Membrane Introduction Mass Spectrometry (MIMS): A Versatile Tool for Direct,Real‐Time Chemical Measurements

Membrane introduction mass spectrometry (MIMS) is a direct, continuous, on‐line measurement technique. It utilizes a membrane to semi‐selectively transfer analyte mixtures from a sample to a mass spectrometer, rejecting the bulk of the sample matrix, which can be a gas, liquid or solid/slurry. Analyte selectivity and sensitivity are affected by optimizations at the membrane, ionization and the mass spectrometer levels. MIMS can be roughly classified by the acceptor phase that entrains analyte(s) to the mass spectrometer after membrane transport, either a gaseous acceptor phase (GP‐MIMS) or condensed acceptor phase (CP‐MIMS). The aim of this article is to provide an introduction to MIMS as a technique and to explore current variants, recent developments and modern applications, emphasizing examples from our group, the Applied Environmental Research Laboratories as well as selected work from others in this emerging area. Also provided is a synopsis of current and future directions for this versatile analytical technique. Copyright © 2014 John Wiley & Sons, Ltd.     

A semi‐quantitative approach for the rapid screening and mass profiling of naphthenic acids directly in contaminated aqueous samples

We report the use of a direct sampling, online analytical approach for the determination of acid extractable naphthenic acids in complex aqueous samples, known as condensed phase membrane introduction mass spectrometry (CP‐MIMS). The technique employs a capillary hollow fibre semi‐permeable membrane probe configured for immersion into a pH adjusted sample. A continuously flowing methanol acceptor phase transfers naphthenic acids to an electrospray ionization source, operated in negative ion mode, whereupon they are analysed by mass spectrometry as [M–H]^? ions. High‐resolution mass spectrometry is used to characterize the influence of sample pH on membrane transport of multiple components of complex naphthenic acid mixtures. We demonstrate the use of CP‐MIMS for semi‐quantitative analysis of real‐world samples using selected ion monitoring and full scan mass spectra at unit mass resolution. The technique has also been employed to continuously monitor the temporal evolution in the mass profile and concentrations of individual naphthenic acid isomer classes in heterogeneous solutions during adsorption processes. Copyright © 2015 John Wiley & Sons, Ltd.     

Ultra‐high performance supercritical fluid chromatography of lignin‐derived phenols from alkaline cupric oxide oxidation

Traditional chromatographic methods for the analysis of lignin‐derived phenolic compounds in environmental samples are generally time consuming. In this work, an ultra‐high performance supercritical fluid chromatography method with a diode array detector for the analysis of major lignin‐derived phenolic compounds produced by alkaline cupric oxide oxidation was developed. In an analysis of a collection of 11 representative monomeric lignin phenolic compounds, all compounds were clearly separated within 6 min with excellent peak shapes, with a limit of detection of 0.5–2.5 μM, a limit of quantification of 2.5–5.0 μM, and a dynamic range of 5.0–2.0 mM (R² > 0.997). The new ultra‐high performance supercritical fluid chromatography method was also applied for the qualitative and quantitative analysis of lignin‐derived phenolic compounds obtained upon alkaline cupric oxide oxidation of a commercial humic acid. Ten out of the previous eleven model compounds could be quantified in the oxidized humic acid sample. The high separation power and short analysis time obtained demonstrate for the first time that supercritical fluid chromatography is a fast and reliable technique for the analysis of lignin‐derived phenols in complex environmental samples.     

Phenol‐Derived Carbon Sealant Inspired by a Coalification Process

Recently, emerging functions utilizing phenolic molecules, such as surface functionalizing agents or bioadhesives, have attracted significant interest. However, the most important role of phenolic compounds is to produce carbonized plant matter called “coal”, which is widely used as an energy source in nearly all countries. Coalification is a long‐term, high‐temperature process in which phenols are converted into conducting carbonized matter. This study focuses on mimicking coalification processes to create conducting sealants from non‐conducting phenolic compounds by heat treatment. We demonstrate that a phenolic adhesive, tri‐hydroxybenzene (known as pyrogallol), and polyethylenimine mixture initially acts as an adhesive sealant that can be converted to a conducting carbon sealing material. The conductivity of the phenolic sealant is about 850 Ω^?1 cm^?1, which is an approximately two‐fold enhancement of the performance of carbon matter. Applications of the biomimetic adhesives described herein include conducting defect sealants in carbon nanomaterials and conducting binders for metal/carbon or ceramic/carbon composites.     

