Separation of 1,3,5,7‐tetranitro‐1,3,5,7‐tetraazacyclooctane and 1,3,5‐trinitro‐1,3,5‐ triazacyclohexane by molecularly imprinted solid‐phase extraction

Synthesis of 1,3,5,7‐tetranitro‐1,3,5,7‐tetraazacyclooctane and 1,3,5‐trinitro‐1,3,5‐triazacyclohexane by the Bachmann process leads to a mixture of both. The separation of 1,3,5,7‐tetranitro‐1,3,5,7‐tetraazacyclooctane and 1,3,5‐trinitro‐1,3,5‐triazacyclohexane from their mixture is difficult because the sizes and physical properties of these homologous compounds are similar. For this purpose, seven molecularly imprinted polymers have been synthesized for each explosive, and a selective solid‐phase extraction procedure has been developed. A molecularly imprinted polymer, synthesized with 1,3,5,7‐tetranitro‐1,3,5,7‐tetraazacyclooctane as the template, methacrylic acid as the monomer and trimethylolpropane trimethacrylate as the cross‐linking agent in a molar ratio of 1:8:8 showed the best separation capability. A packed cartridge containing this polymer can be reused for 23 solid‐phase extraction cycles without repacking, and the total separation capability toward 1,3,5,7‐tetranitro‐1,3,5,7‐tetraazacyclooctane reached 6.81 mg per gram of polymer. 1,3,5‐Trinitro‐1,3,5‐triazacyclohexane was not detected in the separated 1,3,5,7‐tetranitro‐1,3,5,7‐tetraazacyclooctane by high‐performance liquid chromatography and vice versa. This newly developed method had the advantages of high recovery (100%) and purity, environmental friendliness, and room temperature operability. This study showed that some molecularly imprinted polymers that cannot absorb target analytes well in the solvent in which the polymers were polymerized might have high‐binding capacity for the analytes and show imprinting effects in other solvents.     

Facile preparation of 7,11‐di(4‐nitrobenzenesulfonyl)‐diaza‐1,4‐dioxa‐7,11‐spiro[4,7]dodecan‐9‐one

Compound 1 as a key intermediate for the synthesis of 3,3,7,7‐tetrakis‐(difluoroamino)octahydro‐1,5‐dinitro‐1,5‐diazocine (HNFX) and 3,3‐bis(difluoroamino)octahydro‐1,5,7,7‐tetranitro‐1,5‐diazocine (TNFX) is described. Cycloalkylation of 3 with 1,3‐dibromopropan‐2‐ol ( 4 ) afforded 1,5‐protected‐1,5‐diazocine 2 , followed by chromic acid oxidation to ketone 1 in good yield.     

Energetic Derivatives of 4, 4′,5, 5′‐Tetranitro‐2, 2′‐bisimidazole (TNBI)

4, 4′,5, 5′‐Tetranitro‐2, 2′‐bisimidazole (TNBI) was synthesized by nitration of bisimidazole (BI) and recrystallized from acetone to form a crystalline acetone adduct. Its ammonium salt ( 1 ) was obtained by the reaction with gaseous ammonia. In order to explore new explosives or propellants several energetic nitrogen‐rich 2:1 salts such as the hydroxylammonium ( 3 ), guanidinium ( 4 ), aminoguanidinium ( 5 ), diaminoguanidinium ( 6 ) and triaminoguanidinium 7 4, 4′,5, 5′‐tetranitro‐2, 2′‐bisimidazolate were prepared by facile metathesis reactions. In addition, methylated 1, 1′‐dimethyl‐4, 4′,5, 5′‐tetranitro‐2, 2′‐bisimidazole (Me₂TNBI, 8 ) was synthesized by the reaction of 2 and dimethyl sulfate. Metal salts of TNBI can also be easily synthesized by using the corresponding metal bases. This was proven by the synthesis of pyrotechnically relevant dipotassium 4, 4′,5, 5′‐tetranitro‐2, 2′‐bisimidazolate ( 2 ), which is a brilliant burning component e.g. in near‐infrared flares. All compounds were characterized by single crystal X‐ray diffraction, NMR and vibrational spectroscopy, elemental analysis and DSC. The sensitivities were determined by BAM methods (drophammer and friction tester). The heats of formation were calculated using CBS‐4M electronic enthalpies and the atomization method. With these values and mostly the X‐ray densities different detonation parameters were computed by the EXPLO5 computer code. Due to the great thermal stability and calculated energetic properties, especially guanidinium salt 4 could be served as a HNS replacement.     

