ASb2(SO4)2(PO4) (A = H3O+, K,Rb): Layered Structure Containing Ordered Sulfate and Phosphate Anions

Three compounds ASb₂(SO₄)₂(PO₄) (A = H₃O⁺, K, Rb) were obtained from the reactions of Sb₂O₃, A₂CO₃ (A = Li, Rb) or K₂SO₄ and NH₄H₂PO₄ in H₂SO₄ (98 %) at 220–250 °C. Their structures were determined by single‐crystal X‐ray diffraction. All compounds crystallize in the triclinic space group P$\bar{1}$ (no.2) and are isostructural. The crystal structures consist of two‐dimensional ²_∞[Sb₂(SO₄)₂(PO₄)]^– anionic layers and alkali cations, which are located between anionic layers. The anionic layers are composed of [SbO₄] ψ‐trigonal bipyramids, [SbO₅] ψ octahedra, [SO₄] tetrahedra, and [PO₄] tetrahedra. All compounds are characterized by solid state UV/Vis/NIR diffuse reflectance spectra, FT‐IR spectroscopy, and Raman spectroscopy.     

Tetra­aqua­cobalt(II) bis­[vanadyl(IV) phosphate], [Co(H2O)4][VO(PO4)]2

The structure of [Co(H₂O)₄][VO(PO₄)]₂ is composed of [VO(PO₄)] layers and interlayer tetrahydrated Co²⁺ ions. Alternating VO₅ square pyramids and PO₄ tetrahedra share O‐atom vertices, thus forming the vanadyl phosphate layers. Two vanadyl oxo groups from neighbouring layers are coordinated to each Co atom in a trans fashion, with Co—O distances of 2.157 (4) Å, thus generating a three‐dimensional framework structure.     

Das erste Vanadium(III)‐Borophosphat: Darstellung und Kristallstruktur von CsV3(H2O)2[B2P4O16(OH)4]

The First Vanadium(III) Borophosphate: Synthesis and Crystal Structure of CsV₃(H₂O)₂[B₂P₄O₁₆(OH)₄] CsV₃(H₂O)₂[B₂P₄O₁₆(OH)₄] was prepared under mild hydrothermal conditions (T = 165 °C) from mixtures of CsOH_(aq), VCl₃, H₃BO₃, and H₃PO₄ (molar ratio 1 : 1 : 1 : 2). The crystal structure was determined by X‐ray single crystal methods (monoclinic; space group C2/m, No. 12): a = 958.82(15) pm, b = 1840.8(4) pm, c = 503.49(3) pm; β = 110.675(4)°; Z = 2. The anionic partial structure contains oligomeric units [BP₂O₈(OH)₂]^5–, which are built up by a central BO₂(OH)₂ tetrahedron and two PO₄ tetrahedra sharing common corners. V^III is octahedrally coordinated by oxygen of adjacent phosphate tetrahedra and OH groups of borate tetrahedra as well as oxygen of phosphate tetrahedra and H₂O molecules, respectively (coordination octahedra VO₄(OH)₂ and VO₄(H₂O)₂). The oxidation state +3 for vanadium was confirmed by measurements of the magnetic susceptibility. The trimeric borophosphate groups are connected via vanadium centres to form layers with octahedra‐tetrahedra ring systems, which are likewise linked via V^III‐coordination octahedra. Overall, a three‐dimensional framework constructed from VO₄(OH)₂ and VO₄(H₂O)₂ octahedra as well as BO₂(OH)₂ and PO₄ tetrahedra results. The structure contains channels running along [001], which are occupied by Cs⁺ in a distorted octahedral coordination (CsO₄(H₂O)₂).     

RbGa3(P3O10)2: a new gallium phosphate isotypic with RbAl3(P3O10)2

Rubidium trigallium bis(triphosphate), RbGa₃(P₃O₁₀)₂ has been synthesized by solid‐state reaction and studied by single‐crystal X‐ray diffraction at room temperature. This compound is the first anhydrous gallium phosphate containing both GaO₄ tetra­hedra (Ga1) and GaO₆ octa­hedra (Ga2 and Ga3). The three independent Ga atoms are located on sites with imposed symmetry 2 (Wickoff positions 4a for Ga1 and 4b for Ga2 and Ga3). The GaO₄ and GaO₆ polyhedra are connected through the apices to triphosphate groups and form a three‐dimensionnal host lattice. This framework presents inter­secting tunnels running along the [001] and <110> directions, where the Rb²⁺ cations are located on sites with imposed symmetry 2 (Wickoff position 4a). The structure also exhibits remarkable features, such as infinite helical columns created by the junction of GaO₄ and PO₄ tetra­hedra.     