Chitosan‐Supported Ni particles: An Efficient Nanocatalyst for Direct Amination of Phenols

A practical method for the direct amination of phenols using 2,4,6‐trichloro‐1,3,5‐triazine (TCT) as an efficient promotor for the activation of phenols in the presence of an efficient and recyclable heterogeneous catalyst prepared by immobilization of nickel particles on triazole modified chitosan is described. This heterogeneous catalyst has demonstrated a promising activity for the conversion of phenolic compounds to their corresponding amine under mild conditions. Moreover, the obtained catalyst can be reused in five consecutive runs with consistent catalytic activity.     

One‐Pot Alkoxylation of Phenols with Urea and 1,2‐Glycols

A one‐pot epoxide‐free alkoxylation process has been developed for phenolic compounds. The process involves heating phenols and urea in 1,2‐glycols at 170‐190 °C using Na₂CO₃/ZnO as co‐catalysts under atmospheric conditions. During the course of this new alkoxylation reaction, a five‐membered ring cyclic carbonate intermediate, ethylene carbonate (EC) or propylene carbonate (PPC), was produced in‐transit as the key intermediate and was subsequently consumed by phenols to form alkoxylated ether alcohols as final products in excellent yields. For instance, phenol, bisphenol A (BPA), hydroquinone and resorcinol were converted into their respective mono‐alkoxylated ether alcohols on each of their phenolic groups in 80‐95% isolated yields. In propoxylation of phenols, this approach shows great product selectivity favoring production of high secondary alcohols over primary alcohols in isomeric ratios of nearing 95/5. Since ammonia (NH₃) and carbon dioxide (CO₂) evolving from the reaction can be re‐combined in theory into urea for re‐use, the overall net‐alkoxylation by this approach can be regarded as a simple condensation reaction of phenols with 1,2‐glycols giving off water as its by‐product. This one‐pot process is simple, safe and environmentally friendlier than the conventional alkoxylated processes based on ethylene oxide (EO) or propylene oxide (PO). Moreover, this process is particularly well‐suited for making short chain‐length alkoxyether alcohols of phenols.     

Determination of phenolic compounds in water using membrane inlet mass spectrometry

Two membrane inlet mass spectrometric (MIMS) methods for determining phenolic compounds in water are described and compared, namely direct analysis and analysis after acetylation of the phenolic compounds. Direct analysis of phenolic compounds in water is a very simple and rapid method and detection limits are relatively low (from 30 mug 1(-1) for phenol to 1000 mug 1(-1) for 4-nitrophenol). Analysis of phenolic compounds after aqueous acetylation is also a very simple and rapid method, and the detection limits are even two orders of magnitude lower than in the direct analysis. For example the detection limit of phenol acetate is 0.5 mug 1(-1) and that of 4-nitrophenol is 10 mug 1(-1). The acetylation method was also tested in the analysis of phenolic compounds from contaminated surface water samples.     

Preparation,characterization and application of powdered activated carbon‐cellulose acetate phthalate mixed matrix membrane for treatment of steel plant effluent