The Environmentally Friendly Energetic Salt (ATZ)(TNPG) Based on 4‐Amino‐1, 2, 4‐triazole (ATZ) and Trinitrophloroglucinol (TNPG)

The environmentally friendly energetic salt (ATZ)(TNPG) (ATZ = 4‐amino‐1, 2, 4‐triazole, TNPG = trinitrophloroglucinol) was synthesized and characterized by elemental analysis and FT‐IR spectroscopy. The crystal structure was determined by X‐ray single crystal diffraction. It crystallizes in monoclinic space group P2₁/c and its crystal density is 1.832 g · cm^–3. Thermal decomposition mechanisms were investigated through differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). In addition, the experimental data showed that the energy of combustion was approximately equal to the energies of combustion of RDX (1, 3, 5‐trinitro‐1, 3, 5‐triazacyclohexane) and HMX (1, 3, 5, 7‐tetranitro‐1, 3, 5, 7‐tetraazocane). The non‐isothermal kinetics parameters were also studied by applying Kissinger's, Ozawa's, and Starink's methods. Determination of the sensitivities revealed higher sensitivities of (ATZ)(TNPG) as compared to (ATZ)(PA) (PA = picrate).     

反式-1,4,5,8-四硝基-1,4,5,8-四氮杂萘烷异构体热解机理与稳定性的理论研究

运用密度泛函理论和半经验分子轨道方法,对一系列高能杂环硝胺—反式-1,4,5,8-四硝基-1,4,5,8-四氮杂萘烷异构体的热解机理和稳定性进行了系统地计算研究。在B3LYP/6-31G**和PM3水平上,分别计算了标题物的化学键离解能(BDE)和热解反应活化能(Ea),并根据BDE和Ea数值考察了硝胺取代基对化合物稳定性和热解机理的影响;同时,还详细考察了BDE与Ea、化学键重叠布居数、前线轨道能级以及能隙之间的相关性。结果表明,由BDE、Ea和静态电子结构参数推断的标题物热稳定性和热解机理的结论基本是一致的,N-NO2键均裂是标题物的热解引发步骤,间位取代异构体较对位取代异构体稳定,而邻位取代的异构体稳定性最差。     

Polynitro‐Functionalized Dipyrazolo‐1,3,5‐triazinanes: Energetic Polycyclization toward High Density and Excellent Molecular Stability

A new fused N‐heterocyclic framework, dipyrazolo‐1,3,5‐triazinane, was synthesized and the physiochemical properties of its derivatives were investigated to evaluate the integrated energetic performance. In contrast to 1,3,5‐trinitro‐1,3,5‐triazinane (RDX) featuring a distorted chair confirmation, polynitro‐functionalized dipyrazolo‐1,3,5‐triazinanes have nearly planar backbones, thereby enhancing the density and thermal stability. Among these new energetic tricyclic compounds, 5 a and 12 show favorable crystal densities of 1.937 g cm⁻³ and 1.990 g cm⁻³ at 150 K, respectively, which rank highest in triazinane‐based energetic compounds. Additionally, this synthetic approach was carried out to form seven‐membered and eight‐membered rings, giving rise to tetranitro dipyrazolo‐1,3,5‐triazepane ( 5 b ) and tetranitro dipyrazolo‐1,3,5‐triazocane ( 5 c ), respectively.     