Magneto-structural study and synthesis optimization of a phosphovanadate copper complex, [Cu(VO)2(PO4)2(H2O)4] n

The optimized synthesis of a phospho-vanadyl compound, [Cu(VO)₂(PO₄)₂(H₂O)₄] _n , is presented and its structural analysis is performed and discussed in relation to magnetic properties. The structure consists of a 2-D skeleton parallel to (100), made up by two independent VO₆ octahedra linked by phosphates. Neighboring 2-D structures stack along [100] and are connected by aqua-mediated H-bonds. The spatial disposition of paramagnetic ions gives rise to weak antiferromagnetic behavior, with J?=??17?cm^?1, which is consistent with a model of three paramagnetic centers in an irregular triangular arrangement. An optimization of the synthesis process, looking for a response surface with optimum experimental values, was performed using a multivariate analysis.     

Crystal structure and cation transport properties of the layered monodiphosphates Rb6Bi4(PO4)2(P2O7)3

Single crystals of the new Bi(III) phosphates, Rb₆Bi₄(PO₄)₂(P₂O₇)₃, have been isolated and their structure has been determined by X-ray diffraction techniques. This compound crystallizes in the monoclinic space group P2₁/c with a=9.077(1)Å, b=9.268(2)Å, c=36.418(6)Å, β=95.75(1)° and Z=8. The crystal structure is made up of BiO₅ and BiO₆ polyhedra sharing the corners with PO₄ tetrahedra and P₂O₇ diphosphate groups. The structure can be described as infinite anionic layers with composition [Bi₄(PO₄)₂(P₂O₇)₃]_∞⁶⁻ parallel to the [301] plane, connected via P-O-Bi bridges to form a three-dimensional open framework. This framework delimits tunnels running along [100] and [010] directions, where the rubidium ions reside. This compound exhibits a rubidium ion conduction but with rather low conductivity value at 640 K.     

Binary salt of a palladium(II) complex with (phosphonomethyl)phosphonic (medronic) acid comprising `handbell‐like' [Pd{μ‐CH2(PO3)2}]3 units

The asymmetric unit of the title compound, dipotassium bis[hexaaquanickel(II)] tris(μ₂‐methylenediphosphonato)tripalladium(II) hexahydrate, K₂[Ni(H₂O)₆]₂[Pd₃{CH₂(PO₃)₂}₃]·6H₂O, consists of half a {[Pd{CH₂(PO₃)₂}]₃}⁶⁻ anion [one Pd atom (4e) and a methylene C atom (4e) occupy positions on a twofold axis] in a rare `handbell‐like' arrangement, with K⁺ and [Ni(H₂O)₆]²⁺ cations to form the neutral complex, completed by three solvent water molecules. The {[Pd{CH₂(PO₃)₂}]₃}⁶⁻ units exhibit close Pd...Pd separations of 3.0469 (4) Å and are packed via intermolecular C—H...Pd hydrogen bonds. The [KO₉] and [NiO₆] units are assembled into sheets coplanar with (011) and stacked along the [100] direction. Within these sheets there are [K₄Ni₄O₈] and [K₂Ni₂O₄] loops. Successive alternation of the sheets and [Pd{CH₂(PO₃)₂}]₃ units parallel to [001] produces the three‐dimensional packing, which is also supported by a dense network of hydrogen bonds involving the solvent water molecules.     

Synthese und Kristallstruktur von Te3O3(PO4)2, einer Verbindung mit fünffach koordiniertem Tellur(IV)

Synthesis and Crystal Structure of Te₃O₃(PO₄)₂, a Compound with 5‐fold Coordinate Tellurium(IV) Polycrystalline Te₃O₃(PO₄)₂ is formed during controlled dehydration of (Te₂O₃)(HPO₄) with (Te₈O₁₀)(PO₄)₄ as an intermediate product. Colourless single crystals were prepared by heating stoichiometric amounts of the binary oxides P₂O₅ und TeO₂ in closed silica glass ampoules at 590 °C for 8 hours. The crystal structure (P2₁/c, Z = 4, α = 12.375(2), b = 7.317(1), c = 9.834(1)Å, β = 98.04(1)°, 1939 structure factors, 146 parameters, R[F² > 2σ(F²)] = 0.0187, wR2(F² all) = 0.0367) was determined from four‐circle diffractometer data and consists of [TeO₅] polyhedra und PO₄ tetrahedra as the main building units. The framework structure is made up of cationic zigzag‐chains of composition [Te₂O₃]²⁺ which extend parallel to [001] and anionic [Te(PO₄)₂]^2— units linked laterally to these chains. This leads to the formation of [Te₂O₃][Te(PO₄)₂] layers parallel to the bc plane which are interconnected via weak Te‐O bonds.     