Preparation, characterization and industrial application of a mixed matrix membrane (MMM) using powdered activated carbon (PAC) in cellulose acetate phthalate (CAP) have been reported in this study. The objective of this work is to fabricate a less energy intensive, highly selective (to phenolic compounds) adsorptive membrane with high throughput in a scalable platform for simultaneous removal of organic as well chemical oxygen demand (COD) from a steel plant effluent. The membrane with 25 wt% PAC has maximum adsorption capacity of phenol 35 mg/g at pH 5.5. Effluent with total phenolic compounds (23 mg/g) and COD of 5200 mg/l is treated in continuous cross‐flow configuration. Breakthrough time is 44 hr for a filtration area of 0.008 m² with total phenol concentration in permeate as per World Health Organization (WHO), 1 mg/l. Throughput of the system is high, 40 l/m² hr at transmembrane pressure drop 276 kPa and cross‐flow rate 20 l/hr. Maximum rejection of phenol is obtained at low pressure and cross‐flow rate. Removal of phenolic compounds is achieved by adsorption by PAC in CAP matrix and satisfactory reduction of COD and complete removal of non‐volatile solids are due of sieving mechanism. A simple chemical regeneration method is proposed to recover the permeate flux beyond 90%. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis and antimicrobial activity of 2,10‐dichloro‐6‐substituted‐4,8‐dinitro‐12H‐dibenzo[d,g][1,3,2]dioxaphosphocin 6‐oxides/sulfides

Novel 2,10‐dichloro‐6‐substituted‐4,8‐dinitro‐12H‐dibenzo[d,g][1,3,2]dioxaphosphocin 6‐oxides ( 4a–h ) were synthesized by reacting 5,5′‐dichloro‐3,3′‐dinitro‐2,2′‐dihydroxydiphenylmethane ( 2 ) with different aryl phosphorodichloridates ( 3a–g ) or bis(2‐chloroethyl)phosphoramidic dichloride ( 3h ) in the presence of triethylamine at 55–60°C, and the compounds 4i–l were prepared by reacting the 2,6,10‐trichloro‐4,8‐dinitro‐12H‐dibenzo[d,g][1,3,2]dioxaphosphocin 6‐sulfide ( 5 ) in situ with substituted phenols and thiophenol 5 was prepared by condensing 2 with thiophosphoryl chloride. IR, ¹H, ¹³C, ³¹P NMR, and mass spectra supported all the proposed structures. Several title compounds exhibited significant activity in the assays against the bacteria Bacillus subtilis and Escherichia coli and fungi Curvularia lunata and Aspergillus niger. © 2001 John Wiley & Sons, Inc. Heteroatom Chem 12:10–15, 2001     

Sterically hindered phenols in negative ion mobility spectrometry–mass spectrometry

Negative corona discharge atmospheric pressure chemical ionization (APCI) was used to investigate phenols with varying numbers of tert‐butyl groups using ion mobility spectrometry–mass spectrometry (IMS‐MS). The main characteristic ion observed for all the phenolic compounds was the deprotonated molecule [M–H]⁻. 2‐tert‐Butylphenol showed one main mobility peak in the mass‐selected mobility spectrum of the [M–H]⁻ ion measured under nitrogen atmosphere. When air was used as a nebulizer gas an oxygen addition ion was seen in the mass spectrum and, interestingly, this new species [M–H+O]⁻ had a shorter drift time than the lighter [M–H]⁻ ion. Other phenolic compounds primarily produced two IMS peaks in the mass‐selected mobility spectra measured using the [M–H]⁻ ion. It was also observed that two isomeric compounds, 2,4‐di‐tert‐butylphenol and 2,6‐di‐tert‐butylphenol, could be separated with IMS. In addition, mobilities of various characteristic ions of 2,4,6‐trinitrotoluene were measured, since this compound was previously used as a mobility standard. The possibility of using phenolic compounds as mobility standards is also discussed. Copyright © 2009 John Wiley & Sons, Ltd.     