Polymorphism of 3‐(5‐phenyl‐1,3,4‐oxadiazol‐2‐yl)‐ and 3‐[5‐(pyridin‐4‐yl)‐1,3,4‐oxadiazol‐2‐yl]‐2H‐chromen‐2‐ones

This study of 3‐(5‐phenyl‐1,3,4‐oxadiazol‐2‐yl)‐2H‐chromen‐2‐one, C₁₇H₁₀N₂O₃, 1 , and 3‐[5‐(pyridin‐4‐yl)‐1,3,4‐oxadiazol‐2‐yl]‐2H‐chromen‐2‐one, C₁₆H₉N₃O₃, 2 , was performed on the assumption of the potential anticancer activity of the compounds. Three polymorphic structures for 1 and two polymorphic structures for 2 have been studied thoroughly. The strongest intermolecular interaction is stacking of the `head‐to‐head' type in all the studied crystals. The polymorphic structures of 1 differ with respect to the intermolecular interactions between stacked columns. Two of the polymorphs have a columnar or double columnar type of crystal organization, while the third polymorphic structure can be classified as columnar‐layered. The difference between the two structures of 2 is less pronounced. Both crystals can be considered as having very similar arrangements of neighbouring columns. The formation of polymorphic modifications is caused by a subtle balance of very weak intermolecular interactions and packing differences can be identified only using an analysis based on a study of the pairwise interaction energies.     

Synthesis of (−)‐3‐Carene‐2,5‐dione via Allylic Oxidation of (+)‐3‐Carene

Activated carbon‐supported CuCl₂ (CuCl₂/AC) is a heterogeneous catalyst for the liquid‐phase selective allylic oxidation of (+)‐3‐carene with tert‐butyl hydroperoxide (TBHP) and O₂ to produce (?)‐3‐carene‐2,5‐dione. The possible reaction mechanism and the effects of different factors on the allylic oxidation were investigated. The optimal conditions are as follows: reaction temperature, 45 °C; molar ratio of CuCl₂ to (+)‐3‐carene, 1%; volume ratio of (+)‐3‐carene to TBHP, 1:3; and reaction time, 12 h. Under the optimal conditions, the conversion of (+)‐3‐carene reached 100%, whereas the selectivity for (?)‐3‐carene‐2,5‐dione reached 78%. The CuCl₂/AC catalyst was characterized via X‐ray diffraction, and the chemical structure of the target compound was identified via infrared spectroscopy, proton nuclear magnetic resonance spectroscopy, mass spectrometry, and optical analysis.     

A first‐principles investigation of the hydrogen bond interaction and the sensitive characters in cis‐1,3,4,6‐tetranitrooctahydroimidazo‐[4,5‐d]imidazole

A theoretical study of structural and electronic properties of cis‐1,3,4,6‐tetranitrooctahydroimidazo‐[4,5‐d]imidazole (BCHMX) crystal is performed using density functional theory. The band structure, the total density of states, the atomic orbit projected density of states (PDOS) of C, N, O, and H, and Mulliken population analysis are discussed. The study by analyzing the PDOS shows that the structure of BCHMX crystal possesses C? H···O intra‐ and intermolecular hydrogen bonding. There are hydrogen bonds between H₃‐1s and O₅‐2p orbits, H₂‐1s and O₆‐2p orbits of intramolecules and between H₂‐1s and O₁‐2p orbits of intermolecules. The reasons for the smaller impact sensitivity compared with β‐1,3,5,7‐tetranitro‐1,3,5,7‐tetrazocane and 1,3,5‐trinitro‐1,3,5‐triazinane are also explored from the band gap in the crystal and the weakest bond dissociation energy in single molecule. © 2011 Wiley Periodicals, Inc. Int J Quantum Chem, 2011     