Poly[tetraamminecopper(II) bis[tris(μ2‐cyanido‐κ2C,N)dicuprate(I)]]: a unique CuI–CuII mixed‐valence complex containing anionic cuprous cyanide layers and [Cu(NH3)4]2+ cations

The title compound, {[Cu(NH₃)₄][Cu(CN)₃]₂}_n, features a Cu^I–Cu^II mixed‐valence CuCN framework based on {[Cu₂(CN)₃]⁻}_n anionic layers and [Cu(NH₃)₄]²⁺ cations. The asymmetric unit contains two different Cu^I ions and one Cu^II ion which lies on a centre of inversion. Each Cu^I ion is coordinated to three cyanide ligands with a distorted trigonal–planar geometry, while the Cu^II ion is ligated by four ammine ligands, with a distorted square‐planar coordination geometry. The interlinkage between Cu^I ions and cyanide bridges produces a honeycomb‐like {[Cu₂(CN)₃]⁻}_n anionic layer containing 18‐membered planar [Cu(CN)]₆ metallocycles. A [Cu(NH₃)₄]²⁺ cation fills each metallocyclic cavity within pairs of exactly superimposed {[Cu₂(CN)₃]⁻}_n anionic layers, but there are no cations between the layers of adjacent pairs, which are offset. Pairs of N—H...N hydrogen‐bonding interactions link the N—H groups of the ammine ligands to the N atoms of cyanide ligands.     

The rich crystal chemistry of the AMM′(PO4)2 morphotropic series: NaZnAl(PO4)2, the first Na representative with a new structure type

A novel phosphate, sodium zinc aluminium bis(phosphate), NaZnAl(PO₄)₂, was obtained under mild‐temperature hydrothermal conditions at 553 K. The crystal structure has been studied using single‐crystal X‐ray experimental data. The pseudo‐hexagonal phase NaZnAl(PO₄)₂ crystallizes in the monoclinic space group P2₁/c. Its unique crystal structure is based on a three‐dimensional (3D) framework built by Zn‐, Al‐ and P‐centred tetrahedra sharing vertices. Channels parallel to the [101] and [01] directions are limited by six‐ and eight‐membered windows, and incorporate Na atoms. The new compound is discussed as a member of the morphotropic series AMM′PO₄, where A = Na, K, Rb or NH₄, M = Cu, Ni, Co, Fe, Zn or Mg and M′ = Fe, Al or Ga. The title compound is the first Na representative within the series and is characterized by a 3D architecture of tetrahedra populated in an ordered manner by Zn²⁺, Al³⁺ and P⁵⁺ ions.     

Novel K/Mn phosphate hydrates,K2Mn3(H2O)2[P2O7]2 and KMn(H2O)2[Al2(PO4)3]: hydrothermal synthesis and crystal chemistry

Two novel K/Mn phosphate hydrates, namely, dipotassium trimanganese dipyrophosphate dihydrate, K₂Mn₃(H₂O)₂[P₂O₇]₂, (I), and potassium manganese dialuminium triphosphate dihydrate, KMn(H₂O)₂[Al₂(PO₄)₃], (II), were obtained in the form of single crystals during a single hydrothermal synthesis experiment. Their crystal structures were studied by X‐ray diffraction. Both new compounds are members of the morphotropic series of phosphates with the following formulae: A₂M₃(H₂O)₂[P₂O₇]₂, where A = K, NH₄, Rb or Na and M = Mn, Fe, Co or Ni, and AM²⁺(H₂O)₂[M³⁺₂(PO₄)₃], where A = Cs, Rb, K, NH₄ or (H₃O); M²⁺ = Mn, Fe, Co or Ni; and M³⁺ = Al, Ga or Fe. A detailed crystal chemical analysis revealed correlations between the unit‐cell parameters of the members of the series, their structural features and the sizes of the cations. It has been shown that a mixed type anionic framework is formed in (II) by aluminophosphate [(AlO₂)₂(PO₄)₂]_∞ layers, with a cationic topology similar to the Si/Al‐topology of the crystal structures of feldspars. A study of the magnetic susceptibility of (II) demonstrates a paramagnetic behaviour of the compound.     

