Zwecke

The “analytical power” of detection systems is investigated, considering typical arrangements in analytical terms. From N atoms of interest in a sample Z counts are drawn: Z=R N (R registration yield). Crude data ZM contain also background U generated by interferences: ZM=Z+U. Identification and separation of Z is accompanied by errors ~σ_MU^1/2 due to imperfect distinguishability and to statistical error (σ_M model inherent factor). With “selectivity”=σ_M ^- (R/R_interference)^1/2 the figure of merit is G=selectivity efficiency/interference)^1/2. Sample background dominating, “interference” or both “interference” and “efficiency” have to be cancelled. Present semiconductor spectrometry of low energy γ-quanta and of large rates is not very far from its limits. Further progress will be obtained by enhancement of high energy efficiency and reduction of natural background.      

A new algorithm for the fixed-node quantum Monte Carlo method

A novel algorithm is proposed for the fixed-node quantum Monte Carlo (FNQMC) method.In contrast to previous procedures,its "guiding function" is not optimized prior to diffusion quantum Monte Carlo (DMC) computation but synchronistically in the diffusion process The new algorithm can not only save CPU time,but also make both of the optimization and diffusion carried out according to the same sampling fashion,reaching the goal to improve each other This new optimizing procedure converges super-linearly,and thus can accelerate the particle diffusion During the diffusion process,the node of the "guiding function" changes incessantly,which is conducible to reducing the "fixed-node error" The new algorithm has been used to calculate the total energies of states X3B1 and a1A1 of CH2 as well as π-X2B1 and λ-2A1 of NH2 The singlet-triplet energy splitting (λEsT) in CH2 and π energy splitting in NH2 obtained with this present method are (45 542±1.840) and (141.644±1.589) kJ/mol,respectively The calculated     

Plutonium and americium concentrations and vertical profiles in some Italian mosses used as bioindicators

We have examined the uptake of actinide elements Am and, Pu by different species of lichen and moss collected in two locations (Urbino, Central Italy; Alps region, North-east Italy). Plutonium and americium were separated and determined by extraction chromatography, electrodeposition and alpha-spectrometry. This paper summarizes our results with a special emphasis on the vertical profiles of these actinides in two different species of mosses. Several 1–2 cm depth sections were obtained and dated by²¹⁰Pb method. A typical peak for^239,240Pu and²⁴¹Am was found in the very old moss species (“Sphagnum Compactum”) at a depth corresponding to the period 1960–1970 which was the period characterized by the maximum nuclear weapon tests. In a younger moss species (“Neckeria Crispa”) no peak was observed and the regression curves showed that Am is more mobile than^239,240Pu and²³⁸Pu.     

Probing interaction of melittin with lipid membranes using liquid secondary ion mass spectrometry

Ｔｈｅｐｒｏｃｅｓｓｏｆｍｅｍｂｒａｎｅｉｎｓｅｒｔｉｏｎｏｆｔｈｅｔｏｘｉｃｐｒｏｔｅｉｎｃａｎｂｅｄｉｖｉｄｅｄｉｎｔｏｔｗｏｓｔｅｐｓ:ａｂｓｏｒｐｔｉｏｎａｎｄｉｎｓｅｒｔｉｏｎ.Ｔｈｅｐｒｏｔｅｉｎｍｏｌｅｃｕｌｅｓｆｉｒｓｔｉｎｔｅｒａｃｔｗｉｔｈｔｈｅｍｅｍｂｒａｎｅｓｕｒｆａｃｅａｎｄｂｅｃｏｍｅａｄｓｏｒｂｅｄｏｎｔｏｔｈｅｍｅｍｂｒａｎｅｔｈｒｏｕｇｈｓｔａｔｉｃｅｌｅｃｔｒｉｃｉｔｙ.Ｔｈｅｃｏｎｆｏｒｍａｔｉｏｎｏｆｔｈｅｔｏｘｉｃｐｒｏｔｅｉｎｗｉｌｌｃｈａｎｇｅｕｎｄｅ…     

A comparative study of in- and post-source decays of peptide and preformed ions in matrix-assisted laser desorption ionization time-of-flight mass spectrometry: Effective temperature and matrix effect

In-source decay (ISD) and post-source decay (PSD) of a peptide ion ([Y₆ + H]⁺) and a preformed ion (benzyltriphenylphosphonium, BTPP) generated by matrix-assisted laser desorption ionization (MALDI) were investigated with time-of-flight mass spectrometry. α-Cyano-4-hydroxycinammic acid (CHCA) and 2,5-dihydroxybenzoic acid (DHB) were used as matrices. For both ions, ISD yield was unaffected by delay time, indicating rapid termination of ISD. This was taken as evidence for rapid expansion cooling of hot “early” plume formed in MALDI. CHCA was hotter than DHB for [Y₆ + H]⁺ while the matrix effect was insignificant for BTPP. The “early” plume temperature estimated utilizing previous kinetic results was 800–900 K, versus 400–500 K for “late” plume. The results support our previous finding that the temperature of peptide ions interrogated by tandem mass spectrometry was lower than most rough estimates of MALDI temperature.