Report on an Unusual Cascade Reaction between Azulenes and 2,3‐Dichloro‐5,6‐dicyano‐1,4‐benzoquinone (=4,5‐Dichloro‐3,6‐dioxocyclohexa‐1,4‐diene‐1,2‐dicarbonitrile; DDQ)

The oxidation of 1‐(3,8‐dimethylazulen‐1‐yl)alkan‐1‐ones 1 with 2,3‐dichloro‐5,6‐dicyano‐1,4‐benzoquinone (=4,5‐dichloro‐3,6‐dioxocyclohexa‐1,4‐diene‐1,2‐dicarbonitrile; DDQ) in acetone/H₂O mixtures at room temperature does not only lead to the corresponding azulene‐1‐carboxaldehydes 2 but also, in small amounts, to three further products (Tables 1 and 2). The structures of the additional products 3 – 5 were solved spectroscopically, and that of 3a also by an X‐ray crystal‐structure analysis (Fig. 1). It is demonstrated that the bis(azulenylmethyl)‐substituted DDQ derivatives 5 yield on methanolysis or hydrolysis precursors, which in a cascade of reactions rearrange under loss of HCl into the pentacyclic compounds 3 (Schemes 4 and 7). The found 1,1′‐[carbonylbis(8‐methylazulene‐3,1‐diyl)]bis[ethanones] 4 are the result of further oxidation of the azulene‐1‐carboxaldehydes 2 to the corresponding azulene‐1‐carboxylic acids (Schemes 9 and 10).     

Synthesis,structure and biological activity of new 6,6‐dimethyl‐2‐oxo‐4‐{2‐[5‐organylsilyl(germyl)]furan(thiophen)‐2‐yl}vinyl‐5,6‐dihydro‐2H‐pyran‐3‐carbonitriles

New 6,6‐dimethyl‐2‐oxo‐4‐{2‐[5‐alkylsilyl(germyl)]furan(thiophen)‐2‐yl}vinyl‐5,6‐dihydro‐2H‐pyran‐3‐carbonitriles (IC₅₀: 1–6 µg ml^?1) have been prepared by the condensation of corresponding silicon‐ and germanium‐containing furyl(thienyl)‐2‐carbaldehydes with 3‐cyano‐4,6,6‐trimethyl‐5,6‐dihydropyran‐2‐one using piperidine acetate as a catalyst. The obtained carbonitriles were identified using NMR (¹H, ¹³C and ²⁹Si) spectroscopy and GC‐MS. The structure of 6,6‐dimethyl‐2‐oxo‐4‐[2‐(5‐trimethylsilyl)thiophen‐2‐yl]‐5,6‐dihydro‐2H‐pyran‐3‐carbonitrile was studied using X‐ray diffractometry. The influences of the heterocycle and the structure of the organoelement substituent on cytotoxicity and on matrix metalloproteinase inhibition have been studied. Copyright © 2015 John Wiley & Sons, Ltd.     

Selenium‐Containing Heterocycles from Isoselenocyanates: Synthesis of 5‐Amino‐2,4‐dihydro‐3H‐1,2,4‐triazole‐3‐selones

The reaction of S‐methylisothiosemicarbazide hydroiodide (=S‐methyl hydrazinecarboximidothioate hydroiodide; 1 ), prepared from thiosemicarbazide by treatment with MeI in EtOH, and aryl isoselenocyanates 5 in CH₂Cl₂ affords 3H‐1,2,4‐triazole‐3‐selone derivatives 7 in good yield (Scheme 2, Table 1). During attempted crystallization, these products undergo an oxidative dimerization to give the corresponding bis(4H‐1,2,4‐triazol‐3‐yl) diselenides 11 (Scheme 3). The structure of 11a was established by X‐ray crystallography.     