Syntheses of symmetric and unsymmetric 2,6‐bis(phosphino)phenols

Compounds bearing the structural motif of 2,6‐bis(phosphino)phenol have been synthesized via two general methods. Double lithium‐halogen exchange occurred in low‐temperature reactions of O‐protected (by methyl‐ or tetrahydropyranyl groups) 2,6‐dibromo‐4‐methylphenol derivatives with BuLi (2 equivalents); quenching the reaction mixtures with chlorophosphines ClPR₂ (R = Ph, ⁱPr) and corresponding O‐deprotection yielded symmetrically substituted 2,6‐bis(phosphino)phenols. Sequential incorporation of  PR₂ functionalities was accomplished via single lithium‐halogen exchange (1 eq. of BuLi) of tetrahydropyranyl‐protected 2,6‐dibromo‐4‐methylphenol followed by ClPR₂ quenches, thus enabling the syntheses of unsymmetric 2,6‐bis(phosphino)phenols. Such compounds were also obtained via sequential ortho‐lithiations of tetrahydropyranyl‐protected 4‐tert‐but ylphenol, followed by ClPR₂ quenches. All of the new compounds have been characterized by spectrometric methods (¹H and ³¹P NMR, and mass spectrometry). In addition, two of the compounds, 1‐(diphenylphosphino)‐3‐(diphenylphosphoryl)‐2‐methoxy‐5‐methylbenzene ( 3a‐ox ) and 1,3‐bis(diphenylphosphino)‐2‐methoxy‐5‐methylbenzene ( 6a ) have also been characterized via single crystal X‐ray diffraction experiments. © 2006 Wiley Periodicals, Inc. Heteroatom Chem 17:656–663, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20251     

A Highly Selective and Sensitive Barium(II)‐Selective PVC Membrane Based on Dimethyl 1‐Acetyl‐8‐oxo‐2,8‐dihydro‐ 1H‐pyra‐zolo[5,1‐a]isoindole‐2,3‐dicarboxylate

A poly(vinyl chloride)‐based membrane of dimethyl 1‐acetyl‐8‐oxo‐2,8‐dihydro‐1H‐pyra‐zolo[5,1‐a]isoindole‐2,3‐dicarboxylate as a neutral carrier with sodium tetraphenylborate (NaTPB) as an anion excluder and 2‐nitrophenyl octyl ether (NPOE) as plasticizer was prepared and investigated as a Ba(II)‐selective electrode. The electrode exhibits a Nernstian slope of 29.7±0.4 mV per decade over a wide concentration range (1.0×10^?6 to 1.0×10^?1 M) with a detection limit of 7.6×10^?7 M between pH 3.0 and 11.0. The response time of the sensor is about 10 s and it can be used over a period of 2 months without any divergence in potential. The proposed membrane sensor revealed good selectivity for Ba(II) over a wide variety of other metal ions. It was successfully used in direct determination of barium ions in industrial wastewater samples.     

Study of the Responses of a Sonogel‐Carbon Electrode Towards Phenolic Compounds

The electrochemical behavior of a sonogel‐carbon electrode towards nine phenolic compounds (chloro‐, nitro‐ and alkyl‐phenols) was studied; one of them (4‐chloro‐3‐methylphenol) was used to evaluate characteristics of the electrode, such as accumulation and cleaning procedure of the electrode surface, reproducibility of the measurements, and influence of time from fabrication on electrochemical response. A polyethyleneglycol‐modified sonogel‐carbon electrode was found to improve the electrochemical response towards the analyte. A linear relationship between peak height and concentration in the range 0.005–0.5 mg L^?1 was obtained, with a detection limit of 2.8 μg L^?1. The studies of electrochemical parameters, as well as interferences, are also included.     

Direct Asymmetric Dearomatization of 2‐Naphthols by Scandium‐Catalyzed Electrophilic Amination

Catalytic asymmetric aminative dearomatization of 1‐substituted 2‐naphthols was successfully implemented with electrophilic azodicarboxylates under the catalysis of chiral Sc^III/pybox complexes. This intermolecular reaction represents a hitherto unknown enantioselective C? N bond‐forming process through direct dearomatization of phenolic compounds to generate chiral nitrogen‐containing quaternary carbon stereocenters.     

Scavenging activity of C4‐hydroxyphenyl‐ and polyhydroxyphenyl‐1,4‐dihydropyridines toward free radicals