Co0.50VOPO4·2H2O

The crystal structure of cobalt vanadophosphate dihydrate {systematic name: poly[diaqua‐μ‐oxido‐μ‐phosphato‐hemicobalt(II)vanadium(II)]}, Co_0.50VOPO₄·2H₂O, shows a three‐dimensional framework assembled from VO₅ square pyramids, PO₄ tetrahedra and Co[O₂(H₂O)₄] octahedra. The Co^II ions have local 4/m symmetry, with the equatorial water molecules in the mirror plane, while the V and apical O atom of the vanadyl group are located on the fourfold rotation axis and the P atoms reside on sites. The PO₄ tetrahedra connect the VO₅ polyhedra to form a planar P–V–O layer. The [Co(H₂O)₄]²⁺ cations link adjacent P–V–O layers via vanadyl O atoms to generate an unprecedented three‐dimensional open framework. Powder diffraction measurements reveal that the framework collapses on removal of the water molecules.     

Comparative study of two chemically isostructural polymers: [Cu2(VO2)(HPO4)2(NO3)(bpy)2]·2H2O/H3PO4 (bpy is 2,2′‐bi­pyridine)

The title compounds, poly­[bis(2,2′‐bi­pyridine)­bis(μ₃‐hydrogen phosphato)­nitratodi‐μ₂‐oxo‐dicopper(II)­vanadium dihydrate], [Cu₂(VO₂)(HPO₄)₂(NO₃)(C₁₀H₈N₂)₂]·2H₂O, (I), and poly­[bis(2,2′‐bi­pyridine)­bis(μ₃‐hydrogen phosphato)­nitratodi‐μ₂‐oxo‐dicopper(II)­vanadium phospho­ric acid solvate], [Cu₂(VO₂)(HPO₄)₂(NO₃)(C₁₀H₈N₂)₂]·H₃PO₄, (II), were obtained by similar hydro­thermal methods but under different crystallization conditions. The trinuclear entity which serves as the basic unit in both structures presents two independent Cu^II ions immersed in similar square‐pyramidal N₂O₃ environments plus an octahedral VO₆ core and is organized into a one‐dimensional polymer, which is essentially identical in the two structures. The compounds are stabilized by different solvates, viz. two crystallization water mol­ecules in (I) and a phospho­ric acid mol­ecule in (II), which provide the main structural differences through the diversity of interchain interactions in which they serve as bridges.     

A new quaternary thiophosphate,RbNb2(S2)3(PS4)

The structure of the new quaternary thio­phosphate rubidium diniobium tris­(di­sulfide) tetra­thio­phosphate, RbNb₂(S₂)₃(PS₄), is made up of one‐dimensional [Nb₂(S₂)₃(PS₄)^?] chains along the [101] direction, and these chains are separated from one another by Rb⁺ ions. The chain is basically built up from [Nb₂S₁₂] units and tetrahedral [PS₄] groups. The [Nb₂S₁₂] units are linked together to form a linear [Nb₂S₉] chain by sharing the S–S prism edge. Short and long Nb—Nb distances [2.888 (2) and 3.760 (2) Å, respectively] alternate along the chain, and the anionic species S₂^2? and S^2? are observed.     

Ba5Cl4(H2O)8(VPO5)8: a novel three‐dimensional framework solid

The novel hydrothermally synthesized title compound, pentabarium tetrachloride octahydrate octakis(oxovanadium phosphate), Ba₅Cl₄(H₂O)₈(VPO₅)₈, crystallizes in the orthorhombic space group Cmca with a unit cell containing four formula units. Two Ba²⁺ cations, two Cl⁻ anions and the O atoms of four water molecules are situated on the (100) mirror plane, while the third independent Ba²⁺ cation is on the intersection of the (100) plane and the twofold axis parallel to a. Two phosphate P atoms are on twofold axes, while the remaining independent P atom and both V atoms are in general positions. The structure is characterized by two kinds of layers, namely anionic oxovanadium phosphate (VPO₅), composed of corner‐sharing VO₅ square pyramids and PO₄ tetrahedra, and cationic barium chloride hydrate clusters, Ba₅Cl₄(H₂O)₈, composed of three Ba²⁺ cations linked by bridging chloride anions. The layers are connected by Ba—O bonds to generate a three‐dimensional structure.     