Synthesis,structure and cytotoxicity of new 2‐[(3‐aminopropyl)dimethylsilyl]‐5‐furfural diethylacetals and 2‐[(3‐aminopropyl)dimethylsilyl]‐5‐phenylfurans

Novel 2‐[(3‐aminopropyl)dimethylsilyl]‐5‐furfural diethylacetals and 2‐[(3‐aminopropyl)di‐methylsilyl]‐5‐phenylfurans have been synthesized by a hydrosilylation reaction of aliphatic and heterocyclic N‐allylamines in the presence of the Speier's catalyst. The effects of the structure of the amine and nature of organic substituent at the furan ring on the cytotoxicity of the new compounds have been studied. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis and Fungicidal Activity of (E)‐5‐[1‐(2‐Oxo‐1‐oxaspiro[4,5]dec/non‐3‐en‐3‐yl)ethylidene]‐2‐aminoimidazolin‐4‐one Derivatives

The novel fungicidal agents, (E )‐5‐[1‐(2‐oxo‐1‐oxaspiro[4,5]dec/non‐3‐en‐3‐yl)ethylidene]‐2‐aminoimidazolin‐ 4‐one derivatives, were designed and synthesized in moderate to excellent yields in four steps using α ‐hydroxyketone and diketene as raw materials and characterized by HR‐ESI‐MS , ¹H NMR and X‐ray diffraction. The preliminary bioassay showed that some of these compounds, such as 5e , 6a , 6e , and 7 h exhibit 87.8%, 91.3%, 89.9% and 87.8% inhibition rates against Sclerotinia scleotiorum , 3b , 3c , 4c and 7 h exhibit 96.4%, 92.5%, 90.3% and 76.9% inhibition rates against Phytophthora capsici at the concentration of 50 µg/mL , respectively. These compounds exhibited significant fungicidal activities against S. scleotiorum and P. capsici with EC₅₀ values of 2.56–11.60 µg/mL , and compounds 6e and 7 h exhibited weak inhibition against the spore germination of S. scleotiorum , while the spore germination of P. capsici was strongly inhibited by compound 7 h solution. Scanning electron microscopy (SEM ) and transmission electron microscopy (TEM ) observation indicated that compound 7 h had a significant impact on the structure and function of the hyphal cell wall of P. capsici mycelium.     

1,2‐Diaza‐3‐silacyclopent‐5‐ene – Synthese und Reaktionen

1,2‐Diaza‐3‐silacyclopent‐5‐ene – Synthesis and Reactions The dilithium salt of bis(tert‐butyl‐trimethylsilylmethylen)ketazine ( 1 ) forms an imine‐enamine salt. 1 reacts with halosilanes in a molar ratio of 1:1 to give 1,2‐diaza‐3‐silacyclopent‐5‐enes. Me₃SiCH=CCMe₃ [N(SiR,R′)‐N=C‐C]HSiMe₃ ( 2 ‐ 7 ). ( 2 : R,R′ = Cl; 3 : R = CH₃, R′ = Ph; 4 : R = F, R′ = CMe₃; 5 : R = F, R′ = Ph; 6 : R = F, R′ = N(SiMe₃)₂; 7 : R = F, R′ = N(CMe₃)SiMe₃). In the reaction of 1 with tetrafluorosilane the spirocyclus 8 is isolated. The five‐membered ring compounds 2 ‐ 7 and compound 9 substituted on the silicon‐fluoro‐ and (tert‐butyltrimethylsilyl) are acid at the C(4)‐atom and therefore can be lithiated. Experiments to prepare lithium salts of 4 with MeLi, n‐BuLi and PhLi gave LiF and the substitution‐products 10 ‐ 12 . 9 forms a lithium salt which reacts with ClSiMe₃ to give LiCl and the SiMe₃ ring system ( 13 ) substituted at the C(4)‐atom. The ring compounds 3 ‐ 7 and 10 ‐ 12 form isomers, the formation is discussed. Results of the crystal structure and analyses of 8 , 10 , 12 , and 13 are presented.     