The radical‐scavenging ability of synthesized C4‐phenolic‐substituted 1,4‐dihydropyridines (1,4‐DHPs) toward 2,2‐diphenyl‐1‐picrylhydrazyl (DPPH^?) and alkyl/alkylperoxyl ABAP‐derived radicals at pH 7.4 was assessed by UV–visible spectroscopy. Reactivity of 1,4‐DHPs toward DPPH^? was measured by following the decay of the absorption corresponding to the radical λ_max at 525 nm, permitting the calculation of EC₅₀, t_EC50, and antiradical efficiency values. Pseudo–first‐order kinetic rate constants for the reactivity between the C4‐phenolic‐substituted 1,4‐DHP compounds and alkyl/alkylperoxyl ABAP‐derived radicals were followed by the decrease in λ_max at 356 nm corresponding to 1,4‐DHP moiety. C4‐phenolic‐substituted 1,4‐DHPs were more reactive toward alkyl free radicals than the other tested radicals. The 3,4,5‐trihydroxyphenyl‐1,4‐DHP was the most reactive derivative toward this radical with a kinetic rate constant value of 513.2 s^?1. Also, this derivative was the most effective toward the DPPH^? radical with the lowest EC₅₀ value (5.08 µM). Comparative studies revealed that synthesized 1,4‐DHPs were more reactive than commercial 1,4‐DHPs. The scavenging mechanism involves the contribution of both pharmacophores, that is, hydroxyphenyl and 1,4‐DHP rings, which was supported by the identification of the reaction products. © 2012 Wiley Periodicals, Inc. Int J Chem Kinet 44: 810–820, 2012     

Development and validation of stir bar sorptive extraction of polar phenols in water followed by HPLC separation in poly(vinylpyrrolididone‐divinylbenzene) monolith

An effective and simple method for polar phenols in water matrix was developed by using stir bar sorptive extraction (SBSE) based on a hydrophilic poly(vinylpyrrolididone‐divinylbenzene) (VPDB) monolithic material and HPLC analysis. To achieve optimum extraction performance for phenols, several parameters, including extraction and desorption time, desorption solvent, pH value, and ionic strength of sample matrix, were investigated. Under the optimized experimental conditions, eight phenols were directly enriched from water samples and analyzed by HPLC‐DAD. The detection limits (S/N = 3) and quantification limits (S/N = 10) of the proposed method for the target compounds were achieved within the range of 0.72–1.37 and 2.40–4.27 ng/mL from spiked water, respectively. Recoveries of eight phenolic compounds were found in the range of 55.2–95.9%. The calibration curves showed the linearity ranging from 5 to 150 ng/mL with linear regression coefficient R² values above 0.98. Method repeatability presented as intra‐ and interday precisions were also found with the RSDs less than 4.10 and 7.61%, respectively. The distribution coefficients between VPDB and water (K_VPDB/W) for phenolic compounds were also calculated and compared with K_O/W. Finally, the proposed method was successfully applied to the determination of the target compounds in tap water, sea water and wastewater samples.     

A sensitive and efficient method for trace analysis of some phenolic compounds using simultaneous derivatization and air‐assisted liquid–liquid microextraction from human urine and plasma samples followed by gas chromatography–nitrogen phosphorous detection

In present study, a simultaneous derivatization and air‐assisted liquid–liquid microextraction method combined with gas chromatography–nitrogen phosphorous detection has been developed for the determination of some phenolic compounds in biological samples. The analytes are derivatized and extracted simultaneously by a fast reaction with 1‐flouro‐2,4‐dinitrobenzene under mild conditions. Under optimal conditions low limits of detection in the range of 0.05–0.34 ng mL^?1 are achievable. The obtained extraction recoveries are between 84 and 97% and the relative standard deviations are less than 7.2% for intraday (n = 6) and interday (n = 4) precisions. The proposed method was demonstrated to be a simple and efficient method for the analysis of phenols in biological samples. Copyright © 2015 John Wiley & Sons, Ltd.     

Facile syntheses and antimicrobial studies of 6‐(aryloxy/arylthio/chloroethoxy)‐2,10‐dichloro‐4,8‐dinitro‐12‐trichloromemyl‐12H‐dibenzo[d,g][13,2]dioxaphosphocin 6‐oxides