Cd2Cu(PO4)2

During an investigation of the insufficiently known system M1O–M2O–X₂O₅–H₂O (M1 = Cd²⁺, Sr²⁺ and Ba²⁺; M2 = Cu²⁺, Ni²⁺, Co²⁺, Zn²⁺ and Mg²⁺; X = P⁵⁺, As⁵⁺ and V⁵⁺), single crystals of the novel compound dicadmium copper(II) bis[phosphate(V)], Cd₂Cu(PO₄)₂, were obtained. This compound belongs to a small group of compounds adopting a Cu₃(PO₄)₂‐type structure and having the general formula M1₂M2(XO₄)₂ (M1/M2 = Cd²⁺, Cu²⁺, Mg²⁺ and Zn²⁺; X = As⁵⁺, P⁵⁺ and V⁵⁺). The crystal structure is characterized by the interconnection of infinite [Cu(PO₄)₂]_n chains and [Cd₂O₁₀]_n double chains, both extending along the a axis. Exceptional characteristics of this structure are its novel chemical composition and the occurrence of double chains of CdO₆ polyhedra that were not found in related structures. In contrast to the isomorphous compounds, where the M1 cations are coordinated by five O atoms, the Cd atom is coordinated by six. The dissimilarity in the geometry of M1 coordination between Cd₂Cu(PO₄)₂ and the isomorphous compounds is mostly due to the larger ionic radius of the Cd cation in comparison with the Cu, Mg and Zn cations. Sharing a common edge, two CdO₆ polyhedra form Cd₂O₁₀ dimers. Each such dimer is bonded to another dimer sharing common vertices, forming [Cd₂O₁₀]_n double chains in the [100] direction. The Cu atoms, located on an inversion centre (site symmetry ), form isolated CuO₄ squares interconnected by PO₄ tetrahedra, forming [Cu(PO₄)₂]_n chains similar to those found in related structures. Conversely, the [Cd₂O₁₀]_n double chains, which were not found in related structures, are an exclusive feature of this structure.     

An Organically Templated Copper Pentaborate with Infinite Metallo-chains:[Cu(C3N2H4)4][Cu(CH3COO)2(C3N2H4)2(H2O)2][B5O6(OH)4]2

A novel organically templated copper pentaborate, [Cu(C₃N₂H₄)₄][Cu(CH₃COO)₂(C₃N₂H₄)₂(H₂O)₂]‐ [B₅O₆(OH)₄]₂, was synthesized by hydrothermal reaction and characterized by elemental analysis, single‐crystal X‐ray diffraction, FT‐IR spectroscopy, Raman spectroscopy and TGA. The crystal structure of this compound consists of two copper‐centered polyhedra and two discrete [B₅O₆(OH)₄]^? pentaborate anions, which are linked together through intensive hydrogen bonding interactions, forming a 3D framework with large channels along c axis. The discrete pentaborate anions form infinite layers by hydrogen bonds. Moreover, the two crystallographically different octahedral coppers are connected by common oxygen atom to form an infinite chain.     

K3Ga2(PO4)3 and Na3Ga(PO4)2

The structures of tripotassium digallium tris(phosphate), K₃Ga₂(PO₄)₃, and trisodium gallium bis(phosphate), Na₃Ga(PO₄)₂, have different irregular one‐dimensional alkali ion‐containing channels along the a axis of the orthorhombic and triclinic unit cells, respectively. The anionic subsystems consist of vortex‐linked PO₄ tetrahedra and GaO₄ tetrahedra or GaO₅ trigonal bipyramids in the first and second structure, respectively.     

The iron phosphate NaZnFe2(PO4)3

Crystals of sodium zinc diiron(III) triphosphate, NaZnFe₂(PO₄)₃, have been synthesized and structurally characterized by single‐crystal X‐ray diffraction. The compound features a new structural type built up from ZnO₆ octahedra, FeO₆ octahedra and FeO₄ tetrahedra, linked together via the corners and edges of PO₄ tetrahedra to form a three‐dimensional framework, with tunnels running along [100]. Within these tunnels, Na⁺ cations occupy a highly distorted cubic site.     

Syntheses,crystal structures and optical properties of two one‐dimensional germanophosphates: HRb3Ge2(HPO4)6 and CsGe(HPO4)2(OH)

Germanophosphates, as a young class of metal phosphates, have been less reported but might possess more diverse structural types and potential applications. Here, two one‐dimensional (1D) alkali‐metal germanophosphates (GePOs), namely, hydrogen hexakis(μ‐hydrogen phosphato)digermaniumtrirubidium, HRb₃Ge₂(HPO₄)₆ ( 1 ), and caesium bis(μ‐hydrogen phosphato)(μ‐hydroxido)germanium, CsGe(HPO₄)₂(OH) ( 2 ), have been prepared by the solvothermal method. Compound 1 shows 1D [Ge(HPO₄)₆]_∞ chains along the c axis formed by GeO₆ octahedra and PO₄ tetrahedra, with Rb⁺ cations dissociated between the chains. Compound 2 also exhibits 1D [Ge(HPO₄)₄(OH)₂]_∞ chains constructed from adjacent Ge(HPO₄)₄(OH)₂ octahedra, with Cs⁺ cations dissociated between the chains. XRD, TGA, IR and UV–Vis–NIR absorption spectra are presented and discussed for both compounds.