N‐Oxide 1,2,4,5‐Tetrazine‐Based High‐Performance Energetic Materials

One route to high density and high performance energetic materials based on 1,2,4,5‐tetrazine is the introduction of 2,4‐di‐N‐oxide functionalities. Based on several examples and through theoretical analysis, the strategy of regioselective introduction of these moieties into 1,2,4,5‐tetrazines has been developed. Using this methodology, various new tetrazine structures containing the N‐oxide functionality were synthesized and fully characterized using IR, NMR, and mass spectroscopy, elemental analysis, and single‐crystal X‐ray analysis. Hydrogen peroxide (50 %) was used very effectively in lieu of the usual 90 % peroxide in this system to generate N‐oxide tetrazine compounds successfully. Comparison of the experimental densities of N‐oxide 1,2,4,5‐tetrazine compounds with their 1,2,4,5‐tetrazine precursors shows that introducing the N‐oxide functionality is a highly effective and feasible method to enhance the density of these materials. The heats of formation for all compounds were calculated with Gaussian 03 (revision D.01) and these values were combined with measured densities to calculate detonation pressures (P) and velocities (ν_D) of these energetic materials (Explo 5.0 v. 6.01). The new oxygen‐containing tetrazines exhibit high density, good thermal stability, acceptable oxygen balance, positive heat of formation, and excellent detonation properties, which, in some cases, are superior to those of 1,3,5‐tritnitrotoluene (TNT), 1,3,5‐trinitrotriazacyclohexane (RDX), and octahydro‐1,3,5,7‐tetranitro‐1,3,5,7‐tetrazocine (HMX).     

DPPH (= 2,2‐Diphenyl‐1‐picrylhydrazyl = 2,2‐Diphenyl‐1‐(2,4,6‐trinitrophenyl)hydrazyl) Radical‐Scavenging Reaction of Protocatechuic Acid Esters (= 3,4‐Dihydroxybenzoates) in Alcohols: Formation of Bis‐alcohol Adduct

Protocatechuic acid esters (= 3,4‐dihydroxybenzoates) scavenge ca. 5 equiv. of radical in alcoholic solvents, whereas they consume only 2 equiv. of radical in nonalcoholic solvents. While the high radical‐scavenging activity of protocatechuic acid esters in alcoholic solvents as compared to that in nonalcoholic solvents is due to a nucleophilic addition of an alcohol molecule at C(2) of an intermediate o‐quinone structure, thus regenerating a catechol (= benzene‐1,2‐diol) structure, it is still unclear why protocatechuic acid esters scavenge more than 4 equiv. of radical (C(2) refers to the protocatechuic acid numbering). Therefore, to elucidate the oxidation mechanism beyond the formation of the C(2) alcohol adduct, 3,4‐dihydroxy‐2‐methoxybenzoic acid methyl ester ( 4 ), the C(2) MeOH adduct, which is an oxidation product of methyl protocatechuate ( 1 ) in MeOH, was oxidized by the DPPH radical (= 2,2‐diphenyl‐1‐picrylhydrazyl) or o‐chloranil (= 3,4,5,6‐tetrachlorocyclohexa‐3,5‐diene‐1,2‐dione) in CD₃OD/(D₆)acetone 3 : 1). The oxidation mixtures were directly analyzed by NMR. Oxidation with both the DPPH radical and o‐chloranil produced a C(2),C(6) bis‐methanol adduct ( 7 ), which could scavenge additional 2 equiv. of radical. Calculations of LUMO electron densities of o‐quinones corroborated the regioselective nucleophilic addition of alcohol molecules with o‐quinones. Our results strongly suggest that the regeneration of a catechol structure via a nucleophilic addition of an alcohol molecule with a o‐quinone is a key reaction for the high radical‐scavenging activity of protocatechuic acid esters in alcoholic solvents.     