Synthesis of several novel 6‐aryloxy/arylmio/chloroethoxy‐2,10‐dichloro‐4,8‐dinitro‐12‐trichloro‐memyl‐12H‐dibenzo[d,g][1,3,2]dioxaphosphocin 6‐oxides ( 4a‐k ) was accomplished by reacting 2,2‐bis (2‐hydroxy‐5‐chloro‐3‐nitrophenyl)‐1,1,1‐trichloroethane 2 with different aryl phosphorodichloridates ( 3a‐g ) and O‐2‐chloroethyl phosphoryldichloride ( 3h ) in the presence of triethylamine in dry toluene at 60–65 °C. Actually some of these compounds were prepared by reacting monochloride 5 resulting from the condensation of phosphorus oxychloride with 2 in situ, with different phenols and thiophenols. The chemical structures were confirmed by elemental, ir and ¹H, ¹³C, ³¹P nmr and mass spectral data analyses. These compounds were screened for antifungal activity against Aspergillus flavus, Alternaria alternata, Fusarium solani, Curvularia lunata and Pyricularia oryzae and antibacterial activity on Bacillus subtilis, Staphylococcus aureus, Escherichia coli, Pseudomonas syringae and Klebsiella pneumoniae. Some of them possessed significant activity.     

Synthesis of 1‐silacyclopent‐2‐ene derivatives using 1,2‐hydroboration, 1,1‐organoboration and protodeborylation

The reaction of di(alkyn‐1‐yl)vinylsilanes R¹(H₂C═CH)Si(C≡C―R)₂ (R¹ = Me ( 1 ), Ph ( 2 ); R = Bu (a), Ph (b), Me₂HSi (c)) at 25°C with 1 equiv. of 9‐borabicyclo[3.3.1]nonane (9‐BBN) affords 1‐silacyclopent‐2‐ene derivatives ( 3a , 3b , 3c , 4a , 4b ), bearing one Si―C≡C―R function readily available for further transformations. These compounds are formed by consecutive 1,2‐hydroboration followed by intramolecular 1,1‐carboboration. Treated with a further equivalent of 9‐BBN in benzene they are converted at relatively high temperature (80–100°C) into 1‐alkenyl‐1‐silacyclopent‐2‐ene derivatives ( 5a , 5b 6a , 6b ) as a result of 1,2‐hydroboration of the Si―C≡C―R function. Protodeborylation of the 9‐BBN‐substituted 1‐silacyclopent‐2‐ene derivatives 3 , 4 , 5 , 6 , using acetic acid in excess, proceeds smoothly to give the novel 1‐silacyclopent‐2‐ene ( 7 , 8 , 9 , 10 ). The solution‐state structural assignment of all new compounds, i.e. di(alkyn‐1‐yl)vinylsilanes and 1‐silacyclopent‐2‐ene derivatives, was carried out using multinuclear magnetic resonance techniques (¹H, ¹³C, ¹¹B, ²⁹Si NMR). The gas phase structures of some examples were calculated and optimized by density functional theory methods (B3LYP/6‐311+G/(d,p) level of theory), and ²⁹Si NMR parameters were calculated (chemical shifts δ²⁹Si and coupling constants ⁿJ(²⁹Si,¹³C)). Copyright © 2014 John Wiley & Sons, Ltd.     

LC‐DAD‐ESI‐MS/MS–based phenolic profiling and antioxidant activity in Turkish cv. Nizip Yaglik olive oils from different maturity olives

The current study was designed to find out how olive maturity indices (2.5, 3.5, and 4.5) affect the individual phenolic compounds and antioxidant potencies of olive oils produced from cv. Nizip Yaglik olives. Liquid chromatography coupled to diode array detection and electrospray ionization tandem mass spectrometry in multiple reaction monitoring mode was utilized for the determination of phenolic composition qualitatively and quantitatively. Findings asserted a quite similar phenolic profile (14 phenols) depending on the various phenolic groups in all oils, while the concentration of total and individual phenolic compounds revealed significant differences between the samples statistically (p < 0.05). Among the individual phenolic classes in all samples, secoiridoids were the most prevailing group and their total content showed a clear significant decline as the olive fruits get ripened. Antioxidant potency values showed a clear diminution attitude during the maturation of the olives. The principal component analysis revealed that oils were discriminated from each other according to phenolic compounds and antioxidant potencies. Moreover, oils obtained from the unripe and medium‐ripe fruits possessed a very good quality marked by their elevated phenolic levels.