Synthesis and Molecular Structure of New S‐Nucleosides of 5‐(4‐Pyridyl)‐4‐Aryl‐4H‐1,2,4‐Triazole‐3‐Thiols

The synthesis of some new S‐nucleosides of 5‐(4‐pyridyl)‐4‐aryl‐4H‐1,2,4‐triazole‐3‐thiols ( 4a‐n ) is described. Direct glycosylation of ( 4a‐n ) with tetra‐O‐acetyl‐α‐D‐glucopyranosyl bromide in the presence of potassium hydroxide followed by deacetylation using dry ammonia in methanol gave the corresponding 3‐S‐(ñ‐D‐glucopyranosyl)‐5‐(4‐pyridyl)‐4‐aryl‐4H‐1,2,4‐triazoles ( 6a‐n ) in good yields. All the compounds were fully characterized by means of ¹HNMR, ¹³C NMR spectra and elemental analyses. To assist in the interpretation of the spectroscopic data, the crystal structure of 3‐S‐(2′,3′,4′,6′‐tetra‐O‐acetyl‐β‐D‐glucopyranosyl)‐5‐(4‐pyridyl)‐4‐phenyl‐4H‐1,2,4‐triazole ( 5a ) was determined by X‐ray diffraction.     

Synthesis,Characterization and Migration of Ionic Polyferrocenyl Compounds of 5‐Ferrocenyl‐1H‐tetrazole and Their Effects During Combustion

Eighteen ionic polyferrocenyl compounds with 5‐ferrocenyl‐1H‐tetrazolate as anion and mono‐ and dinuclear ferrocenyl‐alkylammonium as cations were synthesized and characterized by ¹H NMR, ¹³C NMR, FT‐IR, and UV/Vis spectroscopy, and elemental analysis. Molecular structures of three compounds were further confirmed by single‐crystal X‐ray diffraction. Their thermal stability was evaluated by TG and DSC and found that they are of high thermal stability. The cyclic voltammetry analysis suggested that each of the compounds exhibits only an irreversible redox wave of the ferrocene units in the molecule. Both migration and volatility test results showed that, on comparison with those of Catocene, all tested compounds exhibit much more excellent anti‐migration ability and most of the tested compounds have lower volatility. Their effects on the thermal disintegration of ammonium perchlorate (AP), 1,3,5‐trinitro‐1,3,5‐triazacyclohexane (RDX), and 1,2,5,7‐tetranitro‐1,3,5,7‐tetraazacyclooctane (HMX) were measured by DSC. The results revealed that most of the compounds exhibit significant catalytic effects on the thermal degradation of AP and RDX. Particularly, most of the compounds containing one ferrocene unit in their cations show higher activity than that of Catocene. These compounds can be used as alternatives to Catocene in the composite solid propellants.     

Reaktionen von 1,1,3,3‐Tetrakis(dimethylamino)‐1 λ5, 3 λ5‐diphosphet mit 5‐Cyano‐1‐pentin und mit 2‐(Cyanmethyl)‐1‐methylpyrrol

Diphosphabenzenes. VII. Reactions of 1,1,3,3‐Tetrakis(dimethylamino)‐1 λ⁵, 3 λ⁵‐diphosphete with 5‐Cyano‐1‐pentine and 2‐(Cyanomethyl)‐1‐methylpyrrol 5‐Cyano‐1‐pentine reacts with the equimolar amount of the λ⁵‐diphosphete 1 to give the λ⁵‐diphosphinine (λ⁵‐diphosphabenzene) ( 3 ), while reaction with the double equimolar amount of 1 yields the λ⁵‐diphosphinine ( 4 ). The acyclic compount 6 is the main product of the reaction between 1 and 2‐(cyanomethyl)‐1‐methylpyrrol, 5 . Melting points of 4 · CH₃CN and 6 , and mass, nmr and ir spectra of 3 , 4 , and 6 are reported. The crystal structure of 4 · CH₃CN shows an open‐chain ylidic CPCP‐sequence, which is linked to a λ⁵‐diphosphinine via an ethylene bridge. The X‐ray structure analysis of 6 confirms the existence as an acyclic conjugated double ylid.